From: Mauro Carvalho Chehab Date: Wed, 5 Apr 2017 13:23:05 +0000 (-0300) Subject: usb/power-management.txt: convert to ReST and add to driver-api book X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3db5f406e4440c486cec4772210b9802bf4546b3;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git usb/power-management.txt: convert to ReST and add to driver-api book This document describe some USB core functions. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab Acked-by: Greg Kroah-Hartman Signed-off-by: Jonathan Corbet --- diff --git a/Documentation/driver-api/usb/index.rst b/Documentation/driver-api/usb/index.rst index 441c5dacdf27..23c76c17fc19 100644 --- a/Documentation/driver-api/usb/index.rst +++ b/Documentation/driver-api/usb/index.rst @@ -9,6 +9,7 @@ Linux USB API anchors bulk-streams callbacks + power-management writing_usb_driver writing_musb_glue_layer diff --git a/Documentation/driver-api/usb/power-management.rst b/Documentation/driver-api/usb/power-management.rst new file mode 100644 index 000000000000..c068257f6d27 --- /dev/null +++ b/Documentation/driver-api/usb/power-management.rst @@ -0,0 +1,794 @@ +.. _usb-power-management: + +Power Management for USB +~~~~~~~~~~~~~~~~~~~~~~~~ + +:Author: Alan Stern +:Date: Last-updated: February 2014 + +.. + Contents: + --------- + * What is Power Management? + * What is Remote Wakeup? + * When is a USB device idle? + * Forms of dynamic PM + * The user interface for dynamic PM + * Changing the default idle-delay time + * Warnings + * The driver interface for Power Management + * The driver interface for autosuspend and autoresume + * Other parts of the driver interface + * Mutual exclusion + * Interaction between dynamic PM and system PM + * xHCI hardware link PM + * USB Port Power Control + * User Interface for Port Power Control + * Suggested Userspace Port Power Policy + + +What is Power Management? +------------------------- + +Power Management (PM) is the practice of saving energy by suspending +parts of a computer system when they aren't being used. While a +component is ``suspended`` it is in a nonfunctional low-power state; it +might even be turned off completely. A suspended component can be +``resumed`` (returned to a functional full-power state) when the kernel +needs to use it. (There also are forms of PM in which components are +placed in a less functional but still usable state instead of being +suspended; an example would be reducing the CPU's clock rate. This +document will not discuss those other forms.) + +When the parts being suspended include the CPU and most of the rest of +the system, we speak of it as a "system suspend". When a particular +device is turned off while the system as a whole remains running, we +call it a "dynamic suspend" (also known as a "runtime suspend" or +"selective suspend"). This document concentrates mostly on how +dynamic PM is implemented in the USB subsystem, although system PM is +covered to some extent (see ``Documentation/power/*.txt`` for more +information about system PM). + +System PM support is present only if the kernel was built with +``CONFIG_SUSPEND`` or ``CONFIG_HIBERNATION`` enabled. Dynamic PM support + +for USB is present whenever +the kernel was built with ``CONFIG_PM`` enabled. + +[Historically, dynamic PM support for USB was present only if the +kernel had been built with ``CONFIG_USB_SUSPEND`` enabled (which depended on +``CONFIG_PM_RUNTIME``). Starting with the 3.10 kernel release, dynamic PM +support for USB was present whenever the kernel was built with +``CONFIG_PM_RUNTIME`` enabled. The ``CONFIG_USB_SUSPEND`` option had been +eliminated.] + + +What is Remote Wakeup? +---------------------- + +When a device has been suspended, it generally doesn't resume until +the computer tells it to. Likewise, if the entire computer has been +suspended, it generally doesn't resume until the user tells it to, say +by pressing a power button or opening the cover. + +However some devices have the capability of resuming by themselves, or +asking the kernel to resume them, or even telling the entire computer +to resume. This capability goes by several names such as "Wake On +LAN"; we will refer to it generically as "remote wakeup". When a +device is enabled for remote wakeup and it is suspended, it may resume +itself (or send a request to be resumed) in response to some external +event. Examples include a suspended keyboard resuming when a key is +pressed, or a suspended USB hub resuming when a device is plugged in. + + +When is a USB device idle? +-------------------------- + +A device is idle whenever the kernel thinks it's not busy doing +anything important and thus is a candidate for being suspended. The +exact definition depends on the device's driver; drivers are allowed +to declare that a device isn't idle even when there's no actual +communication taking place. (For example, a hub isn't considered idle +unless all the devices plugged into that hub are already suspended.) +In addition, a device isn't considered idle so long as a program keeps +its usbfs file open, whether or not any I/O is going on. + +If a USB device has no driver, its usbfs file isn't open, and it isn't +being accessed through sysfs, then it definitely is idle. + + +Forms of dynamic PM +------------------- + +Dynamic suspends occur when the kernel decides to suspend an idle +device. This is called ``autosuspend`` for short. In general, a device +won't be autosuspended unless it has been idle for some minimum period +of time, the so-called idle-delay time. + +Of course, nothing the kernel does on its own initiative should +prevent the computer or its devices from working properly. If a +device has been autosuspended and a program tries to use it, the +kernel will automatically resume the device (autoresume). For the +same reason, an autosuspended device will usually have remote wakeup +enabled, if the device supports remote wakeup. + +It is worth mentioning that many USB drivers don't support +autosuspend. In fact, at the time of this writing (Linux 2.6.23) the +only drivers which do support it are the hub driver, kaweth, asix, +usblp, usblcd, and usb-skeleton (which doesn't count). If a +non-supporting driver is bound to a device, the device won't be +autosuspended. In effect, the kernel pretends the device is never +idle. + +We can categorize power management events in two broad classes: +external and internal. External events are those triggered by some +agent outside the USB stack: system suspend/resume (triggered by +userspace), manual dynamic resume (also triggered by userspace), and +remote wakeup (triggered by the device). Internal events are those +triggered within the USB stack: autosuspend and autoresume. Note that +all dynamic suspend events are internal; external agents are not +allowed to issue dynamic suspends. + + +The user interface for dynamic PM +--------------------------------- + +The user interface for controlling dynamic PM is located in the ``power/`` +subdirectory of each USB device's sysfs directory, that is, in +``/sys/bus/usb/devices/.../power/`` where "..." is the device's ID. The +relevant attribute files are: wakeup, control, and +``autosuspend_delay_ms``. (There may also be a file named ``level``; this +file was deprecated as of the 2.6.35 kernel and replaced by the +``control`` file. In 2.6.38 the ``autosuspend`` file will be deprecated +and replaced by the ``autosuspend_delay_ms`` file. The only difference +is that the newer file expresses the delay in milliseconds whereas the +older file uses seconds. Confusingly, both files are present in 2.6.37 +but only ``autosuspend`` works.) + + ``power/wakeup`` + + This file is empty if the device does not support + remote wakeup. Otherwise the file contains either the + word ``enabled`` or the word ``disabled``, and you can + write those words to the file. The setting determines + whether or not remote wakeup will be enabled when the + device is next suspended. (If the setting is changed + while the device is suspended, the change won't take + effect until the following suspend.) + + ``power/control`` + + This file contains one of two words: ``on`` or ``auto``. + You can write those words to the file to change the + device's setting. + + - ``on`` means that the device should be resumed and + autosuspend is not allowed. (Of course, system + suspends are still allowed.) + + - ``auto`` is the normal state in which the kernel is + allowed to autosuspend and autoresume the device. + + (In kernels up to 2.6.32, you could also specify + ``suspend``, meaning that the device should remain + suspended and autoresume was not allowed. This + setting is no longer supported.) + + ``power/autosuspend_delay_ms`` + + This file contains an integer value, which is the + number of milliseconds the device should remain idle + before the kernel will autosuspend it (the idle-delay + time). The default is 2000. 