From: John Youn <johnyoun@synopsys.com>
Date: Fri, 20 May 2016 23:34:26 +0000 (-0700)
Subject: usb: dwc3: Use the correct speed macros for DSTS/DCFG
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2da9ad761e70c6a22e3a84f9a3e67faeef122a58;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

usb: dwc3: Use the correct speed macros for DSTS/DCFG

Correct the use of the DWC3_DSTS_XXX_SPEED and DWC3_DCFG_XXX_SPEED
macros. The wrong set of macros were being used in a few places.

This is only a cosmetic change as the values for both sets are
identical.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d0f74583c955..0c11fd6e305e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1672,16 +1672,16 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 	} else {
 		switch (dwc->maximum_speed) {
 		case USB_SPEED_LOW:
-			reg |= DWC3_DSTS_LOWSPEED;
+			reg |= DWC3_DCFG_LOWSPEED;
 			break;
 		case USB_SPEED_FULL:
-			reg |= DWC3_DSTS_FULLSPEED1;
+			reg |= DWC3_DCFG_FULLSPEED1;
 			break;
 		case USB_SPEED_HIGH:
-			reg |= DWC3_DSTS_HIGHSPEED;
+			reg |= DWC3_DCFG_HIGHSPEED;
 			break;
 		case USB_SPEED_SUPER_PLUS:
-			reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+			reg |= DWC3_DCFG_SUPERSPEED_PLUS;
 			break;
 		default:
 			dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
@@ -2459,12 +2459,12 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	dwc3_update_ram_clk_sel(dwc, speed);
 
 	switch (speed) {
-	case DWC3_DCFG_SUPERSPEED_PLUS:
+	case DWC3_DSTS_SUPERSPEED_PLUS:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
 		break;
-	case DWC3_DCFG_SUPERSPEED:
+	case DWC3_DSTS_SUPERSPEED:
 		/*
 		 * WORKAROUND: DWC3 revisions <1.90a have an issue which
 		 * would cause a missing USB3 Reset event.
@@ -2485,18 +2485,18 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER;
 		break;
-	case DWC3_DCFG_HIGHSPEED:
+	case DWC3_DSTS_HIGHSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_HIGH;
 		break;
-	case DWC3_DCFG_FULLSPEED2:
-	case DWC3_DCFG_FULLSPEED1:
+	case DWC3_DSTS_FULLSPEED2:
+	case DWC3_DSTS_FULLSPEED1:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_FULL;
 		break;
-	case DWC3_DCFG_LOWSPEED:
+	case DWC3_DSTS_LOWSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
 		dwc->gadget.ep0->maxpacket = 8;
 		dwc->gadget.speed = USB_SPEED_LOW;
@@ -2506,8 +2506,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	/* Enable USB2 LPM Capability */
 
 	if ((dwc->revision > DWC3_REVISION_194A) &&
-	    (speed != DWC3_DCFG_SUPERSPEED) &&
-	    (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
+	    (speed != DWC3_DSTS_SUPERSPEED) &&
+	    (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
 		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 		reg |= DWC3_DCFG_LPM_CAP;
 		dwc3_writel(dwc->regs, DWC3_DCFG, reg);