From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Mon, 26 Oct 2015 09:02:29 +0000 (+0200)
Subject: qede: Add basic network device support
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2950219d87b0;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

qede: Add basic network device support

This patch includes the basic Rx/Tx support for the driver [although
carrier will still never be turned on].
Following this patch the driver registers a network device, initializes
it and prepares it for traffic.

Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 7e2bcfae0db9..424ef4a55828 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -51,6 +51,7 @@ struct qede_dev {
 #define QEDE_MAX_TSS_CNT(edev)	((edev)->dev_info.num_queues * \
 				 (edev)->dev_info.num_tc)
 
+	struct qede_fastpath		*fp_array;
 	u16				num_rss;
 	u8				num_tc;
 #define QEDE_RSS_CNT(edev)		((edev)->num_rss)
@@ -58,6 +59,9 @@ struct qede_dev {
 					 (edev)->num_tc)
 #define QEDE_TSS_IDX(edev, txqidx)	((txqidx) % (edev)->num_rss)
 #define QEDE_TC_IDX(edev, txqidx)	((txqidx) / (edev)->num_rss)
+#define QEDE_TX_QUEUE(edev, txqidx)	\
+	(&(edev)->fp_array[QEDE_TSS_IDX((edev), (txqidx))].txqs[QEDE_TC_IDX( \
+							(edev), (txqidx))])
 
 	struct qed_int_info		int_info;
 	unsigned char			primary_mac[ETH_ALEN];
@@ -65,9 +69,133 @@ struct qede_dev {
 	/* Smaller private varaiant of the RTNL lock */
 	struct mutex			qede_lock;
 	u32				state; /* Protected by qede_lock */
+	u16				rx_buf_size;
+	/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
+#define ETH_OVERHEAD			(ETH_HLEN + 8 + 8)
+	/* Max supported alignment is 256 (8 shift)
+	 * minimal alignment shift 6 is optimal for 57xxx HW performance
+	 */
+#define QEDE_RX_ALIGN_SHIFT		max(6, min(8, L1_CACHE_SHIFT))
+	/* We assume skb_build() uses sizeof(struct skb_shared_info) bytes
+	 * at the end of skb->data, to avoid wasting a full cache line.
+	 * This reduces memory use (skb->truesize).
+	 */
+#define QEDE_FW_RX_ALIGN_END					\
+	max_t(u64, 1UL << QEDE_RX_ALIGN_SHIFT,			\
+	      SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+
+	struct qed_update_vport_rss_params	rss_params;
+	u16			q_num_rx_buffers; /* Must be a power of two */
+	u16			q_num_tx_buffers; /* Must be a power of two */
+};
+
+enum QEDE_STATE {
+	QEDE_STATE_CLOSED,
+	QEDE_STATE_OPEN,
+};
+
+#define HILO_U64(hi, lo)		((((u64)(hi)) << 32) + (lo))
+
+#define	MAX_NUM_TC	8
+#define	MAX_NUM_PRI	8
+
+/* The driver supports the new build_skb() API:
+ * RX ring buffer contains pointer to kmalloc() data only,
+ * skb are built only after the frame was DMA-ed.