0 means to autosuspend + as soon as the device becomes idle, and negative + values mean never to autosuspend. You can write a + number to the file to change the autosuspend + idle-delay time. + +Writing ``-1`` to ``power/autosuspend_delay_ms`` and writing ``on`` to +``power/control`` do essentially the same thing -- they both prevent the +device from being autosuspended. Yes, this is a redundancy in the +API. + +(In 2.6.21 writing ``0`` to ``power/autosuspend`` would prevent the device +from being autosuspended; the behavior was changed in 2.6.22. The +``power/autosuspend`` attribute did not exist prior to 2.6.21, and the +``power/level`` attribute did not exist prior to 2.6.22. ``power/control`` +was added in 2.6.34, and ``power/autosuspend_delay_ms`` was added in +2.6.37 but did not become functional until 2.6.38.) + + +Changing the default idle-delay time +------------------------------------ + +The default autosuspend idle-delay time (in seconds) is controlled by +a module parameter in usbcore. You can specify the value when usbcore +is loaded. For example, to set it to 5 seconds instead of 2 you would +do:: + + modprobe usbcore autosuspend=5 + +Equivalently, you could add to a configuration file in /etc/modprobe.d +a line saying:: + + options usbcore autosuspend=5 + +Some distributions load the usbcore module very early during the boot +process, by means of a program or script running from an initramfs +image. To alter the parameter value you would have to rebuild that +image. + +If usbcore is compiled into the kernel rather than built as a loadable +module, you can add:: + + usbcore.autosuspend=5 + +to the kernel's boot command line. + +Finally, the parameter value can be changed while the system is +running. If you do:: + + echo 5 >/sys/module/usbcore/parameters/autosuspend + +then each new USB device will have its autosuspend idle-delay +initialized to 5. (The idle-delay values for already existing devices +will not be affected.) + +Setting the initial default idle-delay to -1 will prevent any +autosuspend of any USB device. This has the benefit of allowing you +then to enable autosuspend for selected devices. + + +Warnings +-------- + +The USB specification states that all USB devices must support power +management. Nevertheless, the sad fact is that many devices do not +support it very well. You can suspend them all right, but when you +try to resume them they disconnect themselves from the USB bus or +they stop working entirely. This seems to be especially prevalent +among printers and scanners, but plenty of other types of device have +the same deficiency. + +For this reason, by default the kernel disables autosuspend (the +``power/control`` attribute is initialized to ``on``) for all devices other +than hubs. Hubs, at least, appear to be reasonably well-behaved in +this regard. + +(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled +by default for almost all USB devices. A number of people experienced +problems as a result.) + +This means that non-hub devices won't be autosuspended unless the user +or a program explicitly enables it. As of this writing there aren't +any widespread programs which will do this; we hope that in the near +future device managers such as HAL will take on this added +responsibility. In the meantime you can always carry out the +necessary operations by hand or add them to a udev script. You can +also change the idle-delay time; 2 seconds is not the best choice for +every device. + +If a driver knows that its device has proper suspend/resume support, +it can enable autosuspend all by itself. For example, the video +driver for a laptop's webcam might do this (in recent kernels they +do), since these devices are rarely used and so should normally be +autosuspended. + +Sometimes it turns out that even when a device does work okay with +autosuspend there are still problems. For example, the usbhid driver, +which manages keyboards and mice, has autosuspend support. Tests with +a number of keyboards show that typing on a suspended keyboard, while +causing the keyboard to do a remote wakeup all right, will nonetheless +frequently result in lost keystrokes. Tests with mice show that some +of them will issue a remote-wakeup request in response to button +presses but not to motion, and some in response to neither. + +The kernel will not prevent you from enabling autosuspend on devices +that can't handle it. It is even possible in theory to damage a +device by suspending it at the wrong time. (Highly unlikely, but +possible.) Take care. + + +The driver interface for Power Management +----------------------------------------- + +The requirements for a USB driver to support external power management +are pretty modest; the driver need only define:: + + .suspend + .resume + .reset_resume + +methods in its :c:type:`usb_driver` structure, and the ``reset_resume`` method +is optional. The methods' jobs are quite simple: + + - The ``suspend`` method is called to warn the driver that the + device is going to be suspended. If the driver returns a + negative error code, the suspend will be aborted. Normally + the driver will return 0, in which case it must cancel all + outstanding URBs (:c:func:`usb_kill_urb`) and not submit any more. + + - The ``resume`` method is called to tell the driver that the + device has been resumed and the driver can return to normal + operation. URBs may once more be submitted. + + - The ``reset_resume`` method is called to tell the driver that + the device has been resumed and it also has been reset. + The driver should redo any necessary device initialization, + since the device has probably lost most or all of its state + (although the interfaces will be in the same altsettings as + before the suspend). + +If the device is disconnected or powered down while it is suspended, +the ``disconnect`` method will be called instead of the ``resume`` or +``reset_resume`` method. This is also quite likely to happen when +waking up from hibernation, as many systems do not maintain suspend +current to the USB host controllers during hibernation. (It's +possible to work around the hibernation-forces-disconnect problem by +using the USB Persist facility.) + +The ``reset_resume`` method is used by the USB Persist facility (see +``Documentation/usb/persist.txt``) and it can also be used under certain +circumstances when ``CONFIG_USB_PERSIST`` is not enabled. Currently, if a +device is reset during a resume and the driver does not have a +``reset_resume`` method, the driver won't receive any notification about +the resume. Later kernels will call the driver's ``disconnect`` method; +2.6.23 doesn't do this. + +USB drivers are bound to interfaces, so their ``suspend`` and ``resume`` +methods get called when the interfaces are suspended or resumed. In +principle one might want to suspend some interfaces on a device (i.e., +force the drivers for those interface to stop all activity) without +suspending the other interfaces. The USB core doesn't allow this; all +interfaces are suspended when the device itself is suspended and all +interfaces are resumed when the device is resumed. It isn't possible +to suspend or resume some but not all of a device's interfaces. The +closest you can come is to unbind the interfaces' drivers. + + +The driver interface for autosuspend and autoresume +--------------------------------------------------- + +To support autosuspend and autoresume, a driver should implement all +three of the methods listed above. In addition, a driver indicates +that it supports autosuspend by setting the ``.supports_autosuspend`` flag +in its usb_driver structure. It is then responsible for informing the +USB core whenever one of its interfaces becomes busy or idle. The +driver does so by calling these six functions:: + + int usb_autopm_get_interface(struct usb_interface *intf); + void usb_autopm_put_interface(struct usb_interface *intf); + int usb_autopm_get_interface_async(struct usb_interface *intf); + void usb_autopm_put_interface_async(struct usb_interface *intf); + void usb_autopm_get_interface_no_resume(struct usb_interface *intf); + void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); + +The functions work by maintaining a usage counter in the +usb_interface's embedded device structure. When the counter is > 0 +then the interface is deemed to be busy, and the kernel will not +autosuspend the interface's device. When the usage counter is = 0 +then the interface is considered to be idle, and the kernel may +autosuspend the device. + +Drivers need not be concerned about balancing changes to the usage +counter; the USB core will undo any remaining "get"s when a driver +is unbound from its interface. As a corollary, drivers must not call +any of the ``usb_autopm_*`` functions after their ``disconnect`` +routine has returned. + +Drivers using the async