From: Bruce Allan Date: Tue, 2 Jun 2009 11:29:37 +0000 (+0000) Subject: e1000e: workaround a Tx hang on 82577/82578 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=37289d9c1e72a186ea5f28bee79efeb1d4e7309c;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git e1000e: workaround a Tx hang on 82577/82578 With bi-directional stress traffic, the receiver could hang causing the hardware to stop and a "Detected Tx Unit Hang" message dumped to the system logfile. Temporarily workaround this issue by disabling Tx flow control by default. The issue is currently being investigated and a follow-on patch will be provided to revert this when it is resolved. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index b69c8190da30..9e23f50fb9cd 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2348,8 +2348,13 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) * the default flow control setting, so we explicitly * set it to full. */ - if (hw->fc.requested_mode == e1000_fc_default) - hw->fc.requested_mode = e1000_fc_full; + if (hw->fc.requested_mode == e1000_fc_default) { + /* Workaround h/w hang when Tx flow control enabled */ + if (hw->mac.type == e1000_pchlan) + hw->fc.requested_mode = e1000_fc_rx_pause; + else + hw->fc.requested_mode = e1000_fc_full; + } /* * Save off the requested flow control mode for use later. Depending