From: Benjamin Herrenschmidt Date: Thu, 24 Sep 2009 19:30:05 +0000 (+0000) Subject: powerpc/chrp: Use the same RTAS daemon as pSeries X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3d541c4b7f6efd55a98189afd1b2f1c9d048c1b3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/chrp: Use the same RTAS daemon as pSeries The CHRP code has some fishy timer based code to scan the RTAS event log, which uses a 1KB stack buffer and doesn't even use the results. The pSeries code as a nicer daemon that allows userspace to read the event log and basically uses the same RTAS interface This patch moves rtasd.c out of platform/pseries and makes it usable by CHRP, after removing the old crufty event log mechanism in there. The nvram logging part of the daemon is still only available on 64-bit since the underlying nvram management routines aren't currently shared. Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 3faa39114219..c002b0410219 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -46,6 +46,7 @@ procfs-y := proc_powerpc.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y) +obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c new file mode 100644 index 000000000000..2e4832ab2108 --- /dev/null +++ b/arch/powerpc/kernel/rtasd.c @@ -0,0 +1,539 @@ +/* + * Copyright (C) 2001 Anton Blanchard , IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Communication to userspace based on kernel/printk.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + + +static DEFINE_SPINLOCK(rtasd_log_lock); + +static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait); + +static char *rtas_log_buf; +static unsigned long rtas_log_start; +static unsigned long rtas_log_size; + +static int surveillance_timeout = -1; + +static unsigned int rtas_error_log_max; +static unsigned int rtas_error_log_buffer_max; + +/* RTAS service tokens */ +static unsigned int event_scan; +static unsigned int rtas_event_scan_rate; + +static int full_rtas_msgs = 0; + +/* Stop logging to nvram after first fatal error */ +static int logging_enabled; /* Until we initialize everything, + * make sure we don't try logging + * anything */ +static int error_log_cnt; + +/* + * Since we use 32 bit RTAS, the physical address of this must be below + * 4G or else bad things happen. Allocate this in the kernel data and + * make it big enough. + */ +static unsigned char logdata[RTAS_ERROR_LOG_MAX]; + +static char *rtas_type[] = { + "Unknown", "Retry", "TCE Error", "Internal Device Failure", + "Timeout", "Data Parity", "Address Parity", "Cache Parity", + "Address Invalid", "ECC Uncorrected", "ECC Corrupted", +}; + +static char *rtas_event_type(int type) +{ + if ((type > 0) && (type < 11)) + return rtas_type[type]; + + switch (type) { + case RTAS_TYPE_EPOW: + return "EPOW"; + case RTAS_TYPE_PLATFORM: + return "Platform Error"; + case RTAS_TYPE_IO: + return "I/O Event"; + case RTAS_TYPE_INFO: + return "Platform Information Event"; + case RTAS_TYPE_DEALLOC: + return "Resource Deallocation Event"; + case RTAS_TYPE_DUMP: + return "Dump Notification Event"; + } + + return rtas_type[0]; +} + +/* To see this info, grep RTAS /var/log/messages and each entry + * will be collected together with obvious begin/end. + * There will be a unique identifier on the begin and end lines. + * This will persist across reboots. + * + * format of error logs returned from RTAS: + * bytes (size) : contents + * -------------------------------------------------------- + * 0-7 (8) : rtas_error_log + * 8-47 (40) : extended info + * 48-51 (4) : vendor id + * 52-1023 (vendor specific) : location code and debug data + */ +static void printk_log_rtas(char *buf, int len) +{ + + int i,j,n = 0; + int perline = 16; + char buffer[64]; + char * str = "RTAS event"; + + if (full_rtas_msgs) { + printk(RTAS_DEBUG "%d -------- %s begin --------\n", + error_log_cnt, str); + + /* + * Print perline bytes on each line, each line will start + * with RTAS and a changing number, so syslogd will + * print lines that are otherwise the same. Separate every + * 4 bytes with a space. + */ + for (i = 0; i < len; i++) { + j = i % perline; + if (j == 0) { + memset(buffer, 0, sizeof(buffer)); + n = sprintf(buffer, "RTAS %d:", i/perline); + } + + if ((i % 4) == 0) + n += sprintf(buffer+n, " "); + + n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]); + + if (j == (perline-1)) + printk(KERN_DEBUG "%s\n", buffer); + } + if ((i % perline) != 0) + printk(KERN_DEBUG "%s\n", buffer); + + printk(RTAS_DEBUG "%d -------- %s end ----------\n", + error_log_cnt, str); + } else { + struct rtas_error_log *errlog = (struct rtas_error_log *)buf; + + printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n", + error_log_cnt, rtas_event_type(errlog->type), + errlog->severity); + } +} + +static int log_rtas_len(char * buf) +{ + int len; + struct rtas_error_log *err; + + /* rtas fixed header */ + len = 8; + err = (struct rtas_error_log *)buf; + if (err->extended_log_length) { + + /* extended header */ + len += err->extended_log_length; + } + + if (rtas_error_log_max == 0) + rtas_error_log_max = rtas_get_error_log_max(); + + if (len > rtas_error_log_max) + len = rtas_error_log_max; + + return len; +} + +/* + * First write to nvram, if fatal error, that is the only + * place we log the info. The error will be picked up + * on the next reboot by rtasd. If not fatal, run the + * method for the type of error. Currently, only RTAS + * errors have methods implemented, but in the future + * there might be a need to store data in nvram before a + * call to panic(). + * + * XXX We write to nvram periodically, to indicate error has + * been written and sync'd, but there is a possibility + * that if we don't shutdown correctly, a duplicate error + * record will be created on next reboot. + */ +void pSeries_log_error(char *buf, unsigned int err_type, int fatal) +{ + unsigned long offset; + unsigned long s; + int len = 0; + + pr_debug("rtasd: logging event\n"); + if (buf == NULL) + return; + + spin_lock_irqsave(&rtasd_log_lock, s); + + /* get length and increase count */ + switch (err_type & ERR_TYPE_MASK) { + case ERR_TYPE_RTAS_LOG: + len = log_rtas_len(buf); + if (!(err_type & ERR_FLAG_BOOT)) + error_log_cnt++; + break; + case ERR_TYPE_KERNEL_PANIC: + default: + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + +#ifdef CONFIG_PPC64 + /* Write error to NVRAM */ + if (logging_enabled && !(err_type & ERR_FLAG_BOOT)) + nvram_write_error_log(buf, len, err_type, error_log_cnt); +#endif /* CONFIG_PPC64 */ + + /* + * rtas errors can occur during boot, and we do want to capture + * those somewhere, even if nvram isn't ready (why not?), and even + * if rtasd isn't ready. Put them into the boot log, at least. + */ + if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG) + printk_log_rtas(buf, len); + + /* Check to see if we need to or have stopped logging */ + if (fatal || !logging_enabled) { + logging_enabled = 0; + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + + /* call type specific method for error */ + switch (err_type & ERR_TYPE_MASK) { + case ERR_TYPE_RTAS_LOG: + offset = rtas_error_log_buffer_max * + ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK); + + /* First copy over sequence number */ + memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int)); + + /* Second copy over error log data */ + offset += sizeof(int); + memcpy(&rtas_log_buf[offset], buf, len); + + if (rtas_log_size < LOG_NUMBER) + rtas_log_size += 1; + else + rtas_log_start += 1; + + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ + spin_unlock_irqrestore(&rtasd_log_lock, s); + wake_up_interruptible(&rtas_log_wait); + break; + case ERR_TYPE_KERNEL_PANIC: + default: + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + +} + +static int rtas_log_open(struct inode * inode, struct file * file) +{ + return 0; +} + +static int rtas_log_release(struct inode * inode, struct file * file) +{ + return 0; +} + +/* This will check if all events are logged, if they are then, we + * know that we can safely clear the events in NVRAM. + * Next we'll sit and wait for something else to log. + */ +static ssize_t rtas_log_read(struct file * file, char __user * buf, + size_t count, loff_t *ppos) +{ + int error; + char *tmp; + unsigned long s; + unsigned long offset; + + if (!buf || count < rtas_error_log_buffer_max) + return -EINVAL; + + count = rtas_error_log_buffer_max; + + if (!access_ok(VERIFY_WRITE, buf, count)) + return -EFAULT; + + tmp = kmalloc(count, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + spin_lock_irqsave(&rtasd_log_lock, s); + + /* if it's 0, then we know we got the last one (the one in NVRAM) */ + while (rtas_log_size == 0) { + if (file->f_flags & O_NONBLOCK) { + spin_unlock_irqrestore(&rtasd_log_lock, s); + error = -EAGAIN; + goto out; + } + + if (!logging_enabled) { + spin_unlock_irqrestore(&rtasd_log_lock, s); + error = -ENODATA; + goto out; + } +#ifdef CONFIG_PPC64 + nvram_clear_error_log(); +#endif /* CONFIG_PPC64 */ + + spin_unlock_irqrestore(&rtasd_log_lock, s); + error = wait_event_interruptible(rtas_log_wait, rtas_log_size); + if (error) + goto out; + spin_lock_irqsave(&rtasd_log_lock, s); + } + + offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK); + memcpy(tmp, &rtas_log_buf[offset], count); + + rtas_log_start += 1; + rtas_log_size -= 1; + spin_unlock_irqrestore(&rtasd_log_lock, s); + + error = copy_to_user(buf, tmp, count) ? -EFAULT : count; +out: + kfree(tmp); + return error; +} + +static unsigned int rtas_log_poll(struct file *file, poll_table * wait) +{ + poll_wait(file, &rtas_log_wait, wait); + if (rtas_log_size) + return POLLIN | POLLRDNORM; + return 0; +} + +static const struct file_operations proc_rtas_log_operations = { + .read = rtas_log_read, + .poll = rtas_log_poll, + .open = rtas_log_open, + .release = rtas_log_release, +}; + +static int enable_surveillance(int timeout) +{ + int error; + + error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout); + + if (error == 0) + return 0; + + if (error == -EINVAL) { + printk(KERN_DEBUG "rtasd: surveillance not supported\n"); + return 0; + } + + printk(KERN_ERR "rtasd: could not update surveillance\n"); + return -1; +} + +static void do_event_scan(void) +{ + int error; + do { + memset(logdata, 0, rtas_error_log_max); + error = rtas_call(event_scan, 4, 1, NULL, + RTAS_EVENT_SCAN_ALL_EVENTS, 0, + __pa(logdata), rtas_error_log_max); + if (error == -1) { + printk(KERN_ERR "event-scan failed\n"); + break; + } + + if (error == 0) + pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0); + + } while(error == 0); +} + +static void rtas_event_scan(struct work_struct *w); +DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan); + +/* + * Delay should be at least one second since some machines have problems if + * we call event-scan too quickly. + */ +static unsigned long event_scan_delay = 1*HZ; +static int first_pass = 1; + +static void rtas_event_scan(struct work_struct *w) +{ + unsigned int cpu; + + do_event_scan(); + + get_online_cpus(); + + cpu = next_cpu(smp_processor_id(), cpu_online_map); + if (cpu == NR_CPUS) { + cpu = first_cpu(cpu_online_map); + + if (first_pass) { + first_pass = 0; + event_scan_delay = 30*HZ/rtas_event_scan_rate; + + if (surveillance_timeout != -1) { + pr_debug("rtasd: enabling surveillance\n"); + enable_surveillance(surveillance_timeout); + pr_debug("rtasd: surveillance enabled\n"); + } + } + } + + schedule_delayed_work_on(cpu, &event_scan_work, + __round_jiffies_relative(event_scan_delay, cpu)); + + put_online_cpus(); +} + +#ifdef CONFIG_PPC64 +static void retreive_nvram_error_log(void) +{ + unsigned int err_type ; + int rc ; + + /* See if we have any error stored in NVRAM */ + memset(logdata, 0, rtas_error_log_max); + rc = nvram_read_error_log(logdata, rtas_error_log_max, + &err_type, &error_log_cnt); + /* We can use rtas_log_buf now */ + logging_enabled = 1; + if (!rc) { + if (err_type != ERR_FLAG_ALREADY_LOGGED) { + pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0); + } + } +} +#else /* CONFIG_PPC64 */ +static void retreive_nvram_error_log(void) +{ +} +#endif /* CONFIG_PPC64 */ + +static void start_event_scan(void) +{ + printk(KERN_DEBUG "RTAS daemon started\n"); + pr_debug("rtasd: will sleep for %d milliseconds\n", + (30000 / rtas_event_scan_rate)); + + /* Retreive errors from nvram if any */ + retreive_nvram_error_log(); + + schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work, + event_scan_delay); +} + +static int __init rtas_init(void) +{ + struct proc_dir_entry *entry; + + if (!machine_is(pseries) && !machine_is(chrp)) + return 0; + + /* No RTAS */ + event_scan = rtas_token("event-scan"); + if (event_scan == RTAS_UNKNOWN_SERVICE) { + printk(KERN_INFO "rtasd: No event-scan on system\n"); + return -ENODEV; + } + + rtas_event_scan_rate = rtas_token("rtas-event-scan-rate"); + if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n"); + return -ENODEV; + } + + /* Make room for the sequence number */ + rtas_error_log_max = rtas_get_error_log_max(); + rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); + + rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); + if (!rtas_log_buf) { + printk(KERN_ERR "rtasd: no memory\n"); + return -ENOMEM; + } + + entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL, + &proc_rtas_log_operations); + if (!entry) + printk(KERN_ERR "Failed to create error_log proc entry\n"); + + start_event_scan(); + + return 0; +} +__initcall(rtas_init); + +static int __init surveillance_setup(char *str) +{ + int i; + + /* We only do surveillance on pseries */ + if (!machine_is(pseries)) + return 0; + + if (get_option(&str,&i)) { + if (i >= 0 && i <= 255) + surveillance_timeout = i; + } + + return 1; +} +__setup("surveillance=", surveillance_setup); + +static int __init rtasmsgs_setup(char *str) +{ + if (strcmp(str, "on") == 0) + full_rtas_msgs = 1; + else if (strcmp(str, "off") == 0) + full_rtas_msgs = 0; + + return 1; +} +__setup("rtasmsgs=", rtasmsgs_setup); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 04a8061045c4..56bf12692f37 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -86,6 +86,11 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config PPC_RTAS_DAEMON + bool + depends on PPC_RTAS + default n + config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig index 37d438bd5b7a..bc0b0efdc5fe 100644 --- a/arch/powerpc/platforms/chrp/Kconfig +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -5,6 +5,8 @@ config PPC_CHRP select PPC_I8259 select PPC_INDIRECT_PCI select PPC_RTAS + select PPC_RTAS_DAEMON + select RTAS_ERROR_LOGGING select PPC_MPC106 select PPC_UDBG_16550 select PPC_NATIVE diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index cd4ad9aea760..52f3df3b4ca0 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -364,19 +364,6 @@ void __init chrp_setup_arch(void) if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); } -void -chrp_event_scan(unsigned long unused) -{ - unsigned char log[1024]; - int ret = 0; - - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024); - mod_timer(&__get_cpu_var(heartbeat_timer), - jiffies + event_scan_interval); -} - static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) { unsigned int cascade_irq = i8259_irq(); @@ -568,9 +555,6 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { - struct device_node *device; - const unsigned int *p = NULL; - #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -582,40 +566,6 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = of_find_node_by_name(NULL, "rtas"); - if (device) - p = of_get_property(device, "rtas-event-scan-rate", NULL); - if (p && *p) { - /* - * Arrange to call chrp_event_scan at least *p times - * per minute. We use 59 rather than 60 here so that - * the rate will be slightly higher than the minimum. - * This all assumes we don't do hotplug CPU on any - * machine that needs the event scans done. - */ - unsigned long interval, offset; - int cpu, ncpus; - struct timer_list *timer; - - interval = HZ * 59 / *p; - offset = HZ; - ncpus = num_online_cpus(); - event_scan_interval = ncpus * interval; - for (cpu = 0; cpu < ncpus; ++cpu) { - timer = &per_cpu(heartbeat_timer, cpu); - setup_timer(timer, chrp_event_scan, 0); - timer->expires = jiffies + offset; - add_timer_on(timer, cpu); - offset += interval; - } - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, interval); - } - of_node_put(device); - if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index f0e6f28427bd..26a24bd92623 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -4,6 +4,7 @@ config PPC_PSERIES select MPIC select PPC_I8259 select PPC_RTAS + select PPC_RTAS_DAEMON select RTAS_ERROR_LOGGING select PPC_UDBG_16550 select PPC_NATIVE diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 790c0b872d4f..4b1c422b8145 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -7,7 +7,7 @@ EXTRA_CFLAGS += -DDEBUG endif obj-y := lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o \ + setup.o iommu.o ras.o \ firmware.o power.