routines are responsible for their own +synchronization and mutual exclusion. + + :c:func:`usb_autopm_get_interface` increments the usage counter and + does an autoresume if the device is suspended. If the + autoresume fails, the counter is decremented back. + + :c:func:`usb_autopm_put_interface` decrements the usage counter and + attempts an autosuspend if the new value is = 0. + + :c:func:`usb_autopm_get_interface_async` and + :c:func:`usb_autopm_put_interface_async` do almost the same things as + their non-async counterparts. The big difference is that they + use a workqueue to do the resume or suspend part of their + jobs. As a result they can be called in an atomic context, + such as an URB's completion handler, but when they return the + device will generally not yet be in the desired state. + + :c:func:`usb_autopm_get_interface_no_resume` and + :c:func:`usb_autopm_put_interface_no_suspend` merely increment or + decrement the usage counter; they do not attempt to carry out + an autoresume or an autosuspend. Hence they can be called in + an atomic context. + +The simplest usage pattern is that a driver calls +:c:func:`usb_autopm_get_interface` in its open routine and +:c:func:`usb_autopm_put_interface` in its close or release routine. But other +patterns are possible. + +The autosuspend attempts mentioned above will often fail for one +reason or another. For example, the ``power/control`` attribute might be +set to ``on``, or another interface in the same device might not be +idle. This is perfectly normal. If the reason for failure was that +the device hasn't been idle for long enough, a timer is scheduled to +carry out the operation automatically when the autosuspend idle-delay +has expired. + +Autoresume attempts also can fail, although failure would mean that +the device is no longer present or operating properly. Unlike +autosuspend, there's no idle-delay for an autoresume. + + +Other parts of the driver interface +----------------------------------- + +Drivers can enable autosuspend for their devices by calling:: + + usb_enable_autosuspend(struct usb_device *udev); + +in their :c:func:`probe` routine, if they know that the device is capable of +suspending and resuming correctly. This is exactly equivalent to +writing ``auto`` to the device's ``power/control`` attribute. Likewise, +drivers can disable autosuspend by calling:: + + usb_disable_autosuspend(struct usb_device *udev); + +This is exactly the same as writing ``on`` to the ``power/control`` attribute. + +Sometimes a driver needs to make sure that remote wakeup is enabled +during autosuspend. For example, there's not much point +autosuspending a keyboard if the user can't cause the keyboard to do a +remote wakeup by typing on it. If the driver sets +``intf->needs_remote_wakeup`` to 1, the kernel won't autosuspend the +device if remote wakeup isn't available. (If the device is already +autosuspended, though, setting this flag won't cause the kernel to +autoresume it. Normally a driver would set this flag in its ``probe`` +method, at which time the device is guaranteed not to be +autosuspended.) + +If a driver does its I/O asynchronously in interrupt context, it +should call :c:func:`usb_autopm_get_interface_async` before starting output and +:c:func:`usb_autopm_put_interface_async` when the output queue drains. When +it receives an input event, it should call:: + + usb_mark_last_busy(struct usb_device *udev); + +in the event handler. This tells the PM core that the device was just +busy and therefore the next autosuspend idle-delay expiration should +be pushed back. Many of the usb_autopm_* routines also make this call, +so drivers need to worry only when interrupt-driven input arrives. + +Asynchronous operation is always subject to races. For example, a +driver may call the :c:func:`usb_autopm_get_interface_async` routine at a time +when the core has just finished deciding the device has been idle for +long enough but not yet gotten around to calling the driver's ``suspend`` +method. The ``suspend`` method must be responsible for synchronizing with +the I/O request routine and the URB completion handler; it should +cause autosuspends to fail with -EBUSY if the driver needs to use the +device. + +External suspend calls should never be allowed to fail in this way, +only autosuspend calls. The driver can tell them apart by applying +the :c:func:`PMSG_IS_AUTO` macro to the message argument to the ``suspend`` +method; it will return True for internal PM events (autosuspend) and +False for external PM events. + + +Mutual exclusion +---------------- + +For external events -- but not necessarily for autosuspend or +autoresume -- the device semaphore (udev->dev.sem) will be held when a +``suspend`` or ``resume`` method is called. This implies that external +suspend/resume events are mutually exclusive with calls to ``probe``, +``disconnect``, ``pre_reset``, and ``post_reset``; the USB core guarantees that +this is true of autosuspend/autoresume events as well. + +If a driver wants to block all suspend/resume calls during some +critical section, the best way is to lock the device and call +:c:func:`usb_autopm_get_interface` (and do the reverse at the end of the +critical section). Holding the device semaphore will block all +external PM calls, and the :c:func:`usb_autopm_get_interface` will prevent any +internal PM calls, even if it fails. (Exercise: Why?) + + +Interaction between dynamic PM and system PM +-------------------------------------------- + +Dynamic power management and system power management can interact in +a couple of ways. + +Firstly, a device may already be autosuspended when a system suspend +occurs. Since system suspends are supposed to be as transparent as +possible, the device should remain suspended following the system +resume. But this theory may not work out well in practice; over time +the kernel's behavior in this regard has changed. As of 2.6.37 the +policy is to resume all devices during a system resume and let them +handle their own runtime suspends afterward. + +Secondly, a dynamic power-management event may occur as a system +suspend is underway. The window for this is short, since system +suspends don't take long (a few seconds usually), but it can happen. +For example, a suspended device may send a remote-wakeup signal while +the system is suspending. The remote wakeup may succeed, which would +cause the system suspend to abort. If the remote wakeup doesn't +succeed, it may still remain active and thus cause the system to +resume as soon as the system suspend is complete. Or the remote +wakeup may fail and get lost. Which outcome occurs depends on timing +and on the hardware and firmware design. + + +xHCI hardware link PM +--------------------- + +xHCI host controller provides hardware link power management to usb2.0 +(xHCI 1.0 feature) and usb3.0 devices which support link PM. By +enabling hardware LPM, the host can automatically put the device into +lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices), +which state device can enter and resume very quickly. + +The user interface for controlling hardware LPM is located in the +``power/`` subdirectory of each USB device's sysfs directory, that is, in +``/sys/bus/usb/devices/.../power/`` where "..." is the device's ID. The +relevant attribute files are ``usb2_hardware_lpm`` and ``usb3_hardware_lpm``. + + ``power/usb2_hardware_lpm`` + + When a USB2 device which support LPM is plugged to a + xHCI host root hub which support software LPM, the + host will run a software LPM test for it; if the device + enters L1 state and resume successfully and the host + supports USB2 hardware LPM, this file will show up and + driver will enable hardware LPM for the device. You + can write y/Y/1 or n/N/0 to the file to enable/disable + USB2 hardware LPM manually. This is for test purpose mainly. + + ``power/usb3_hardware_lpm_u1`` + ``power/usb3_hardware_lpm_u2`` + + When a USB 3.0 lpm-capable device is plugged in to a + xHCI host which supports link PM, it will check if U1 + and U2 exit latencies have been set in the BOS + descriptor; if the check is passed and the host + supports USB3 hardware LPM, USB3 hardware LPM will be + enabled for the device and these files will be created. + The files hold a string value (enable or disable) + indicating whether or not USB3 hardware LPM U1 or U2 + is enabled for the device. + +USB Port Power Control +---------------------- + +In addition to suspending endpoint devices and enabling hardware +controlled link power management, the USB subsystem also has the +capability to disable power to ports under some conditions. Power is +controlled through ``Set/ClearPortFeature(PORT_POWER)`` requests to a hub. +In the case of a root or platform-internal hub the host controller +driver translates ``PORT_POWER`` requests into platform firmware (ACPI) +method calls to set