+ */
+struct sw_rx_data {
+	u8 *data;
+
+	DEFINE_DMA_UNMAP_ADDR(mapping);
+};
+
+struct qede_rx_queue {
+	__le16			*hw_cons_ptr;
+	struct sw_rx_data	*sw_rx_ring;
+	u16			sw_rx_cons;
+	u16			sw_rx_prod;
+	struct qed_chain	rx_bd_ring;
+	struct qed_chain	rx_comp_ring;
+	void __iomem		*hw_rxq_prod_addr;
+
+	int			rx_buf_size;
+
+	u16			num_rx_buffers;
+	u16			rxq_id;
+
+	u64			rx_hw_errors;
+	u64			rx_alloc_errors;
+};
+
+union db_prod {
+	struct eth_db_data data;
+	u32		raw;
+};
+
+struct sw_tx_bd {
+	struct sk_buff *skb;
+	u8 flags;
+/* Set on the first BD descriptor when there is a split BD */
+#define QEDE_TSO_SPLIT_BD		BIT(0)
+};
+
+struct qede_tx_queue {
+	int			index; /* Queue index */
+	__le16			*hw_cons_ptr;
+	struct sw_tx_bd		*sw_tx_ring;
+	u16			sw_tx_cons;
+	u16			sw_tx_prod;
+	struct qed_chain	tx_pbl;
+	void __iomem		*doorbell_addr;
+	union db_prod		tx_db;
+
+	u16			num_tx_buffers;
+};
+
+#define BD_UNMAP_ADDR(bd)		HILO_U64(le32_to_cpu((bd)->addr.hi), \
+						 le32_to_cpu((bd)->addr.lo))
+#define BD_SET_UNMAP_ADDR_LEN(bd, maddr, len)				\
+	do {								\
+		(bd)->addr.hi = cpu_to_le32(upper_32_bits(maddr));	\
+		(bd)->addr.lo = cpu_to_le32(lower_32_bits(maddr));	\
+		(bd)->nbytes = cpu_to_le16(len);			\
+	} while (0)
+#define BD_UNMAP_LEN(bd)		(le16_to_cpu((bd)->nbytes))
+
+struct qede_fastpath {
+	struct qede_dev	*edev;
+	u8			rss_id;
+	struct napi_struct	napi;
+	struct qed_sb_info	*sb_info;
+	struct qede_rx_queue	*rxq;
+	struct qede_tx_queue	*txqs;
+
+#define VEC_NAME_SIZE	(sizeof(((struct net_device *)0)->name) + 8)
+	char	name[VEC_NAME_SIZE];
 };
 
 /* Debug print definitions */
 #define DP_NAME(edev) ((edev)->ndev->name)
 
+#define XMIT_PLAIN		0
+#define XMIT_L4_CSUM		BIT(0)
+#define XMIT_LSO		BIT(1)
+#define XMIT_ENC		BIT(2)
+
+#define QEDE_CSUM_ERROR			BIT(0)
+#define QEDE_CSUM_UNNECESSARY		BIT(1)
+#define RX_RING_SIZE_POW	13
+#define RX_RING_SIZE		BIT(RX_RING_SIZE_POW)
+#define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
+#define NUM_RX_BDS_MIN		128
+#define NUM_RX_BDS_DEF		NUM_RX_BDS_MAX
+
+#define TX_RING_SIZE_POW	13
+#define TX_RING_SIZE		BIT(TX_RING_SIZE_POW)
+#define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
+#define NUM_TX_BDS_MIN		128
+#define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX
+
+#define	for_each_rss(i) for (i = 0; i < edev->num_rss; i++)
+
 #endif /* _QEDE_H_ */
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 02ed6dbf55a7..daba118f99ca 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -85,6 +85,8 @@ static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id);
 #define TX_TIMEOUT		(5 * HZ)
 
 static void qede_remove(struct pci_dev *pdev);
+static int qede_alloc_rx_buffer(struct qede_dev *edev,
+				struct qede_rx_queue *rxq);
 
 static struct pci_driver qede_pci_driver = {
 	.name = "qede",
@@ -93,6 +95,41 @@ static struct pci_driver qede_pci_driver = {
 	.remove = qede_remove,
 };
 
+static int qede_netdev_event(struct notifier_block *this, unsigned long event,
+			     void *ptr)
+{
+	struct net_device *ndev = netdev_notifier_info_to_dev(ptr);
+	struct ethtool_drvinfo drvinfo;
+	struct qede_dev *edev;
+
+	/* Currently only support name change */
+	if (event != NETDEV_CHANGENAME)
+		goto done;
+
+	/* Check whether this is a qede device */
+	if (!ndev || !ndev->ethtool_ops || !ndev->ethtool_ops->get_drvinfo)
+		goto done;
+
+	memset(&drvinfo, 0, sizeof(drvinfo));
+	ndev->ethtool_ops->get_drvinfo(ndev, &drvinfo);
+	if (strcmp(drvinfo.driver, "qede"))
+		goto done;
+	edev = netdev_priv(ndev);
+
+	/* Notify qed of the name change */
+	if (!edev->ops || !edev->ops->common)
+		goto done;
+	edev->ops->common->set_id(edev->cdev, edev->ndev->name,
+				  "qede");
+
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block qede_netdev_notifier = {
+	.notifier_call = qede_netdev_event,
+};
+
 static
 int __init qede_init(void)
 {
@@ -115,9 +152,20 @@ int __init qede_init(void)
 		return -EINVAL;
 	}
 
+	/* Must register notifier before pci ops, since we might miss
+	 * interface rename after pci probe and netdev registeration.
