From: Ariel Elior Date: Mon, 11 Mar 2013 05:17:46 +0000 (+0000) Subject: bnx2x: Control number of vfs dynamically X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3c76feff68559bf9ec08d4d86abe57bc56a9847a;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git bnx2x: Control number of vfs dynamically 1. Support sysfs interface for getting the maximal number of virtual functions of a given physical function. 2. Support sysfs interface for getting and setting the current number of virtual functions. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d62d037b2928..33fbdfdc8e12 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1281,6 +1281,8 @@ struct bnx2x { dma_addr_t pf2vf_bulletin_mapping; struct pf_vf_bulletin_content old_bulletin; + + u16 requested_nr_virtfn; #endif /* CONFIG_BNX2X_SRIOV */ struct net_device *dev; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 9be9b0373ca9..f685d2e77fcb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9546,8 +9546,10 @@ sp_rtnl_not_reset: /* enable SR-IOV if applicable */ if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, - &bp->sp_rtnl_state)) + &bp->sp_rtnl_state)) { + bnx2x_disable_sriov(bp); bnx2x_enable_sriov(bp); + } } static void bnx2x_period_task(struct work_struct *work) @@ -11423,26 +11425,6 @@ static int bnx2x_init_bp(struct bnx2x *bp) * net_device service functions */ -static int bnx2x_open_epilog(struct bnx2x *bp) -{ - /* Enable sriov via delayed work. This must be done via delayed work - * because it causes the probe of the vf devices to be run, which invoke - * register_netdevice which must have rtnl lock taken. As we are holding - * the lock right now, that could only work if the probe would not take - * the lock. However, as the probe of the vf may be called from other - * contexts as well (such as passthrough to vm failes) it can't assume - * the lock is being held for it. Using delayed work here allows the - * probe code to simply take the lock (i.e. wait for it to be released - * if it is being held). - */ - smp_mb__before_clear_bit(); - set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state); - smp_mb__after_clear_bit(); - schedule_delayed_work(&bp->sp_rtnl_task, 0); - - return 0; -} - /* called with rtnl_lock */ static int bnx2x_open(struct net_device *dev) { @@ -12498,13 +12480,8 @@ static int bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } - /* Enable SRIOV if capability found in configuration space. - * Once the generic SR-IOV framework makes it in from the - * pci tree this will be revised, to allow dynamic control - * over the number of VFs. Right now, change the num of vfs - * param below to enable SR-IOV. - */ - rc = bnx2x_iov_init_one(bp, int_mode, 0/*num vfs*/); + /* Enable SRIOV if capability found in configuration space */ + rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS); if (rc) goto init_one_exit; @@ -12820,6 +12797,9 @@ static struct pci_driver bnx2x_pci_driver = { .suspend = bnx2x_suspend, .resume = bnx2x_resume, .err_handler = &bnx2x_err_handler, +#ifdef CONFIG_BNX2X_SRIOV + .sriov_configure = bnx2x_sriov_configure, +#endif }; static int __init bnx2x_init(void) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 7b234e41fea8..df930e30e1b1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1467,7 +1467,6 @@ static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid) return bnx2x_is_pcie_pending(dev); unknown_dev: - BNX2X_ERR("Unknown device\n"); return false; } @@ -1972,8 +1971,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, if (iov->total == 0) goto failed; - /* calculate the actual number of VFs */ - iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param); + iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param); + + DP(BNX2X_MSG_IOV, "num_vfs_param was %d, nr_virtfn was %d\n", + num_vfs_param, iov->nr_virtfn); /* allocate the vf array */ bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) * @@ -3020,21 +3021,47 @@ void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, vf->op_current = CHANNEL_TLV_NONE; } -void bnx2x_enable_sriov(struct bnx2x *bp) +int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs_param) { - int rc = 0; - /* disbale sriov in case it is still enabled */ - pci_disable_sriov(bp->pdev); - DP(BNX2X_MSG_IOV, "sriov disabled\n"); + struct bnx2x *bp = netdev_priv(pci_get_drvdata(dev)); - /* enable sriov */ - DP(BNX2X_MSG_IOV, "vf num (%d)\n", (bp->vfdb->sriov.nr_virtfn)); - rc = pci_enable_sriov(bp->pdev, (bp->vfdb->sriov.nr_virtfn)); - if (rc) + DP(BNX2X_MSG_IOV, "bnx2x_sriov_configure