From: Anton Vorontsov Date: Tue, 31 Mar 2009 22:24:38 +0000 (-0700) Subject: powerpc: add mmc-spi-slot bindings X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3f1c6ebf57b815ad709e89291e446935fee78f75;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git powerpc: add mmc-spi-slot bindings The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by: Anton Vorontsov Cc: David Brownell Cc: Benjamin Herrenschmidt Cc: Kumar Gala Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt b/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt new file mode 100644 index 000000000000..c39ac2891951 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt @@ -0,0 +1,23 @@ +MMC/SD/SDIO slot directly connected to a SPI bus + +Required properties: +- compatible : should be "mmc-spi-slot". +- reg : should specify SPI address (chip-select number). +- spi-max-frequency : maximum frequency for this device (Hz). +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. +- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO, + Write-Protect GPIO. + +Example: + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; diff --git a/drivers/of/base.c b/drivers/of/base.c index cd17092b82bd..41c5dfd85358 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -446,6 +446,7 @@ struct of_modalias_table { }; static struct of_modalias_table of_modalias_table[] = { { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" }, + { "mmc-spi-slot", "mmc_spi" }, }; /**