From: Claudio Imbrenda Date: Thu, 4 Aug 2016 15:58:47 +0000 (+0200) Subject: KVM: s390: ioctls to get and set guest storage attributes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4036e3874a1ce41a4f7267289f9a0d8e5cd49408;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git KVM: s390: ioctls to get and set guest storage attributes * Add the struct used in the ioctls to get and set CMMA attributes. * Add the two functions needed to get and set the CMMA attributes for guest pages. * Add the two ioctls that use the aforementioned functions. Signed-off-by: Claudio Imbrenda Acked-by: Cornelia Huck Signed-off-by: Christian Borntraeger --- diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 4029943887a3..912b7df8215a 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3255,6 +3255,141 @@ Otherwise, if the MCE is a corrected error, KVM will just store it in the corresponding bank (provided this bank is not holding a previously reported uncorrected error). +4.107 KVM_S390_GET_CMMA_BITS + +Capability: KVM_CAP_S390_CMMA_MIGRATION +Architectures: s390 +Type: vm ioctl +Parameters: struct kvm_s390_cmma_log (in, out) +Returns: 0 on success, a negative value on error + +This ioctl is used to get the values of the CMMA bits on the s390 +architecture. It is meant to be used in two scenarios: +- During live migration to save the CMMA values. Live migration needs + to be enabled via the KVM_REQ_START_MIGRATION VM property. +- To non-destructively peek at the CMMA values, with the flag + KVM_S390_CMMA_PEEK set. + +The ioctl takes parameters via the kvm_s390_cmma_log struct. The desired +values are written to a buffer whose location is indicated via the "values" +member in the kvm_s390_cmma_log struct. The values in the input struct are +also updated as needed. +Each CMMA value takes up one byte. + +struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; +}; + +start_gfn is the number of the first guest frame whose CMMA values are +to be retrieved, + +count is the length of the buffer in bytes, + +values points to the buffer where the result will be written to. + +If count is greater than KVM_S390_SKEYS_MAX, then it is considered to be +KVM_S390_SKEYS_MAX. KVM_S390_SKEYS_MAX is re-used for consistency with +other ioctls. + +The result is written in the buffer pointed to by the field values, and +the values of the input parameter are updated as follows. + +Depending on the flags, different actions are performed. The only +supported flag so far is KVM_S390_CMMA_PEEK. + +The default behaviour if KVM_S390_CMMA_PEEK is not set is: +start_gfn will indicate the first page frame whose CMMA bits were dirty. +It is not necessarily the same as the one passed as input, as clean pages +are skipped. + +count will indicate the number of bytes actually written in the buffer. +It can (and very often will) be smaller than the input value, since the +buffer is only filled until 16 bytes of clean values are found (which +are then not copied in the buffer). Since a CMMA migration block needs +the base address and the length, for a total of 16 bytes, we will send +back some clean data if there is some dirty data afterwards, as long as +the size of the clean data does not exceed the size of the header. This +allows to minimize the amount of data to be saved or transferred over +the network at the expense of more roundtrips to userspace. The next +invocation of the ioctl will skip over all the clean values, saving +potentially more than just the 16 bytes we found. + +If KVM_S390_CMMA_PEEK is set: +the existing storage attributes are read even when not in migration +mode, and no other action is performed; + +the output start_gfn will be equal to the input start_gfn, + +the output count will be equal to the input count, except if the end of +memory has been reached. + +In both cases: +the field "remaining" will indicate the total number of dirty CMMA values +still remaining, or 0 if KVM_S390_CMMA_PEEK is set and migration mode is +not enabled. + +mask is unused. + +values points to the userspace buffer where the result will be stored. + +This ioctl can fail with -ENOMEM if not enough memory can be allocated to +complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if +KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with +-EFAULT if the userspace address is invalid or if no page table is +present for the addresses (e.g. when using hugepages). + +4.108 KVM_S390_SET_CMMA_BITS + +Capability: KVM_CAP_S390_CMMA_MIGRATION +Architectures: s390 +Type: vm ioctl +Parameters: struct kvm_s390_cmma_log (in) +Returns: 0 on success, a negative value on error + +This ioctl is used to set the values of the CMMA bits on the s390 +architecture. It is meant to be used during live migration to restore +the CMMA values, but there are no restrictions on its use. +The ioctl takes parameters via the kvm_s390_cmma_values struct. +Each CMMA value takes up one byte. + +struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; +}; + +start_gfn indicates the starting guest frame number, + +count indicates how many values are to be considered in the buffer, + +flags is not used and must be 0. + +mask indicates which PGSTE bits are to be considered. + +remaining is not used. + +values points to the buffer in userspace where to store the values. + +This ioctl can fail with -ENOMEM if not enough memory can be allocated to +complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if +the count field is too large (e.g. more than KVM_S390_CMMA_SIZE_MAX) or +if the flags field was not 0, with -EFAULT if the userspace address is +invalid, if invalid pages are written to (e.g. after the end of memory) +or if no page table is present for the addresses (e.g. when using +hugepages). + 5. The kvm_run structure ------------------------ diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index c2b391499374..e100a7ff35c7 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -30,8 +30,8 @@ #include #include #include - #include + #include #include #include @@ -387,6 +387,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_S390_SKEYS: case KVM_CAP_S390_IRQ_STATE: case KVM_CAP_S390_USER_INSTR0: + case KVM_CAP_S390_CMMA_MIGRATION: case KVM_CAP_S390_AIS: r = 1; break; @@ -1419,6 +1420,182 @@ out: return r; } +/* + * Base address and length must be sent at the start of each block, therefore + * it's cheaper to send some clean data, as long as it's less than the size of + * two longs. + */ +#define KVM_S390_MAX_BIT_DISTANCE (2 * sizeof(void *)) +/* for consistency */ +#define KVM_S390_CMMA_SIZE_MAX ((u32)KVM_S390_SKEYS_MAX) + +/* + * This function searches for the next page with dirty CMMA attributes, and + * saves the attributes in the buffer up to either the end of the buffer or + * until a block of at least KVM_S390_MAX_BIT_DISTANCE clean bits is found; + * no trailing clean bytes are saved. + * In case no dirty bits were found, or if CMMA was not enabled or used, the + * output buffer will indicate 0 as length. + */ +static int kvm_s390_get_cmma_bits(struct kvm *kvm, + struct kvm_s390_cmma_log *args) +{ + struct kvm_s390_migration_state *s = kvm->arch.migration_state; + unsigned long bufsize, hva, pgstev, i, next, cur; + int srcu_idx, peek, r = 0, rr; + u8 *res; + + cur = args->start_gfn; + i = next = pgstev = 0; + + if (unlikely(!kvm->arch.use_cmma)) + return -ENXIO; + /* Invalid/unsupported flags were specified */ + if (args->flags & ~KVM_S390_CMMA_PEEK) + return -EINVAL; + /* Migration mode query, and we are not doing a migration */ + peek = !!(args->flags & KVM_S390_CMMA_PEEK); + if (!peek && !s) + return -EINVAL; + /* CMMA is disabled or was not used, or the buffer has length zero */ + bufsize = min(args->count, KVM_S390_CMMA_SIZE_MAX); + if (!bufsize || !kvm->mm->context.use_cmma) { + memset(args, 0, sizeof(*args)); + return 0; + } + + if (!peek) { + /* We are not peeking, and there are no dirty pages */ + if (!atomic64_read(&s->dirty_pages)) { + memset(args, 0, sizeof(*args)); + return 0; + } + cur = find_next_bit(s->pgste_bitmap, s->bitmap_size, + args->start_gfn); + if (cur >= s->bitmap_size) /* nothing found, loop back */ + cur = find_next_bit(s->pgste_bitmap, s->bitmap_size, 0); + if (cur >= s->bitmap_size) { /* again! (very unlikely) */ + memset(args, 0, sizeof(*args)); + return 0; + } + next = find_next_bit(s->pgste_bitmap, s->bitmap_size, cur + 1); + } + + res = vmalloc(bufsize); + if (!res) + return -ENOMEM; + + args->start_gfn = cur; + + down_read(&kvm->mm->mmap_sem); + srcu_idx = srcu_read_lock(&kvm->srcu); + while (i < bufsize) { + hva = gfn_to_hva(kvm, cur); + if (kvm_is_error_hva(hva)) { + r = -EFAULT; + break; + } + /* decrement only if we actually flipped the bit to 0 */ + if (!peek && test_and_clear_bit(cur, s->pgste_bitmap)) + atomic64_dec(&s->dirty_pages); + r = get_pgste(kvm->mm, hva, &pgstev); + if (r < 0) + pgstev = 0; + /* save the value */ + res[i++] = (pgstev >> 24) & 0x3; + /* + * if the next bit is too far