From: Mark Rustad Date: Fri, 1 Apr 2016 19:18:35 +0000 (-0700) Subject: ixgbe: Add support for SFPs with retimer X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2d40cd1720cb6eb4406b80866c08d97b92595dfe;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git ixgbe: Add support for SFPs with retimer Add support for SFPs with an external retimer. Signed-off-by: Mark Rustad Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index eb93319337a1..93db4bf00dfe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -132,6 +132,7 @@ static const struct pci_device_id ixgbe_pci_tbl[] = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP_N), board_x550em_a }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP), board_x550em_a }, /* required last entry */ {0, } }; @@ -2681,6 +2682,7 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, case ixgbe_mac_X550EM_x: case ixgbe_mac_x550em_a: if (adapter->hw.device_id == IXGBE_DEV_ID_X550EM_X_SFP || + adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP || adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) mask |= IXGBE_EIMS_GPI_SDP0(&adapter->hw); if (adapter->hw.phy.type == ixgbe_phy_x550em_ext_t) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 5abd66c84d00..cdf4c3800801 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2014 Intel Corporation. + Copyright(c) 1999 - 2016 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -81,7 +81,11 @@ #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 #define IXGBE_CS4227 0xBE /* CS4227 address */ +#define IXGBE_CS4227_GLOBAL_ID_LSB 0 +#define IXGBE_CS4227_GLOBAL_ID_MSB 1 #define IXGBE_CS4227_SCRATCH 2 +#define IXGBE_CS4223_PHY_ID 0x7003 /* Quad port */ +#define IXGBE_CS4227_PHY_ID 0x3003 /* Dual port */ #define IXGBE_CS4227_RESET_PENDING 0x1357 #define IXGBE_CS4227_RESET_COMPLETE 0x5AA5 #define IXGBE_CS4227_RETRIES 15 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 6b68e8ba1dce..fbbc13224657 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1311,6 +1311,7 @@ struct ixgbe_thermal_sensor_data { /* MDIO definitions */ +#define IXGBE_MDIO_ZERO_DEV_TYPE 0x0 #define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 #define IXGBE_MDIO_PCS_DEV_TYPE 0x3 #define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 @@ -3580,6 +3581,7 @@ struct ixgbe_info { #define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010) #define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C) #define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C) +#define IXGBE_KRM_AN_CNTL_8(P) ((P) ? 0x8248 : 0x4248) #define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634) #define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638) #define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00) @@ -3605,6 +3607,9 @@ struct ixgbe_info { #define IXGBE_KRM_AN_CNTL_1_SYM_PAUSE (1 << 28) #define IXGBE_KRM_AN_CNTL_1_ASM_PAUSE (1 << 29) +#define IXGBE_KRM_AN_CNTL_8_LINEAR BIT(0) +#define IXGBE_KRM_AN_CNTL_8_LIMITING BIT(1) + #define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6) #define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15) #define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 0d6cbb0af1a6..a9d86b37872c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -273,6 +273,12 @@ out: static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) { switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP: + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; @@ -1362,6 +1368,117 @@ i2c_err: return status; } +/** + * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP + * @hw: pointer to hardware structure + * + * Configure the the integrated PHY for native SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + bool setup_linear = false; + u32 reg_phy_int; + s32 rc; + + /* Check if SFP module is supported and linear */ + rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (rc == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (!rc) + return rc; + + /* Configure internal PHY for native SFI */ + rc = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + ®_phy_int); + if (rc) + return rc; + + if (setup_linear) { + reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LIMITING; + reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LINEAR; + } else { + reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LIMITING; + reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LINEAR; + } + + rc = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + reg_phy_int); + if (rc) + return rc; + + /* Setup XFI/SFI internal link */ + return ixgbe_setup_ixfi_x550em(hw, &speed); +} + +/** + * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP + * @hw: pointer to hardware structure + * + * Configure the the integrated PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + u32 reg_slice, slice_offset; + bool setup_linear = false; + u16 reg_phy_ext; + s32 rc; + + /* Check if SFP module is supported and linear */ + rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (rc == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (!rc) + return rc; + + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + if (!hw->phy.mdio.prtad || hw->phy.mdio.prtad == 0xFFFF) + return IXGBE_ERR_PHY_ADDR_INVALID; + + /* Get external PHY device id */ + rc = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + if (rc) + return rc; + + /* When configuring quad port CS4223, the MAC instance is part + * of the slice offset. + */ + if (reg_phy_ext == IXGBE_CS4223_PHY_ID) + slice_offset = (hw->bus.lan_id + + (hw->bus.instance_id << 1)) << 12; + else + slice_offset = hw->bus.lan_id << 12; + + /* Configure CS4227/CS4223 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; + if (setup_linear) + reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + return hw->phy.ops.write_reg(hw, reg_slice, IXGBE_MDIO_ZERO_DEV_TYPE, + reg_phy_ext); +} + /** * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed * @hw: pointer to hardware structure @@ -1456,9 +1573,21 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) mac->ops.disable_tx_laser = NULL; mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; - mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em; mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; mac->ops.setup_fc = ixgbe_setup_fc_x550em; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP_N: + mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n; + break; + case IXGBE_DEV_ID_X550EM_A_SFP: + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550a; + break; + default: + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550em; + break; + } mac->ops.set_rate_select_speed = ixgbe_set_soft_rate_select_speed; break; @@ -2253,6 +2382,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) media_type = ixgbe_media_type_backplane; break; case IXGBE_DEV_ID_X550EM_X_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP: case IXGBE_DEV_ID_X550EM_A_SFP_N: media_type = ixgbe_media_type_fiber; break; @@ -2316,6 +2446,7 @@ static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: /* Config MDIO clock speed before the first MDIO PHY access */ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); hlreg0 &= ~IXGBE_HLREG0_MDCSPD;