From: Linus Torvalds Date: Sat, 5 Apr 2014 22:46:37 +0000 (-0700) Subject: Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm... X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2bf73dd61a84cdf27e49f48e08739af6ba70ace1;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Merge tag 'tags/cleanup2-3.15' of git://git./linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ... --- 2bf73dd61a84cdf27e49f48e08739af6ba70ace1 diff --cc Documentation/devicetree/bindings/phy/samsung-phy.txt index 28f9edb8f19c,67d38b3176cf..b422e38946d7 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@@ -21,56 -21,42 +21,96 @@@ Required properties - reg : offset and length of the Display Port PHY register set; - #phy-cells : from the generic PHY bindings, must be 0; +Samsung S5P/EXYNOS SoC series USB PHY +------------------------------------------------- + +Required properties: +- compatible : should be one of the listed compatibles: + - "samsung,exynos4210-usb2-phy" + - "samsung,exynos4x12-usb2-phy" + - "samsung,exynos5250-usb2-phy" +- reg : a list of registers used by phy driver + - first and obligatory is the location of phy modules registers +- samsung,sysreg-phandle - handle to syscon used to control the system registers +- samsung,pmureg-phandle - handle to syscon used to control PMU registers +- #phy-cells : from the generic phy bindings, must be 1; +- clocks and clock-names: + - the "phy" clock is required by the phy module, used as a gate + - the "ref" clock is used to get the rate of the clock provided to the + PHY module + +The first phandle argument in the PHY specifier identifies the PHY, its +meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 +and Exynos 4212) it is as follows: + 0 - USB device ("device"), + 1 - USB host ("host"), + 2 - HSIC0 ("hsic0"), + 3 - HSIC1 ("hsic1"), + +Exynos 4210 and Exynos 4212 use mode switching and require that mode switch +register is supplied. + +Example: + +For Exynos 4412 (compatible with Exynos 4212): + +usbphy: phy@125b0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + reg = <0x125b0000 0x100>; + clocks = <&clock 305>, <&clock 2>; + clock-names = "phy", "ref"; + status = "okay"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sys_reg>; + samsung,pmureg-phandle = <&pmu_reg>; +}; + +Then the PHY can be used in other nodes such as: + +phy-consumer@12340000 { + phys = <&usbphy 2>; + phy-names = "phy"; +}; + +Refer to DT bindings documentation of particular PHY consumer devices for more +information about required PHYs and the way of specification. ++ + Samsung SATA PHY Controller + --------------------------- + + SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. + Each SATA PHY controller should have its own node. + + Required properties: + - compatible : compatible list, contains "samsung,exynos5250-sata-phy" + - reg : offset and length of the SATA PHY register set; + - #phy-cells : must be zero + - clocks : must be exactly one entry + - clock-names : must be "sata_phyctrl" + - samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments + - samsung,syscon-phandle : a phandle to the PMU system controller, no arguments + + Example: + sata_phy: sata-phy@12170000 { + compatible = "samsung,exynos5250-sata-phy"; + reg = <0x12170000 0x1ff>; + clocks = <&clock 287>; + clock-names = "sata_phyctrl"; + #phy-cells = <0>; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; + samsung,syscon-phandle = <&pmu_syscon>; + }; + + Device-Tree bindings for sataphy i2c client driver + -------------------------------------------------- + + Required properties: + compatible: Should be "samsung,exynos-sataphy-i2c" + - reg: I2C address of the sataphy i2c device. + + Example: + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; diff --cc arch/arm/Kconfig.debug index 8983919a4421,a160744312ab..4a2fc0bf6fc9 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@@ -1158,7 -1162,7 +1158,7 @@@ config DEBUG_UNCOMPRES config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - ARCH_EXYNOS || ARCH_EFM32 - PLAT_SAMSUNG ++ PLAT_SAMSUNG || ARCH_EFM32 default "mach/uncompress.h" config EARLY_PRINTK diff --cc arch/arm/mach-exynos/exynos.c index 000000000000,4987ec7711c3..b32a907d021d mode 000000,100644..100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@@ -1,0 -1,409 +1,411 @@@ + /* + * SAMSUNG EXYNOS Flattened Device Tree enabled machine + * + * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + + #include + #include + #include + #include + #include + + #include + + #include "common.h" + #include "mfc.h" + #include "regs-pmu.h" + + #define L2_AUX_VAL 0x7C470001 + #define L2_AUX_MASK 0xC200ffff + + static struct map_desc exynos4_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), + .length = SZ_128K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_L2CC, + .