From: Ulf Hansson Date: Wed, 25 Jan 2017 09:25:01 +0000 (+0100) Subject: mmc: core: Clarify usage of mmc_set_signal_voltage() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2ed573b603f78289dd1435c94597aa25a97e2b76;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mmc: core: Clarify usage of mmc_set_signal_voltage() The mmc_set_signal_voltage() function is used for SD/SDIO when switching to 1.8V for UHS mode. To clarify this let's do the following changes. - We are always providing MMC_SIGNAL_VOLTAGE_180 as the signal_voltage parameter to the function. Then, let's just remove the parameter as it serves no purpose. - Rename the function to mmc_set_uhs_voltage(). Signed-off-by: Ulf Hansson Reviewed-by: Shawn Lin Tested-by: Jan Glauber Tested-by: Stefan Wahren --- diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index bb819d49291e..82c1a02b9c2a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1647,7 +1647,7 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) } -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) { struct mmc_command cmd = {}; int err = 0; @@ -1691,7 +1691,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) host->ios.clock = 0; mmc_set_ios(host); - if (__mmc_set_signal_voltage(host, signal_voltage)) { + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) { /* * Voltages may not have been switched, but we've already * sent CMD11, so a power cycle is required anyway diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 8a95c82554be..aee23f54a7ed 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -48,7 +48,7 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr); +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr); int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); void mmc_set_timing(struct mmc_host *host, unsigned int timing); void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8b4f13943712..89531b48ae84 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -788,8 +788,7 @@ try_again: */ if (!mmc_host_is_spi(host) && rocr && ((*rocr & 0x41000000) == 0x41000000)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - pocr); + err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; goto try_again; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 261c88632c43..a64a8709ec72 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -642,8 +642,7 @@ try_again: * to make sure which speed mode should work. */ if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - ocr_card); + err = mmc_set_uhs_voltage(host, ocr_card); if (err == -EAGAIN) { mmc_sdio_resend_if_cond(host, card); retries--;