From: Javier Cardona Date: Tue, 1 May 2012 10:01:28 +0000 (-0700) Subject: mac80211_hwsim: Fix rate control by correctly reporting transmission counts X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2a4ffa4c8934bd9a36c8354a4b87a529114baf62;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git mac80211_hwsim: Fix rate control by correctly reporting transmission counts Drivers need to report the number of transmission attempts for each rate as well as to terminate the rate array with -1. The in-kernel datapath of hwsim simulates a perfect medium, therefore the driver only needs to report that the first transmission attempt was sucessfully completed at the most favorable rate. Rate control is working again for this driver. Tested mesh mode with minstrel. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 03c0c6b1372c..fb787df01666 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -746,6 +746,11 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) hwsim_check_sta_magic(txi->control.sta); ieee80211_tx_info_clear_status(txi); + + /* frame was transmitted at most favorable rate at first attempt */ + txi->control.rates[0].count = 1; + txi->control.rates[1].idx = -1; + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack) txi->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb);