From: Milton Miller Date: Fri, 19 Feb 2010 17:44:42 +0000 (+0000) Subject: ixgbe: prevent speculative processing of descriptors before ready X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3c945e5b3719bcc18c6ddd31bbcae8ef94f3d19a;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git ixgbe: prevent speculative processing of descriptors before ready The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. Signed-off-by: Milton Miller Signed-off-by: Anton Blanchard Acked-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 43a8de3dc4d6..330879004ea1 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -849,6 +849,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc)); len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>