called with %d, BNX2X_NR_VIRTFN(bp) was %d\n", + num_vfs_param, BNX2X_NR_VIRTFN(bp)); + + /* HW channel is only operational when PF is up */ + if (bp->state != BNX2X_STATE_OPEN) { + BNX2X_ERR("VF num configurtion via sysfs not supported while PF is down"); + return -EINVAL; + } + + /* we are always bound by the total_vfs in the configuration space */ + if (num_vfs_param > BNX2X_NR_VIRTFN(bp)) { + BNX2X_ERR("truncating requested number of VFs (%d) down to maximum allowed (%d)\n", + num_vfs_param, BNX2X_NR_VIRTFN(bp)); + num_vfs_param = BNX2X_NR_VIRTFN(bp); + } + + bp->requested_nr_virtfn = num_vfs_param; + if (num_vfs_param == 0) { + pci_disable_sriov(dev); + return 0; + } else { + return bnx2x_enable_sriov(bp); + } +} + +int bnx2x_enable_sriov(struct bnx2x *bp) +{ + int rc = 0, req_vfs = bp->requested_nr_virtfn; + + rc = pci_enable_sriov(bp->pdev, req_vfs); + if (rc) { BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); - else - DP(BNX2X_MSG_IOV, "sriov enabled\n"); + return rc; + } + DP(BNX2X_MSG_IOV, "sriov enabled (%d vfs)\n", req_vfs); + return req_vfs; } void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) @@ -3050,6 +3077,11 @@ void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) } } +void bnx2x_disable_sriov(struct bnx2x *bp) +{ + pci_disable_sriov(bp->pdev); +} + static int bnx2x_vf_ndo_sanity(struct bnx2x *bp, int vfidx, struct bnx2x_virtf *vf) { @@ -3087,6 +3119,10 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx, rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf); if (rc) return rc; + if (!mac_obj || !vlan_obj || !bulletin) { + BNX2X_ERR("VF partially initialized\n"); + return -EINVAL; + } ivi->vf = vfidx; ivi->qos = 0; @@ -3405,3 +3441,26 @@ alloc_mem_err: sizeof(union pf_vf_bulletin)); return -ENOMEM; } + +int bnx2x_open_epilog(struct bnx2x *bp) +{ + /* Enable sriov via delayed work. This must be done via delayed work + * because it causes the probe of the vf devices to be run, which invoke + * register_netdevice which must have rtnl lock taken. As we are holding + * the lock right now, that could only work if the probe would not take + * the lock. However, as the probe of the vf may be called from other + * contexts as well (such as passthrough to vm failes) it can't assume + * the lock is being held for it. Using delayed work here allows the + * probe code to simply take the lock (i.e. wait for it to be released + * if it is being held). We only want to do this if the number of VFs + * was set before PF driver was loaded. + */ + if (IS_SRIOV(bp) && BNX2X_NR_VIRTFN(bp)) { + smp_mb__before_clear_bit(); + set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state); + smp_mb__after_clear_bit(); + schedule_delayed_work(&bp->sp_rtnl_task, 0); + } + + return 0; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 33d49516fcea..a10bdb2fd900 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -753,12 +753,15 @@ static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); void bnx2x_vf_map_doorbells(struct bnx2x *bp); int bnx2x_vf_pci_alloc(struct bnx2x *bp); -void bnx2x_enable_sriov(struct bnx2x *bp); +int bnx2x_enable_sriov(struct bnx2x *bp); +void bnx2x_disable_sriov(struct bnx2x *bp); static inline int bnx2x_vf_headroom(struct bnx2x *bp) { return bp->vfdb->sriov.nr_virtfn * BNX2X_CLIENTS_PER_VF; } void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp); +int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs); +int bnx2x_open_epilog(struct bnx2x *bp); #else /* CONFIG_BNX2X_SRIOV */ @@ -781,7 +784,8 @@ static inline void bnx2x_iov_init_dmae(struct bnx2x *bp) {} static inline int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param) {return 0; } static inline void bnx2x_iov_remove_one(struct bnx2x *bp) {} -static inline void bnx2x_enable_sriov(struct bnx2x *bp) {} +static inline int bnx2x_enable_sriov(struct bnx2x *bp) {return 0; } +static inline void bnx2x_disable_sriov(struct bnx2x *bp) {} static inline int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) {return 0; } static inline int bnx2x_vfpf_release(struct bnx2x *bp) {return 0; } @@ -807,6 +811,8 @@ static inline enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp static inline int bnx2x_vf_map_doorbells(struct bnx2x *bp) {return 0; } static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; } static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {} +static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; } +static inline int bnx2x_open_epilog(struct bnx2x *bp) {return 0; } #endif /* CONFIG_BNX2X_SRIOV */ #endif /* bnx2x_sriov.h */