From: Fabian Frederick <fabf@skynet.be>
Date: Sun, 20 Jul 2014 14:25:18 +0000 (+0200)
Subject: e1000: remove unnecessary break after return
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4097ae93b8e01a669ac2c7f3fdda52295bbc8f1d;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git

e1000: remove unnecessary break after return

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index d50f78afb56d..cca5bca44e73 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1316,7 +1316,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82547:
 	case e1000_82547_rev_2:
 		return e1000_integrated_phy_loopback(adapter);
-		break;
 	default:
 		/* Default PHY loopback work is to read the MII
 		 * control register and assert bit 14 (loopback mode).
@@ -1325,7 +1324,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 		phy_reg |= MII_CR_LOOPBACK;
 		e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
 		return 0;
-		break;
 	}
 
 	return 8;
@@ -1344,7 +1342,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		case e1000_82545_rev_3:
 		case e1000_82546_rev_3:
 			return e1000_set_phy_loopback(adapter);
-			break;
 		default:
 			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index e9b07ccc0eba..1acf5034db10 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -902,7 +902,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	default:
 		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
-		break;
 	}
 
 	/* Since auto-negotiation is enabled, take the link out of reset (the
@@ -5041,7 +5040,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 			break;
 		default:
 			return -E1000_ERR_PHY;
-			break;
 		}
 	} else if (hw->phy_type == e1000_phy_igp) {	/* For IGP PHY */
 		u16 cur_agc_value;