From: Bruce Allan Date: Fri, 20 Nov 2009 23:25:07 +0000 (+0000) Subject: e1000e: consolidate two dbug macros into one simpler one X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3bb99fe226ead584a4db674dab546689f705201f;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git e1000e: consolidate two dbug macros into one simpler one This patch depends on a previous one that cleans up redundant #includes. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 407637f6c331..680b7c703062 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -309,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) * indicates that the bootagent or EFI code has * improperly left this bit enabled */ - hw_dbg(hw, "Please update your 82571 Bootagent\n"); + e_dbg("Please update your 82571 Bootagent\n"); } ew32(SWSM, swsm & ~E1000_SWSM_SMBI); } @@ -483,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) } if (i == sw_timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); hw->dev_spec.e82571.smb_counter++; } /* Get the FW semaphore. */ @@ -501,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) if (i == fw_timeout) { /* Release semaphores */ e1000_put_hw_semaphore_82571(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -708,7 +708,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -749,7 +749,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -848,9 +848,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -889,7 +889,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ctrl = er32(CTRL); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); if (hw->nvm.type == e1000_nvm_flash_hw) { @@ -955,12 +955,12 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + e_dbg("Initializing the IEEE VLAN\n"); e1000e_clear_vfta(hw); /* Setup the receive address. */ @@ -974,7 +974,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e1000e_init_rx_addrs(hw, rar_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -1383,7 +1383,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) */ mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "AN_UP -> AN_PROG\n"); + e_dbg("AN_UP -> AN_PROG\n"); } break; @@ -1401,7 +1401,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "FORCED_UP -> AN_PROG\n"); + e_dbg("FORCED_UP -> AN_PROG\n"); } break; @@ -1415,7 +1415,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) if (status & E1000_STATUS_LU) { mac->serdes_link_state = e1000_serdes_link_autoneg_complete; - hw_dbg(hw, "AN_PROG -> AN_UP\n"); + e_dbg("AN_PROG -> AN_UP\n"); } else { /* * Disable autoneg, force link up and @@ -1430,12 +1430,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error config flow control\n"); + e_dbg("Error config flow control\n"); break; } mac->serdes_link_state = e1000_serdes_link_forced_up; - hw_dbg(hw, "AN_PROG -> FORCED_UP\n"); + e_dbg("AN_PROG -> FORCED_UP\n"); } mac->serdes_has_link = true; break; @@ -1450,14 +1450,14 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "DOWN -> AN_PROG\n"); + e_dbg("DOWN -> AN_PROG\n"); break; } } else { if (!(rxcw & E1000_RXCW_SYNCH)) { mac->serdes_has_link = false; mac->serdes_link_state = e1000_serdes_link_down; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } else { /* * We have sync, and can tolerate one @@ -1469,7 +1469,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) if (rxcw & E1000_RXCW_IV) { mac->serdes_link_state = e1000_serdes_link_down; mac->serdes_has_link = false; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } } } @@ -1491,7 +1491,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index ac5d8552747b..dac00a023835 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -48,9 +48,9 @@ struct e1000_info; #ifdef DEBUG #define e_dbg(format, arg...) \ - e_printk(KERN_DEBUG , adapter, format, ## arg) + e_printk(KERN_DEBUG , hw->adapter, format, ## arg) #else -#define e_dbg(format, arg...) do { (void)(adapter); } while (0) +#define e_dbg(format, arg...) do { (void)(hw); } while (0) #endif #define e_err(format, arg...) \ diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 6fd46f5f8a3c..f5601c5ff7af 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -394,8 +394,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) } if (i == timeout) { - hw_dbg(hw, - "Driver can't access resource, SW_FW_SYNC timeout.\n"); + e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); return -E1000_ERR_SWFW_SYNC; } @@ -597,7 +596,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -630,7 +629,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data); + e_dbg("GG82563 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -648,7 +647,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) udelay(1); if (hw->phy.autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link " + e_dbg("Waiting for forced speed/duplex link " "on GG82563 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -771,9 +770,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -785,7 +784,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); ret_val = e1000_acquire_phy_80003es2lan(hw); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); e1000_release_phy_80003es2lan(hw); @@ -820,19 +819,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + e_dbg("Initializing the IEEE VLAN\n"); e1000e_clear_vfta(hw); /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -989,7 +988,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) /* SW Reset the PHY so all changes take effect */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error Resetting the PHY\n"); + e_dbg("Error Resetting the PHY\n"); return ret_val; } diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index aaea41ef794d..44808b053fcc 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -925,15 +925,4 @@ struct e1000_hw { } dev_spec; }; -#ifdef DEBUG -#define hw_dbg(hw, format, arg...) \ - printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg) -#else -static inline int __attribute__ ((format (printf, 2, 3))) -hw_dbg(struct e1000_hw *hw, const char *format, ...) -{ - return 0; -} -#endif - #endif diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index bef5e3333f2a..101a2714467e 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -368,7 +368,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Can't read flash registers if the register set isn't mapped. */ if (!hw->flash_address) { - hw_dbg(hw, "ERROR: Flash registers not mapped\n"); + e_dbg("ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG; } @@ -550,7 +550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); out: return ret_val; @@ -644,7 +644,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n"); + e_dbg("SW/FW/HW has locked the resource for too long.\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -664,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Failed to acquire the semaphore.\n"); + e_dbg("Failed to acquire the semaphore.\n"); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); ret_val = -E1000_ERR_CONFIG; @@ -773,12 +773,12 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IFE PMC: %X\n", data); + e_dbg("IFE PMC: %X\n", data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -788,7 +788,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1203,7 +1203,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) * leave the PHY in a bad state possibly resulting in no link. */ if (loop == 0) - hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n"); + e_dbg("LAN_INIT_DONE not set, increase timeout\n"); /* Clear the Init Done bit for the next init event */ data = er32(STATUS); @@ -1274,7 +1274,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1604,7 +1604,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "Unable to determine valid NVM bank via EEC - " + e_dbg("Unable to determine valid NVM bank via EEC - " "reading flash signature\n"); /* fall-thru */ default: @@ -1634,7 +1634,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "ERROR: No valid NVM bank present\n"); + e_dbg("ERROR: No valid NVM bank present\n"); return -E1000_ERR_NVM; } @@ -1662,7 +1662,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1671,7 +1671,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -1697,7 +1697,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, out: if (ret_val) - hw_dbg(hw, "NVM read error: %d\n", ret_val); + e_dbg("NVM read error: %d\n", ret_val); return ret_val; } @@ -1719,7 +1719,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Check if the flash descriptor is valid */ if (hsfsts.hsf_status.fldesvalid == 0) { - hw_dbg(hw, "Flash descriptor invalid. " + e_dbg("Flash descriptor invalid. " "SW Sequencing must be used."); return -E1000_ERR_NVM; } @@ -1769,7 +1769,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flcdone = 1; ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { - hw_dbg(hw, "Flash controller busy, cannot get access"); + e_dbg("Flash controller busy, cannot get access"); } } @@ -1919,7 +1919,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; } else if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -1947,7 +1947,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -1998,7 +1998,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -2072,7 +2072,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ - hw_dbg(hw, "Flash commit failed.\n"); + e_dbg("Flash commit failed.\n"); nvm->ops.release_nvm(hw); goto out; } @@ -2128,7 +2128,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) out: if (ret_val) - hw_dbg(hw, "NVM update error: %d\n", ret_val); + e_dbg("NVM update error: %d\n", ret_val); return ret_val; } @@ -2278,7 +2278,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -2323,7 +2323,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, return ret_val; for (program_retries = 0; program_retries < 100; program_retries++) { - hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset); + e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); udelay(100); ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); if (!ret_val) @@ -2458,7 +2458,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -2588,10 +2588,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) { - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); } - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); /* @@ -2643,7 +2643,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) } ret_val = e1000_acquire_swflag_ich8lan(hw); /* Whether or not the swflag was acquired, we need to reset the part */ - hw_dbg(hw, "Issuing a global reset to ich8lan\n"); + e_dbg("Issuing a global reset to ich8lan\n"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); @@ -2663,7 +2663,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + e_dbg("Auto Read Done did not complete\n"); } } /* Dummy read to clear the phy wakeup bit after lcd reset */ @@ -2725,7 +2725,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } @@ -2733,7 +2733,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -2879,7 +2879,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Continue to configure the copper link. */ @@ -3094,7 +3094,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; if (hw->mac.type != e1000_ich8lan) { - hw_dbg(hw, "Workaround applies to ICH8 only.\n"); + e_dbg("Workaround applies to ICH8 only.\n"); return; } @@ -3372,8 +3372,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) if (status & E1000_STATUS_PHYRA) ew32(STATUS, status & ~E1000_STATUS_PHYRA); else - hw_dbg(hw, - "PHY Reset Asserted not set - needs delay\n"); + e_dbg("PHY Reset Asserted not set - needs delay\n"); } e1000e_get_cfg_done(hw); @@ -3388,7 +3387,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) } else { if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { /* Maybe we should do a basic PHY config */ - hw_dbg(hw, "EEPROM not present\n"); + e_dbg("EEPROM not present\n"); return -E1000_ERR_CONFIG; } } diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 5a670a2230e7..fa31c51e5642 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -110,12 +110,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) u32 i; /* Setup the receive address */ - hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + e_dbg("Programming MAC Address into RAR[0]\n"); e1000e_rar_set(hw, hw->mac.addr, 0); /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + e_dbg("Clearing RAR[1-%u]\n", rar_count-1); for (i = 1; i < rar_count; i++) { E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); e1e_flush(); @@ -271,7 +271,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, for (; mc_addr_count > 0; mc_addr_count--) { u32 hash_value, hash_reg, hash_bit, mta; hash_value = e1000_hash_mc_addr(hw, mc_addr_list); - hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + e_dbg("Hash value = 0x%03X\n", hash_value); hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); hash_bit = hash_value & 0x1F; mta = (1 << hash_bit); @@ -403,7 +403,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); } return ret_val; @@ -443,7 +443,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -456,7 +456,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -466,7 +466,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -508,7 +508,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -521,7 +521,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -531,7 +531,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -548,11 +548,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - forced.\n"); + e_dbg("SERDES: Link up - forced.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - force failed.\n"); + e_dbg("SERDES: Link down - force failed.\n"); } } @@ -565,20 +565,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - autoneg " + e_dbg("SERDES: Link up - autoneg " "completed sucessfully.\n"); } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - invalid" + e_dbg("SERDES: Link down - invalid" "codewords detected in autoneg.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - no sync.\n"); + e_dbg("SERDES: Link down - no sync.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - autoneg failed\n"); + e_dbg("SERDES: Link down - autoneg failed\n"); } } @@ -609,7 +609,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -662,7 +662,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Call the necessary media_type subroutine to configure the link. */ @@ -676,7 +676,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) * control is disabled, because it does not hurt anything to * initialize these registers. */ - hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n"); + e_dbg("Initializing the Flow Control address, type and timer regs\n"); ew32(FCT, FLOW_CONTROL_TYPE); ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); @@ -746,7 +746,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; break; } @@ -784,7 +784,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) break; } if (i == FIBER_LINK_UP_LIMIT) { - hw_dbg(hw, "Never got a valid link from auto-neg!!!\n"); + e_dbg("Never got a valid link from auto-neg!!!\n"); mac->autoneg_failed = 1; /* * AutoNeg failed to achieve a link, so we'll call @@ -794,13 +794,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) */ ret_val = mac->ops.check_for_link(hw); if (ret_val) { - hw_dbg(hw, "Error while checking for link\n"); + e_dbg("Error while checking for link\n"); return ret_val; } mac->autoneg_failed = 0; } else { mac->autoneg_failed = 0; - hw_dbg(hw, "Valid Link Found\n"); + e_dbg("Valid Link Found\n"); } return 0; @@ -836,7 +836,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) * then the link-up status bit will be set and the flow control enable * bits (RFCE and TFCE) will be set according to their negotiated value. */ - hw_dbg(hw, "Auto-negotiation enabled\n"); + e_dbg("Auto-negotiation enabled\n"); ew32(CTRL, ctrl); e1e_flush(); @@ -851,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) (er32(CTRL) & E1000_CTRL_SWDPIN1)) { ret_val = e1000_poll_fiber_serdes_link_generic(hw); } else { - hw_dbg(hw, "No signal detected\n"); + e_dbg("No signal detected\n"); } return 0; @@ -947,7 +947,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode); + e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); switch (hw->fc.current_mode) { case e1000_fc_none: @@ -965,7 +965,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } @@ -1006,7 +1006,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } @@ -1030,7 +1030,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg(hw, "Copper PHY and Auto Neg " + e_dbg("Copper PHY and Auto Neg " "has not completed.\n"); return ret_val; } @@ -1095,10 +1095,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - hw_dbg(hw, "Flow Control = FULL.\r\n"); + e_dbg("Flow Control = FULL.\r\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = " + e_dbg("Flow Control = " "RX PAUSE frames only.\r\n"); } } @@ -1116,7 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); } /* * For transmitting PAUSE frames ONLY. @@ -1132,14 +1132,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); } else { /* * Per the IEEE spec, at this point flow control * should be disabled. */ hw->fc.current_mode = e1000_fc_none; - hw_dbg(hw, "Flow Control = NONE.