From: Giuseppe CAVALLARO Date: Mon, 8 Apr 2013 02:10:00 +0000 (+0000) Subject: stmmac: improve/review and fix kernel-doc X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=32ceabcad3c8abd46de033778497c2e77a097554;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git stmmac: improve/review and fix kernel-doc this patch reviews/improves and adds some fixes in the code doc. Also kernel-doc passes w/o any warnings. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 3ac9bd7b0781..77f36225062b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -81,14 +81,14 @@ #define JUMBO_LEN 9000 /* Module parameters */ -#define TX_TIMEO 5000 /* default 5 seconds */ +#define TX_TIMEO 5000 static int watchdog = TX_TIMEO; module_param(watchdog, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds (default 5s)"); -static int debug = -1; /* -1: default, 0: no output, 16: all */ +static int debug = -1; module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); +MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); int phyaddr = -1; module_param(phyaddr, int, S_IRUGO); @@ -173,6 +173,18 @@ static void stmmac_verify_args(void) eee_timer = STMMAC_DEFAULT_LPI_TIMER; } +/** + * stmmac_clk_csr_set - dynamically set the MDC clock + * @priv: driver private structure + * Description: this is to dynamically set the MDC clock according to the csr + * clock input. + * Note: + * If a specific clk_csr value is passed from the platform + * this means that the CSR Clock Range selection cannot be + * changed at run-time and it is fixed (as reported in the driver + * documentation). Viceversa the driver will try to set the MDC + * clock dynamically according to the actual clock input. + */ static void stmmac_clk_csr_set(struct stmmac_priv *priv) { u32 clk_rate; @@ -222,8 +234,11 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; } -/* On some ST platforms, some HW system configuraton registers have to be - * set according to the link speed negotiated. +/** + * stmmac_hw_fix_mac_speed: callback for speed selection + * @priv: driver private structure + * Description: on some platforms (e.g. ST), some HW system configuraton + * registers have to be set according to the link speed negotiated. */ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) { @@ -234,6 +249,11 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) phydev->speed); } +/** + * stmmac_enable_eee_mode: Check and enter in LPI mode + * @priv: driver private structure + * Description: this function is to verify and enter in LPI mode for EEE. + */ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) { /* Check and enter in LPI mode */ @@ -242,19 +262,24 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) priv->hw->mac->set_eee_mode(priv->ioaddr); } +/** + * stmmac_disable_eee_mode: disable/exit from EEE + * @priv: driver private structure + * Description: this function is to exit and disable EEE in case of + * LPI state is true. This is called by the xmit. + */ void stmmac_disable_eee_mode(struct stmmac_priv *priv) { - /* Exit and disable EEE in case of we are are in LPI state. */ priv->hw->mac->reset_eee_mode(priv->ioaddr); del_timer_sync(&priv->eee_ctrl_timer); priv->tx_path_in_lpi_mode = false; } /** - * stmmac_eee_ctrl_timer + * stmmac_eee_ctrl_timer: EEE TX SW timer. * @arg : data hook * Description: - * If there is no data transfer and if we are not in LPI state, + * if there is no data transfer and if we are not in LPI state, * then MAC Transmitter can be moved to LPI state. */ static void stmmac_eee_ctrl_timer(unsigned long arg) @@ -266,8 +291,8 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) } /** - * stmmac_eee_init - * @priv: private device pointer + * stmmac_eee_init: init EEE + * @priv: driver private structure * Description: * If the EEE support has been enabled while configuring the driver, * if the GMAC actually supports the EEE (from the HW cap reg) and the @@ -303,18 +328,22 @@ out: return ret; } +/** + * stmmac_eee_adjust: adjust HW EEE according to the speed + * @priv: driver private structure + * Description: + * When the EEE has been already initialised we have to + * modify the PLS bit in the LPI ctrl & status reg according + * to the PHY link status. For this reason. + */ static void stmmac_eee_adjust(struct stmmac_priv *priv) { - /* When the EEE has been already initialised we have to - * modify the PLS bit in the LPI ctrl & status reg according - * to the PHY link status. For this reason. - */ if (priv->eee_enabled) priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link); } -/* stmmac_get_tx_hwtstamp: - * @priv : pointer to private device structure. +/* stmmac_get_tx_hwtstamp: get HW TX timestamps + * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer * Description : @@ -356,8 +385,8 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, return; } -/* stmmac_get_rx_hwtstamp: - * @priv : pointer to private device structure. +/* stmmac_get_rx_hwtstamp: get HW RX timestamps + * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer * Description : @@ -618,6 +647,13 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) sizeof(struct hwtstamp_config)) ? -EFAULT : 0; } +/** + * stmmac_init_ptp: init PTP + * @priv: driver private structure + * Description: this is to verify if the HW supports the PTPv1 or v2. + * This is done by looking at the HW cap. register. + * Also it registers the ptp driver. + */ static int stmmac_init_ptp(struct stmmac_priv *priv) { if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp)) @@ -740,6 +776,13 @@ static void stmmac_adjust_link(struct net_device *dev) DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); } +/** + * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported + * @priv: driver private structure + * Description: this is to verify if the HW supports the PCS. + * Physical Coding Sublayer (PCS) interface that can be used when the MAC is + * configured for the TBI, RTBI, or SGMII PHY interface. + */ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) { int interface = priv->plat->interface; @@ -821,9 +864,10 @@ static int stmmac_init_phy(struct net_device *dev) } /** - * stmmac_display_ring - * @p: pointer to the ring. + * stmmac_display_ring: display ring + * @head: pointer to the head of the ring passed. * @size: size of the ring. + * @extend_desc: to verify if extended descriptors are used. * Description: display the control/status and buffer descriptors. */ static void stmmac_display_ring(void *head, int size, int extend_desc) @@ -887,6 +931,12 @@ static int stmmac_set_bfsize(int mtu, int bufsize) return ret; } +/** + * stmmac_clear_descriptors: clear descriptors + * @priv: driver private structure + * Description: this function is called to clear the tx and rx descriptors + * in case of both basic and extended descriptors are used. + */ static void stmmac_clear_descriptors(struct stmmac_priv *priv) { int i; @@ -1129,7 +1179,7 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) /** * stmmac_dma_operation_mode - HW DMA operation mode - * @priv : pointer to the private device structure. + * @priv: driver private structure * Description: it sets the DMA operation mode: tx/rx DMA thresholds * or Store-And-Forward capability. */ @@ -1153,7 +1203,7 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) /** * stmmac_tx_clean: - * @priv: private data pointer + * @priv: driver private structure * Description: it reclaims resources after transmission completes. */ static void stmmac_tx_clean(struct stmmac_priv *priv) @@ -1245,8 +1295,8 @@ static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv) /** - * stmmac_tx_err: - * @priv: pointer to the private device structure + * stmmac_tx_err: irq tx error mng function + * @priv: driver private structure * Description: it cleans the descriptors and restarts the transmission * in case of errors. */ @@ -1275,6 +1325,14 @@ static void stmmac_tx_err(struct stmmac_priv *priv) netif_wake_queue(priv->dev); } +/** + * stmmac_dma_interrupt: DMA ISR + * @priv: driver private structure + * Description: this is the DMA ISR. It is called by the main ISR. + * It calls the dwmac dma routine to understand which type of interrupt + * happened. In case of there is a Normal interrupt and either TX or RX + * interrupt happened so the NAPI is scheduled. + */ static void stmmac_dma_interrupt(struct stmmac_priv *priv) { int status; @@ -1297,13 +1355,16 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv) stmmac_tx_err(priv); } +/** + * stmmac_mmc_setup: setup the Mac Management Counters (MMC) + * @priv: driver private structure + * Description: this masks the MMC irq, in fact, the counters are managed in SW. + */ static void stmmac_mmc_setup(struct stmmac_priv *priv) { unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - /* Mask MMC irq, counters are managed in SW and registers - * are cleared on each READ eventually. */ dwmac_mmc_intr_all_mask(priv->ioaddr); if (priv->dma_cap.rmon) { @@ -1332,9 +1393,11 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) } /** - * stmmac_selec_desc_mode - * @priv : private structure - * Description: select the Enhanced/Alternate or Normal descriptors + * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors + * @priv: driver private structure + * Description: select the Enhanced/Alternate or Normal descriptors. + * In case of Enhanced/Alternate, it looks at the extended descriptors are + * supported by the HW cap. register. */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { @@ -1356,8 +1419,8 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) } /** - * stmmac_get_hw_features - * @priv : private device pointer + * stmmac_get_hw_features: get MAC capabilities from the HW cap. register. + * @priv: driver private structure * Description: * new GMAC chip generations have a new register to indicate the * presence of the optional feature/functions. @@ -1415,10 +1478,15 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) return