From: Jaehoon Chung Date: Mon, 21 Nov 2016 04:58:39 +0000 (+0900) Subject: arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=34d05111226b5fd168e5763455639c91e45d71a8;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash Add the mshc_2 node for supporting T-Flash. Also add the "mshc*" aliases. dwmmc driver should be assigned to "ctrl_id" after parsing to "mshc". If there are no aliases for mshc, then it might be set to the wrong capabilities. Signed-off-by: Jaehoon Chung Signed-off-by: Krzysztof Kozlowski --- diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index ce4178126272..88cb6c109e21 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -45,6 +45,8 @@ spi2 = &spi_2; spi3 = &spi_3; spi4 = &spi_4; + mshc0 = &mshc_0; + mshc2 = &mshc_2; }; chosen { @@ -715,6 +717,23 @@ assigned-clock-rates = <800000000>; }; +&mshc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; +}; + &pinctrl_alive { pinctrl-names = "default"; pinctrl-0 = <&initial_alive>;