From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 15 Nov 2013 07:35:18 +0000 (+0530)
Subject: ath9k: Fix Carrier Leak calibration for SoC chips
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=34d9b6893405c5afaf9d906062feae15ccfbcb28;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

ath9k: Fix Carrier Leak calibration for SoC chips

CL calibration is applicable for all chips and the
enable/disable knob comes via the INI file. For PCOEM
chips, the calibration data is reused when Fast Channel Change
is used. Caldata reuse is not enabled for SoC chips, so remove
the CL post processing code.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 347b002938ed..58eacf12db83 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1236,20 +1236,13 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 	bool txiqcal_done = false;
 	bool is_reusable = true, status = true;
 	bool run_agc_cal = false, sep_iq_cal = false;
-	u32 rx_delay = 0;
 
 	/* Use chip chainmask only for calibration */
 	ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
 
 	if (ah->enabled_cals & TX_CL_CAL) {
-		if (caldata && test_bit(TXCLCAL_DONE, &caldata->cal_flags))
-			REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL,
-				    AR_PHY_CL_CAL_ENABLE);
-		else {
-			REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL,
-				    AR_PHY_CL_CAL_ENABLE);
-			run_agc_cal = true;
-		}
+		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
+		run_agc_cal = true;
 	}
 
 	if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))
@@ -1285,15 +1278,6 @@ skip_tx_iqcal:
 		REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
 	}
 
-	if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) {
-		rx_delay = REG_READ(ah, AR_PHY_RX_DELAY);
-		/* Disable BB_active */
-		REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
-		udelay(5);
-		REG_WRITE(ah, AR_PHY_RX_DELAY, AR_PHY_RX_DELAY_DELAY);
-		REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
-	}
-
 	if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
 		/* Calibrate the AGC */
 		REG_WRITE(ah, AR_PHY_AGC_CONTROL,
@@ -1306,11 +1290,6 @@ skip_tx_iqcal:
 				       0, AH_WAIT_TIMEOUT);
 	}
 
-	if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) {
-		REG_WRITE(ah, AR_PHY_RX_DELAY, rx_delay);
-		udelay(5);
-	}
-
 	if (!status) {
 		ath_dbg(common, CALIBRATE,
 			"offset calibration failed to complete in %d ms; noisy environment?\n",
@@ -1323,8 +1302,6 @@ skip_tx_iqcal:
 	else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags))
 		ar9003_hw_tx_iq_cal_reload(ah);
 
-	ar9003_hw_cl_cal_post_proc(ah, is_reusable);
-
 	/* Revert chainmask to runtime parameters */
 	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index d39b79f5e841..39b71b3d6919 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -641,11 +641,12 @@ static void ar9003_hw_override_ini(struct ath_hw *ah)
 		else
 			ah->enabled_cals &= ~TX_IQ_CAL;
 
-		if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE)
-			ah->enabled_cals |= TX_CL_CAL;
-		else
-			ah->enabled_cals &= ~TX_CL_CAL;
 	}
+
+	if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE)
+		ah->enabled_cals |= TX_CL_CAL;
+	else
+		ah->enabled_cals &= ~TX_CL_CAL;
 }
 
 static void ar9003_hw_prog_ini(struct ath_hw *ah,