\r\n"); + e_dbg("Flow Control = NONE.\r\n"); } /* @@ -1149,7 +1149,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); if (ret_val) { - hw_dbg(hw, "Error getting link speed and duplex\n"); + e_dbg("Error getting link speed and duplex\n"); return ret_val; } @@ -1162,7 +1162,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = e1000e_force_mac_fc(hw); if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } } @@ -1186,21 +1186,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; - hw_dbg(hw, "1000 Mbs, "); + e_dbg("1000 Mbs, "); } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; - hw_dbg(hw, "100 Mbs, "); + e_dbg("100 Mbs, "); } else { *speed = SPEED_10; - hw_dbg(hw, "10 Mbs, "); + e_dbg("10 Mbs, "); } if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } else { *duplex = HALF_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } return 0; @@ -1246,7 +1246,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) } if (i == timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); return -E1000_ERR_NVM; } @@ -1265,7 +1265,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) if (i == timeout) { /* Release semaphores */ e1000e_put_hw_semaphore(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -1305,7 +1305,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) } if (i == AUTO_READ_DONE_TIMEOUT) { - hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + e_dbg("Auto read by HW from NVM has not completed.\n"); return -E1000_ERR_RESET; } @@ -1326,7 +1326,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -1580,7 +1580,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Master requests are pending.\n"); + e_dbg("Master requests are pending.\n"); return -E1000_ERR_MASTER_REQUESTS_PENDING; } @@ -1804,7 +1804,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw) if (!timeout) { eecd &= ~E1000_EECD_REQ; ew32(EECD, eecd); - hw_dbg(hw, "Could not acquire NVM grant\n"); + e_dbg("Could not acquire NVM grant\n"); return -E1000_ERR_NVM; } @@ -1909,7 +1909,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SPI NVM Status error\n"); + e_dbg("SPI NVM Status error\n"); return -E1000_ERR_NVM; } } @@ -1938,7 +1938,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -1981,7 +1981,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -2061,7 +2061,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, &mac_addr_offset); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (mac_addr_offset == 0xFFFF) @@ -2076,7 +2076,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, mac_addr_offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (nvm_data & 0x0001) @@ -2091,7 +2091,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) offset = mac_addr_offset + (i >> 1); ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); @@ -2124,14 +2124,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { - hw_dbg(hw, "NVM Checksum Invalid\n"); + e_dbg("NVM Checksum Invalid\n"); return -E1000_ERR_NVM; } @@ -2155,7 +2155,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + e_dbg("NVM Read Error while updating checksum.\n"); return ret_val; } checksum += nvm_data; @@ -2163,7 +2163,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) checksum = (u16) NVM_SUM - checksum; ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) - hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + e_dbg("NVM Write Error while updating checksum.\n"); return ret_val; } @@ -2226,7 +2226,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) /* Check that the host interface is enabled. */ hicr = er32(HICR); if ((hicr & E1000_HICR_EN) == 0) { - hw_dbg(hw, "E1000_HOST_EN bit disabled.\n"); + e_dbg("E1000_HOST_EN bit disabled.\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } /* check the previous command is completed */ @@ -2238,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - hw_dbg(hw, "Previous command timeout failed .\n"); + e_dbg("Previous command timeout failed .\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } @@ -2509,14 +2509,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num) ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num = (u32)(nvm_data << 16); ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num |= nvm_data; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index ff9f9f1725e3..0b5352307f16 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_pchlan] = &e1000_pch_info, }; -#ifdef DEBUG -/** - * e1000_get_hw_dev_name - return device name string - * used by hardware layer to print debugging information - **/ -char *e1000e_get_hw_dev_name(struct e1000_hw *hw) -{ - return hw->adapter->netdev->name; -} -#endif - /** * e1000_desc_unused - calculate if we have unused descriptors **/ @@ -415,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_rx_desc *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; @@ -464,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - e_dbg("%s: Receive packet consumed multiple buffers\n", - netdev->name); + e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -682,6 +671,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, int work_to_do) { + struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -725,8 +715,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - e_dbg("%s: Packet Split buffers didn't pick up the " - "full packet\n", netdev->name); + e_dbg("Packet Split buffers didn't pick up the full " + "packet\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -739,8 +729,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - e_dbg("%s: Last part of the packet spanning multiple " - "descriptors\n", netdev->name); + e_dbg("Last part of the packet spanning multiple " + "descriptors\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -2931,7 +2921,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - e_dbg("%s: icr is %08X\n", netdev->name, icr); + e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; wmb(); @@ -3001,7 +2991,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) goto msi_test_failed; /* okay so the test worked, restore settings */ - e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); + e_dbg("MSI interrupt test succeeded!