the port power state. For more background see the +Linux Plumbers Conference 2012 slides [#f1]_ and video [#f2]_: + +Upon receiving a ``ClearPortFeature(PORT_POWER)`` request a USB port is +logically off, and may trigger the actual loss of VBUS to the port [#f3]_. +VBUS may be maintained in the case where a hub gangs multiple ports into +a shared power well causing power to remain until all ports in the gang +are turned off. VBUS may also be maintained by hub ports configured for +a charging application. In any event a logically off port will lose +connection with its device, not respond to hotplug events, and not +respond to remote wakeup events. + +.. warning:: + + turning off a port may result in the inability to hot add a device. + Please see "User Interface for Port Power Control" for details. + +As far as the effect on the device itself it is similar to what a device +goes through during system suspend, i.e. the power session is lost. Any +USB device or driver that misbehaves with system suspend will be +similarly affected by a port power cycle event. For this reason the +implementation shares the same device recovery path (and honors the same +quirks) as the system resume path for the hub. + +.. [#f1] + + http://dl.dropbox.com/u/96820575/sarah-sharp-lpt-port-power-off2-mini.pdf + +.. [#f2] + + http://linuxplumbers.ubicast.tv/videos/usb-port-power-off-kerneluserspace-api/ + +.. [#f3] + + USB 3.1 Section 10.12 + + wakeup note: if a device is configured to send wakeup events the port + power control implementation will block poweroff attempts on that + port. + + +User Interface for Port Power Control +------------------------------------- + +The port power control mechanism uses the PM runtime system. Poweroff is +requested by clearing the ``power/pm_qos_no_power_off`` flag of the port device +(defaults to 1). If the port is disconnected it will immediately receive a +``ClearPortFeature(PORT_POWER)`` request. Otherwise, it will honor the pm +runtime rules and require the attached child device and all descendants to be +suspended. This mechanism is dependent on the hub advertising port power +switching in its hub descriptor (wHubCharacteristics logical power switching +mode field). + +Note, some interface devices/drivers do not support autosuspend. Userspace may +need to unbind the interface drivers before the :c:type:`usb_device` will +suspend. An unbound interface device is suspended by default. When unbinding, +be careful to unbind interface drivers, not the driver of the parent usb +device. Also, leave hub interface drivers bound. If the driver for the usb +device (not interface) is unbound the kernel is no longer able to resume the +device. If a hub interface driver is unbound, control of its child ports is +lost and all attached child-devices will disconnect. A good rule of thumb is +that if the 'driver/module' link for a device points to +``/sys/module/usbcore`` then unbinding it will interfere with port power +control. + +Example of the relevant files for port power control. Note, in this example +these files are relative to a usb hub device (prefix):: + + prefix=/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1 + + attached child device + + hub port device + | + hub interface device + | | + v v v + $prefix/3-1:1.0/3-1-port1/device + + $prefix/3-1:1.0/3-1-port1/power/pm_qos_no_power_off + $prefix/3-1:1.0/3-1-port1/device/power/control + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + ... + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + +In addition to these files some ports may have a 'peer' link to a port on +another hub. The expectation is that all superspeed ports have a +hi-speed peer:: + + $prefix/3-1:1.0/3-1-port1/peer -> ../../../../usb2/2-1/2-1:1.0/2-1-port1 + ../../../../usb2/2-1/2-1:1.0/2-1-port1/peer -> ../../../../usb3/3-1/3-1:1.0/3-1-port1 + +Distinct from 'companion ports', or 'ehci/xhci shared switchover ports' +peer ports are simply the hi-speed and superspeed interface pins that +are combined into a single usb3 connector. Peer ports share the same +ancestor XHCI device. + +While a superspeed port is powered off a device may downgrade its +connection and attempt to connect to the hi-speed pins. The +implementation takes steps to prevent this: + +1. Port suspend is sequenced to guarantee that hi-speed ports are powered-off + before their superspeed peer is permitted to power-off. The implication is + that the setting ``pm_qos_no_power_off`` to zero on a superspeed port may + not cause the port to power-off until its highspeed peer has gone to its + runtime suspend state. Userspace must take care to order the suspensions + if it wants to guarantee that a superspeed port will power-off. + +2. Port resume is sequenced to force a superspeed port to power-on prior to its + highspeed peer. + +3. Port resume always triggers an attached child device to resume. After a + power session is lost the device may have been removed, or need reset. + Resuming the child device when the parent port regains power resolves those + states and clamps the maximum port power cycle frequency at the rate the + child device can suspend (autosuspend-delay) and resume (reset-resume + latency). + +Sysfs files relevant for port power control: + + ``/power/pm_qos_no_power_off``: + This writable flag controls the state of an idle port. + Once all children and descendants have suspended the + port may suspend/poweroff provided that + pm_qos_no_power_off is '0'. If pm_qos_no_power_off is + '1' the port will remain active/powered regardless of + the stats of descendants. Defaults to 1. + + ``/power/runtime_status``: + This file reflects whether the port is 'active' (power is on) + or 'suspended' (logically off). There is no indication to + userspace whether VBUS is still supplied. + + ``/connect_type``: + An advisory read-only flag to userspace indicating the + location and connection type of the port. It returns + one of four values 'hotplug', 'hardwired', 'not used', + and 'unknown'. All values, besides unknown, are set by + platform firmware. + + ``hotplug`` indicates an externally connectable/visible + port on the platform. Typically userspace would choose + to keep such a port powered to handle new device + connection events. + + ``hardwired`` refers to a port that is not visible but + connectable. Examples are internal ports for USB + bluetooth that can be disconnected via an external + switch or a port with a hardwired USB camera. It is + expected to be safe to allow these ports to suspend + provided pm_qos_no_power_off is coordinated with any + switch that gates connections. Userspace must arrange + for the device to be connected prior to the port + powering off, or to activate the port prior to enabling + connection via a switch. + + ``not used`` refers to an internal port that is expected + to never have a device connected to it. These may be + empty internal ports, or ports that are not physically + exposed on a platform. Considered safe to be + powered-off at all times. + + ``unknown`` means platform firmware does not provide + information for this port. Most commonly refers to + external hub ports which should be considered 'hotplug' + for policy decisions. + + .. note:: + + - since we are relying on the BIOS to get this ACPI + information correct, the USB port descriptions may + be missing or wrong. + + - Take care in clearing ``pm_qos_no_power_off``. Once + power is off this port will + not respond to new connect events. + + Once a child device is attached additional constraints are + applied before the port is allowed to poweroff. + + ``/power/control``: + Must be ``auto``, and the port will not + power down until ``/power/runtime_status`` + reflects the 'suspended' state. Default + value is controlled by child device driver. + + ``/power/persist``: + This defaults to ``1`` for most devices and indicates if + kernel can persist the device's configuration across a + power session loss (suspend / port-power event). When + this value is ``0`` (quirky devices), port poweroff is + disabled. + + ``/driver/unbind``: + Wakeup capable devices will block port poweroff. At + this time the only mechanism to clear the usb-internal + wakeup-capability for an interface device is to unbind + its driver. + +Summary of poweroff pre-requisite settings relative to a port device:: + + echo 0 > power/pm_qos_no_power_off + echo 0 > peer/power/pm_qos_no_power_off # if it exists + echo auto > power/control # this is the default value + echo auto > /power/control + echo 1 > /power/persist # this is the default value + +Suggested Userspace Port Power Policy +------------------------------------- + +As noted above userspace needs to be careful and deliberate about what +ports are enabled for poweroff. + +The default configuration is that all ports start with +``power/pm_qos_no_power_off`` set to ``1`` causing ports to always remain +active. + +Given confidence in the platform firmware's description of the ports +(ACPI _PLD record for a port populates 'connect_type') userspace can +clear pm_qos_no_power_off for all 'not used' ports. The same can be +done for 'hardwired' ports provided poweroff is coordinated with any +connection switch for the port. + +A more aggressive userspace policy is to enable USB port power off for +all ports (set ``/power/pm_qos_no_power_off`` to ``0``) when +some external factor indicates the user has stopped interacting with the +system. For example, a distro may want to enable power off all USB +ports when the screen blanks, and re-power them when the screen becomes +active. Smart phones and tablets may want to power off USB ports when +the user pushes the power button. diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt deleted file mode 100644 index 00e706997130..000000000000 --- a/Documentation/usb/power-management.txt +++ /dev/null @@ -1,772 +0,0 @@ - Power Management for USB - - Alan Stern - - Last-updated: February 2014 - - - Contents: - --------- - * What is Power Management? - * What is Remote Wakeup? - * When is a USB device idle? - * Forms of dynamic PM - * The user interface for dynamic PM - * Changing the default idle-delay time - * Warnings - * The driver interface for Power Management - * The driver interface for autosuspend and autoresume - * Other parts of the driver interface - * Mutual exclusion - * Interaction between dynamic PM and system PM - * xHCI hardware link PM - * USB Port Power Control - * User Interface for Port Power Control - * Suggested Userspace Port Power Policy - - - What is Power Management? - ------------------------- - -Power Management (PM) is the practice of saving energy by suspending -parts of a computer system when they aren't being used. While a -component is "suspended" it is in a nonfunctional low-power state; it -might even be turned off completely. A suspended component can be -"resumed" (returned to a functional full-power state) when the kernel -needs to use it. (There also are forms of PM in which components are -placed in a less functional but still usable state instead of being -suspended; an example would be reducing the CPU's clock rate. This -document will not discuss those other forms.) - -When the parts being suspended include the CPU and most of the rest of -the system, we speak of it as a "system suspend". When a particular -device is turned off while the system as a whole remains running, we -call it a "dynamic suspend" (also known as a "runtime suspend" or -"selective suspend"). This document concentrates mostly on how -dynamic PM is implemented in the USB subsystem, although system PM is -covered to some extent (see Documentation/power/*.txt for more -information about system PM). - -System PM support is present only if the kernel was built with CONFIG_SUSPEND -or CONFIG_HIBERNATION enabled. Dynamic PM support for USB is present whenever -the kernel was built with CONFIG_PM enabled. - -[Historically, dynamic PM support for USB was present only if the -kernel had been built with CONFIG_USB_SUSPEND enabled (which depended on -CONFIG_PM_RUNTIME). Starting with the 3.10 kernel release, dynamic PM support -for USB was present whenever the kernel was built with CONFIG_PM_RUNTIME -enabled. The CONFIG_USB_SUSPEND option had been eliminated.] - - - What is Remote Wakeup? - ---------------------- - -When a device has been suspended, it generally doesn't resume until -the computer tells it to. Likewise, if the entire computer has been -suspended, it generally doesn't resume until the user tells it to, say -by pressing a power button or opening the cover. - -However some devices have the capability of resuming by themselves, or -asking the kernel to resume them, or even telling the entire computer -to resume. This capability goes by several names such as "Wake On -LAN"; we will refer to it generically as "remote wakeup". When a -device is enabled for remote wakeup and it is suspended, it may resume -itself (or send a request to be resumed) in response to some external -event. Examples include a suspended keyboard resuming when a key is -pressed, or a suspended USB hub resuming when a device is plugged in. - - - When is a USB device idle? - -------------------------- - -A device is idle whenever the kernel thinks it's not busy doing -anything important and thus is a candidate for being suspended. The -exact definition depends on the device's driver; drivers are allowed -to declare that a device isn't idle even when there's no actual -communication taking place. (For example, a hub isn't considered idle -unless all the devices plugged into that hub are already suspended.) -In addition, a device isn't considered idle so long as a program keeps -its usbfs file open, whether or not any I/O is going on. - -If a USB device has no driver, its usbfs file isn't open, and it isn't -being accessed through sysfs, then it definitely is idle. - - - Forms of dynamic PM - ------------------- - -Dynamic suspends occur when the kernel decides to suspend an idle -device. This is called "autosuspend" for short. In general, a device -won't be autosuspended unless it has been idle for some minimum period -of time, the so-called idle-delay time. - -Of course, nothing the kernel does on its own initiative should -prevent the computer or its devices from working properly. If a -device has been autosuspended and a program tries to use it, the -kernel will automatically resume the device (autoresume). For the -same reason, an autosuspended device will usually have remote wakeup -enabled, if the device supports remote wakeup. - -It is worth mentioning that many USB drivers don't support -autosuspend. In fact, at the time of this writing (Linux 2.6.23) the -only drivers which do support it are the hub driver, kaweth, asix, -usblp, usblcd, and usb-skeleton (which doesn't count). If a -non-supporting driver is bound to a device, the device won't be -autosuspended. In effect, the kernel pretends the device is never -idle. - -We can categorize power management events in two broad classes: -external and internal. External events are those triggered by some -agent outside the USB stack: system suspend/resume (triggered by -userspace), manual dynamic resume (also triggered by userspace), and -remote wakeup (triggered by the device). Internal events are those -triggered within the USB stack: autosuspend and autoresume. Note that -all dynamic suspend events are internal; external agents are not -allowed to issue dynamic suspends. - - - The user interface for dynamic PM - --------------------------------- - -The user interface for controlling dynamic PM is located in the power/ -subdirectory of each USB device's sysfs directory, that is, in -/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The -relevant attribute files are: wakeup, control, and -autosuspend_delay_ms. (There may also be a file named "level"; this -file was deprecated as of the 2.6.35 kernel and replaced by the -"control" file. In 2.6.38 the "autosuspend" file will be deprecated -and replaced by the "autosuspend_delay_ms" file. The only difference -is that the newer file expresses the delay in milliseconds whereas the -older file uses seconds. Confusingly, both files are present in 2.6.37 -but only "autosuspend" works.) - - power/wakeup - - This file is empty if the device does not support - remote wakeup. Otherwise the file contains either the - word "enabled" or the word "disabled", and you can - write those words to the file. The setting determines - whether or not remote wakeup will be enabled when the - device is next suspended. (If the setting is changed - while the device is suspended, the change won't take - effect until the following suspend.) - - power/control - - This file contains one of two words: "on" or "auto". - You can write those words to the file to change the - device's setting. - - "on" means that the device should be resumed and - autosuspend is not allowed. (Of course, system - suspends are still allowed.) - - "auto" is the normal state in which the kernel is - allowed to autosuspend and autoresume the device. - - (In kernels up to 2.6.32, you could also specify - "suspend", meaning that the device should remain - suspended and autoresume was not allowed. This - setting is no longer supported.) - - power/autosuspend_delay_ms - - This file contains an integer value, which is the - number of milliseconds the device should remain idle - before the kernel will autosuspend it (the idle-delay - time). The default is 2000. 