From: Luis R. Rodriguez Date: Thu, 15 Apr 2010 21:39:08 +0000 (-0400) Subject: ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=400b738678bf6f0b65a76a4ec2925473ba3e06ff;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access This is so we can share routines which access this register on calib.c Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.h b/drivers/net/wireless/ath/ath9k/ar9002_phy.h index 4fe204ed3a7c..afe48086250d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h @@ -120,13 +120,6 @@ #define AR_PHY_AGC_CTL1_COARSE_HIGH 0x003F8000 #define AR_PHY_AGC_CTL1_COARSE_HIGH_S 15 -#define AR_PHY_AGC_CONTROL 0x9860 -#define AR_PHY_AGC_CONTROL_CAL 0x00000001 -#define AR_PHY_AGC_CONTROL_NF 0x00000002 -#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 -#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000 -#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 - #define AR_PHY_CCA 0x9864 #define AR_PHY_MINCCA_PWR 0x0FF80000 #define AR_PHY_MINCCA_PWR_S 19 diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 70e647b13e0a..4e1177dc24ac 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -359,7 +359,6 @@ #define AR_PHY_SWITCH_COM_2 (AR_SM_BASE + 0x8c) #define AR_PHY_RX_CHAINMASK (AR_SM_BASE + 0xa0) #define AR_PHY_CAL_CHAINMASK (AR_SM_BASE + 0xc0) -#define AR_PHY_AGC_CONTROL (AR_SM_BASE + 0xc4) #define AR_PHY_CALMODE (AR_SM_BASE + 0xc8) #define AR_PHY_FCAL_1 (AR_SM_BASE + 0xcc) #define AR_PHY_FCAL_2_0 (AR_SM_BASE + 0xd0) @@ -509,18 +508,6 @@ #define AR_PHY_GC_ENABLE_DAC_FIFO 0x00000800 /* fifo between bb and dac */ #define AR_PHY_RX_DELAY_DELAY 0x00003FFF /* delay from wakeup to rx ena */ -#define AR_PHY_AGC_CONTROL_CAL 0x00000001 /* do internal calibration */ -#define AR_PHY_AGC_CONTROL_NF 0x00000002 /* do noise-floor calibration */ -#define AR_PHY_AGC_CONTROL_OFFSET_CAL 0x00000800 /* allow offset calibration */ -#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 /* enable noise floor calibration to happen */ -#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000 /* allow tx filter calibration */ -#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* don't update noise floor automatically */ -#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS 0x00040000 /* extend noise floor power measurement */ -#define AR_PHY_AGC_CONTROL_CLC_SUCCESS 0x00080000 /* carrier leak calibration done */ - -#define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0 -#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6 - #define AR_PHY_CALMODE_IQ 0x00000000 #define AR_PHY_CALMODE_ADC_GAIN 0x00000001 #define AR_PHY_CALMODE_ADC_DC_PER 0x00000002 diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 7758d99a84d4..aacc29a5ad71 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1776,4 +1776,19 @@ enum { * pcu_txsm. */ +#define AR9300_SM_BASE 0xa200 +#define AR9002_PHY_AGC_CONTROL 0x9860 +#define AR9003_PHY_AGC_CONTROL AR9300_SM_BASE + 0xc4 +#define AR_PHY_AGC_CONTROL (AR_SREV_9300_20_OR_LATER(ah) ? AR9003_PHY_AGC_CONTROL : AR9002_PHY_AGC_CONTROL) +#define AR_PHY_AGC_CONTROL_CAL 0x00000001 /* do internal calibration */ +#define AR_PHY_AGC_CONTROL_NF 0x00000002 /* do noise-floor calibration */ +#define AR_PHY_AGC_CONTROL_OFFSET_CAL 0x00000800 /* allow offset calibration */ +#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 /* enable noise floor calibration to happen */ +#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000 /* allow tx filter calibration */ +#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* don't update noise floor automatically */ +#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS 0x00040000 /* extend noise floor power measurement */ +#define AR_PHY_AGC_CONTROL_CLC_SUCCESS 0x00080000 /* carrier leak calibration done */ +#define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0 +#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6 + #endif