From: Eric W. Biederman Date: Wed, 4 Oct 2006 09:16:34 +0000 (-0700) Subject: [PATCH] genirq: msi: refactor the msi_ops X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=38bc0361303535c86f6b67b151a541728d7bdae6;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git [PATCH] genirq: msi: refactor the msi_ops The current msi_ops are short sighted in a number of ways, this patch attempts to fix the glaring deficiences. - Report in msi_ops if a 64bit address is needed in the msi message, so we can fail 32bit only msi structures. - Send and receive a full struct msi_msg in both setup and target. This is a little cleaner and allows for architectures that need to modify the data to retarget the msi interrupt to a different cpu. - In target pass in the full cpu mask instead of just the first cpu in case we can make use of the full cpu mask. - Operate in terms of irqs and not vectors, currently there is still a 1-1 relationship but on architectures other than ia64 I expect this will change. Signed-off-by: Eric W. Biederman Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Benjamin Herrenschmidt Cc: Rajesh Shah Cc: Andi Kleen Cc: "Protasevich, Natalie" Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/pci/msi-altix.c b/drivers/pci/msi-altix.c index bed4183a5e39..7aedc2ac8c28 100644 --- a/drivers/pci/msi-altix.c +++ b/drivers/pci/msi-altix.c @@ -26,7 +26,7 @@ struct sn_msi_info { static struct sn_msi_info *sn_msi_info; static void -sn_msi_teardown(unsigned int vector) +sn_msi_teardown(unsigned int irq) { nasid_t nasid; int widget; @@ -36,7 +36,7 @@ sn_msi_teardown(unsigned int vector) struct pcibus_bussoft *bussoft; struct sn_pcibus_provider *provider; - sn_irq_info = sn_msi_info[vector].sn_irq_info; + sn_irq_info = sn_msi_info[irq].sn_irq_info; if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) return; @@ -45,9 +45,9 @@ sn_msi_teardown(unsigned int vector) provider = SN_PCIDEV_BUSPROVIDER(pdev); (*provider->dma_unmap)(pdev, - sn_msi_info[vector].pci_addr, + sn_msi_info[irq].pci_addr, PCI_DMA_FROMDEVICE); - sn_msi_info[vector].pci_addr = 0; + sn_msi_info[irq].pci_addr = 0; bussoft = SN_PCIDEV_BUSSOFT(pdev); nasid = NASID_GET(bussoft->bs_base); @@ -56,14 +56,13 @@ sn_msi_teardown(unsigned int vector) SWIN_WIDGETNUM(bussoft->bs_base); sn_intr_free(nasid, widget, sn_irq_info); - sn_msi_info[vector].sn_irq_info = NULL; + sn_msi_info[irq].sn_irq_info = NULL; return; } int -sn_msi_setup(struct pci_dev *pdev, unsigned int vector, - u32 *addr_hi, u32 *addr_lo, u32 *data) +sn_msi_setup(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) { int widget; int status; @@ -93,7 +92,7 @@ sn_msi_setup(struct pci_dev *pdev, unsigned int vector, if (! sn_irq_info) return -ENOMEM; - status = sn_intr_alloc(nasid, widget, sn_irq_info, vector, -1, -1); + status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1); if (status) { kfree(sn_irq_info); return -ENOMEM; @@ -119,28 +118,27 @@ sn_msi_setup(struct pci_dev *pdev, unsigned int vector, return -ENOMEM; } - sn_msi_info[vector].sn_irq_info = sn_irq_info; - sn_msi_info[vector].pci_addr = bus_addr; + sn_msi_info[irq].sn_irq_info = sn_irq_info; + sn_msi_info[irq].pci_addr = bus_addr; - *addr_hi = (u32)(bus_addr >> 32); - *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); + msg->address_hi = (u32)(bus_addr >> 32); + msg->address_lo = (u32)(bus_addr & 0x00000000ffffffff); /* * In the SN platform, bit 16 is a "send vector" bit which * must be present in order to move the vector through the system. */ - *data = 0x100 + (unsigned int)vector; + msg->data = 0x100 + irq; #ifdef CONFIG_SMP - set_irq_affinity_info((vector & 0xff), sn_irq_info->irq_cpuid, 0); + set_irq_affinity_info(irq, sn_irq_info->irq_cpuid, 0); #endif return 0; } static void -sn_msi_target(unsigned int