0 means to autosuspend - as soon as the device becomes idle, and negative - values mean never to autosuspend. You can write a - number to the file to change the autosuspend - idle-delay time. - -Writing "-1" to power/autosuspend_delay_ms and writing "on" to -power/control do essentially the same thing -- they both prevent the -device from being autosuspended. Yes, this is a redundancy in the -API. - -(In 2.6.21 writing "0" to power/autosuspend would prevent the device -from being autosuspended; the behavior was changed in 2.6.22. The -power/autosuspend attribute did not exist prior to 2.6.21, and the -power/level attribute did not exist prior to 2.6.22. power/control -was added in 2.6.34, and power/autosuspend_delay_ms was added in -2.6.37 but did not become functional until 2.6.38.) - - - Changing the default idle-delay time - ------------------------------------ - -The default autosuspend idle-delay time (in seconds) is controlled by -a module parameter in usbcore. You can specify the value when usbcore -is loaded. For example, to set it to 5 seconds instead of 2 you would -do: - - modprobe usbcore autosuspend=5 - -Equivalently, you could add to a configuration file in /etc/modprobe.d -a line saying: - - options usbcore autosuspend=5 - -Some distributions load the usbcore module very early during the boot -process, by means of a program or script running from an initramfs -image. To alter the parameter value you would have to rebuild that -image. - -If usbcore is compiled into the kernel rather than built as a loadable -module, you can add - - usbcore.autosuspend=5 - -to the kernel's boot command line. - -Finally, the parameter value can be changed while the system is -running. If you do: - - echo 5 >/sys/module/usbcore/parameters/autosuspend - -then each new USB device will have its autosuspend idle-delay -initialized to 5. (The idle-delay values for already existing devices -will not be affected.) - -Setting the initial default idle-delay to -1 will prevent any -autosuspend of any USB device. This has the benefit of allowing you -then to enable autosuspend for selected devices. - - - Warnings - -------- - -The USB specification states that all USB devices must support power -management. Nevertheless, the sad fact is that many devices do not -support it very well. You can suspend them all right, but when you -try to resume them they disconnect themselves from the USB bus or -they stop working entirely. This seems to be especially prevalent -among printers and scanners, but plenty of other types of device have -the same deficiency. - -For this reason, by default the kernel disables autosuspend (the -power/control attribute is initialized to "on") for all devices other -than hubs. Hubs, at least, appear to be reasonably well-behaved in -this regard. - -(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled -by default for almost all USB devices. A number of people experienced -problems as a result.) - -This means that non-hub devices won't be autosuspended unless the user -or a program explicitly enables it. As of this writing there aren't -any widespread programs which will do this; we hope that in the near -future device managers such as HAL will take on this added -responsibility. In the meantime you can always carry out the -necessary operations by hand or add them to a udev script. You can -also change the idle-delay time; 2 seconds is not the best choice for -every device. - -If a driver knows that its device has proper suspend/resume support, -it can enable autosuspend all by itself. For example, the video -driver for a laptop's webcam might do this (in recent kernels they -do), since these devices are rarely used and so should normally be -autosuspended. - -Sometimes it turns out that even when a device does work okay with -autosuspend there are still problems. For example, the usbhid driver, -which manages keyboards and mice, has autosuspend support. Tests with -a number of keyboards show that typing on a suspended keyboard, while -causing the keyboard to do a remote wakeup all right, will nonetheless -frequently result in lost keystrokes. Tests with mice show that some -of them will issue a remote-wakeup request in response to button -presses but not to motion, and some in response to neither. - -The kernel will not prevent you from enabling autosuspend on devices -that can't handle it. It is even possible in theory to damage a -device by suspending it at the wrong time. (Highly unlikely, but -possible.) Take care. - - - The driver interface for Power Management - ----------------------------------------- - -The requirements for a USB driver to support external power management -are pretty modest; the driver need only define - - .suspend - .resume - .reset_resume - -methods in its usb_driver structure, and the reset_resume method is -optional. The methods' jobs are quite simple: - - The suspend method is called to warn the driver that the - device is going to be suspended. If the driver returns a - negative error code, the suspend will be aborted. Normally - the driver will return 0, in which case it must cancel all - outstanding URBs (usb_kill_urb()) and not submit any more. - - The resume method is called to tell the driver that the - device has been resumed and the driver can return to normal - operation. URBs may once more be submitted. - - The reset_resume method is called to tell the driver that - the device has been resumed and it also has been reset. - The driver should redo any necessary device initialization, - since the device has probably lost most or all of its state - (although the interfaces will be in the same altsettings as - before the suspend). - -If the device is disconnected or powered down while it is suspended, -the disconnect method will be called instead of the resume or -reset_resume method. This is also quite likely to happen when -waking up from hibernation, as many systems do not maintain suspend -current to the USB host controllers during hibernation. (It's -possible to work around the hibernation-forces-disconnect problem by -using the USB Persist facility.) - -The reset_resume method is used by the USB Persist facility (see -Documentation/usb/persist.txt) and it can also be used under certain -circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a -device is reset during a resume and the driver does not have a -reset_resume method, the driver won't receive any notification about -the resume. Later kernels will call the driver's disconnect method; -2.6.23 doesn't do this. - -USB drivers are bound to interfaces, so their suspend and resume -methods get called when the interfaces are suspended or resumed. In -principle one might want to suspend some interfaces on a device (i.e., -force the drivers for those interface to stop all activity) without -suspending the other interfaces. The USB core doesn't allow this; all -interfaces are suspended when the device itself is suspended and all -interfaces are resumed when the device is resumed. It isn't possible -to suspend or resume some but not all of a device's interfaces. The -closest you can come is to unbind the interfaces' drivers. - - - The driver interface for autosuspend and autoresume - --------------------------------------------------- - -To support autosuspend and autoresume, a driver should implement all -three of the methods listed above. In addition, a driver indicates -that it supports autosuspend by setting the .supports_autosuspend flag -in its usb_driver structure. It is then responsible for informing the -USB core whenever one of its interfaces becomes busy or idle. The -driver does so by calling these six functions: - - int usb_autopm_get_interface(struct usb_interface *intf); - void usb_autopm_put_interface(struct usb_interface *intf); - int usb_autopm_get_interface_async(struct usb_interface *intf); - void usb_autopm_put_interface_async(struct usb_interface *intf); - void usb_autopm_get_interface_no_resume(struct usb_interface *intf); - void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); - -The functions work by maintaining a usage counter in the -usb_interface's embedded device structure. When the counter is > 0 -then the interface is deemed to be busy, and the kernel will not -autosuspend the interface's device. When the usage counter is = 0 -then the interface is considered to be idle, and the kernel may -autosuspend the device. - -Drivers need not be concerned about balancing changes to the usage -counter; the USB core will undo any remaining "get"s when a driver -is unbound from its interface. As a corollary, drivers must not call -any of the usb_autopm_* functions after their disconnect() routine has -returned. - -Drivers using the async routines are responsible for their own -synchronization and mutual exclusion. - - usb_autopm_get_interface() increments the usage counter and - does an autoresume if the device is suspended. If the - autoresume fails, the counter is decremented back. - - usb_autopm_put_interface() decrements the usage counter and - attempts an autosuspend if the new value is = 0. - - usb_autopm_get_interface_async() and - usb_autopm_put_interface_async() do almost the same things as - their non-async counterparts. The big difference is that they - use a workqueue to do the resume or suspend part of their - jobs. As a result they can be called in an atomic context, - such as an URB's completion handler, but when they return the - device will generally not yet be in the desired state. - - usb_autopm_get_interface_no_resume() and - usb_autopm_put_interface_no_suspend() merely increment or - decrement the usage counter; they do not attempt to carry out - an autoresume or an autosuspend. Hence they can be called in - an atomic context. - -The simplest usage pattern is that a driver calls -usb_autopm_get_interface() in its open routine and -usb_autopm_put_interface() in its close or release routine. But other -patterns are possible. - -The autosuspend attempts mentioned above will often fail for one -reason or another. For example, the power/control attribute might be -set to "on", or another interface in the same device might not be -idle. This is perfectly normal. If the reason for failure was that -the device hasn't been idle for long enough, a timer is scheduled to -carry out the operation automatically when the autosuspend idle-delay -has expired. - -Autoresume attempts also can fail, although failure would mean that -the device is no longer present or operating properly. Unlike -autosuspend, there's no idle-delay for an autoresume. - - - Other parts of the driver interface - ----------------------------------- - -Drivers can enable autosuspend for their devices by calling - - usb_enable_autosuspend(struct usb_device *udev); - -in their probe() routine, if they know that the device is capable of -suspending and resuming correctly. This is exactly equivalent to -writing "auto" to the device's power/control attribute. Likewise, -drivers can disable autosuspend by calling - - usb_disable_autosuspend(struct usb_device *udev); - -This is exactly the same as writing "on" to the power/control attribute. - -Sometimes a driver needs to make sure that remote wakeup is enabled -during autosuspend. For example, there's not much point -autosuspending a keyboard if the user can't cause the keyboard to do a -remote wakeup by typing on it. If the driver sets -intf->needs_remote_wakeup to 1, the kernel won't autosuspend the -device if remote wakeup isn't available. (If the device is already -autosuspended, though, setting this flag won't cause the kernel to -autoresume it. Normally a driver would set this flag in its probe -method, at which time the device is guaranteed not to be -autosuspended.) - -If a driver does its I/O asynchronously in interrupt context, it -should call usb_autopm_get_interface_async() before starting output and -usb_autopm_put_interface_async() when the output queue drains. When -it receives an input event, it should call - - usb_mark_last_busy(struct usb_device *udev); - -in the event handler. This tells the PM core that the device was just -busy and therefore the next autosuspend idle-delay expiration should -be pushed back. Many of the usb_autopm_* routines also make this call, -so drivers need to worry only when interrupt-driven input arrives. - -Asynchronous operation is always subject to races. For example, a -driver may call the usb_autopm_get_interface_async() routine at a time -when the core has just finished deciding the device has been idle for -long enough but not yet gotten around to calling the driver's suspend -method. The suspend method must be responsible for synchronizing with -the I/O request routine and the URB completion handler; it should -cause autosuspends to fail with -EBUSY if the driver needs to use the -device. - -External suspend calls should never be allowed to fail in this way, -only autosuspend calls. The driver can tell them apart by applying -the PMSG_IS_AUTO() macro to the message argument to the suspend -method; it will return True for internal PM events (autosuspend) and -False for external PM events. - - - Mutual exclusion - ---------------- - -For external events -- but not necessarily for autosuspend or -autoresume -- the device semaphore (udev->dev.sem) will be held when a -suspend or resume method is called. This implies that external -suspend/resume events are mutually exclusive with calls to probe, -disconnect, pre_reset, and post_reset; the USB core guarantees that -this is true of autosuspend/autoresume events as well. - -If a driver wants to block all suspend/resume calls during some -critical section, the best way is to lock the device and call -usb_autopm_get_interface() (and do the reverse at the end of the -critical section). Holding the device semaphore will block all -external PM calls, and the usb_autopm_get_interface() will prevent any -internal PM calls, even if it fails. (Exercise: Why?) - - - Interaction between dynamic PM and system PM - -------------------------------------------- - -Dynamic power management and system power management can interact in -a couple of ways. - -Firstly, a device may already be autosuspended when a system suspend -occurs. Since system suspends are supposed to be as transparent as -possible, the device should remain suspended following the system -resume. But this theory may not work out well in practice; over time -the kernel's behavior in this regard has changed. As of 2.6.37 the -policy is to resume all devices during a system resume and let them -handle their own runtime suspends afterward. - -Secondly, a dynamic power-management event may occur as a system -suspend is underway. The window for this is short, since system -suspends don't take long (a few seconds usually), but it can happen. -For example, a suspended device may send a remote-wakeup signal while -the system is suspending. The remote wakeup may succeed, which would -cause the system suspend to abort. If the remote wakeup doesn't -succeed, it may still remain active and thus cause the system to -resume as soon as the system suspend is complete. Or the remote -wakeup may fail and get lost. Which outcome occurs depends on timing -and on the hardware and firmware design. - - - xHCI hardware link PM - --------------------- - -xHCI host controller provides hardware link power management to usb2.0 -(xHCI 1.0 feature) and usb3.0 devices which support link PM. By -enabling hardware LPM, the host can automatically put the device into -lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices), -which state device can enter and resume very quickly. - -The user interface for controlling hardware LPM is located in the -power/ subdirectory of each USB device's sysfs directory, that is, in -/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The -relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm. - - power/usb2_hardware_lpm - - When a USB2 device which support LPM is plugged to a - xHCI host root hub which support software LPM, the - host will run a software LPM test for it; if the device - enters L1 state and resume successfully and the host - supports USB2 hardware LPM, this file will show up and - driver will enable hardware LPM for the device. You - can write y/Y/1 or n/N/0 to the file to enable/disable - USB2 hardware LPM manually. This is for test purpose mainly. - - power/usb3_hardware_lpm_u1 - power/usb3_hardware_lpm_u2 - - When a USB 3.0 lpm-capable device is plugged in to a - xHCI host which supports link PM, it will check if U1 - and U2 exit latencies have been set in the BOS - descriptor; if the check is passed and the host - supports USB3 hardware LPM, USB3 hardware LPM will be - enabled for the device and these files will be created. - The files hold a string value (enable or disable) - indicating whether or not USB3 hardware LPM U1 or U2 - is enabled for the device. - - USB Port Power Control - ---------------------- - -In addition to suspending endpoint devices and enabling hardware -controlled link power management, the USB subsystem also has the -capability to disable power to ports under some conditions. Power is -controlled through Set/ClearPortFeature(PORT_POWER) requests to a hub. -In the case of a root or platform-internal hub the host controller -driver translates PORT_POWER requests into platform firmware (ACPI) -method calls to set the port power state. For more background see the -Linux Plumbers Conference 2012 slides [1] and video [2]: - -Upon receiving a ClearPortFeature(PORT_POWER) request a USB port is -logically off, and may trigger the actual loss of VBUS to the port [3]. -VBUS may be maintained in the case where a hub gangs multiple ports into -a shared power well causing power to remain until all ports in the gang -are turned off. VBUS may also be maintained by hub ports configured for -a charging application. In any event a logically off port will lose -connection with its device, not respond to hotplug events, and not -respond to remote wakeup events*. - -WARNING: turning off a port may result in the inability to hot