From: Tim Harvey Date: Tue, 9 Sep 2014 06:07:28 +0000 (-0700) Subject: ARM: dts: imx: ventana: use gpio constants X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=326cdb16552c3670fefd583d94fe797e776130b6;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: dts: imx: ventana: use gpio constants Use the gpio contants defined in bindings for active high/low Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 035f2b17f386..9687cd82c2b6 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include #include "imx6q.dtsi" / { @@ -40,20 +41,20 @@ led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; @@ -64,7 +65,7 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 5 0>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -106,7 +107,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -134,7 +135,7 @@ &ecspi1 { fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -150,7 +151,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -331,8 +332,8 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; @@ -462,7 +463,7 @@ }; &pcie { - reset-gpio = <&gpio1 29 0>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; eth1: sky2@8 { /* MAC/PHY on bus 8 */ @@ -508,7 +509,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 482ef28885a1..fa2cae4d57d0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -9,6 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { /* these are used by bootloader for disabling nodes */ aliases { @@ -28,14 +30,14 @@ led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; }; @@ -46,7 +48,7 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,7 +81,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -89,7 +91,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -279,7 +281,7 @@ }; &pcie { - reset-gpio = <&gpio1 0 0>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index f8c4ab492d8e..53f4a0bd53ba 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -9,6 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { /* these are used by bootloader for disabling nodes */ aliases { @@ -37,20 +39,20 @@ led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -61,7 +63,7 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -113,7 +115,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -143,7 +145,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -226,8 +228,8 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; @@ -402,7 +404,7 @@ }; &pcie { - reset-gpio = <&gpio1 29 0>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -449,7 +451,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 01edfd997013..2074df6f8095 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -9,6 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { /* these are used by bootloader for disabling nodes */ aliases { @@ -38,20 +40,20 @@ led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -62,7 +64,7 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -114,7 +116,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -150,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -233,8 +235,8 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; - interrupts = <11 2>; /* gpio1_11 active low */ - wakeup-gpios = <&gpio1 11 0>; + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -418,7 +420,7 @@ }; &pcie { - reset-gpio = <&gpio1 29 0>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; eth1: sky2@8 { /* MAC/PHY on bus 8 */ @@ -470,7 +472,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index fab9c7a8f878..ab7827abd71b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -9,6 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { /* these are used by bootloader for disabling nodes */ aliases { @@ -38,20 +40,20 @@ led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -62,7 +64,7 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -104,7 +106,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -140,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -322,8 +324,8 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; @@ -501,7 +503,7 @@ }; &pcie { - reset-gpio = <&gpio1 29 0>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; eth1: sky2@8 { /* MAC/PHY on bus 8 */ @@ -557,7 +559,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; };