From: Paul Mundt Date: Mon, 1 Nov 2010 13:49:04 +0000 (-0400) Subject: sh: machvec IO death. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=37b7a97884ba64bf7d403351ac2a9476ab4f1bba;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git sh: machvec IO death. This takes a bit of a sledgehammer to the machvec I/O routines. The iomem case requires no special casing and so can just be dropped outright. This only leaves the ioport casing for PCI and SuperIO mangling. With the SuperIO case going through the standard ioport mapping, it's possible to replace everything with generic routines. With this done the standard I/O routines are tidied up and NO_IOPORT now gets default-enabled for the vast majority of boards. Signed-off-by: Paul Mundt --- diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5c075f562eba..32cd5f131e42 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -161,7 +161,8 @@ config ARCH_HAS_CPU_IDLE_WAIT def_bool y config NO_IOPORT - bool + def_bool !PCI + depends on !SH_CAYMAN && !SH_SH4202_MICRODEV config IO_TRAPPED bool diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c index 32f875e8493d..f968f17891a4 100644 --- a/arch/sh/boards/board-secureedge5410.c +++ b/arch/sh/boards/board-secureedge5410.c @@ -29,8 +29,6 @@ unsigned short secureedge5410_ioport; */ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - ctrl_delay(); /* dummy read */ - printk("SnapGear: erase switch interrupt!\n"); return IRQ_HANDLED; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 60ee09a4e121..a09c77dd09db 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -382,14 +382,13 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, struct pci_channel *chan = dev->sysdata; if (unlikely(!chan->io_map_base)) { - chan->io_map_base = generic_io_base; + chan->io_map_base = sh_io_port_base; if (pci_domains_supported) panic("To avoid data corruption io_map_base MUST be " "set with multiple PCI domains."); } - return (void __iomem *)(chan->io_map_base + port); } diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index b237d525d592..89ab2c57a4c2 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -1,5 +1,6 @@ #ifndef __ASM_SH_IO_H #define __ASM_SH_IO_H + /* * Convention: * read{b,w,l,q}/write{b,w,l,q} are for PCI, @@ -15,12 +16,6 @@ * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice * these have the same semantics as the __raw variants, and as such, all * new code should be using the __raw versions. - * - * All ISA I/O routines are wrapped through the machine vector. If a - * board does not provide overrides, a generic set that are copied in - * from the default machine vector are used instead. These are largely - * for old compat code for I/O offseting to SuperIOs, all of which are - * better handled through the machvec ioport mapping routines these days. */ #include #include @@ -31,39 +26,10 @@ #include #ifdef __KERNEL__ -/* - * Depending on which platform we are running on, we need different - * I/O functions. - */ -#define __IO_PREFIX generic +#define __IO_PREFIX generic #include #include -#ifdef CONFIG_HAS_IOPORT - -#define inb(p) sh_mv.mv_inb((p)) -#define inw(p) sh_mv.mv_inw((p)) -#define inl(p) sh_mv.mv_inl((p)) -#define outb(x,p) sh_mv.mv_outb((x),(p)) -#define outw(x,p) sh_mv.mv_outw((x),(p)) -#define outl(x,p) sh_mv.mv_outl((x),(p)) - -#define inb_p(p) sh_mv.mv_inb_p((p)) -#define inw_p(p) sh_mv.mv_inw_p((p)) -#define inl_p(p) sh_mv.mv_inl_p((p)) -#define outb_p(x,p) sh_mv.mv_outb_p((x),(p)) -#define outw_p(x,p) sh_mv.mv_outw_p((x),(p)) -#define outl_p(x,p) sh_mv.mv_outl_p((x),(p)) - -#define insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) -#define insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) -#define insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) -#define outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) -#define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) -#define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) - -#endif - #define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v)) #define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v)) #define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v)) @@ -74,68 +40,39 @@ #define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a)) #define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a)) -#define readb(a) ({ u8 r_ = __raw_readb(a); mb(); r_; }) -#define readw(a) ({ u16 r_ = __raw_readw(a); mb(); r_; }) -#define readl(a) ({ u32 r_ = __raw_readl(a); mb(); r_; }) -#define readq(a) ({ u64 r_ = __raw_readq(a); mb(); r_; }) - -#define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) -#define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) -#define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) -#define writeq(v,a) ({ __raw_writeq((v),(a)); mb(); }) - -/* - * Legacy SuperH on-chip I/O functions - * - * These are all deprecated, all new (and especially cross-platform) code - * should be using the __raw_xxx() routines directly. - */ -static inline u8 __deprecated ctrl_inb(unsigned long addr) -{ - return __raw_readb(addr); -} - -static inline u16 __deprecated ctrl_inw(unsigned long addr) -{ - return __raw_readw(addr); -} - -static inline u32 __deprecated ctrl_inl(unsigned long addr) -{ - return __raw_readl(addr); -} - -static inline u64 __deprecated ctrl_inq(unsigned long addr) -{ - return __raw_readq(addr); -} - -static inline void __deprecated ctrl_outb(u8 v, unsigned long addr) -{ - __raw_writeb(v, addr); -} - -static inline void __deprecated ctrl_outw(u16 v, unsigned long addr) -{ - __raw_writew(v, addr); -} - -static inline void __deprecated ctrl_outl(u32 v, unsigned long addr) -{ - __raw_writel(v, addr); -} - -static inline void __deprecated ctrl_outq(u64 v, unsigned long addr) -{ - __raw_writeq(v, addr); -} - -extern unsigned long generic_io_base; - -static inline void ctrl_delay(void) -{ - __raw_readw(generic_io_base); -} +#define readb_relaxed(c) ({ u8 __v = __raw_readb(c); __v; }) +#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(c)); __v; }) +#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(c)); __v; }) +#define readq_relaxed(c) ({ u64 __v = le64_to_cpu((__force __le64) \ + __raw_readq(c)); __v; }) + +#define writeb_relaxed(v,c) ((void)__raw_writeb(v,c)) +#define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \ + cpu_to_le16(v),c)) +#define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ + cpu_to_le32(v),c)) +#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64) \ + cpu_to_le64(v),c)) + +#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; }) +#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; }) +#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; }) +#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; }) + +#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); }) +#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); }) +#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); }) +#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); }) + +#define readsb(p,d,l) __raw_readsb(p,d,l) +#define readsw(p,d,l) __raw_readsw(p,d,l) +#define readsl(p,d,l) __raw_readsl(p,d,l) + +#define writesb(p,d,l) __raw_writesb(p,d,l) +#define writesw(p,d,l) __raw_writesw(p,d,l) +#define writesl(p,d,l) __raw_writesl(p,d,l) #define __BUILD_UNCACHED_IO(bwlq, type) \ static inline type read##bwlq##_uncached(unsigned long addr) \ @@ -159,10 +96,11 @@ __BUILD_UNCACHED_IO(w, u16) __BUILD_UNCACHED_IO(l, u32) __BUILD_UNCACHED_IO(q, u64) -#define __BUILD_MEMORY_STRING(bwlq, type) \ +#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \ \ -static inline void __raw_writes##bwlq(volatile void __iomem *mem, \ - const void *addr, unsigned int count) \ +static inline void \ +pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \ + unsigned int count) \ { \ const volatile type *__addr = addr; \ \ @@ -172,8 +110,8 @@ static inline void __raw_writes##bwlq(volatile void __iomem *mem, \ } \ } \ \ -static inline void __raw_reads##bwlq(volatile void __iomem *mem, \ - void *addr, unsigned int count) \ +static inline void pfx##reads##bwlq(volatile void __iomem *mem, \ + void *addr, unsigned int count) \ { \ volatile type *__addr = addr; \ \ @@ -183,85 +121,166 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem, \ } \ } -__BUILD_MEMORY_STRING(b, u8) -__BUILD_MEMORY_STRING(w, u16) +__BUILD_MEMORY_STRING(__raw_, b, u8) +__BUILD_MEMORY_STRING(__raw_, w, u16) #ifdef CONFIG_SUPERH32 void __raw_writesl(void __iomem *addr, const void *data, int longlen); void __raw_readsl(const void __iomem *addr, void *data, int longlen); #else -__BUILD_MEMORY_STRING(l, u32) +__BUILD_MEMORY_STRING(__raw_, l, u32) #endif -__BUILD_MEMORY_STRING(q, u64) - -#define writesb __raw_writesb -#define writesw __raw_writesw -#define writesl __raw_writesl - -#define readsb __raw_readsb -#define readsw __raw_readsw -#define readsl __raw_readsl - -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) -#define readq_relaxed(a) readq(a) - -#ifndef CONFIG_GENERIC_IOMAP -/* Simple MMIO */ -#define ioread8(a) __raw_readb(a) -#define ioread16(a) __raw_readw(a) -#define ioread16be(a) be16_to_cpu(__raw_readw((a))) -#define ioread32(a) __raw_readl(a) -#define ioread32be(a) be32_to_cpu(__raw_readl((a))) - -#define iowrite8(v,a) __raw_writeb((v),(a)) -#define iowrite16(v,a) __raw_writew((v),(a)) -#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) -#define iowrite32(v,a) __raw_writel((v),(a)) -#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) - -#define ioread8_rep(a, d, c) __raw_readsb((a), (d), (c)) -#define ioread16_rep(a, d, c) __raw_readsw((a), (d), (c)) -#define ioread32_rep(a, d, c) __raw_readsl((a), (d), (c)) - -#define iowrite8_rep(a, s, c) __raw_writesb((a), (s), (c)) -#define iowrite16_rep(a, s, c) __raw_writesw((a), (s), (c)) -#define iowrite32_rep(a, s, c) __raw_writesl((a), (s), (c)) +__BUILD_MEMORY_STRING(__raw_, q, u64) + +#ifdef CONFIG_HAS_IOPORT + +/* + * Slowdown I/O port space accesses for antique hardware. + */ +#undef CONF_SLOWDOWN_IO + +/* + * On SuperH I/O ports are memory mapped, so we access them using normal + * load/store instructions. sh_io_port_base is the virtual address to + * which all ports are being mapped. + */ +extern const unsigned long sh_io_port_base; + +static inline void __set_io_port_base(unsigned long pbase) +{ + *(unsigned long *)&sh_io_port_base = pbase; + barrier(); +} + +#ifdef CONFIG_GENERIC_IOMAP +#define __ioport_map ioport_map +#else +extern void __iomem *__ioport_map(unsigned long addr, unsigned int size); #endif -#define mmio_insb(p,d,c) __raw_readsb(p,d,c) -#define mmio_insw(p,d,c) __raw_readsw(p,d,c) -#define mmio_insl(p,d,c) __raw_readsl(p,d,c) +#ifdef CONF_SLOWDOWN_IO +#define SLOW_DOWN_IO __raw_readw(sh_io_port_base) +#else +#define SLOW_DOWN_IO +#endif -#define mmio_outsb(p,s,c) __raw_writesb(p,s,c) -#define mmio_outsw(p,s,c) __raw_writesw(p,s,c) -#define mmio_outsl(p,s,c) __raw_writesl(p,s,c) +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + \ + __addr = __ioport_map(port, sizeof(type)); \ + *__addr = val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __ioport_map(port, sizeof(type)); \ + __val = *__addr; \ + slow; \ + \ + return __val; \ +} -/* synco on SH-4A, otherwise a nop */ -#define mmiowb() wmb() +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) -#define IO_SPACE_LIMIT 0xffffffff +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) -#ifdef CONFIG_HAS_IOPORT +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +BUILDIO_IOPORT(q, u64) + +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = in##bwlq(port); \ + __addr++; \ + } \ +} + +__BUILD_IOPORT_STRING(b, u8) +__BUILD_IOPORT_STRING(w, u16) +__BUILD_IOPORT_STRING(l, u32) +__BUILD_IOPORT_STRING(q, u64) + +#endif /* - * This function provides a method for the generic case where a - * board-specific ioport_map simply needs to return the port + some - * arbitrary port base. + * Legacy SuperH on-chip I/O functions * - * We use this at board setup time to implicitly set the port base, and - * as a result, we can use the generic ioport_map. + * These are all deprecated, all new (and especially cross-platform) code + * should be using the __raw_xxx() routines directly. */ -static inline void __set_io_port_base(unsigned long pbase) +static inline u8 __deprecated ctrl_inb(unsigned long addr) { - generic_io_base = pbase; + return __raw_readb(addr); } -#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) +static inline u16 __deprecated ctrl_inw(unsigned long addr) +{ + return __raw_readw(addr); +} -#endif +static inline u32 __deprecated ctrl_inl(unsigned long addr) +{ + return __raw_readl(addr); +} + +static inline u64 __deprecated ctrl_inq(unsigned long addr) +{ + return __raw_readq(addr); +} + +static inline void __deprecated ctrl_outb(u8 v, unsigned long addr) +{ + __raw_writeb(v, addr); +} + +static inline void __deprecated ctrl_outw(u16 v, unsigned long addr) +{ + __raw_writew(v, addr); +} + +static inline void __deprecated ctrl_outl(u32 v, unsigned long addr) +{ + __raw_writel(v, addr); +} + +static inline void __deprecated ctrl_outq(u64 v, unsigned long addr) +{ + __raw_writeq(v, addr); +} + +#define IO_SPACE_LIMIT 0xffffffff + +/* synco on SH-4A, otherwise a nop */ +#define mmiowb() wmb() /* We really want to try and get these to memcpy etc */ void memcpy_fromio(void *, const volatile void __iomem *, unsigned long); @@ -395,10 +414,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; } #define ioremap_nocache ioremap #define iounmap __iounmap -#define maybebadio(port) \ - printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ - __func__, __LINE__, (port), (u32)__builtin_return_address(0)) - /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h index 491df93cbf8e..b5f6956f19c8 100644 --- a/arch/sh/include/asm/io_generic.h +++ b/arch/sh/include/asm/io_generic.h @@ -11,31 +11,6 @@ #error "Don't include this header without a valid system prefix" #endif -u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); - -void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); - -u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); -void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); - -void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); - -void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); -void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); - void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); void IO_CONCAT(__IO_PREFIX,mem_init)(void); diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index a0b0cf79cf8a..dd5d6e5bf204 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -23,27 +23,6 @@ struct sh_machine_vector { void (*mv_init_irq)(void); #ifdef CONFIG_HAS_IOPORT - u8 (*mv_inb)(unsigned long); - u16 (*mv_inw)(unsigned long); - u32 (*mv_inl)(unsigned long); - void (*mv_outb)(u8, unsigned long); - void (*mv_outw)(u16, unsigned long); - void (*mv_outl)(u32, unsigned long); - - u8 (*mv_inb_p)(unsigned long); - u16 (*mv_inw_p)(unsigned long); - u32 (*mv_inl_p)(unsigned long); - void (*mv_outb_p)(u8, unsigned long); - void (*mv_outw_p)(u16, unsigned long); - void (*mv_outl_p)(u32, unsigned long); - - void (*mv_insb)(unsigned long, void *dst, unsigned long count); - void (*mv_insw)(unsigned long, void *dst, unsigned long count); - void (*mv_insl)(unsigned long, void *dst, unsigned long count); - void (*mv_outsb)(unsigned long, const void *src, unsigned long count); - void (*mv_outsw)(unsigned long, const void *src, unsigned long count); - void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); void (*mv_ioport_unmap)(void __iomem *); #endif diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 8eed6a485446..ff80227b02d8 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -20,6 +20,11 @@ obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \ syscalls_$(BITS).o time.o topology.o traps.o \ traps_$(BITS).o unwinder.o +ifndef CONFIG_GENERIC_IOMAP +obj-y += iomap.o +obj-$(CONFIG_HAS_IOPORT) += ioport.o +endif + obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o @@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o -obj-$(CONFIG_HAS_IOPORT) += io_generic.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c deleted file mode 100644 index 447d78f666f9..000000000000 --- a/arch/sh/kernel/io_generic.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/sh/kernel/io_generic.c - * - * Copyright (C) 2000 Niibe Yutaka - * Copyright (C) 2005 - 2007 Paul Mundt - * - * Generic I/O routine. These can be used where a machine specific version - * is not required. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include - -#ifdef CONFIG_CPU_SH3 -/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a - * workaround. */ -/* I'm not sure SH7709 has this kind of bug */ -#define dummy_read() __raw_readb(0xba000000) -#else -#define dummy_read() -#endif - -unsigned long generic_io_base = 0; - -u8 generic_inb(unsigned long port) -{ - return __raw_readb(__ioport_map(port, 1)); -} - -u16 generic_inw(unsigned long port) -{ - return __raw_readw(__ioport_map(port, 2)); -} - -u32 generic_inl(unsigned long port) -{ - return __raw_readl(__ioport_map(port, 4)); -} - -u8 generic_inb_p(unsigned long port) -{ - unsigned long v = generic_inb(port); - - ctrl_delay(); - return v; -} - -u16 generic_inw_p(unsigned long port) -{ - unsigned long v = generic_inw(port); - - ctrl_delay(); - return v; -} - -u32 generic_inl_p(unsigned long port) -{ - unsigned long v = generic_inl(port); - - ctrl_delay(); - return v; -} - -/* - * insb/w/l all read a series of bytes/words/longs from a fixed port - * address. However as the port address doesn't change we only need to - * convert the port address to real address once. - */ - -void generic_insb(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsb(__ioport_map(port, 1), dst, count); - dummy_read(); -} - -void generic_insw(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsw(__ioport_map(port, 2), dst, count); - dummy_read(); -} - -void generic_insl(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsl(__ioport_map(port, 4), dst, count); - dummy_read(); -} - -void generic_outb(u8 b, unsigned long port) -{ - __raw_writeb(b, __ioport_map(port, 1)); -} - -void generic_outw(u16 b, unsigned long port) -{ - __raw_writew(b, __ioport_map(port, 2)); -} - -void generic_outl(u32 b, unsigned long port) -{ - __raw_writel(b, __ioport_map(port, 4)); -} - -void generic_outb_p(u8 b, unsigned long port) -{ - generic_outb(b, port); - ctrl_delay(); -} - -void generic_outw_p(u16 b, unsigned long port) -{ - generic_outw(b, port); - ctrl_delay(); -} - -void generic_outl_p(u32 b, unsigned long port) -{ - generic_outl(b, port); - ctrl_delay(); -} - -/* - * outsb/w/l all write a series of bytes/words/longs to a fixed port - * address. However as the port address doesn't change we only need to - * convert the port address to real address once. - */ -void generic_outsb(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesb(__ioport_map(port, 1), src, count); - dummy_read(); -} - -void generic_outsw(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesw(__ioport_map(port, 2), src, count); - dummy_read(); -} - -void generic_outsl(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesl(__ioport_map(port, 4), src, count); - dummy_read(); -} - -void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) -{ -#ifdef P1SEG - if (PXSEG(addr) >= P1SEG) - return (void __iomem *)addr; -#endif - - return (void __iomem *)(addr + generic_io_base); -} - -void generic_ioport_unmap(void __iomem *addr) -{ -} - -#ifndef CONFIG_GENERIC_IOMAP -void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - void __iomem *ret; - - ret = __ioport_map_trapped(port, nr); - if (ret) - return ret; - - return __ioport_map(port, nr); -} -EXPORT_SYMBOL(ioport_map); - -void ioport_unmap(void __iomem *addr) -{ - sh_mv.mv_ioport_unmap(addr); -} -EXPORT_SYMBOL(ioport_unmap); -#endif /* CONFIG_GENERIC_IOMAP */ diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c new file mode 100644 index 000000000000..2e8e8b9b9cef --- /dev/null +++ b/arch/sh/kernel/iomap.c @@ -0,0 +1,165 @@ +/* + * arch/sh/kernel/iomap.c + * + * Copyright (C) 2000 Niibe Yutaka + * Copyright (C) 2005 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +unsigned int ioread8(void __iomem *addr) +{ + return readb(addr); +} +EXPORT_SYMBOL(ioread8); + +unsigned int ioread16(void __iomem *addr) +{ + return readw(addr); +} +EXPORT_SYMBOL(ioread16); + +unsigned int ioread16be(void __iomem *addr) +{ + return be16_to_cpu(__raw_readw(addr)); +} +EXPORT_SYMBOL(ioread16be); + +unsigned int ioread32(void __iomem *addr) +{ + return readl(addr); +} +EXPORT_SYMBOL(ioread32); + +unsigned int ioread32be(void __iomem *addr) +{ + return be32_to_cpu(__raw_readl(addr)); +} +EXPORT_SYMBOL(ioread32be); + +void iowrite8(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} +EXPORT_SYMBOL(iowrite8); + +void iowrite16(u16 val, void __iomem *addr) +{ + writew(val, addr); +} +EXPORT_SYMBOL(iowrite16); + +void iowrite16be(u16 val, void __iomem *addr) +{ + __raw_writew(cpu_to_be16(val), addr); +} +EXPORT_SYMBOL(iowrite16be); + +void iowrite32(u32 val, void __iomem *addr) +{ + writel(val, addr); +} +EXPORT_SYMBOL(iowrite32); + +void iowrite32be(u32 val, void __iomem *addr) +{ + __raw_writel(cpu_to_be32(val), addr); +} +EXPORT_SYMBOL(iowrite32be); + +/* + * These are the "repeat MMIO read/write" functions. + * Note the "__raw" accesses, since we don't want to + * convert to CPU byte order. We write in "IO byte + * order" (we also don't have IO barriers). + */ +static inline void mmio_insb(void __iomem *addr, u8 *dst, int count) +{ + while (--count >= 0) { + u8 data = __raw_readb(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_insw(void __iomem *addr, u16 *dst, int count) +{ + while (--count >= 0) { + u16 data = __raw_readw(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_insl(void __iomem *addr, u32 *dst, int count) +{ + while (--count >= 0) { + u32 data = __raw_readl(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count) +{ + while (--count >= 0) { + __raw_writeb(*src, addr); + src++; + } +} + +static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count) +{ + while (--count >= 0) { + __raw_writew(*src, addr); + src++; + } +} + +static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count) +{ + while (--count >= 0) { + __raw_writel(*src, addr); + src++; + } +} + +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insb(addr, dst, count); +} +EXPORT_SYMBOL(ioread8_rep); + +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insw(addr, dst, count); +} +EXPORT_SYMBOL(ioread16_rep); + +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insl(addr, dst, count); +} +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsb(addr, src, count); +} +EXPORT_SYMBOL(iowrite8_rep); + +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsw(addr, src, count); +} +EXPORT_SYMBOL(iowrite16_rep); + +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsl(addr, src, count); +} +EXPORT_SYMBOL(iowrite32_rep); diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c new file mode 100644 index 000000000000..e3ad6103e7c1 --- /dev/null +++ b/arch/sh/kernel/ioport.c @@ -0,0 +1,43 @@ +/* + * arch/sh/kernel/ioport.c + * + * Copyright (C) 2000 Niibe Yutaka + * Copyright (C) 2005 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +const unsigned long sh_io_port_base __read_mostly = -1; +EXPORT_SYMBOL(sh_io_port_base); + +void __iomem *__ioport_map(unsigned long addr, unsigned int size) +{ + if (sh_mv.mv_ioport_map) + return sh_mv.mv_ioport_map(addr, size); + + return (void __iomem *)(addr + sh_io_port_base); +} +EXPORT_SYMBOL(__ioport_map); + +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + void __iomem *ret; + + ret = __ioport_map_trapped(port, nr); + if (ret) + return ret; + + return __ioport_map(port, nr); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + if (sh_mv.mv_ioport_unmap) + sh_mv.mv_ioport_unmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index 9f9bb63616ad..3d722e49db08 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -118,28 +118,6 @@ void __init sh_mv_setup(void) sh_mv.mv_##elem = generic_##elem; \ } while (0) -#ifdef CONFIG_HAS_IOPORT - -#ifdef P2SEG - __set_io_port_base(P2SEG); -#else - __set_io_port_base(0); -#endif - - mv_set(inb); mv_set(inw); mv_set(inl); - mv_set(outb); mv_set(outw); mv_set(outl); - - mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); - mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); - - mv_set(insb); mv_set(insw); mv_set(insl); - mv_set(outsb); mv_set(outsw); mv_set(outsl); - - mv_set(ioport_map); - mv_set(ioport_unmap); - -#endif - mv_set(irq_demux); mv_set(mode_pins); mv_set(mem_init);