From: Linus Walleij Date: Fri, 13 May 2011 10:31:13 +0000 (+0200) Subject: mach-ux500: set proper I2C platform data from MOP500s X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2b030bda66b0a59f8ebf0ce2117088256a5f9f97;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git mach-ux500: set proper I2C platform data from MOP500s This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: Linus Walleij Signed-off-by: Ben Dooks --- diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6e1907fa94f0..bb26f40493e6 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -204,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ +#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ @@ -219,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ .rft = _rft, \ /* std. mode operation */ \ .clk_freq = clk, \ + /* Slave response timeout(ms) */\ + .timeout = t_out, \ .sm = _sm, \ } /* * The board uses 4 i2c controllers, initialize all of * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard + * Tx & Rx FIFO threshold values as 8 and standard * mode of operation */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); +U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); static void __init mop500_i2c_init(void) {