\n"); msi_test_failed: e1000e_set_interrupt_capability(adapter); e1000_request_irq(adapter); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 95a8196cf44c..cff1df204031 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -212,7 +212,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -239,11 +239,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + e_dbg("MDI Read did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } *data = (u16) mdic; @@ -265,7 +265,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -293,11 +293,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + e_dbg("MDI Write did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } @@ -786,7 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + e_dbg("Error committing the PHY changes\n"); return ret_val; } @@ -823,7 +823,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) ret_val = e1000_phy_hw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + e_dbg("Error resetting the PHY.\n"); return ret_val; } @@ -836,7 +836,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) /* disable lplu d0 during driver init */ ret_val = e1000_set_d0_lplu_state(hw, 0); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + e_dbg("Error Disabling LPLU D0\n"); return ret_val; } /* Configure mdi-mdix settings */ @@ -972,39 +972,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + e_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + e_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + e_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + e_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + e_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + e_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -1063,7 +1063,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; return ret_val; } @@ -1072,7 +1072,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); @@ -1109,13 +1109,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + e_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + e_dbg("Error Setting up Auto-Negotiation\n"); return ret_val; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + e_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -1137,7 +1137,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = e1000_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " + e_dbg("Error while waiting for " "autoneg to complete\n"); return ret_val; } @@ -1175,10 +1175,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + e_dbg("Forcing Speed and Duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; } } @@ -1195,11 +1195,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) return ret_val; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + e_dbg("Valid link established!!!\n"); e1000e_config_collision_dist(hw); ret_val = e1000e_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + e_dbg("Unable to establish link!!!\n"); } return ret_val; @@ -1245,12 +1245,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + e_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -1260,7 +1260,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1304,7 +1304,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + e_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -1322,7 +1322,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n"); + e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, 100000, &link); @@ -1413,11 +1413,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1425,12 +1425,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + e_dbg("Forcing 10mb\n"); } e1000e_config_collision_dist(hw); @@ -1826,7 +1826,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) bool link; if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + e_dbg("Phy info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } @@ -1835,7 +1835,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1903,7 +1903,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -2031,7 +2031,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw) **/ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + e_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ @@ -2474,7 +2474,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) - hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); + e_dbg("Attempting to access page 800 while gig enabled\n"); /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2884,7 +2884,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* masking with 0x3F to remove the page from offset */ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F); if (ret_val) { - hw_dbg(hw, "Could not write PHY the HV address register\n"); + e_dbg("Could not write PHY the HV address register\n"); goto out; } @@ -2895,7 +2895,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data); if (ret_val) { - hw_dbg(hw, "Could not read data value from HV data register\n"); + e_dbg("Could not read data value from HV data register\n"); goto out; } @@ -3021,12 +3021,12 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data); + e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n"); + e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -3036,7 +3036,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -3072,7 +3072,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; }