From: Ricard Wanderlof Date: Thu, 27 Aug 2015 09:35:20 +0000 (+0200) Subject: ASoC: ics43432: Add codec driver for InvenSense ICS-43432 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3b7ce99748f0d006f9d1aa85709872e7b46787f7;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ASoC: ics43432: Add codec driver for InvenSense ICS-43432 Add support for the InvenSense ICS-43432 I2S MEMS microphone. This is a non-software-configurable MEMS microphone with I2S output. Tested on a setup with a single ICS-43432 (the device itself supports stereo operation using a hardware pin controlling left vs. right channel output). Signed-off-by: Ricard Wanderlof Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 000000000000..b02e3a6c0fef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d444757c4d9e..80bf96d4795f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -110,6 +110,7 @@ ingenic Ingenic Semiconductor innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil karo Ka-Ro electronics GmbH diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index efaafce8ba38..1bb6446dce53 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -62,6 +62,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_BT_SCO select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C + select SND_SOC_ICS43432 select SND_SOC_ISABELLE if I2C select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C @@ -446,6 +447,9 @@ config SND_SOC_ES8328_SPI tristate select SND_SOC_ES8328 +config SND_SOC_ICS43432 + tristate + config SND_SOC_ISABELLE tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index cf160d972cb3..5a19a670a82b 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -55,6 +55,7 @@ snd-soc-dmic-objs := dmic.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o +snd-soc-ics43432-objs := ics43432.o snd-soc-isabelle-objs := isabelle.o snd-soc-jz4740-codec-objs := jz4740.o snd-soc-l3-objs := l3.o @@ -242,6 +243,7 @@ obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o +obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o diff --git a/sound/soc/codecs/ics43432.c b/sound/soc/codecs/ics43432.c new file mode 100644 index 000000000000..4f202c15df39 --- /dev/null +++ b/sound/soc/codecs/ics43432.c @@ -0,0 +1,77 @@ +/* + * I2S MEMS microphone driver for InvenSense ICS-43432 + * + * - Non configurable. + * - I2S interface, 64 BCLs per frame, 32 bits per channel, 24 bit data + * + * Copyright (c) 2015 Axis Communications AB + * + * Licensed under GPL2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ICS43432_RATE_MIN 7190 /* Hz, from data sheet */ +#define ICS43432_RATE_MAX 52800 /* Hz, from data sheet */ + +#define ICS43432_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) + +static struct snd_soc_dai_driver ics43432_dai = { + .name = "ics43432-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rate_min = ICS43432_RATE_MIN, + .rate_max = ICS43432_RATE_MAX, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = ICS43432_FORMATS, + }, +}; + +static struct snd_soc_codec_driver ics43432_codec_driver = { +}; + +static int ics43432_probe(struct platform_device *pdev) +{ + return snd_soc_register_codec(&pdev->dev, &ics43432_codec_driver, + &ics43432_dai, 1); +} + +static int ics43432_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ics43432_ids[] = { + { .compatible = "invensense,ics43432", }, + { } +}; +MODULE_DEVICE_TABLE(of, ics43432_dt_ids); +#endif + +static struct platform_driver ics43432_driver = { + .driver = { + .name = "ics43432", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ics43432_ids), + }, + .probe = ics43432_probe, + .remove = ics43432_remove, +}; + +module_platform_driver(ics43432_driver); + +MODULE_DESCRIPTION("ASoC ICS43432 driver"); +MODULE_AUTHOR("Ricard Wanderlof "); +MODULE_LICENSE("GPLv2");