From: Gaurav K Singh Date: Fri, 5 Dec 2014 08:52:44 +0000 (+0530) Subject: drm/i915: Update the DSI disable path to support dual link panel disabling X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=384f02a2c4551fc785477d1808a59d717fd70420;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Update the DSI disable path to support dual link panel disabling We need to program both port registers during dual link disable path. v2: Address review comments by Jani - Used a for loop instead of do-while loop. v3: Used for_each_dsi_port macro instead of for loop v4: Added comments for the usage of AFE latchout bit Signed-off-by: Gaurav K Singh Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 585538bccb1a..805492840231 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -281,9 +281,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe); + enum port port; u32 temp; DRM_DEBUG_KMS("\n"); @@ -295,23 +294,24 @@ static void intel_dsi_disable(struct intel_encoder *encoder) msleep(2); } - /* Panel commands can be sent when clock is in LP11 */ - I915_WRITE(MIPI_DEVICE_READY(port), 0x0); - - temp = I915_READ(MIPI_CTRL(port)); - temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; - I915_WRITE(MIPI_CTRL(port), temp | - intel_dsi->escape_clk_div << - ESCAPE_CLOCK_DIVIDER_SHIFT); + for_each_dsi_port(port, intel_dsi->ports) { + /* Panel commands can be sent when clock is in LP11 */ + I915_WRITE(MIPI_DEVICE_READY(port), 0x0); - I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); + temp = I915_READ(MIPI_CTRL(port)); + temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(port), temp | + intel_dsi->escape_clk_div << + ESCAPE_CLOCK_DIVIDER_SHIFT); - temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); - temp &= ~VID_MODE_FORMAT_MASK; - I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); - I915_WRITE(MIPI_DEVICE_READY(port), 0x1); + temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); + temp &= ~VID_MODE_FORMAT_MASK; + I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); + I915_WRITE(MIPI_DEVICE_READY(port), 0x1); + } /* if disable packets are sent before sending shutdown packet then in * some next enable sequence send turn on packet error is observed */ if (intel_dsi->dev.dev_ops->disable) @@ -323,31 +323,42 @@ static void intel_dsi_disable(struct intel_encoder *encoder) static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); - enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; u32 val; DRM_DEBUG_KMS("\n"); + for_each_dsi_port(port, intel_dsi->ports) { - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | ULPS_STATE_ENTER); - usleep_range(2000, 2500); - - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | ULPS_STATE_EXIT); - usleep_range(2000, 2500); - - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | ULPS_STATE_ENTER); - usleep_range(2000, 2500); - - if (wait_for(((I915_READ(MIPI_PORT_CTRL(port)) & AFE_LATCHOUT) - == 0x00000), 30)) - DRM_ERROR("DSI LP not going Low\n"); - - val = I915_READ(MIPI_PORT_CTRL(port)); - I915_WRITE(MIPI_PORT_CTRL(port), val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - - I915_WRITE(MIPI_DEVICE_READY(port), 0x00); - usleep_range(2000, 2500); + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_EXIT); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + /* Wait till Clock lanes are in LP-00 state for MIPI Port A + * only. MIPI Port C has no similar bit for checking + */ + if (wait_for(((I915_READ(MIPI_PORT_CTRL(PORT_A)) & AFE_LATCHOUT) + == 0x00000), 30)) + DRM_ERROR("DSI LP not going Low\n"); + + val = I915_READ(MIPI_PORT_CTRL(port)); + /* Disable MIPI PHY transparent latch + * Common bit for both MIPI Port A & MIPI Port C + */ + I915_WRITE(MIPI_PORT_CTRL(PORT_A), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + + I915_WRITE(MIPI_DEVICE_READY(port), 0x00); + usleep_range(2000, 2500); + } vlv_disable_dsi_pll(encoder); }