From: Thomas Gleixner Date: Sun, 2 Jul 2006 02:29:43 +0000 (-0700) Subject: [PATCH] irq-flags: serial: Use the new IRQF_ constants X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=40663cc7f1c1ccf515d8af9470925a0cb2f59b5d;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git [PATCH] irq-flags: serial: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner Cc: Ingo Molnar Cc: "David S. Miller" Cc: Benjamin Herrenschmidt Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 9c5d36f50140..0995430e4cf1 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -48,7 +48,7 @@ /* * Configuration: - * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option * is unsafe when used on edge-triggered interrupts. */ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; @@ -1400,7 +1400,7 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) static int serial_link_irq_chain(struct uart_8250_port *up) { struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; spin_lock_irq(&i->lock); diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 7b3b3f3d5101..a7d664383dae 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -387,7 +387,7 @@ static int at91_startup(struct uart_port *port) /* * Allocate the IRQ */ - retval = request_irq(port->irq, at91_interrupt, SA_SHIRQ, "at91_serial", port); + retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port); if (retval) { printk("at91_serial: at91_startup - Can't get irq\n"); return retval; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 901be3483455..cabd048c8636 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -415,7 +415,7 @@ * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when * closing the last filehandle, NASTY!. * Added break generation, not tested though! - * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1. + * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1. * You can't use them at the same time (yet..), but you can hopefully switch * between ser2/par0, ser3/par1 with the same kernel config. * Replaced some magic constants with defines @@ -4942,55 +4942,55 @@ rs_init(void) /* Not needed in simulator. May only complicate stuff. */ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL)) + if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL)) panic("irq8"); #ifdef CONFIG_ETRAX_SERIAL_PORT0 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL)) + if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL)) panic("irq22"); #endif #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL)) + if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL)) panic("irq23"); #endif #endif #ifdef CONFIG_ETRAX_SERIAL_PORT1 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL)) + if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL)) panic("irq24"); #endif #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL)) + if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL)) panic("irq25"); #endif #endif #ifdef CONFIG_ETRAX_SERIAL_PORT2 /* DMA Shared with par0 (and SCSI0 and ATA) */ #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL)) + if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL)) panic("irq18"); #endif #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL)) + if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL)) panic("irq19"); #endif #endif #ifdef CONFIG_ETRAX_SERIAL_PORT3 /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */ #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL)) + if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL)) panic("irq20"); #endif #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL)) + if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL)) panic("irq21"); #endif #endif #ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST - if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT, + if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED, "fast serial dma timeout", NULL)) { printk(KERN_CRIT "err: timer1 irq\n"); } diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index ecf824bd2d4e..d119c8296a78 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -797,7 +797,7 @@ int __init dz_init(void) restore_flags(flags); if (request_irq(dz_ports[0].port.irq, dz_interrupt, - SA_INTERRUPT, "DZ", &dz_ports[0])) + IRQF_DISABLED, "DZ", &dz_ports[0])) panic("Unable to register DZ interrupt"); ret = uart_register_driver(&dz_reg); diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index ad1e753cbc53..a3c00a252149 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1563,7 +1563,7 @@ static int __devinit icom_probe(struct pci_dev *dev, /* save off irq and request irq line */ if ( (retval = request_irq(dev->irq, icom_interrupt, - SA_INTERRUPT | SA_SHIRQ, ICOM_DRIVER_NAME, + IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME, (void *) icom_adapter))) { goto probe_exit2; } diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 0b5f39d038b9..4a142d6b8f38 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -404,7 +404,7 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; retval = request_irq(sport->rtsirq, imx_rtsint, - SA_TRIGGER_FALLING | SA_TRIGGER_RISING, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, DRIVER_NAME, sport); if (retval) goto error_out3; diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 717e47bbd784..576ca1eaa2b6 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -2855,7 +2855,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) control->ic_soft = soft; /* Hook up interrupt handler */ - if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ, + if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED, "sgi-ioc4serial", soft)) { control->ic_irq = idd->idd_pdev->irq; } else { diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index b3e1f71be4da..244f63be3a03 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -121,7 +121,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) } rc = request_irq(brd->irq, brd->bd_ops->intr, - SA_INTERRUPT|SA_SHIRQ, "JSM", brd); + IRQF_DISABLED|IRQF_SHARED, "JSM", brd); if (rc) { printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); goto out_iounmap; diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index fbaae96f4c93..e7fe4bb46eca 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -542,7 +542,7 @@ static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) static int serial_link_irq_chain(struct uart_sio_port *up) { struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; spin_lock_irq(&i->lock); diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index 29c0630e3e64..832abd3c4706 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -1596,7 +1596,7 @@ static void mcfrs_irqinit(struct mcf_serial *info) /* Clear mask, so no surprise interrupts. */ uartp[MCFUART_UIMR] = 0; - if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT, + if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED, "ColdFire UART", NULL)) { printk("MCFRS: Unable to attach ColdFire UART %d interrupt " "vector=%d\n", info->line, info->irq); diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 1b8e554f674f..48eb22d3a63e 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -190,7 +190,7 @@ mpc52xx_uart_startup(struct uart_port *port) /* Request IRQ */ ret = request_irq(port->irq, mpc52xx_uart_int, - SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port); + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port); if (ret) return ret; diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 8c498f785e21..63d2a66e563b 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1412,7 +1412,7 @@ mpsc_startup(struct uart_port *port) /* If irq's are shared, need to set flag */ if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) - flag = SA_SHIRQ; + flag = IRQF_SHARED; if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, "mpsc-sdma", pi)) diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 4d9435451f4a..459c0231aef3 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -934,7 +934,7 @@ static int pmz_startup(struct uart_port *port) } pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) { + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) { dev_err(&uap->dev->ofdev.dev, "Unable to register zs interrupt handler.\n"); pmz_set_scc_power(uap, 0); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 28c1881a6691..b361669f85a1 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -495,7 +495,7 @@ static int serial_txx9_startup(struct uart_port *port) sio_out(up, TXX9_SIDISR, 0); retval = request_irq(up->port.irq, serial_txx9_interrupt, - SA_SHIRQ, "serial_txx9", up); + IRQF_SHARED, "serial_txx9", up); if (retval) return retval; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 2509c3237e87..301573373c30 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -841,7 +841,7 @@ static int sci_request_irq(struct sci_port *port) printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); return -ENODEV; } - if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT, + if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED, "sci", port)) { printk(KERN_ERR "sci: Cannot allocate irq.\n"); return -ENODEV; @@ -850,7 +850,7 @@ static int sci_request_irq(struct sci_port *port) for (i = 0; i < ARRAY_SIZE(handlers); i++) { if (!port->irqs[i]) continue; - if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT, + if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED, desc[i], port)) { printk(KERN_ERR "sci: Cannot allocate irq.\n"); return -ENODEV; diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 4b0afc8f12b9..2f148e5b9255 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -648,7 +648,7 @@ static irqreturn_t sn_sal_interrupt(int irq, void *dev_id, struct pt_regs *regs) static int sn_sal_connect_interrupt(struct sn_cons_port *port) { if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, - SA_INTERRUPT | SA_SHIRQ, + IRQF_DISABLED | IRQF_SHARED, "SAL console driver", port) >= 0) { return SGI_UART_VECTOR; } diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 20a48697727c..0dbd4df44c05 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1027,7 +1027,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up, int err; err = request_irq(up->port.irq, sunsab_interrupt, - SA_SHIRQ, "sab", up); + IRQF_SHARED, "sab", up); if (err) { of_iounmap(up->port.membase, sizeof(union sab82532_async_regs)); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index eabf477fee95..f9013baba05b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -667,10 +667,10 @@ static int sunsu_startup(struct uart_port *port) if (up->su_type != SU_PORT_PORT) { retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, - SA_SHIRQ, su_typev[up->su_type], up); + IRQF_SHARED, su_typev[up->su_type], up); } else { retval = request_irq(up->port.irq, sunsu_serial_interrupt, - SA_SHIRQ, su_typev[up->su_type], up); + IRQF_SHARED, su_typev[up->su_type], up); } if (retval) { printk("su: Cannot register IRQ %d\n", up->port.irq); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 9ee7f3af9ae2..a1456d9352cb 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1354,7 +1354,7 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id * if (zilog_irq == -1) { zilog_irq = op->irqs[0]; - err = request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ, + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, "zs", sunzilog_irq_chain); if (err) { of_iounmap(rp, sizeof(struct zilog_layout)); diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c index a0da2aaf71c4..f802867c95c5 100644 --- a/drivers/serial/v850e_uart.c +++ b/drivers/serial/v850e_uart.c @@ -372,13 +372,13 @@ static int v850e_uart_startup (struct uart_port *port) /* Alloc RX irq. */ err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq, - SA_INTERRUPT, "v850e_uart", port); + IRQF_DISABLED, "v850e_uart", port); if (err) return err; /* Alloc TX irq. */ err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq, - SA_INTERRUPT, "v850e_uart", port); + IRQF_DISABLED, "v850e_uart", port); if (err) { free_irq (V850E_UART_RX_IRQ (port->line), port); return err;