From: Andy Lutomirski Date: Sun, 28 May 2017 17:00:15 +0000 (-0700) Subject: x86/mm: Rework lazy TLB to track the actual loaded mm X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3d28ebceaffab40f30afa87e33331560148d7b8b;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git x86/mm: Rework lazy TLB to track the actual loaded mm Lazy TLB state is currently managed in a rather baroque manner. AFAICT, there are three possible states: - Non-lazy. This means that we're running a user thread or a kernel thread that has called use_mm(). current->mm == current->active_mm == cpu_tlbstate.active_mm and cpu_tlbstate.state == TLBSTATE_OK. - Lazy with user mm. We're running a kernel thread without an mm and we're borrowing an mm_struct. We have current->mm == NULL, current->active_mm == cpu_tlbstate.active_mm, cpu_tlbstate.state != TLBSTATE_OK (i.e. TLBSTATE_LAZY or 0). The current cpu is set in mm_cpumask(current->active_mm). CR3 points to current->active_mm->pgd. The TLB is up to date. - Lazy with init_mm. This happens when we call leave_mm(). We have current->mm == NULL, current->active_mm == cpu_tlbstate.active_mm, but that mm is only relelvant insofar as the scheduler is tracking it for refcounting. cpu_tlbstate.state != TLBSTATE_OK. The current cpu is clear in mm_cpumask(current->active_mm). CR3 points to swapper_pg_dir, i.e. init_mm->pgd. This patch simplifies the situation. Other than perf, x86 stops caring about current->active_mm at all. We have cpu_tlbstate.loaded_mm pointing to the mm that CR3 references. The TLB is always up to date for that mm. leave_mm() just switches us to init_mm. There are no longer any special cases for mm_cpumask, and switch_mm() switches mms without worrying about laziness. After this patch, cpu_tlbstate.state serves only to tell the TLB flush code whether it may switch to init_mm instead of doing a normal flush. This makes fairly extensive changes to xen_exit_mmap(), which used to look a bit like black magic. Perf is unchanged. With or without this change, perf may behave a bit erratically if it tries to read user memory in kernel thread context. We should build on this patch to teach perf to never look at user memory when cpu_tlbstate.loaded_mm != current->mm. Signed-off-by: Andy Lutomirski Cc: Andrew Morton Cc: Arjan van de Ven Cc: Borislav Petkov Cc: Dave Hansen Cc: Linus Torvalds Cc: Mel Gorman Cc: Michal Hocko Cc: Nadav Amit Cc: Nadav Amit Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 580b60f5ac83..77a33096728d 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2101,8 +2101,7 @@ static int x86_pmu_event_init(struct perf_event *event) static void refresh_pce(void *ignored) { - if (current->active_mm) - load_mm_cr4(current->active_mm); + load_mm_cr4(this_cpu_read(cpu_tlbstate.loaded_mm)); } static void x86_pmu_event_mapped(struct perf_event *event) diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index dbb5a9f0fed8..388c2463fde6 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -66,7 +66,13 @@ static inline void invpcid_flush_all_nonglobals(void) #endif struct tlb_state { - struct mm_struct *active_mm; + /* + * cpu_tlbstate.loaded_mm should match CR3 whenever interrupts + * are on. This means that it may not match current->active_mm, + * which will contain the previous user mm when we're in lazy TLB + * mode even if we've already switched back to swapper_pg_dir. + */ + struct mm_struct *loaded_mm; int state; /* @@ -256,7 +262,9 @@ void native_flush_tlb_others(const struct cpumask *cpumask, static inline void reset_lazy_tlbstate(void) { this_cpu_write(cpu_tlbstate.state, 0); - this_cpu_write(cpu_tlbstate.active_mm, &init_mm); + this_cpu_write(cpu_tlbstate.loaded_mm, &init_mm); + + WARN_ON(read_cr3() != __pa_symbol(swapper_pg_dir)); } static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index d4a15831ac58..de503e7a64ad 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -22,14 +22,15 @@ #include /* context.lock is held for us, so we don't need any locking. */ -static void flush_ldt(void *current_mm) +static void flush_ldt(void *__mm) { + struct