+	 */
+	ret = register_netdevice_notifier(&qede_netdev_notifier);
+	if (ret) {
+		pr_notice("Failed to register netdevice_notifier\n");
+		qed_put_eth_ops();
+		return -EINVAL;
+	}
+
 	ret = pci_register_driver(&qede_pci_driver);
 	if (ret) {
 		pr_notice("Failed to register driver\n");
+		unregister_netdevice_notifier(&qede_netdev_notifier);
 		qed_put_eth_ops();
 		return -EINVAL;
 	}
@@ -129,6 +177,7 @@ static void __exit qede_cleanup(void)
 {
 	pr_notice("qede_cleanup called\n");
 
+	unregister_netdevice_notifier(&qede_netdev_notifier);
 	pci_unregister_driver(&qede_pci_driver);
 	qed_put_eth_ops();
 }
@@ -136,6 +185,858 @@ static void __exit qede_cleanup(void)
 module_init(qede_init);
 module_exit(qede_cleanup);
 
+/* -------------------------------------------------------------------------
+ * START OF FAST-PATH
+ * -------------------------------------------------------------------------
+ */
+
+/* Unmap the data and free skb */
+static int qede_free_tx_pkt(struct qede_dev *edev,
+			    struct qede_tx_queue *txq,
+			    int *len)
+{
+	u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX;
+	struct sk_buff *skb = txq->sw_tx_ring[idx].skb;
+	struct eth_tx_1st_bd *first_bd;
+	struct eth_tx_bd *tx_data_bd;
+	int bds_consumed = 0;
+	int nbds;
+	bool data_split = txq->sw_tx_ring[idx].flags & QEDE_TSO_SPLIT_BD;
+	int i, split_bd_len = 0;
+
+	if (unlikely(!skb)) {
+		DP_ERR(edev,
+		       "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n",
+		       idx, txq->sw_tx_cons, txq->sw_tx_prod);
+		return -1;
+	}
+
+	*len = skb->len;
+
+	first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
+
+	bds_consumed++;
+
+	nbds = first_bd->data.nbds;
+
+	if (data_split) {
+		struct eth_tx_bd *split = (struct eth_tx_bd *)
+			qed_chain_consume(&txq->tx_pbl);
+		split_bd_len = BD_UNMAP_LEN(split);
+		bds_consumed++;
+	}
+	dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+		       BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+	/* Unmap the data of the skb frags */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) {
+		tx_data_bd = (struct eth_tx_bd *)
+			qed_chain_consume(&txq->tx_pbl);
+		dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
+			       BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+	}
+
+	while (bds_consumed++ < nbds)
+		qed_chain_consume(&txq->tx_pbl);
+
+	/* Free skb */
+	dev_kfree_skb_any(skb);
+	txq->sw_tx_ring[idx].skb = NULL;
+	txq->sw_tx_ring[idx].flags = 0;
+
+	return 0;
+}
+
+/* Unmap the data and free skb when mapping failed during start_xmit */
+static void qede_free_failed_tx_pkt(struct qede_dev *edev,
+				    struct qede_tx_queue *txq,
+				    struct eth_tx_1st_bd *first_bd,
+				    int nbd,
+				    bool data_split)
+{
+	u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+	struct sk_buff *skb = txq->sw_tx_ring[idx].skb;
+	struct eth_tx_bd *tx_data_bd;
+	int i, split_bd_len = 0;
+
+	/* Return prod to its position before this skb was handled */
+	qed_chain_set_prod(&txq->tx_pbl,
+			   le16_to_cpu(txq->tx_db.data.bd_prod),
+			   first_bd);
+
+	first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
+
+	if (data_split) {
+		struct eth_tx_bd *split = (struct eth_tx_bd *)
+					  qed_chain_produce(&txq->tx_pbl);
+		split_bd_len = BD_UNMAP_LEN(split);
+		nbd--;
+	}
+
+	dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+		       BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+	/* Unmap the data of the skb frags */
+	for (i = 0; i < nbd; i++) {
+		tx_data_bd = (struct eth_tx_bd *)
+			qed_chain_produce(&txq->tx_pbl);
+		if (tx_data_bd->nbytes)
+			dma_unmap_page(&edev->pdev->dev,
+				       BD_UNMAP_ADDR(tx_data_bd),
+				       BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+	}
+
+	/* Return again prod to its position before this skb was handled */
+	qed_chain_set_prod(&txq->tx_pbl,
+			   le16_to_cpu(txq->tx_db.data.bd_prod),
+			   first_bd);
+
+	/* Free skb */
+	dev_kfree_skb_any(skb);
+	txq->sw_tx_ring[idx].skb = NULL;
+	txq->sw_tx_ring[idx].flags = 0;
+}
+
+static u32 qede_xmit_type(struct qede_dev *edev,
+			  struct sk_buff *skb,
+			  int *ipv6_ext)
+{
+	u32 rc = XMIT_L4_CSUM;
+	__be16 l3_proto;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		return XMIT_PLAIN;
+
+	l3_proto = vlan_get_protocol(skb);
+	if (l3_proto == htons(ETH_P_IPV6) &&
+	    (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
+		*ipv6_ext = 1;
+
+	if (skb_is_gso(skb))
+		rc |= XMIT_LSO;
+
+	return rc;
+}
+
+static void qede_set_params_for_ipv6_ext(struct sk_buff *skb,
+					 struct eth_tx_2nd_bd *second_bd,
+					 struct eth_tx_3rd_bd *third_bd)
+{
+	u8 l4_proto;
+	u16 bd2_bits = 0, bd2_bits2 = 0;
+
+	bd2_bits2 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT);
+
+	bd2_bits |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) &
+		     ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK)
+		    << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT;
+
+	bd2_bits2 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH <<
+		      ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT);
+
+	if (vlan_get_protocol(skb) == htons(ETH_P_IPV6))
+		l4_proto = ipv6_hdr(skb)->nexthdr;
+	else
+		l4_proto = ip_hdr(skb)->protocol;
+
+	if (l4_proto == IPPROTO_UDP)
+		bd2_bits2 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT;
+
+	if (third_bd) {
+		third_bd->data.bitfields |=
+			((tcp_hdrlen(skb) / 4) &
+			 ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) <<
+			ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT;
+	}
+
+	second_bd->data.bitfields = cpu_to_le16(bd2_bits);
+	second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2);
+}
+
+static int map_frag_to_bd(struct qede_dev *edev,
+			  skb_frag_t *frag,
+			  struct eth_tx_bd *bd)
+{
+	dma_addr_t mapping;
+
+	/* Map skb non-linear frag data for DMA */
+	mapping = skb_frag_dma_map(&edev->pdev->dev, frag, 0,
+				   skb_frag_size(frag),
+				   DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+		DP_NOTICE(edev, "Unable to map frag - dropping packet\n");
+		return -ENOMEM;
+	}
+
+	/* Setup the data pointer of the frag data */
+	BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag));
+
+	return 0;
+}
+
+/* Main transmit function */
+static
+netdev_tx_t qede_start_xmit(struct sk_buff *skb,
+			    struct net_device *ndev)
+{
+	struct qede_dev *edev = netdev_priv(ndev);
+	struct netdev_queue *netdev_txq;
+	struct qede_tx_queue *txq;
+	struct eth_tx_1st_bd *first_bd;
+	struct eth_tx_2nd_bd *second_bd = NULL;
+	struct eth_tx_3rd_bd *third_bd = NULL;
+	struct eth_tx_bd *tx_data_bd = NULL;
+	u16 txq_index;
+	u8 nbd = 0;
+	dma_addr_t mapping;
+	int rc, frag_idx = 0, ipv6_ext = 0;
+	u8 xmit_type;
+	u16 idx;
+	u16 hlen;
+	bool data_split;
+
+	/* Get tx-queue context and netdev index */
+	txq_index = skb_get_queue_mapping(skb);
+	WARN_ON(txq_index >= QEDE_TSS_CNT(edev));
+	txq = QEDE_TX_QUEUE(edev, txq_index);
+	netdev_txq = netdev_get_tx_queue(ndev, txq_index);
+
+	/* Current code doesn't support SKB linearization, since the max number
+	 * of skb frags can be passed in the FW HSI.
