From: Andrzej Hajda Date: Wed, 1 Feb 2017 07:47:32 +0000 (+0100) Subject: drm/bridge/sii8620: initial support for eCBUS-S mode X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2c8fb853c063181bf80154e2fc3474d6f8c4a89c;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/bridge/sii8620: initial support for eCBUS-S mode The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex bidirectional traffic for three channels: - CBUS data (CBUS1 channel), - High-bandwidth MHL data (eMSC channel), - tunneling data (T-CBUS channel). It is required to fully support MHL3 dongles. Signed-off-by: Andrzej Hajda Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com --- diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index cde007489375..0d3716f3def3 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -104,6 +104,7 @@ static void sii8620_fetch_edid(struct sii8620 *ctx); static void sii8620_set_upstream_edid(struct sii8620 *ctx); static void sii8620_enable_hpd(struct sii8620 *ctx); static void sii8620_mhl_disconnected(struct sii8620 *ctx); +static void sii8620_disconnect(struct sii8620 *ctx); static int sii8620_clear_error(struct sii8620 *ctx) { @@ -1016,13 +1017,44 @@ static void sii8620_mhl_init(struct sii8620 *ctx) sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG); } +static void sii8620_emsc_enable(struct sii8620 *ctx) +{ + u8 reg; + + sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_EMSC_EN + | BIT_GENCTL_CLR_EMSC_RFIFO + | BIT_GENCTL_CLR_EMSC_XFIFO, ~0); + sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_CLR_EMSC_RFIFO + | BIT_GENCTL_CLR_EMSC_XFIFO, 0); + sii8620_setbits(ctx, REG_COMMECNT, BIT_COMMECNT_I2C_TO_EMSC_EN, ~0); + reg = sii8620_readb(ctx, REG_EMSCINTR); + sii8620_write(ctx, REG_EMSCINTR, reg); + sii8620_write(ctx, REG_EMSCINTRMASK, BIT_EMSCINTR_SPI_DVLD); +} + +static int sii8620_wait_for_fsm_state(struct sii8620 *ctx, u8 state) +{ + int i; + + for (i = 0; i < 10; ++i) { + u8 s = sii8620_readb(ctx, REG_COC_STAT_0); + + if ((s & MSK_COC_STAT_0_FSM_STATE) == state) + return 0; + if (!(s & BIT_COC_STAT_0_PLL_LOCKED)) + return -EBUSY; + usleep_range(4000, 6000); + } + return -ETIMEDOUT; +} + static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode) { + int ret; + if (ctx->mode == mode) return; - ctx->mode = mode; - switch (mode) { case CM_MHL1: sii8620_write_seq_static(ctx, @@ -1032,11 +1064,46 @@ static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode) | BIT_DPD_OSC_EN, REG_COC_INTR_MASK, 0 ); + ctx->mode = mode; break; case CM_MHL3: sii8620_write(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE); + ctx->mode = mode; + return; + case CM_ECBUS_S: + sii8620_emsc_enable(ctx); + sii8620_write_seq_static(ctx, + REG_TTXSPINUMS, 4, + REG_TRXSPINUMS, 4, + REG_TTXHSICNUMS, 0x14, + REG_TRXHSICNUMS, 0x14, + REG_TTXTOTNUMS, 0x18, + REG_TRXTOTNUMS, 0x18, + REG_PWD_SRST, BIT_PWD_SRST_COC_DOC_RST + | BIT_PWD_SRST_CBUS_RST_SW_EN, + REG_MHL_COC_CTL1, 0xbd, + REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN, + REG_COC_CTLB, 0x01, + REG_COC_CTL0, 0x5c, + REG_COC_CTL14, 0x03, + REG_COC_CTL15, 0x80, + REG_MHL_DP_CTL6, BIT_MHL_DP_CTL6_DP_TAP1_SGN + | BIT_MHL_DP_CTL6_DP_TAP1_EN + | BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN, + REG_MHL_DP_CTL8, 0x03 + ); + ret = sii8620_wait_for_fsm_state(ctx, 0x03); + sii8620_write_seq_static(ctx, + REG_COC_CTL14, 0x00, + REG_COC_CTL15, 0x80 + ); + if (!ret) + sii8620_write(ctx, REG_CBUS3_CNVT, 0x85); + else + sii8620_disconnect(ctx); return; case CM_DISCONNECTED: + ctx->mode = mode; break; default: dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode); @@ -1229,12 +1296,45 @@ static void sii8620_msc_mr_write_stat(struct sii8620 *ctx) sii8620_status_changed_path(ctx); } +static void sii8620_ecbus_up(struct sii8620 *ctx, int ret) +{ + if (ret < 0) + return; + + sii8620_set_mode(ctx, CM_ECBUS_S); +} + +static void sii8620_got_ecbus_speed(struct sii8620 *ctx, int ret) +{ + if (ret < 0) + return; + + sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE), + MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT); + sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP); + sii8620_mt_set_cont(ctx, sii8620_ecbus_up); +} + static void sii8620_msc_mr_set_int(struct sii8620 *ctx) { u8 ints[MHL_INT_SIZE]; sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE); sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE); + + if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_DCAP_CHG) { + switch (ctx->mode) { + case CM_MHL3: + sii8620_mt_read_xdevcap_reg(ctx, MHL_XDC_ECBUS_SPEEDS); + sii8620_mt_set_cont(ctx, sii8620_got_ecbus_speed); + break; + case CM_ECBUS_S: + sii8620_mt_read_devcap(ctx, true); + break; + default: + break; + } + } } static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.h b/drivers/gpu/drm/bridge/sil-sii8620.h index 6ff616a4f6ce..3ee4e7e42226 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.h +++ b/drivers/gpu/drm/bridge/sil-sii8620.h @@ -841,6 +841,8 @@ #define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL 0xf0 #define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL 0x0f +#define REG_MHL_DP_CTL8 0x0352 + /* Tx Zone Ctl1, default value: 0x00 */ #define REG_TX_ZONE_CTL1 0x0361 #define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE 0x08 @@ -1088,6 +1090,9 @@ /* CoC Status, default value: 0x00 */ #define REG_COC_STAT_0 0x0700 +#define BIT_COC_STAT_0_PLL_LOCKED BIT(7) +#define MSK_COC_STAT_0_FSM_STATE 0x0f + #define REG_COC_STAT_1 0x0701 #define REG_COC_STAT_2 0x0702 #define REG_COC_STAT_3 0x0703