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c deleted file mode 100644 index b3cbac855924..000000000000 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * Copyright (C) 2001 Anton Blanchard , IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Communication to userspace based on kernel/printk.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - - -static DEFINE_SPINLOCK(rtasd_log_lock); - -static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait); - -static char *rtas_log_buf; -static unsigned long rtas_log_start; -static unsigned long rtas_log_size; - -static int surveillance_timeout = -1; -static unsigned int rtas_error_log_max; -static unsigned int rtas_error_log_buffer_max; - -/* RTAS service tokens */ -static unsigned int event_scan; -static unsigned int rtas_event_scan_rate; - -static int full_rtas_msgs = 0; - -/* Stop logging to nvram after first fatal error */ -static int logging_enabled; /* Until we initialize everything, - * make sure we don't try logging - * anything */ -static int error_log_cnt; - -/* - * Since we use 32 bit RTAS, the physical address of this must be below - * 4G or else bad things happen. Allocate this in the kernel data and - * make it big enough. - */ -static unsigned char logdata[RTAS_ERROR_LOG_MAX]; - -static char *rtas_type[] = { - "Unknown", "Retry", "TCE Error", "Internal Device Failure", - "Timeout", "Data Parity", "Address Parity", "Cache Parity", - "Address Invalid", "ECC Uncorrected", "ECC Corrupted", -}; - -static char *rtas_event_type(int type) -{ - if ((type > 0) && (type < 11)) - return rtas_type[type]; - - switch (type) { - case RTAS_TYPE_EPOW: - return "EPOW"; - case RTAS_TYPE_PLATFORM: - return "Platform Error"; - case RTAS_TYPE_IO: - return "I/O Event"; - case RTAS_TYPE_INFO: - return "Platform Information Event"; - case RTAS_TYPE_DEALLOC: - return "Resource Deallocation Event"; - case RTAS_TYPE_DUMP: - return "Dump Notification Event"; - } - - return rtas_type[0]; -} - -/* To see this info, grep RTAS /var/log/messages and each entry - * will be collected together with obvious begin/end. - * There will be a unique identifier on the begin and end lines. - * This will persist across reboots. - * - * format of error logs returned from RTAS: - * bytes (size) : contents - * -------------------------------------------------------- - * 0-7 (8) : rtas_error_log - * 8-47 (40) : extended info - * 48-51 (4) : vendor id - * 52-1023 (vendor specific) : location code and debug data - */ -static void printk_log_rtas(char *buf, int len) -{ - - int i,j,n = 0; - int perline = 16; - char buffer[64]; - char * str = "RTAS event"; - - if (full_rtas_msgs) { - printk(RTAS_DEBUG "%d -------- %s begin --------\n", - error_log_cnt, str); - - /* - * Print perline bytes on each line, each line will start - * with RTAS and a changing number, so syslogd will - * print lines that are otherwise the same. Separate every - * 4 bytes with a space. - */ - for (i = 0; i < len; i++) { - j = i % perline; - if (j == 0) { - memset(buffer, 0, sizeof(buffer)); - n = sprintf(buffer, "RTAS %d:", i/perline); - } - - if ((i % 4) == 0) - n += sprintf(buffer+n, " "); - - n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]); - - if (j == (perline-1)) - printk(KERN_DEBUG "%s\n", buffer); - } - if ((i % perline) != 0) - printk(KERN_DEBUG "%s\n", buffer); - - printk(RTAS_DEBUG "%d -------- %s end ----------\n", - error_log_cnt, str); - } else { - struct rtas_error_log *errlog = (struct rtas_error_log *)buf; - - printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n", - error_log_cnt, rtas_event_type(errlog->type), - errlog->severity); - } -} - -static int log_rtas_len(char * buf) -{ - int len; - struct rtas_error_log *err; - - /* rtas fixed header */ - len = 8; - err = (struct rtas_error_log *)buf; - if (err->extended_log_length) { - - /* extended header */ - len += err->extended_log_length; - } - - if (rtas_error_log_max == 0) - rtas_error_log_max = rtas_get_error_log_max(); - - if (len > rtas_error_log_max) - len = rtas_error_log_max; - - return len; -} - -/* - * First write to nvram, if fatal error, that is the only - * place we log the info. The error will be picked up - * on the next reboot by rtasd. If not fatal, run the - * method for the type of error. Currently, only RTAS - * errors have methods implemented, but in the future - * there might be a need to store data in nvram before a - * call to panic(). - * - * XXX We write to nvram periodically, to indicate error has - * been written and sync'd, but there is a possibility - * that if we don't shutdown correctly, a duplicate error - * record will be created on next reboot. - */ -void pSeries_log_error(char *buf, unsigned int err_type, int fatal) -{ - unsigned long offset; - unsigned long s; - int len = 0; - - pr_debug("rtasd: logging event\n"); - if (buf == NULL) - return; - - spin_lock_irqsave(&rtasd_log_lock, s); - - /* get length and increase count */ - switch (err_type & ERR_TYPE_MASK) { - case ERR_TYPE_RTAS_LOG: - len = log_rtas_len(buf); - if (!(err_type & ERR_FLAG_BOOT)) - error_log_cnt++; - break; - case ERR_TYPE_KERNEL_PANIC: - default: - WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ - spin_unlock_irqrestore(&rtasd_log_lock, s); - return; - } - - /* Write error to NVRAM */ - if (logging_enabled && !(err_type & ERR_FLAG_BOOT)) - nvram_write_error_log(buf, len, err_type, error_log_cnt); - - /* - * rtas errors can occur during boot, and we do want to capture - * those somewhere, even if nvram isn't ready (why not?), and even - * if rtasd isn't ready. Put them into the boot log, at least. - */ - if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG) - printk_log_rtas(buf, len); - - /* Check to see if we need to or have stopped logging */ - if (fatal || !logging_enabled) { - logging_enabled = 0; - WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ - spin_unlock_irqrestore(&rtasd_log_lock, s); - return; - } - - /* call type specific method for error */ - switch (err_type & ERR_TYPE_MASK) { - case ERR_TYPE_RTAS_LOG: - offset = rtas_error_log_buffer_max * - ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK); - - /* First copy over sequence number */ - memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int)); - - /* Second copy over error log data */ - offset += sizeof(int); - memcpy(&rtas_log_buf[offset], buf, len); - - if (rtas_log_size < LOG_NUMBER) - rtas_log_size += 1; - else - rtas_log_start += 1; - - WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ - spin_unlock_irqrestore(&rtasd_log_lock, s); - wake_up_interruptible(&rtas_log_wait); - break; - case ERR_TYPE_KERNEL_PANIC: - default: - WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ - spin_unlock_irqrestore(&rtasd_log_lock, s); - return; - } - -} - - -static int rtas_log_open(struct inode * inode, struct file * file) -{ - return 0; -} - -static int rtas_log_release(struct inode * inode, struct file * file) -{ - return 0; -} - -/* This will check if all events are logged, if they are then, we - * know that we can safely clear the events in NVRAM. - * Next we'll sit and wait for something else to log. - */ -static ssize_t rtas_log_read(struct file * file, char __user * buf, - size_t count, loff_t *ppos) -{ - int error; - char *tmp; - unsigned long s; - unsigned long offset; - - if (!buf || count < rtas_error_log_buffer_max) - return -EINVAL; - - count = rtas_error_log_buffer_max; - - if (!access_ok(VERIFY_WRITE, buf, count)) - return -EFAULT; - - tmp = kmalloc(count, GFP_KERNEL); - if (!tmp) - return -ENOMEM; - - spin_lock_irqsave(&rtasd_log_lock, s); - /* if it's 0, then we know we got the last one (the one in NVRAM) */ - while (rtas_log_size == 0) { - if (file->f_flags & O_NONBLOCK) { - spin_unlock_irqrestore(&rtasd_log_lock, s); - error = -EAGAIN; - goto out; - } - - if (!logging_enabled) { - spin_unlock_irqrestore(&rtasd_log_lock, s); - error = -ENODATA; - goto out; - } - nvram_clear_error_log(); - - spin_unlock_irqrestore(&rtasd_log_lock, s); - error = wait_event_interruptible(rtas_log_wait, rtas_log_size); - if (error) - goto out; - spin_lock_irqsave(&rtasd_log_lock, s); - } - - offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK); - memcpy(tmp, &rtas_log_buf[offset], count); - - rtas_log_start += 1; - rtas_log_size -= 1; - spin_unlock_irqrestore(&rtasd_log_lock, s); - - error = copy_to_user(buf, tmp, count) ? -EFAULT : count; -out: - kfree(tmp); - return error; -} - -static unsigned int rtas_log_poll(struct file *file, poll_table * wait) -{ - poll_wait(file, &rtas_log_wait, wait); - if (rtas_log_size) - return POLLIN | POLLRDNORM; - return 0; -} - -static const struct file_operations proc_rtas_log_operations = { - .read = rtas_log_read, - .poll = rtas_log_poll, - .open = rtas_log_open, - .release = rtas_log_release, -}; - -static int enable_surveillance(int timeout) -{ - int error; - - error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout); - - if (error == 0) - return 0; - - if (error == -EINVAL) { - printk(KERN_DEBUG "rtasd: surveillance not supported\n"); - return 0; - } - - printk(KERN_ERR "rtasd: could not update surveillance\n"); - return -1; -} - -static void do_event_scan(void) -{ - int error; - do { - memset(logdata, 0, rtas_error_log_max); - error = rtas_call(event_scan, 4, 1, NULL, - RTAS_EVENT_SCAN_ALL_EVENTS, 0, - __pa(logdata), rtas_error_log_max); - if (error == -1) { - printk(KERN_ERR "event-scan failed\n"); - break; - } - - if (error == 0) - pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0); - - } while(error == 0); -} - -static void rtas_event_scan(struct work_struct *w); -DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan); - -/* - * Delay should be at least one second since some machines have problems if - * we call event-scan too quickly. - */ -static unsigned long event_scan_delay = 1*HZ; -static int first_pass = 1; - -static void rtas_event_scan(struct work_struct *w) -{ - unsigned int cpu; - - do_event_scan(); - - get_online_cpus(); - - cpu = next_cpu(smp_processor_id(), cpu_online_map); - if (cpu == NR_CPUS) { - cpu = first_cpu(cpu_online_map); - - if (first_pass) { - first_pass = 0; - event_scan_delay = 30*HZ/rtas_event_scan_rate; - - if (surveillance_timeout != -1) { - pr_debug("rtasd: enabling surveillance\n"); - enable_surveillance(surveillance_timeout); - pr_debug("rtasd: surveillance enabled\n"); - } - } - } - - schedule_delayed_work_on(cpu, &event_scan_work, - __round_jiffies_relative(event_scan_delay, cpu)); - - put_online_cpus(); -} - -static void start_event_scan(void) -{ - unsigned int err_type; - int rc; - - printk(KERN_DEBUG "RTAS daemon started\n"); - pr_debug("rtasd: will sleep for %d milliseconds\n", - (30000 / rtas_event_scan_rate)); - - /* See if we have any error stored in NVRAM */ - memset(logdata, 0, rtas_error_log_max); - rc = nvram_read_error_log(logdata, rtas_error_log_max, - &err_type, &error_log_cnt); - /* We can use rtas_log_buf now */ - logging_enabled = 1; - - if (!rc) { - if (err_type != ERR_FLAG_ALREADY_LOGGED) { - pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0); - } - } - - schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work, - event_scan_delay); -} - -static int __init rtas_init(void) -{ - struct proc_dir_entry *entry; - - if (!machine_is(pseries)) - return 0; - - /* No RTAS */ - event_scan = rtas_token("event-scan"); - if (event_scan == RTAS_UNKNOWN_SERVICE) { - printk(KERN_DEBUG "rtasd: no event-scan on system\n"); - return -ENODEV; - } - - rtas_event_scan_rate = rtas_token("rtas-event-scan-rate"); - if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n"); - return -ENODEV; - } - - /* Make room for the sequence number */ - rtas_error_log_max = rtas_get_error_log_max(); - rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); - - rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); - if (!rtas_log_buf) { - printk(KERN_ERR "rtasd: no memory\n"); - return -ENOMEM; - } - - entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL, - &proc_rtas_log_operations); - if (!entry) - printk(KERN_ERR "Failed to create error_log proc entry\n"); - - start_event_scan(); - - return 0; -} - -static int __init surveillance_setup(char *str) -{ - int i; - - if (get_option(&str,&i)) { - if (i >= 0 && i <= 255) - surveillance_timeout = i; - } - - return 1; -} - -static int __init rtasmsgs_setup(char *str) -{ - if (strcmp(str, "on") == 0) - full_rtas_msgs = 1; - else if (strcmp(str, "off") == 0) - full_rtas_msgs = 0; - - return 1; -} -__initcall(rtas_init); -__setup("surveillance=", surveillance_setup); -__setup("rtasmsgs=", rtasmsgs_setup);