hw_cap; } +/** + * stmmac_check_ether_addr: check if the MAC addr is valid + * @priv: driver private structure + * Description: + * it is to verify if the MAC address is valid, in case of failures it + * generates a random MAC address + */ static void stmmac_check_ether_addr(struct stmmac_priv *priv) { - /* verify if the MAC address is valid, in case of failures it - * generates a random MAC address */ if (!is_valid_ether_addr(priv->dev->dev_addr)) { priv->hw->mac->get_umac_addr((void __iomem *) priv->dev->base_addr, @@ -1430,15 +1498,20 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv) priv->dev->dev_addr); } +/** + * stmmac_init_dma_engine: DMA init. + * @priv: driver private structure + * Description: + * It inits the DMA invoking the specific MAC/GMAC callback. + * Some DMA parameters can be passed from the platform; + * in case of these are not passed a default is kept for the MAC or GMAC. + */ static int stmmac_init_dma_engine(struct stmmac_priv *priv) { int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0; int mixed_burst = 0; int atds = 0; - /* Some DMA parameters can be passed from the platform; - * in case of these are not passed we keep a default - * (good for all the chips) and init the DMA! */ if (priv->plat->dma_cfg) { pbl = priv->plat->dma_cfg->pbl; fixed_burst = priv->plat->dma_cfg->fixed_burst; @@ -1455,7 +1528,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } /** - * stmmac_tx_timer: + * stmmac_tx_timer: mitigation sw timer for tx. * @data: data pointer * Description: * This is the timer handler to directly invoke the stmmac_tx_clean. @@ -1468,8 +1541,8 @@ static void stmmac_tx_timer(unsigned long data) } /** - * stmmac_tx_timer: - * @priv: private data structure + * stmmac_init_tx_coalesce: init tx mitigation options. + * @priv: driver private structure * Description: * This inits the transmit coalesce parameters: i.e. timer rate, * timer handler and default threshold used for enabling the @@ -1699,10 +1772,12 @@ static int stmmac_release(struct net_device *dev) } /** - * stmmac_xmit: + * stmmac_xmit: Tx entry point of the driver * @skb : the socket buffer * @dev : device pointer - * Description : Tx entry point of the driver. + * Description : this is the tx entry point of the driver. + * It programs the chain or the ring and supports oversized frames + * and SG feature. */ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -1868,6 +1943,12 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +/** + * stmmac_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * Description : this is to reallocate the skb for the reception process + * that is based on zero-copy. + */ static inline void stmmac_rx_refill(struct stmmac_priv *priv) { unsigned int rxsize = priv->dma_rx_size; @@ -1907,6 +1988,13 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) } } +/** + * stmmac_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * @limit: napi bugget. + * Description : this the function called by the napi poll method. + * It gets all the frames inside the ring. + */ static int stmmac_rx(struct stmmac_priv *priv, int limit) { unsigned int rxsize = priv->dma_rx_size; @@ -2170,6 +2258,14 @@ static netdev_features_t stmmac_fix_features(struct net_device *dev, return features; } +/** + * stmmac_interrupt - main ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the main driver interrupt service routine. + * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI + * interrupts. + */ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -2218,7 +2314,7 @@ static void stmmac_poll_controller(struct net_device *dev) * a proprietary structure used to pass information to the driver. * @cmd: IOCTL command * Description: - * Currently it supports just the phy_mii_ioctl(...) and HW time stamping. + * Currently it supports the phy_mii_ioctl(...) and HW time stamping. */ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { @@ -2451,7 +2547,7 @@ static const struct net_device_ops stmmac_netdev_ops = { /** * stmmac_hw_init - Init the MAC device - * @priv : pointer to the private device structure. + * @priv: driver private structure * Description: this function detects which MAC device * (GMAC/MAC10-100) has to attached, checks the HW capability * (if supported) and sets the driver's features (for example diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c index 93d4beff92c7..b8b0eeed0f92 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -174,9 +174,7 @@ static struct ptp_clock_info stmmac_ptp_clock_ops = { /** * stmmac_ptp_register - * - * @ndev: net device pointer - * + * @priv: driver private structure * Description: this function will register the ptp clock driver * to kernel. It also does some house keeping work. */ @@ -199,9 +197,7 @@ int stmmac_ptp_register(struct stmmac_priv *priv) /** * stmmac_ptp_unregister - * - * @ndev: net device pointer - * + * @priv: driver private structure * Description: this function will remove/unregister the ptp clock driver * from the kernel. */