From: Vince Bridgers Date: Mon, 20 Jan 2014 11:39:00 +0000 (-0600) Subject: dts: Add a binding for Synopsys emac max-frame-size X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=369ea818bc185815319f80248f780d42434b52bc;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git dts: Add a binding for Synopsys emac max-frame-size This change adds a parameter for the Synopsys 10/100/1000 stmmac Ethernet driver to configure the maximum frame size supported by the EMAC driver. Synopsys allows the FIFO sizes to be configured when the cores are built for a particular device, but do not provide a way for the driver to read information from the device about the maximum MTU size supported as limited by the device's FIFO size. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index aefb63949619..9d92d42140f2 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -32,6 +32,8 @@ Optional properties: - resets: Should contain a phandle to the STMMAC reset signal, if any - reset-names: Should contain the reset signal name "stmmaceth", if a reset phandle is given +- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather + than the maximum frame size. Examples: @@ -42,5 +44,6 @@ Examples: interrupts = <24 23>; interrupt-names = "macirq", "eth_wake_irq"; mac-address = [000000000000]; /* Filled in by U-Boot */ + max-frame-size = <3800>; phy-mode = "gmii"; };