away, stop. + * if we reached the previous "next", find the next one + */ + if (!peek) { + if (next > cur + KVM_S390_MAX_BIT_DISTANCE) + break; + if (cur == next) + next = find_next_bit(s->pgste_bitmap, + s->bitmap_size, cur + 1); + /* reached the end of the bitmap or of the buffer, stop */ + if ((next >= s->bitmap_size) || + (next >= args->start_gfn + bufsize)) + break; + } + cur++; + } + srcu_read_unlock(&kvm->srcu, srcu_idx); + up_read(&kvm->mm->mmap_sem); + args->count = i; + args->remaining = s ? atomic64_read(&s->dirty_pages) : 0; + + rr = copy_to_user((void __user *)args->values, res, args->count); + if (rr) + r = -EFAULT; + + vfree(res); + return r; +} + +/* + * This function sets the CMMA attributes for the given pages. If the input + * buffer has zero length, no action is taken, otherwise the attributes are + * set and the mm->context.use_cmma flag is set. + */ +static int kvm_s390_set_cmma_bits(struct kvm *kvm, + const struct kvm_s390_cmma_log *args) +{ + unsigned long hva, mask, pgstev, i; + uint8_t *bits; + int srcu_idx, r = 0; + + mask = args->mask; + + if (!kvm->arch.use_cmma) + return -ENXIO; + /* invalid/unsupported flags */ + if (args->flags != 0) + return -EINVAL; + /* Enforce sane limit on memory allocation */ + if (args->count > KVM_S390_CMMA_SIZE_MAX) + return -EINVAL; + /* Nothing to do */ + if (args->count == 0) + return 0; + + bits = vmalloc(sizeof(*bits) * args->count); + if (!bits) + return -ENOMEM; + + r = copy_from_user(bits, (void __user *)args->values, args->count); + if (r) { + r = -EFAULT; + goto out; + } + + down_read(&kvm->mm->mmap_sem); + srcu_idx = srcu_read_lock(&kvm->srcu); + for (i = 0; i < args->count; i++) { + hva = gfn_to_hva(kvm, args->start_gfn + i); + if (kvm_is_error_hva(hva)) { + r = -EFAULT; + break; + } + + pgstev = bits[i]; + pgstev = pgstev << 24; + mask &= _PGSTE_GPS_USAGE_MASK; + set_pgste_bits(kvm->mm, hva, mask, pgstev); + } + srcu_read_unlock(&kvm->srcu, srcu_idx); + up_read(&kvm->mm->mmap_sem); + + if (!kvm->mm->context.use_cmma) { + down_write(&kvm->mm->mmap_sem); + kvm->mm->context.use_cmma = 1; + up_write(&kvm->mm->mmap_sem); + } +out: + vfree(bits); + return r; +} + long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { @@ -1497,6 +1674,29 @@ long kvm_arch_vm_ioctl(struct file *filp, r = kvm_s390_set_skeys(kvm, &args); break; } + case KVM_S390_GET_CMMA_BITS: { + struct kvm_s390_cmma_log args; + + r = -EFAULT; + if (copy_from_user(&args, argp, sizeof(args))) + break; + r = kvm_s390_get_cmma_bits(kvm, &args); + if (!r) { + r = copy_to_user(argp, &args, sizeof(args)); + if (r) + r = -EFAULT; + } + break; + } + case KVM_S390_SET_CMMA_BITS: { + struct kvm_s390_cmma_log args; + + r = -EFAULT; + if (copy_from_user(&args, argp, sizeof(args))) + break; + r = kvm_s390_set_cmma_bits(kvm, &args); + break; + } default: r = -ENOTTY; } diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 577429a95ad8..2b8dc1ca18d4 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -155,6 +155,35 @@ struct kvm_s390_skeys { __u32 reserved[9]; }; +#define KVM_S390_CMMA_PEEK (1 << 0) + +/** + * kvm_s390_cmma_log - Used for CMMA migration. + * + * Used both for input and output. + * + * @start_gfn: Guest page number to start from. + * @count: Size of the result buffer. + * @flags: Control operation mode via KVM_S390_CMMA_* flags + * @remaining: Used with KVM_S390_GET_CMMA_BITS. Indicates how many dirty + * pages are still remaining. + * @mask: Used with KVM_S390_SET_CMMA_BITS. Bitmap of bits to actually set + * in the PGSTE. + * @values: Pointer to the values buffer. + * + * Used in KVM_S390_{G,S}ET_CMMA_BITS ioctls. + */ +struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; +}; + struct kvm_hyperv_exit { #define KVM_EXIT_HYPERV_SYNIC 1 #define KVM_EXIT_HYPERV_HCALL 2 @@ -895,6 +924,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_SPAPR_TCE_VFIO 142 #define KVM_CAP_X86_GUEST_MWAIT 143 #define KVM_CAP_ARM_USER_IRQ 144 +#define KVM_CAP_S390_CMMA_MIGRATION 145 #ifdef KVM_CAP_IRQ_ROUTING @@ -1318,6 +1348,9 @@ struct kvm_s390_ucas_mapping { #define KVM_S390_GET_IRQ_STATE _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state) /* Available with KVM_CAP_X86_SMM */ #define KVM_SMI _IO(KVMIO, 0xb7) +/* Available with KVM_CAP_S390_CMMA_MIGRATION */ +#define KVM_S390_GET_CMMA_BITS _IOW(KVMIO, 0xb8, struct kvm_s390_cmma_log) +#define KVM_S390_SET_CMMA_BITS _IOW(KVMIO, 0xb9, struct kvm_s390_cmma_log) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)