mm_struct *mm = __mm; mm_context_t *pc; - if (current->active_mm != current_mm) + if (this_cpu_read(cpu_tlbstate.loaded_mm) != mm) return; - pc = ¤t->active_mm->context; + pc = &mm->context; set_ldt(pc->ldt->entries, pc->ldt->size); } diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index c61183b57427..88ee942cb47d 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -811,7 +811,7 @@ void __init zone_sizes_init(void) } DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { - .active_mm = &init_mm, + .loaded_mm = &init_mm, .state = 0, .cr4 = ~0UL, /* fail hard if we screw up cr4 shadow initialization */ }; diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index da1416c77bfb..44db82013f1c 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -28,26 +28,25 @@ * Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi */ -/* - * We cannot call mmdrop() because we are in interrupt context, - * instead update mm->cpu_vm_mask. - */ void leave_mm(int cpu) { - struct mm_struct *active_mm = this_cpu_read(cpu_tlbstate.active_mm); + struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); + + /* + * It's plausible that we're in lazy TLB mode while our mm is init_mm. + * If so, our callers still expect us to flush the TLB, but there + * aren't any user TLB entries in init_mm to worry about. + * + * This needs to happen before any other sanity checks due to + * intel_idle's shenanigans. + */ + if (loaded_mm == &init_mm) + return; + if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) BUG(); - if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) { - cpumask_clear_cpu(cpu, mm_cpumask(active_mm)); - load_cr3(swapper_pg_dir); - /* - * This gets called in the idle path where RCU - * functions differently. Tracing normally - * uses RCU, so we have to call the tracepoint - * specially here. - */ - trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); - } + + switch_mm(NULL, &init_mm, NULL); } EXPORT_SYMBOL_GPL(leave_mm); @@ -65,108 +64,109 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { unsigned cpu = smp_processor_id(); + struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm); - if (likely(prev != next)) { - if (IS_ENABLED(CONFIG_VMAP_STACK)) { - /* - * If our current stack is in vmalloc space and isn't - * mapped in the new pgd, we'll double-fault. Forcibly - * map it. - */ - unsigned int stack_pgd_index = pgd_index(current_stack_pointer()); - - pgd_t *pgd = next->pgd + stack_pgd_index; + /* + * NB: The scheduler will call us with prev == next when + * switching from lazy TLB mode to normal mode if active_mm + * isn't changing. When this happens, there is no guarantee + * that CR3 (and hence cpu_tlbstate.loaded_mm) matches next. + * + * NB: leave_mm() calls us with prev == NULL and tsk == NULL. + */ - if (unlikely(pgd_none(*pgd))) - set_pgd(pgd, init_mm.pgd[stack_pgd_index]); - } - - this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); - this_cpu_write(cpu_tlbstate.active_mm, next); + this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); - cpumask_set_cpu(cpu, mm_cpumask(next)); + if (real_prev == next) { + /* + * There's nothing to do: we always keep the per-mm control + * regs in sync with cpu_tlbstate.loaded_mm. Just + * sanity-check mm_cpumask. + */ + if (WARN_ON_ONCE(!cpumask_test_cpu(cpu, mm_cpumask(next)))) + cpumask_set_cpu(cpu, mm_cpumask(next)); + return; + } + if (IS_ENABLED(CONFIG_VMAP_STACK)) { /* - * Re-load page tables. - * - * This logic has an ordering constraint: - * - * CPU 0: Write to a PTE for 'next' - * CPU 0: load bit 1 in mm_cpumask. if nonzero, send IPI. - * CPU 1: set bit 1 in next's mm_cpumask - * CPU 1: load from the PTE that CPU 0 writes (implicit) - * - * We need to prevent an outcome in which CPU 1 observes - * the new PTE value and CPU 0 observes bit 1 clear in - * mm_cpumask. (If that occurs, then the IPI will never - * be sent, and CPU 0's TLB will contain a stale entry.) - * - * The bad outcome can occur if either CPU's load is - * reordered before that CPU's store, so both CPUs must - * execute full barriers to prevent this from