From: Martin Bugge Date: Wed, 19 Mar 2014 09:43:45 +0000 (-0300) Subject: [media] adv7842: Disable access to EDID DDC lines before chip power up X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2ff0f16ded0843e32acdbc683f9a04f07765987c;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [media] adv7842: Disable access to EDID DDC lines before chip power up In core_init make sure access to EDID DDC lines are disabled before chip is powered up. Also DISABLE_AUTO_EDID before power up. The correct setting is applied later when setting the EDID. Some sources (MAC) kept on reading EDID even when Hotplug was low and in the short period in core_init before the DDC lines was enabled read a corrupt EDID. Signed-off-by: Martin Bugge Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 5d79c57f65d4..06c25c3fa3a9 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -2611,6 +2611,12 @@ static int adv7842_core_init(struct v4l2_subdev *sd) disable_input(sd); + /* + * Disable I2C access to internal EDID ram from HDMI DDC ports + * Disable auto edid enable when leaving powerdown mode + */ + rep_write_and_or(sd, 0x77, 0xd3, 0x20); + /* power */ io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ io_write(sd, 0x15, 0x80); /* Power up pads */ @@ -2691,9 +2697,6 @@ static int adv7842_core_init(struct v4l2_subdev *sd) enable_input(sd); - /* disable I2C access to internal EDID ram from HDMI DDC ports */ - rep_write_and_or(sd, 0x77, 0xf3, 0x00); - if (pdata->hpa_auto) { /* HPA auto, HPA 0.5s after Edid set and Cable detect */ hdmi_write(sd, 0x69, 0x5c);