From: Bartlomiej Zolnierkiewicz Date: Thu, 13 Nov 2014 15:00:59 +0000 (+0100) Subject: thermal: exynos: remove needless triminfo_ctrl abstraction X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=32f9520569ed6bf75673063b8b1c4f2e46a75c48;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git thermal: exynos: remove needless triminfo_ctrl abstraction reg->triminfo_ctrl[] is used in only exynos_tmu_initialize() and accessed only if TMU_SUPPORT_TRIM_RELOAD flag is set. This flag is set only on Exynos3250, Exynos4412 and Exynos5250 (other SoC types don't even have triminfo_ctrl[] entries assigned in their struct exynos_tmu_registers instances) so the register abstraction is not needed and can be removed. There should be no functional changes caused by this patch. Cc: Amit Daniel Kachhap Cc: Lukasz Majewski Cc: Eduardo Valentin Cc: Zhang Rui Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Tested-by: Lukasz Majewski Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 158f5aa8dc5d..cd4471925cdd 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,6 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 12e6f16d75c7..160e7fa5e1bc 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -162,15 +162,14 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { - for (i = 0; i < reg->triminfo_ctrl_count; i++) { - if (pdata->triminfo_reload[i]) { - ctrl = readl(data->base + - reg->triminfo_ctrl[i]); - ctrl |= pdata->triminfo_reload[i]; - writel(ctrl, data->base + - reg->triminfo_ctrl[i]); - } + if (data->soc == SOC_ARCH_EXYNOS3250) { + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); } + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); } /* Save trimming info in order to perform calibration */ diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index d69321579140..cee81a1de8e3 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -76,8 +76,6 @@ enum soc_type { * struct exynos_tmu_register - register descriptors to access registers and * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. - * @triminfo_ctrl: trim info controller register. - * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. @@ -104,9 +102,6 @@ enum soc_type { * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { - u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; - u32 triminfo_ctrl_count; - u32 tmu_ctrl; u32 test_mux_addr_shift; u32 therm_trip_mode_shift; @@ -184,7 +179,6 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX - * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may @@ -215,7 +209,6 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; - u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; enum soc_type type; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 8153c41b9725..d4b9a68e803d 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -82,9 +82,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS3250) static const struct exynos_tmu_registers exynos3250_tmu_registers = { - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, - .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 2, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -140,8 +137,6 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ - .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos3250_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ @@ -163,8 +158,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -221,7 +214,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \