From: Stephen Boyd Date: Fri, 17 Jul 2015 21:41:54 +0000 (-0700) Subject: regulator: Add over current protection (OCP) support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3a003baeec246f604ed1d2e0087560d7f15edcc6;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git regulator: Add over current protection (OCP) support Some regulators can automatically shut down when they detect an over current event. Add an op (set_over_current_protection) and a DT property + constraint to support this capability. Signed-off-by: Stephen Boyd Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index db88feb28c03..24bd422cecd5 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -42,6 +42,7 @@ Optional properties: - regulator-system-load: Load in uA present on regulator that is not captured by any consumer request. - regulator-pull-down: Enable pull down resistor when the regulator is disabled. +- regulator-over-current-protection: Enable over current protection. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c9f72019bd68..520413e2bca0 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1081,6 +1081,15 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + if (rdev->constraints->over_current_protection + && ops->set_over_current_protection) { + ret = ops->set_over_current_protection(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set over current protection\n"); + goto out; + } + } + print_constraints(rdev); return 0; out: diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index b1c485b24ab2..250700c853bf 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -107,6 +107,9 @@ static void of_get_regulation_constraints(struct device_node *np, if (!of_property_read_u32(np, "regulator-system-load", &pval)) constraints->system_load = pval; + constraints->over_current_protection = of_property_read_bool(np, + "regulator-over-current-protection"); + for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { switch (i) { case PM_SUSPEND_MEM: diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4db9fbe4889d..45932228cbf5 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -148,6 +148,7 @@ struct regulator_ops { int (*get_current_limit) (struct regulator_dev *); int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); + int (*set_over_current_protection) (struct regulator_dev *); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b11be1260129..a1067d0b3991 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -147,6 +147,7 @@ struct regulation_constraints { unsigned ramp_disable:1; /* disable ramp delay */ unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ + unsigned over_current_protection:1; /* auto disable on over current */ }; /**