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos4210_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos4x12_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos5250_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, + }; + + static struct map_desc exynos5_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), + .length = 144 * SZ_1K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, + }; + + void exynos_restart(enum reboot_mode mode, const char *cmd) + { + struct device_node *np; + u32 val = 0x1; + void __iomem *addr = EXYNOS_SWRESET; + + if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + + addr = of_iomap(np, 0) + 0xcc; + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); + } + + __raw_writel(val, addr); + } + + static struct platform_device exynos_cpuidle = { + .name = "exynos_cpuidle", + .id = -1, + }; + + void __init exynos_cpuidle_init(void) + { + platform_device_register(&exynos_cpuidle); + } + + void __init exynos_cpufreq_init(void) + { + platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); + } + + void __init exynos_init_late(void) + { + if (of_machine_is_compatible("samsung,exynos5440")) + /* to be supported later */ + return; + + pm_genpd_poweroff_unused(); + exynos_pm_init(); + } + + static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, + int depth, void *data) + { + struct map_desc iodesc; + __be32 *reg; + unsigned long len; + + if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && + !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) + return 0; + + reg = of_get_flat_dt_prop(node, "reg", &len); + if (reg == NULL || len != (sizeof(unsigned long) * 2)) + return 0; + + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); + iodesc.length = be32_to_cpu(reg[1]) - 1; + iodesc.virtual = (unsigned long)S5P_VA_CHIPID; + iodesc.type = MT_DEVICE; + iotable_init(&iodesc, 1); + return 1; + } + + /* + * exynos_map_io + * + * register the standard cpu IO areas + */ + static void __init exynos_map_io(void) + { + if (soc_is_exynos4()) + iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + + if (soc_is_exynos5()) + iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); + + if (soc_is_exynos4210()) { + if (samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, + ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, + ARRAY_SIZE(exynos4_iodesc1)); + iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); + } + if (soc_is_exynos4212() || soc_is_exynos4412()) + iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); + if (soc_is_exynos5250()) + iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); + } + + void __init exynos_init_io(void) + { + debug_ll_io_init(); + + of_scan_flat_dt(exynos_fdt_map_chipid, NULL); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + + exynos_map_io(); + } + + struct bus_type exynos_subsys = { + .name = "exynos-core", + .dev_name = "exynos-core", + }; + + static int __init exynos_core_init(void) + { + return subsys_system_register(&exynos_subsys, NULL); + } + core_initcall(exynos_core_init); + + static int __init exynos4_l2x0_cache_init(void) + { + int ret; + + ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); + if (ret) + return ret; + - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); ++ if (IS_ENABLED(CONFIG_S5P_SLEEP)) { ++ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); ++ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); ++ } + return 0; + } + early_initcall(exynos4_l2x0_cache_init); + + static void __init exynos_dt_machine_init(void) + { + struct device_node *i2c_np; + const char *i2c_compat = "samsung,s3c2440-i2c"; + unsigned int tmp; + int id; + + /* + * Exynos5's legacy i2c controller and new high speed i2c + * controller have muxed interrupt sources. By default the + * interrupts for 4-channel HS-I2C controller are enabled. + * If node for first four channels of legacy i2c controller + * are available then re-configure the interrupts via the + * system register. + */ + if (soc_is_exynos5()) { + for_each_compatible_node(i2c_np, NULL, i2c_compat) { + if (of_device_is_available(i2c_np)) { + id = of_alias_get_id(i2c_np, "i2c"); + if (id < 4) { + tmp = readl(EXYNOS5_SYS_I2C_CFG); + writel(tmp & ~(0x1 << id), + EXYNOS5_SYS_I2C_CFG); + } + } + } + } + + exynos_cpuidle_init(); + exynos_cpufreq_init(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + } + + static char const *exynos_dt_compat[] __initconst = { + "samsung,exynos4", + "samsung,exynos4210", + "samsung,exynos4212", + "samsung,exynos4412", + "samsung,exynos5", + "samsung,exynos5250", + "samsung,exynos5420", + "samsung,exynos5440", + NULL + }; + + static void __init exynos_reserve(void) + { + #ifdef CONFIG_S5P_DEV_MFC + int i; + char *mfc_mem[] = { + "samsung,mfc-v5", + "samsung,mfc-v6", + "samsung,mfc-v7", + }; + + for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) + if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i])) + break; + #endif + } + + DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") + /* Maintainer: Thomas Abraham */ + /* Maintainer: Kukjin Kim */ + .smp = smp_ops(exynos_smp_ops), + .map_io = exynos_init_io, + .init_early = exynos_firmware_init, + .init_machine = exynos_dt_machine_init, + .init_late = exynos_init_late, + .dt_compat = exynos_dt_compat, + .restart = exynos_restart, + .reserve = exynos_reserve, + MACHINE_END diff --cc arch/arm/mach-zynq/Kconfig index 0e001a489a79,323e5053cb9f..58c2b844e0a3 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@@ -7,7 -8,12 +7,8 @@@ config ARCH_ZYN select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select HAVE_SMP - select SPARSE_IRQ select CADENCE_TTC_TIMER - select ARM_GLOBAL_TIMER + select ARM_GLOBAL_TIMER if !CPU_FREQ + select MFD_SYSCON help Support for Xilinx Zynq ARM Cortex A9 Platform diff --cc arch/arm/mach-zynq/common.c index a39be8e80856,dca60d5ba756..6fcc584c1a11 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@@ -74,7 -73,8 +75,9 @@@ static void __init zynq_init_machine(vo of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register(&zynq_cpuidle_device); + platform_device_register_full(&devinfo); + + zynq_slcr_init(); } static void __init zynq_timer_init(void)