happening. - * - * Thus, switch_mm needs a full barrier between the - * store to mm_cpumask and any operation that could load - * from next->pgd. TLB fills are special and can happen - * due to instruction fetches or for no reason at all, - * and neither LOCK nor MFENCE orders them. - * Fortunately, load_cr3() is serializing and gives the - * ordering guarantee we need. - * + * If our current stack is in vmalloc space and isn't + * mapped in the new pgd, we'll double-fault. Forcibly + * map it. */ - load_cr3(next->pgd); + unsigned int stack_pgd_index = pgd_index(current_stack_pointer()); - trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); + pgd_t *pgd = next->pgd + stack_pgd_index; - /* Stop flush ipis for the previous mm */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); + if (unlikely(pgd_none(*pgd))) + set_pgd(pgd, init_mm.pgd[stack_pgd_index]); + } - /* Load per-mm CR4 state */ - load_mm_cr4(next); + this_cpu_write(cpu_tlbstate.loaded_mm, next); + + WARN_ON_ONCE(cpumask_test_cpu(cpu, mm_cpumask(next))); + cpumask_set_cpu(cpu, mm_cpumask(next)); + + /* + * Re-load page tables. + * + * This logic has an ordering constraint: + * + * CPU 0: Write to a PTE for 'next' + * CPU 0: load bit 1 in mm_cpumask. if nonzero, send IPI. + * CPU 1: set bit 1 in next's mm_cpumask + * CPU 1: load from the PTE that CPU 0 writes (implicit) + * + * We need to prevent an outcome in which CPU 1 observes + * the new PTE value and CPU 0 observes bit 1 clear in + * mm_cpumask. (If that occurs, then the IPI will never + * be sent, and CPU 0's TLB will contain a stale entry.) + * + * The bad outcome can occur if either CPU's load is + * reordered before that CPU's store, so both CPUs must + * execute full barriers to prevent this from happening. + * + * Thus, switch_mm needs a full barrier between the + * store to mm_cpumask and any operation that could load + * from next->pgd. TLB fills are special and can happen + * due to instruction fetches or for no reason at all, + * and neither LOCK nor MFENCE orders them. + * Fortunately, load_cr3() is serializing and gives the + * ordering guarantee we need. + */ + load_cr3(next->pgd); + + /* + * This gets called via leave_mm() in the idle path where RCU + * functions differently. Tracing normally uses RCU, so we have to + * call the tracepoint specially here. + */ + trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); + + /* Stop flush ipis for the previous mm */ + WARN_ON_ONCE(!cpumask_test_cpu(cpu, mm_cpumask(real_prev)) && + real_prev != &init_mm); + cpumask_clear_cpu(cpu, mm_cpumask(real_prev)); + + /* Load per-mm CR4 state */ + load_mm_cr4(next); #ifdef CONFIG_MODIFY_LDT_SYSCALL - /* - * Load the LDT, if the LDT is different. - * - * It's possible that prev->context.ldt doesn't match - * the LDT register. This can happen if leave_mm(prev) - * was called and then modify_ldt changed - * prev->context.ldt but suppressed an IPI to this CPU. - * In this case, prev->context.ldt != NULL, because we - * never set context.ldt to NULL while the mm still - * exists. That means that next->context.ldt != - * prev->context.ldt, because mms never share an LDT. - */ - if (unlikely(prev->context.ldt != next->context.ldt)) - load_mm_ldt(next); + /* + * Load the LDT, if the LDT is different. + * + * It's possible that prev->context.ldt doesn't match + * the LDT register. This can happen if leave_mm(prev) + * was called and then modify_ldt changed + * prev->context.ldt but suppressed an IPI to this CPU. + * In this case, prev->context.ldt != NULL, because we + * never set context.ldt to NULL while the mm still + * exists. That means that next->context.ldt != + * prev->context.ldt, because mms never share an LDT. + */ + if (unlikely(real_prev->context.ldt != next->context.ldt)) + load_mm_ldt(next); #endif - } else { - this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); - BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next); - - if (!cpumask_test_cpu(cpu, mm_cpumask(next))) { - /* - * On established mms, the mm_cpumask is only changed - * from irq context, from ptep_clear_flush() while in - * lazy tlb mode, and here. Irqs are blocked during - * schedule, protecting us from simultaneous changes. - */ - cpumask_set_cpu(cpu, mm_cpumask(next)); - - /* - * We were in lazy tlb mode and leave_mm disabled - * tlb flush IPI delivery. We must reload CR3 - * to make sure to use no freed page tables. - * - * As above, load_cr3() is serializing and orders TLB - * fills with respect to the mm_cpumask write. - */ - load_cr3(next->pgd); - trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); - load_mm_cr4(next); - load_mm_ldt(next); - } - } } /* @@ -246,7 +246,7 @@ static void flush_tlb_func_remote(void *info) inc_irq_stat(irq_tlb_count); - if (f->mm && f->mm != this_cpu_read(cpu_tlbstate.active_mm)) + if (f->mm && f->mm != this_cpu_read(cpu_tlbstate.loaded_mm)) return; count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); @@ -314,7 +314,7 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, info.end = TLB_FLUSH_ALL; } - if (mm == current->active_mm) + if (mm == this_cpu_read(cpu_tlbstate.loaded_mm)) flush_tlb_func_local(&info, TLB_LOCAL_MM_SHOOTDOWN); if (cpumask_any_but(mm_cpumask(mm), cpu) < nr_cpu_ids) flush_tlb_others(mm_cpumask(mm), &info); diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 4b926c6b813c..21beb37114b7 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -975,37 +975,32 @@ static void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } - -#ifdef CONFIG_SMP -/* Another cpu may still have their %cr3 pointing at the pagetable, so - we need to repoint it somewhere else before we can unpin it. */ -static void drop_other_mm_ref(void *info) +static void drop_mm_ref_this_cpu(void *info) { struct mm_struct *mm = info; - struct mm_struct *active_mm; - - active_mm = this_cpu_read(cpu_tlbstate.active_mm); - if (active_mm == mm && this_cpu_read(cpu_tlbstate.state) != TLBSTATE_OK) + if (this_cpu_read(cpu_tlbstate.loaded_mm) == mm) leave_mm(smp_processor_id()); - /* If this cpu still has a stale cr3 reference, then make sure - it has been flushed. */ + /* + * If this cpu still has a stale cr3 reference, then make sure + * it has been flushed. + */ if (this_cpu_read(xen_current_cr3) == __pa(mm->pgd)) - load_cr3(swapper_pg_dir); + xen_mc_flush(); } +#ifdef CONFIG_SMP +/* + * Another cpu may still have their %cr3 pointing at the pagetable, so + * we need to repoint it somewhere else before we can unpin it. + */ static void xen_drop_mm_ref(struct mm_struct *mm) { cpumask_var_t mask; unsigned cpu; - if (current->active_mm == mm) { - if (current->mm == mm) - load_cr3(swapper_pg_dir); - else - leave_mm(smp_processor_id()); - } + drop_mm_ref_this_cpu(mm); /* Get the "official" set of cpus referring to our pagetable. */ if (!alloc_cpumask_var(&mask, GFP_ATOMIC)) { @@ -1013,31 +1008,31 @@ static void xen_drop_mm_ref(struct mm_struct *mm) if (!cpumask_test_cpu(cpu, mm_cpumask(mm)) && per_cpu(xen_current_cr3, cpu) != __pa(mm->pgd)) continue; - smp_call_function_single(cpu, drop_other_mm_ref, mm, 1); + smp_call_function_single(cpu, drop_mm_ref_this_cpu, mm, 1); } return; } cpumask_copy(mask, mm_cpumask(mm)); - /* It's possible that a vcpu may have a stale reference to our - cr3, because its in lazy mode, and it hasn't yet flushed - its set of pending hypercalls yet. In this case, we can - look at its actual current cr3 value, and force it to flush - if needed. */ + /* + * It's possible that a vcpu may have a stale reference to our + * cr3, because its in lazy mode, and it hasn't yet flushed + * its set of pending hypercalls yet. In this case, we can + * look at its actual current cr3 value, and force it to flush + * if needed. + */ for_each_online_cpu(cpu) { if (per_cpu(xen_current_cr3, cpu) == __pa(mm->pgd)) cpumask_set_cpu(cpu, mask); } - if (!cpumask_empty(mask)) - smp_call_function_many(mask, drop_other_mm_ref, mm, 1); + smp_call_function_many(mask, drop_mm_ref_this_cpu, mm, 1); free_cpumask_var(mask); } #else static void xen_drop_mm_ref(struct mm_struct *mm) { - if (current->active_mm == mm) - load_cr3(swapper_pg_dir); + drop_mm_ref_this_cpu(mm); } #endif