+	 */
+	BUILD_BUG_ON(MAX_SKB_FRAGS > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET);
+
+	WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) <
+			       (MAX_SKB_FRAGS + 1));
+
+	xmit_type = qede_xmit_type(edev, skb, &ipv6_ext);
+
+	/* Fill the entry in the SW ring and the BDs in the FW ring */
+	idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+	txq->sw_tx_ring[idx].skb = skb;
+	first_bd = (struct eth_tx_1st_bd *)
+		   qed_chain_produce(&txq->tx_pbl);
+	memset(first_bd, 0, sizeof(*first_bd));
+	first_bd->data.bd_flags.bitfields =
+		1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT;
+
+	/* Map skb linear data for DMA and set in the first BD */
+	mapping = dma_map_single(&edev->pdev->dev, skb->data,
+				 skb_headlen(skb), DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+		DP_NOTICE(edev, "SKB mapping failed\n");
+		qede_free_failed_tx_pkt(edev, txq, first_bd, 0, false);
+		return NETDEV_TX_OK;
+	}
+	nbd++;
+	BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb));
+
+	/* In case there is IPv6 with extension headers or LSO we need 2nd and
+	 * 3rd BDs.
+	 */
+	if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) {
+		second_bd = (struct eth_tx_2nd_bd *)
+			qed_chain_produce(&txq->tx_pbl);
+		memset(second_bd, 0, sizeof(*second_bd));
+
+		nbd++;
+		third_bd = (struct eth_tx_3rd_bd *)
+			qed_chain_produce(&txq->tx_pbl);
+		memset(third_bd, 0, sizeof(*third_bd));
+
+		nbd++;
+		/* We need to fill in additional data in second_bd... */
+		tx_data_bd = (struct eth_tx_bd *)second_bd;
+	}
+
+	if (skb_vlan_tag_present(skb)) {
+		first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
+		first_bd->data.bd_flags.bitfields |=
+			1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT;
+	}
+
+	/* Fill the parsing flags & params according to the requested offload */
+	if (xmit_type & XMIT_L4_CSUM) {
+		/* We don't re-calculate IP checksum as it is already done by
+		 * the upper stack
+		 */
+		first_bd->data.bd_flags.bitfields |=
+			1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT;
+
+		/* If the packet is IPv6 with extension header, indicate that
+		 * to FW and pass few params, since the device cracker doesn't
+		 * support parsing IPv6 with extension header/s.
+		 */
+		if (unlikely(ipv6_ext))
+			qede_set_params_for_ipv6_ext(skb, second_bd, third_bd);
+	}
+
+	if (xmit_type & XMIT_LSO) {
+		first_bd->data.bd_flags.bitfields |=
+			(1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT);
+		third_bd->data.lso_mss =
+			cpu_to_le16(skb_shinfo(skb)->gso_size);
+
+		first_bd->data.bd_flags.bitfields |=
+		1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
+		hlen = skb_transport_header(skb) +
+		       tcp_hdrlen(skb) - skb->data;
+
+		/* @@@TBD - if will not be removed need to check */
+		third_bd->data.bitfields |=
+			(1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT);
+
+		/* Make life easier for FW guys who can't deal with header and
+		 * data on same BD. If we need to split, use the second bd...
