From: Antoine Ténart Date: Tue, 22 Aug 2017 17:08:24 +0000 (+0200) Subject: net: mvpp2: initialize the GMAC when using a port X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=3919357fb0bbdbc18366cf59cbf0f16c608f81fe;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git net: mvpp2: initialize the GMAC when using a port This adds a routine to initialize the GMAC at the port level when using a port. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart Tested-by: Marcin Wojtas Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 087eb793ab4d..2ab7366ac90f 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -315,6 +315,7 @@ /* Per-port registers */ #define MVPP2_GMAC_CTRL_0_REG 0x0 #define MVPP2_GMAC_PORT_EN_MASK BIT(0) +#define MVPP2_GMAC_PORT_TYPE_MASK BIT(1) #define MVPP2_GMAC_MAX_RX_SIZE_OFFS 2 #define MVPP2_GMAC_MAX_RX_SIZE_MASK 0x7ffc #define MVPP2_GMAC_MIB_CNTR_EN_MASK BIT(15) @@ -326,16 +327,21 @@ #define MVPP2_GMAC_SA_LOW_OFFS 7 #define MVPP2_GMAC_CTRL_2_REG 0x8 #define MVPP2_GMAC_INBAND_AN_MASK BIT(0) +#define MVPP2_GMAC_FLOW_CTRL_MASK GENMASK(2, 1) #define MVPP2_GMAC_PCS_ENABLE_MASK BIT(3) #define MVPP2_GMAC_PORT_RGMII_MASK BIT(4) +#define MVPP2_GMAC_DISABLE_PADDING BIT(5) #define MVPP2_GMAC_PORT_RESET_MASK BIT(6) #define MVPP2_GMAC_AUTONEG_CONFIG 0xc #define MVPP2_GMAC_FORCE_LINK_DOWN BIT(0) #define MVPP2_GMAC_FORCE_LINK_PASS BIT(1) +#define MVPP2_GMAC_IN_BAND_AUTONEG BIT(2) +#define MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS BIT(3) #define MVPP2_GMAC_CONFIG_MII_SPEED BIT(5) #define MVPP2_GMAC_CONFIG_GMII_SPEED BIT(6) #define MVPP2_GMAC_AN_SPEED_EN BIT(7) #define MVPP2_GMAC_FC_ADV_EN BIT(9) +#define MVPP2_GMAC_FLOW_CTRL_AUTONEG BIT(11) #define MVPP2_GMAC_CONFIG_FULL_DUPLEX BIT(12) #define MVPP2_GMAC_AN_DUPLEX_EN BIT(13) #define MVPP2_GMAC_PORT_FIFO_CFG_1_REG 0x1c @@ -4245,6 +4251,92 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask) /* Port configuration routines */ +static void mvpp2_port_mii_gmac_configure_mode(struct mvpp2_port *port) +{ + u32 val; + + if (port->phy_interface == PHY_INTERFACE_MODE_SGMII) { + val = readl(port->base + MVPP22_GMAC_CTRL_4_REG); + val |= MVPP22_CTRL4_SYNC_BYPASS_DIS | MVPP22_CTRL4_DP_CLK_SEL | + MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + val &= ~MVPP22_CTRL4_EXT_PIN_GMII_SEL; + writel(val, port->base + MVPP22_GMAC_CTRL_4_REG); + + val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + val |= MVPP2_GMAC_DISABLE_PADDING; + val &= ~MVPP2_GMAC_FLOW_CTRL_MASK; + writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + } else if (port->phy_interface == PHY_INTERFACE_MODE_RGMII || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_ID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) { + val = readl(port->base + MVPP22_GMAC_CTRL_4_REG); + val |= MVPP22_CTRL4_EXT_PIN_GMII_SEL | + MVPP22_CTRL4_SYNC_BYPASS_DIS | + MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + val &= ~MVPP22_CTRL4_DP_CLK_SEL; + writel(val, port->base + MVPP22_GMAC_CTRL_4_REG); + + val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + val &= ~MVPP2_GMAC_DISABLE_PADDING; + writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + } + + /* The port is connected to a copper PHY */ + val = readl(port->base + MVPP2_GMAC_CTRL_0_REG); + val &= ~MVPP2_GMAC_PORT_TYPE_MASK; + writel(val, port->base + MVPP2_GMAC_CTRL_0_REG); + + val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); + val |= MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS | + MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FLOW_CTRL_AUTONEG | + MVPP2_GMAC_AN_DUPLEX_EN; + if (port->phy_interface == PHY_INTERFACE_MODE_SGMII) + val |= MVPP2_GMAC_IN_BAND_AUTONEG; + writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); +} + +static void mvpp2_port_mii_gmac_configure(struct mvpp2_port *port) +{ + u32 val; + + /* Force link down */ + val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); + val &= ~MVPP2_GMAC_FORCE_LINK_PASS; + val |= MVPP2_GMAC_FORCE_LINK_DOWN; + writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); + + /* Set the GMAC in a reset state */ + val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + val |= MVPP2_GMAC_PORT_RESET_MASK; + writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + + /* Configure the PCS and in-band AN */ + val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + if (port->phy_interface == PHY_INTERFACE_MODE_SGMII) { + val |= MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK; + } else if (port->phy_interface == PHY_INTERFACE_MODE_RGMII || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_ID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) { + val &= ~MVPP2_GMAC_PCS_ENABLE_MASK; + val |= MVPP2_GMAC_PORT_RGMII_MASK; + } + writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + + mvpp2_port_mii_gmac_configure_mode(port); + + /* Unset the GMAC reset state */ + val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + val &= ~MVPP2_GMAC_PORT_RESET_MASK; + writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + + /* Stop forcing link down */ + val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); + val &= ~MVPP2_GMAC_FORCE_LINK_DOWN; + writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); +} + static void mvpp22_port_mii_set(struct mvpp2_port *port) { u32 val; @@ -4262,38 +4354,19 @@ static void mvpp22_port_mii_set(struct mvpp2_port *port) writel(val, port->base + MVPP22_XLG_CTRL3_REG); } - - val = readl(port->base + MVPP22_GMAC_CTRL_4_REG); - if (port->phy_interface == PHY_INTERFACE_MODE_RGMII) - val |= MVPP22_CTRL4_EXT_PIN_GMII_SEL; - else - val &= ~MVPP22_CTRL4_EXT_PIN_GMII_SEL; - val &= ~MVPP22_CTRL4_DP_CLK_SEL; - val |= MVPP22_CTRL4_SYNC_BYPASS_DIS; - val |= MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; - writel(val, port->base + MVPP22_GMAC_CTRL_4_REG); } static void mvpp2_port_mii_set(struct mvpp2_port *port) { - u32 val; - if (port->priv->hw_version == MVPP22) mvpp22_port_mii_set(port); - val = readl(port->base + MVPP2_GMAC_CTRL_2_REG); - - switch (port->phy_interface) { - case PHY_INTERFACE_MODE_SGMII: - val |= MVPP2_GMAC_INBAND_AN_MASK; - break; - case PHY_INTERFACE_MODE_RGMII: - val |= MVPP2_GMAC_PORT_RGMII_MASK; - default: - val &= ~MVPP2_GMAC_PCS_ENABLE_MASK; - } - - writel(val, port->base + MVPP2_GMAC_CTRL_2_REG); + if (port->phy_interface == PHY_INTERFACE_MODE_RGMII || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_ID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID || + port->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID || + port->phy_interface == PHY_INTERFACE_MODE_SGMII) + mvpp2_port_mii_gmac_configure(port); } static void mvpp2_port_fc_adv_enable(struct mvpp2_port *port)