add a device. -Please see "User Interface for Port Power Control" for details. - -As far as the effect on the device itself it is similar to what a device -goes through during system suspend, i.e. the power session is lost. Any -USB device or driver that misbehaves with system suspend will be -similarly affected by a port power cycle event. For this reason the -implementation shares the same device recovery path (and honors the same -quirks) as the system resume path for the hub. - -[1]: http://dl.dropbox.com/u/96820575/sarah-sharp-lpt-port-power-off2-mini.pdf -[2]: http://linuxplumbers.ubicast.tv/videos/usb-port-power-off-kerneluserspace-api/ -[3]: USB 3.1 Section 10.12 -* wakeup note: if a device is configured to send wakeup events the port - power control implementation will block poweroff attempts on that - port. - - - User Interface for Port Power Control - ------------------------------------- - -The port power control mechanism uses the PM runtime system. Poweroff is -requested by clearing the power/pm_qos_no_power_off flag of the port device -(defaults to 1). If the port is disconnected it will immediately receive a -ClearPortFeature(PORT_POWER) request. Otherwise, it will honor the pm runtime -rules and require the attached child device and all descendants to be suspended. -This mechanism is dependent on the hub advertising port power switching in its -hub descriptor (wHubCharacteristics logical power switching mode field). - -Note, some interface devices/drivers do not support autosuspend. Userspace may -need to unbind the interface drivers before the usb_device will suspend. An -unbound interface device is suspended by default. When unbinding, be careful -to unbind interface drivers, not the driver of the parent usb device. Also, -leave hub interface drivers bound. If the driver for the usb device (not -interface) is unbound the kernel is no longer able to resume the device. If a -hub interface driver is unbound, control of its child ports is lost and all -attached child-devices will disconnect. A good rule of thumb is that if the -'driver/module' link for a device points to /sys/module/usbcore then unbinding -it will interfere with port power control. - -Example of the relevant files for port power control. Note, in this example -these files are relative to a usb hub device (prefix). - - prefix=/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1 - - attached child device + - hub port device + | - hub interface device + | | - v v v - $prefix/3-1:1.0/3-1-port1/device - - $prefix/3-1:1.0/3-1-port1/power/pm_qos_no_power_off - $prefix/3-1:1.0/3-1-port1/device/power/control - $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind - $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind - ... - $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind - -In addition to these files some ports may have a 'peer' link to a port on -another hub. The expectation is that all superspeed ports have a -hi-speed peer. - -$prefix/3-1:1.0/3-1-port1/peer -> ../../../../usb2/2-1/2-1:1.0/2-1-port1 -../../../../usb2/2-1/2-1:1.0/2-1-port1/peer -> ../../../../usb3/3-1/3-1:1.0/3-1-port1 - -Distinct from 'companion ports', or 'ehci/xhci shared switchover ports' -peer ports are simply the hi-speed and superspeed interface pins that -are combined into a single usb3 connector. Peer ports share the same -ancestor XHCI device. - -While a superspeed port is powered off a device may downgrade its -connection and attempt to connect to the hi-speed pins. The -implementation takes steps to prevent this: - -1/ Port suspend is sequenced to guarantee that hi-speed ports are powered-off - before their superspeed peer is permitted to power-off. The implication is - that the setting pm_qos_no_power_off to zero on a superspeed port may not cause - the port to power-off until its highspeed peer has gone to its runtime suspend - state. Userspace must take care to order the suspensions if it wants to - guarantee that a superspeed port will power-off. - -2/ Port resume is sequenced to force a superspeed port to power-on prior to its - highspeed peer. - -3/ Port resume always triggers an attached child device to resume. After a - power session is lost the device may have been removed, or need reset. - Resuming the child device when the parent port regains power resolves those - states and clamps the maximum port power cycle frequency at the rate the child - device can suspend (autosuspend-delay) and resume (reset-resume latency). - -Sysfs files relevant for port power control: - /power/pm_qos_no_power_off: - This writable flag controls the state of an idle port. - Once all children and descendants have suspended the - port may suspend/poweroff provided that - pm_qos_no_power_off is '0'. If pm_qos_no_power_off is - '1' the port will remain active/powered regardless of - the stats of descendants. Defaults to 1. - - /power/runtime_status: - This file reflects whether the port is 'active' (power is on) - or 'suspended' (logically off). There is no indication to - userspace whether VBUS is still supplied. - - /connect_type: - An advisory read-only flag to userspace indicating the - location and connection type of the port. It returns - one of four values 'hotplug', 'hardwired', 'not used', - and 'unknown'. All values, besides unknown, are set by - platform firmware. - - "hotplug" indicates an externally connectable/visible - port on the platform. Typically userspace would choose - to keep such a port powered to handle new device - connection events. - - "hardwired" refers to a port that is not visible but - connectable. Examples are internal ports for USB - bluetooth that can be disconnected via an external - switch or a port with a hardwired USB camera. It is - expected to be safe to allow these ports to suspend - provided pm_qos_no_power_off is coordinated with any - switch that gates connections. Userspace must arrange - for the device to be connected prior to the port - powering off, or to activate the port prior to enabling - connection via a switch. - - "not used" refers to an internal port that is expected - to never have a device connected to it. These may be - empty internal ports, or ports that are not physically - exposed on a platform. Considered safe to be - powered-off at all times. - - "unknown" means platform firmware does not provide - information for this port. Most commonly refers to - external hub ports which should be considered 'hotplug' - for policy decisions. - - NOTE1: since we are relying on the BIOS to get this ACPI - information correct, the USB port descriptions may be - missing or wrong. - - NOTE2: Take care in clearing pm_qos_no_power_off. Once - power is off this port will - not respond to new connect events. - - Once a child device is attached additional constraints are - applied before the port is allowed to poweroff. - - /power/control: - Must be 'auto', and the port will not - power down until /power/runtime_status - reflects the 'suspended' state. Default - value is controlled by child device driver. - - /power/persist: - This defaults to '1' for most devices and indicates if - kernel can persist the device's configuration across a - power session loss (suspend / port-power event). When - this value is '0' (quirky devices), port poweroff is - disabled. - - /driver/unbind: - Wakeup capable devices will block port poweroff. At - this time the only mechanism to clear the usb-internal - wakeup-capability for an interface device is to unbind - its driver. - -Summary of poweroff pre-requisite settings relative to a port device: - - echo 0 > power/pm_qos_no_power_off - echo 0 > peer/power/pm_qos_no_power_off # if it exists - echo auto > power/control # this is the default value - echo auto > /power/control - echo 1 > /power/persist # this is the default value - - Suggested Userspace Port Power Policy - ------------------------------------- - -As noted above userspace needs to be careful and deliberate about what -ports are enabled for poweroff. - -The default configuration is that all ports start with -power/pm_qos_no_power_off set to '1' causing ports to always remain -active. - -Given confidence in the platform firmware's description of the ports -(ACPI _PLD record for a port populates 'connect_type') userspace can -clear pm_qos_no_power_off for all 'not used' ports. The same can be -done for 'hardwired' ports provided poweroff is coordinated with any -connection switch for the port. - -A more aggressive userspace policy is to enable USB port power off for -all ports (set /power/pm_qos_no_power_off to '0') when -some external factor indicates the user has stopped interacting with the -system. For example, a distro may want to enable power off all USB -ports when the screen blanks, and re-power them when the screen becomes -active. Smart phones and tablets may want to power off USB ports when -the user pushes the power button.