+		 */
+		if (unlikely(skb_headlen(skb) > hlen)) {
+			DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+				   "TSO split header size is %d (%x:%x)\n",
+				   first_bd->nbytes, first_bd->addr.hi,
+				   first_bd->addr.lo);
+
+			mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi),
+					   le32_to_cpu(first_bd->addr.lo)) +
+					   hlen;
+
+			BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping,
+					      le16_to_cpu(first_bd->nbytes) -
+					      hlen);
+
+			/* this marks the BD as one that has no
+			 * individual mapping
+			 */
+			txq->sw_tx_ring[idx].flags |= QEDE_TSO_SPLIT_BD;
+
+			first_bd->nbytes = cpu_to_le16(hlen);
+
+			tx_data_bd = (struct eth_tx_bd *)third_bd;
+			data_split = true;
+		}
+	}
+
+	/* Handle fragmented skb */
+	/* special handle for frags inside 2nd and 3rd bds.. */
+	while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) {
+		rc = map_frag_to_bd(edev,
+				    &skb_shinfo(skb)->frags[frag_idx],
+				    tx_data_bd);
+		if (rc) {
+			qede_free_failed_tx_pkt(edev, txq, first_bd, nbd,
+						data_split);
+			return NETDEV_TX_OK;
+		}
+
+		if (tx_data_bd == (struct eth_tx_bd *)second_bd)
+			tx_data_bd = (struct eth_tx_bd *)third_bd;
+		else
+			tx_data_bd = NULL;
+
+		frag_idx++;
+	}
+
+	/* map last frags into 4th, 5th .... */
+	for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) {
+		tx_data_bd = (struct eth_tx_bd *)
+			     qed_chain_produce(&txq->tx_pbl);
+
+		memset(tx_data_bd, 0, sizeof(*tx_data_bd));
+
+		rc = map_frag_to_bd(edev,
+				    &skb_shinfo(skb)->frags[frag_idx],
+				    tx_data_bd);
+		if (rc) {
+			qede_free_failed_tx_pkt(edev, txq, first_bd, nbd,
+						data_split);
+			return NETDEV_TX_OK;
+		}
+	}
+
+	/* update the first BD with the actual num BDs */
+	first_bd->data.nbds = nbd;
+
+	netdev_tx_sent_queue(netdev_txq, skb->len);
+
+	skb_tx_timestamp(skb);
+
+	/* Advance packet producer only before sending the packet since mapping
+	 * of pages may fail.
+	 */
+	txq->sw_tx_prod++;
+
+	/* 'next page' entries are counted in the producer value */
+	txq->tx_db.data.bd_prod =
+		cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl));
+
+	/* wmb makes sure that the BDs data is updated before updating the
+	 * producer, otherwise FW may read old data from the BDs.
+	 */
+	wmb();
+	barrier();
+	writel(txq->tx_db.raw, txq->doorbell_addr);
+
+	/* mmiowb is needed to synchronize doorbell writes from more than one
+	 * processor. It guarantees that the write arrives to the device before
+	 * the queue lock is released and another start_xmit is called (possibly
+	 * on another CPU). Without this barrier, the next doorbell can bypass
+	 * this doorbell. This is applicable to IA64/Altix systems.
+	 */
+	mmiowb();
+
+	if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl)
+		      < (MAX_SKB_FRAGS + 1))) {
+		netif_tx_stop_queue(netdev_txq);
+		DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+			   "Stop queue was called\n");
+		/* paired memory barrier is in qede_tx_int(), we have to keep
+		 * ordering of set_bit() in netif_tx_stop_queue() and read of
+		 * fp->bd_tx_cons
+		 */
+		smp_mb();
+
+		if (qed_chain_get_elem_left(&txq->tx_pbl)
+		     >= (MAX_SKB_FRAGS + 1) &&
+		    (edev->state == QEDE_STATE_OPEN)) {
+			netif_tx_wake_queue(netdev_txq);
+			DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+				   "Wake queue was called\n");
+		}
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static int qede_txq_has_work(struct qede_tx_queue *txq)
+{
+	u16 hw_bd_cons;
+
+	/* Tell compiler that consumer and producer can change */
+	barrier();
+	hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+	if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1)
+		return 0;
+
+	return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl);
+}
+
+static int qede_tx_int(struct qede_dev *edev,
+		       struct qede_tx_queue *txq)
+{
+	struct netdev_queue *netdev_txq;
+	u16 hw_bd_cons;
+	unsigned int pkts_compl = 0, bytes_compl = 0;
+	int rc;
+
+	netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index);
+
+	hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+	barrier();
+
+	while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
+		int len = 0;
+
+		rc = qede_free_tx_pkt(edev, txq, &len);
+		if (rc) {
+			DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n",
+				  hw_bd_cons,
+				  qed_chain_get_cons_idx(&txq->tx_pbl));
+			break;
+		}
+
+		bytes_compl += len;
+		pkts_compl++;
+		txq->sw_tx_cons++;
+	}
+
+	netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl);
+
+	/* Need to make the tx_bd_cons update visible to start_xmit()
+	 * before checking for netif_tx_queue_stopped().  Without the
+	 * memory barrier, there is a small possibility that
+	 * start_xmit() will miss it and cause the queue to be stopped
+	 * forever.
