From: Steve Glendinning Date: Thu, 22 Nov 2012 08:05:25 +0000 (+0000) Subject: smsc95xx: refactor entering suspend modes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=319b95b5f47e2ee67782f39fbb2c7fbd2c60c631;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git smsc95xx: refactor entering suspend modes This patch splits out the logic for entering suspend modes to separate functions, to reduce the complexity of the smsc95xx_suspend function. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index e98ff8c77ec..bf8854386b8 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1130,6 +1130,102 @@ static int smsc95xx_link_ok_nopm(struct usbnet *dev) return !!(ret & BMSR_LSTATUS); } +static int smsc95xx_enter_suspend0(struct usbnet *dev) +{ + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + u32 val; + int ret; + + ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + check_warn_return(ret, "Error reading PM_CTRL"); + + val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_)); + val |= PM_CTL_SUS_MODE_0; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + check_warn_return(ret, "Error writing PM_CTRL"); + + /* clear wol status */ + val &= ~PM_CTL_WUPS_; + val |= PM_CTL_WUPS_WOL_; + + /* enable energy detection */ + if (pdata->wolopts & WAKE_PHY) + val |= PM_CTL_WUPS_ED_; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + check_warn_return(ret, "Error writing PM_CTRL"); + + /* read back PM_CTRL */ + ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + check_warn_return(ret, "Error reading PM_CTRL"); + + smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP); + + return 0; +} + +static int smsc95xx_enter_suspend1(struct usbnet *dev) +{ + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + struct mii_if_info *mii = &dev->mii; + u32 val; + int ret; + + /* reconfigure link pulse detection timing for + * compatibility with non-standard link partners + */ + if (pdata->features & FEATURE_PHY_NLP_CROSSOVER) + smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_EDPD_CONFIG, + PHY_EDPD_CONFIG_DEFAULT); + + /* enable energy detect power-down mode */ + ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS); + check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS"); + + ret |= MODE_CTRL_STS_EDPWRDOWN_; + + smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS, ret); + + /* enter SUSPEND1 mode */ + ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + check_warn_return(ret, "Error reading PM_CTRL"); + + val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); + val |= PM_CTL_SUS_MODE_1; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + check_warn_return(ret, "Error writing PM_CTRL"); + + /* clear wol status, enable energy detection */ + val &= ~PM_CTL_WUPS_; + val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_); + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + check_warn_return(ret, "Error writing PM_CTRL"); + + smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP); + + return 0; +} + +static int smsc95xx_enter_suspend2(struct usbnet *dev) +{ + u32 val; + int ret; + + ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + check_warn_return(ret, "Error reading PM_CTRL"); + + val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); + val |= PM_CTL_SUS_MODE_2; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + check_warn_return(ret, "Error writing PM_CTRL"); + + return 0; +} + static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) { struct usbnet *dev = usb_get_intfdata(intf); @@ -1167,17 +1263,7 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); check_warn_return(ret, "Error writing PM_CTRL"); - /* enter suspend2 mode */ - ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - check_warn_return(ret, "Error reading PM_CTRL"); - - val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); - val |= PM_CTL_SUS_MODE_2; - - ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - check_warn_return(ret, "Error writing PM_CTRL"); - - return 0; + return smsc95xx_enter_suspend2(dev); } if (pdata->wolopts & WAKE_PHY) { @@ -1189,47 +1275,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) * otherwise enter SUSPEND0 below */ if (!link_up) { - struct mii_if_info *mii = &dev->mii; netdev_info(dev->net, "entering SUSPEND1 mode"); - - /* reconfigure link pulse detection timing for - * compatibility with non-standard link partners - */ - if (pdata->features & FEATURE_PHY_NLP_CROSSOVER) - smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, - PHY_EDPD_CONFIG, - PHY_EDPD_CONFIG_DEFAULT); - - /* enable energy detect power-down mode */ - ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, - PHY_MODE_CTRL_STS); - check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS"); - - ret |= MODE_CTRL_STS_EDPWRDOWN_; - - smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, - PHY_MODE_CTRL_STS, ret); - - /* enter SUSPEND1 mode */ - ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - check_warn_return(ret, "Error reading PM_CTRL"); - - val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); - val |= PM_CTL_SUS_MODE_1; - - ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - check_warn_return(ret, "Error writing PM_CTRL"); - - /* clear wol status, enable energy detection */ - val &= ~PM_CTL_WUPS_; - val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_); - - ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - check_warn_return(ret, "Error writing PM_CTRL"); - - smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP); - - return 0; + return smsc95xx_enter_suspend1(dev); } } @@ -1383,34 +1430,7 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) /* some wol options are enabled, so enter SUSPEND0 */ netdev_info(dev->net, "entering SUSPEND0 mode"); - - ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - check_warn_return(ret, "Error reading PM_CTRL"); - - val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_)); - val |= PM_CTL_SUS_MODE_0; - - ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - check_warn_return(ret, "Error writing PM_CTRL"); - - /* clear wol status */ - val &= ~PM_CTL_WUPS_; - val |= PM_CTL_WUPS_WOL_; - - /* enable energy detection */ - if (pdata->wolopts & WAKE_PHY) - val |= PM_CTL_WUPS_ED_; - - ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - check_warn_return(ret, "Error writing PM_CTRL"); - - /* read back PM_CTRL */ - ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - check_warn_return(ret, "Error reading PM_CTRL"); - - smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP); - - return 0; + return smsc95xx_enter_suspend0(dev); } static int smsc95xx_resume(struct usb_interface *intf)