From: Andrew Lunn Date: Sat, 17 Nov 2012 08:51:05 +0000 (+0100) Subject: ARM: Kirkwood: Convert DNSKW to use gpio-poweroff. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2c0e7ee61b335dea4bd2678591923c02703f4eeb;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: Kirkwood: Convert DNSKW to use gpio-poweroff. Also enable the gpio-poweroff driver when DT is used. Signed-off-by: Andrew Lunn Tested-by: Jamie Lentin Signed-off-by: Jason Cooper --- diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index fd23e63d7dbc..28263a1171ab 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -35,6 +35,11 @@ 6000 2>; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 4 0>; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index d018ad4bcc3c..35b3258cdccd 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -46,6 +46,9 @@ config MACH_GURUPLUG config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" + select POWER_SUPPLY + select POWER_RESET + select POWER_RESET_GPIO select USE_OF help Say 'Y' here if you want your kernel to support the diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 2ac6c60578f6..903680182453 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -57,11 +57,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static void dnskw_power_off(void) -{ - gpio_set_value(36, 1); -} - /* Register any GPIO for output and set the value */ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) { @@ -80,13 +75,6 @@ void __init dnskw_init(void) kirkwood_ge00_init(&dnskw_ge00_data); - /* Register power-off GPIO. */ - if (gpio_request(36, "dnskw:power:off") == 0 - && gpio_direction_output(36, 0) == 0) - pm_power_off = dnskw_power_off; - else - pr_err("dnskw: failed to configure power-off GPIO\n"); - /* Ensure power is supplied to both HDDs */ dnskw_gpio_register(39, "dnskw:power:sata0", 1); dnskw_gpio_register(40, "dnskw:power:sata1", 1);