+	 * On the other hand we need an rmb() here to ensure the proper
+	 * ordering of bit testing in the following
+	 * netif_tx_queue_stopped(txq) call.
+	 */
+	smp_mb();
+
+	if (unlikely(netif_tx_queue_stopped(netdev_txq))) {
+		/* Taking tx_lock is needed to prevent reenabling the queue
+		 * while it's empty. This could have happen if rx_action() gets
+		 * suspended in qede_tx_int() after the condition before
+		 * netif_tx_wake_queue(), while tx_action (qede_start_xmit()):
+		 *
+		 * stops the queue->sees fresh tx_bd_cons->releases the queue->
+		 * sends some packets consuming the whole queue again->
+		 * stops the queue
+		 */
+
+		__netif_tx_lock(netdev_txq, smp_processor_id());
+
+		if ((netif_tx_queue_stopped(netdev_txq)) &&
+		    (edev->state == QEDE_STATE_OPEN) &&
+		    (qed_chain_get_elem_left(&txq->tx_pbl)
+		      >= (MAX_SKB_FRAGS + 1))) {
+			netif_tx_wake_queue(netdev_txq);
+			DP_VERBOSE(edev, NETIF_MSG_TX_DONE,
+				   "Wake queue was called\n");
+		}
+
+		__netif_tx_unlock(netdev_txq);
+	}
+
+	return 0;
+}
+
+static bool qede_has_rx_work(struct qede_rx_queue *rxq)
+{
+	u16 hw_comp_cons, sw_comp_cons;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+
+	hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+	sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+	return hw_comp_cons != sw_comp_cons;
+}
+
+static bool qede_has_tx_work(struct qede_fastpath *fp)
+{
+	u8 tc;
+
+	for (tc = 0; tc < fp->edev->num_tc; tc++)
+		if (qede_txq_has_work(&fp->txqs[tc]))
+			return true;
+	return false;
+}
+
+/* This function copies the Rx buffer from the CONS position to the PROD
+ * position, since we failed to allocate a new Rx buffer.
+ */
+static void qede_reuse_rx_data(struct qede_rx_queue *rxq)
+{
+	struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring);
+	struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
+	struct sw_rx_data *sw_rx_data_cons =
+		&rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
+	struct sw_rx_data *sw_rx_data_prod =
+		&rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+
+	dma_unmap_addr_set(sw_rx_data_prod, mapping,
+			   dma_unmap_addr(sw_rx_data_cons, mapping));
+
+	sw_rx_data_prod->data = sw_rx_data_cons->data;
+	memcpy(rx_bd_prod, rx_bd_cons, sizeof(struct eth_rx_bd));
+
+	rxq->sw_rx_cons++;
+	rxq->sw_rx_prod++;
+}
+
+static inline void qede_update_rx_prod(struct qede_dev *edev,
+				       struct qede_rx_queue *rxq)
+{
+	u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring);
+	u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring);
+	struct eth_rx_prod_data rx_prods = {0};
+
+	/* Update producers */
+	rx_prods.bd_prod = cpu_to_le16(bd_prod);
+	rx_prods.cqe_prod = cpu_to_le16(cqe_prod);
+
+	/* Make sure that the BD and SGE data is updated before updating the
+	 * producers since FW might read the BD/SGE right after the producer
+	 * is updated.
+	 */
+	wmb();
+
+	internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods),
+			(u32 *)&rx_prods);
+
+	/* mmiowb is needed to synchronize doorbell writes from more than one
+	 * processor. It guarantees that the write arrives to the device before
+	 * the napi lock is released and another qede_poll is called (possibly
+	 * on another CPU). Without this barrier, the next doorbell can bypass
+	 * this doorbell. This is applicable to IA64/Altix systems.
+	 */
+	mmiowb();
+}
+
+static u32 qede_get_rxhash(struct qede_dev *edev,
+			   u8 bitfields,
+			   __le32 rss_hash,
+			   enum pkt_hash_types *rxhash_type)
+{
+	enum rss_hash_type htype;
+
+	htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE);
+
+	if ((edev->ndev->features & NETIF_F_RXHASH) && htype) {
+		*rxhash_type = ((htype == RSS_HASH_TYPE_IPV4) ||
+				(htype == RSS_HASH_TYPE_IPV6)) ?