vector, unsigned int cpu, - u32 *addr_hi, u32 *addr_lo) +sn_msi_target(unsigned int irq, cpumask_t cpu_mask, struct msi_msg *msg) { int slice; nasid_t nasid; @@ -150,8 +148,10 @@ sn_msi_target(unsigned int vector, unsigned int cpu, struct sn_irq_info *sn_irq_info; struct sn_irq_info *new_irq_info; struct sn_pcibus_provider *provider; + unsigned int cpu; - sn_irq_info = sn_msi_info[vector].sn_irq_info; + cpu = first_cpu(cpu_mask); + sn_irq_info = sn_msi_info[irq].sn_irq_info; if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) return; @@ -163,15 +163,15 @@ sn_msi_target(unsigned int vector, unsigned int cpu, pdev = sn_pdev->pdi_linux_pcidev; provider = SN_PCIDEV_BUSPROVIDER(pdev); - bus_addr = (u64)(*addr_hi) << 32 | (u64)(*addr_lo); + bus_addr = (u64)(msg->address_hi) << 32 | (u64)(msg->address_lo); (*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE); - sn_msi_info[vector].pci_addr = 0; + sn_msi_info[irq].pci_addr = 0; nasid = cpuid_to_nasid(cpu); slice = cpuid_to_slice(cpu); new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice); - sn_msi_info[vector].sn_irq_info = new_irq_info; + sn_msi_info[irq].sn_irq_info = new_irq_info; if (new_irq_info == NULL) return; @@ -184,12 +184,13 @@ sn_msi_target(unsigned int vector, unsigned int cpu, sizeof(new_irq_info->irq_xtalkaddr), SN_DMA_MSI|SN_DMA_ADDR_XIO); - sn_msi_info[vector].pci_addr = bus_addr; - *addr_hi = (u32)(bus_addr >> 32); - *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); + sn_msi_info[irq].pci_addr = bus_addr; + msg->address_hi = (u32)(bus_addr >> 32); + msg->address_lo = (u32)(bus_addr & 0x00000000ffffffff); } struct msi_ops sn_msi_ops = { + .needs_64bit_address = 1, .setup = sn_msi_setup, .teardown = sn_msi_teardown, #ifdef CONFIG_SMP @@ -201,7 +202,7 @@ int sn_msi_init(void) { sn_msi_info = - kzalloc(sizeof(struct sn_msi_info) * NR_VECTORS, GFP_KERNEL); + kzalloc(sizeof(struct sn_msi_info) * NR_IRQS, GFP_KERNEL); if (! sn_msi_info) return -ENOMEM; diff --git a/drivers/pci/msi-apic.c b/drivers/pci/msi-apic.c index 5ed798b319c7..afc0ed13aa89 100644 --- a/drivers/pci/msi-apic.c +++ b/drivers/pci/msi-apic.c @@ -46,37 +46,36 @@ static void -msi_target_apic(unsigned int vector, - unsigned int dest_cpu, - u32 *address_hi, /* in/out */ - u32 *address_lo) /* in/out */ +msi_target_apic(unsigned int irq, cpumask_t cpu_mask, struct msi_msg *msg) { - u32 addr = *address_lo; + u32 addr = msg->address_lo; addr &= MSI_ADDR_DESTID_MASK; - addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(dest_cpu)); + addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(first_cpu(cpu_mask))); - *address_lo = addr; + msg->address_lo = addr; } static int msi_setup_apic(struct pci_dev *pdev, /* unused in generic */ - unsigned int vector, - u32 *address_hi, - u32 *address_lo, - u32 *data) + unsigned int irq, + struct msi_msg *msg) { unsigned long dest_phys_id; + unsigned int vector; dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map)); + vector = irq; - *address_hi = 0; - *address_lo = MSI_ADDR_HEADER | - MSI_ADDR_DESTMODE_PHYS | - MSI_ADDR_REDIRECTION_CPU | - MSI_ADDR_DESTID_CPU(dest_phys_id); + msg->address_hi = 0; + msg->address_lo = + MSI_ADDR_HEADER | + MSI_ADDR_DESTMODE_PHYS | + MSI_ADDR_REDIRECTION_CPU | + MSI_ADDR_DESTID_CPU(dest_phys_id); - *data = MSI_DATA_TRIGGER_EDGE | + msg->data = + MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | MSI_DATA_DELIVERY_FIXED | MSI_DATA_VECTOR(vector); @@ -85,7 +84,7 @@ msi_setup_apic(struct pci_dev *pdev, /* unused in generic */ } static void -msi_teardown_apic(unsigned int vector) +msi_teardown_apic(unsigned int irq) { return; /* no-op */ } @@ -95,6 +94,7 @@ msi_teardown_apic(unsigned int vector) */ struct msi_ops msi_apic_ops = { + .needs_64bit_address = 0, .setup = msi_setup_apic, .teardown = msi_teardown_apic, .target = msi_target_apic, diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index cca6cb3ccdac..6d9de026e141 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -165,19 +165,17 @@ static void write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) } #ifdef CONFIG_SMP -static void set_msi_affinity(unsigned int vector, cpumask_t cpu_mask) +static void set_msi_affinity(unsigned int irq, cpumask_t cpu_mask) { struct msi_desc *entry; struct msi_msg msg; - unsigned int irq = vector; - unsigned int dest_cpu = first_cpu(cpu_mask); - entry = (struct msi_desc *)msi_desc[vector]; + entry = msi_desc[irq]; if (!entry || !entry->dev) return; read_msi_msg(entry, &msg); - msi_ops->target(vector, dest_cpu, &msg.address_hi, &msg.address_lo); + msi_ops->target(irq, cpu_mask, &msg); write_msi_msg(entry, &msg); set_native_irq_info(irq, cpu_mask); } @@ -701,14 +699,14 @@ static int msi_register_init(struct pci_dev *dev, struct msi_desc *entry) { int status; struct msi_msg msg; - int pos, vector = dev->irq; + int pos; u16 control; pos = entry->msi_attrib.pos; pci_read_config_word(dev, msi_control_reg(pos), &control); /* Configure MSI capability structure */ - status = msi_ops->setup(dev, vector, &msg.address_hi, &msg.address_lo, &msg.data); + status = msi_ops->setup(dev, dev->irq, &msg); if (status < 0) return status; @@ -863,10 +861,7 @@ static int msix_capability_init(struct pci_dev *dev, /* Replace with MSI-X handler */ irq_handler_init(PCI_CAP_ID_MSIX, vector, 1); /* Configure MSI-X capability structure */ - status = msi_ops->setup(dev, vector, - &msg.address_hi, - &msg.address_lo, - &msg.data); + status = msi_ops->setup(dev, vector, &msg); if (status < 0) break; @@ -928,6 +923,7 @@ int pci_msi_supported(struct pci_dev * dev) int pci_enable_msi(struct pci_dev* dev) { int pos, temp, status; + u16 control; if (pci_msi_supported(dev) < 0) return -EINVAL; @@ -942,6 +938,10 @@ int pci_enable_msi(struct pci_dev* dev) if (!pos) return -EINVAL; + pci_read_config_word(dev, msi_control_reg(pos), &control); + if (!is_64bit_address(control) && msi_ops->needs_64bit_address) + return -EINVAL; + WARN_ON(!msi_lookup_vector(dev, PCI_CAP_ID_MSI)); /* Check whether driver already requested for MSI-X vectors */ diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index 62f61b61d2c9..3519eca50d8a 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,68 +6,6 @@ #ifndef MSI_H #define MSI_H -/* - * MSI operation vector. Used by the msi core code (drivers/pci/msi.c) - * to abstract platform-specific tasks relating to MSI address generation - * and resource management. - */ -struct msi_ops { - /** - * setup - generate an MSI bus address and data for a given vector - * @pdev: PCI device context (in) - * @vector: vector allocated by the msi core (in) - * @addr_hi: upper 32 bits of PCI bus MSI address (out) - * @addr_lo: lower 32 bits of PCI bus MSI address (out) - * @data: MSI data payload (out) - * - * Description: The setup op is used to generate a PCI bus addres and - * data which the msi core will program into the card MSI capability - * registers. The setup routine is responsible for picking an initial - * cpu to target the MSI at. The setup routine is responsible for - * examining pdev to determine the MSI capabilities of the card and - * generating a suitable address/data. The setup routine is - * responsible for allocating and tracking any system resources it - * needs to route the MSI to the cpu it picks, and for associating - * those resources with the passed in vector. - * - * Returns 0 if the MSI address/data was successfully setup. - **/ - - int (*setup) (struct pci_dev *pdev, unsigned int vector, - u32 *addr_hi, u32 *addr_lo, u32 *data); - - /** - * teardown - release resources allocated by setup - * @vector: vector