From: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Mon, 29 Feb 2016 22:04:58 +0000 (-0500)
Subject: rtl8xxxu: Init H2C command register for 8723bu
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3a4be6a092c89ad7a94b147c3529d6626e5a59ff;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

rtl8xxxu: Init H2C command register for 8723bu

In addition make register read/write flow match closer to vendor
driver flow. This is mainly to be able to compare the register write
log with the vendor driver, and can be optimized later once 8723bu
support is working.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index f5f38a51486f..1d0869b55c64 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -2685,6 +2685,11 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
 		goto exit;
 	}
 
+	/*
+	 * Init H2C command
+	 */
+	if (priv->rtlchip == 0x8723b)
+		rtl8xxxu_write8(priv, REG_HMTFR, 0x0f);
 exit:
 	return ret;
 }
@@ -2927,14 +2932,20 @@ static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
 
 	val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
 	val32 &= ~BIT(4);
+	rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
 	val32 |= BIT(3);
 	rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
 
 	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
-	val32 &= ~BIT(23);
 	val32 |= BIT(24);
 	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
 
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 &= ~BIT(23);
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
 	val32 = rtl8xxxu_read32(priv, 0x0944);
 	val32 |= (BIT(0) | BIT(1));
 	rtl8xxxu_write32(priv, 0x0944, val32);
@@ -2943,6 +2954,10 @@ static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
 	val32 &= 0xffffff00;
 	val32 |= 0x77;
 	rtl8xxxu_write32(priv, 0x0930, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+	val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+	rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
 }
 
 static int
@@ -6079,7 +6094,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		rtl8xxxu_write8(priv, 0xfe42, 0x80);
 	}
 
-	if (priv->rtlchip == 0x8192e || priv->rtlchip == 0x8723b) {
+	if (priv->rtlchip == 0x8192e) {
 		rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
 		rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
 	}