context for resources (in) - * - * Description: The teardown op is used to release any resources - * that were allocated in the setup routine associated with the passed - * in vector. - **/ - - void (*teardown) (unsigned int vector); - - /** - * target - retarget an MSI at a different cpu - * @vector: vector context for resources (in) - * @cpu: new cpu to direct vector at (in) - * @addr_hi: new value of PCI bus upper 32 bits (in/out) - * @addr_lo: new value of PCI bus lower 32 bits (in/out) - * - * Description: The target op is used to redirect an MSI vector - * at a different cpu. addr_hi/addr_lo coming in are the existing - * values that the MSI core has programmed into the card. The - * target code is responsible for freeing any resources (if any) - * associated with the old address, and generating a new PCI bus - * addr_hi/addr_lo that will redirect the vector at the indicated cpu. - **/ - - void (*target) (unsigned int vector, unsigned int cpu, - u32 *addr_hi, u32 *addr_lo); -}; - -extern int msi_register(struct msi_ops *ops); - #include /* diff --git a/include/linux/pci.h b/include/linux/pci.h index b9bb6c46e056..2aabe90f1cd2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -617,6 +617,68 @@ extern int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec); extern void pci_disable_msix(struct pci_dev *dev); extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); + +/* + * MSI operation vector. Used by the msi core code (drivers/pci/msi.c) + * to abstract platform-specific tasks relating to MSI address generation + * and resource management. + */ +struct msi_ops { + int needs_64bit_address; + /** + * setup - generate an MSI bus address and data for a given vector + * @pdev: PCI device context (in) + * @irq: irq allocated by the msi core (in) + * @msg: PCI bus address and data for msi message (out) + * + * Description: The setup op is used to generate a PCI bus addres and + * data which the msi core will program into the card MSI capability + * registers. The setup routine is responsible for picking an initial + * cpu to target the MSI at. The setup routine is responsible for + * examining pdev to determine the MSI capabilities of the card and + * generating a suitable address/data. The setup routine is + * responsible for allocating and tracking any system resources it + * needs to route the MSI to the cpu it picks, and for associating + * those resources with the passed in vector. + * + * Returns 0 if the MSI address/data was successfully setup. + **/ + + int (*setup) (struct pci_dev *pdev, unsigned int irq, + struct msi_msg *msg); + + /** + * teardown - release resources allocated by setup + * @vector: vector context for resources (in) + * + * Description: The teardown op is used to release any resources + * that were allocated in the setup routine associated with the passed + * in vector. + **/ + + void (*teardown) (unsigned int irq); + + /** + * target - retarget an MSI at a different cpu + * @vector: vector context for resources (in) + * @cpu: new cpu to direct vector at (in) + * @addr_hi: new value of PCI bus upper 32 bits (in/out) + * @addr_lo: new value of PCI bus lower 32 bits (in/out) + * + * Description: The target op is used to redirect an MSI vector + * at a different cpu. addr_hi/addr_lo coming in are the existing + * values that the MSI core has programmed into the card. The + * target code is responsible for freeing any resources (if any) + * associated with the old address, and generating a new PCI bus + * addr_hi/addr_lo that will redirect the vector at the indicated cpu. + **/ + + void (*target) (unsigned int irq, cpumask_t cpumask, + struct msi_msg *msg); +}; + +extern int msi_register(struct msi_ops *ops); + #endif extern void pci_block_user_cfg_access(struct pci_dev *dev);