+				PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4;
+		return le32_to_cpu(rss_hash);
+	}
+	*rxhash_type = PKT_HASH_TYPE_NONE;
+	return 0;
+}
+
+static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag)
+{
+	skb_checksum_none_assert(skb);
+
+	if (csum_flag & QEDE_CSUM_UNNECESSARY)
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static inline void qede_skb_receive(struct qede_dev *edev,
+				    struct qede_fastpath *fp,
+				    struct sk_buff *skb,
+				    u16 vlan_tag)
+{
+	if (vlan_tag)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+				       vlan_tag);
+
+	napi_gro_receive(&fp->napi, skb);
+}
+
+static u8 qede_check_csum(u16 flag)
+{
+	u16 csum_flag = 0;
+	u8 csum = 0;
+
+	if ((PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
+	     PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT) & flag) {
+		csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
+			     PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
+		csum = QEDE_CSUM_UNNECESSARY;
+	}
+
+	csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
+		     PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
+
+	if (csum_flag & flag)
+		return QEDE_CSUM_ERROR;
+
+	return csum;
+}
+
+static int qede_rx_int(struct qede_fastpath *fp, int budget)
+{
+	struct qede_dev *edev = fp->edev;
+	struct qede_rx_queue *rxq = fp->rxq;
+
+	u16 hw_comp_cons, sw_comp_cons, sw_rx_index, parse_flag;
+	int rx_pkt = 0;
+	u8 csum_flag;
+
+	hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+	sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+	/* Memory barrier to prevent the CPU from doing speculative reads of CQE
+	 * / BD in the while-loop before reading hw_comp_cons. If the CQE is
+	 * read before it is written by FW, then FW writes CQE and SB, and then
+	 * the CPU reads the hw_comp_cons, it will use an old CQE.
+	 */
+	rmb();
+
+	/* Loop to complete all indicated BDs */
+	while (sw_comp_cons != hw_comp_cons) {
+		struct eth_fast_path_rx_reg_cqe *fp_cqe;
+		enum pkt_hash_types rxhash_type;
+		enum eth_rx_cqe_type cqe_type;
+		struct sw_rx_data *sw_rx_data;
+		union eth_rx_cqe *cqe;
+		struct sk_buff *skb;
+		u16 len, pad;
+		u32 rx_hash;
+		u8 *data;
+
+		/* Get the CQE from the completion ring */
+		cqe = (union eth_rx_cqe *)
+			qed_chain_consume(&rxq->rx_comp_ring);
+		cqe_type = cqe->fast_path_regular.type;
+
+		if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) {
+			edev->ops->eth_cqe_completion(
+					edev->cdev, fp->rss_id,
+					(struct eth_slow_path_rx_cqe *)cqe);
+			goto next_cqe;
+		}
+
+		/* Get the data from the SW ring */
+		sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
+		sw_rx_data = &rxq->sw_rx_ring[sw_rx_index];
+		data = sw_rx_data->data;
+
+		fp_cqe = &cqe->fast_path_regular;
+		len =  le16_to_cpu(fp_cqe->pkt_len);
+		pad = fp_cqe->placement_offset;
+
+		/* For every Rx BD consumed, we allocate a new BD so the BD ring
+		 * is always with a fixed size. If allocation fails, we take the
+		 * consumed BD and return it to the ring in the PROD position.
+		 * The packet that was received on that BD will be dropped (and
+		 * not passed to the upper stack).
+		 */
+		if (likely(qede_alloc_rx_buffer(edev, rxq) == 0)) {
+			dma_unmap_single(&edev->pdev->dev,
+					 dma_unmap_addr(sw_rx_data, mapping),
+					 rxq->rx_buf_size, DMA_FROM_DEVICE);
+
+			/* If this is an error packet then drop it */
+			parse_flag =
+			le16_to_cpu(cqe->fast_path_regular.pars_flags.flags);
+			csum_flag = qede_check_csum(parse_flag);
+			if (csum_flag == QEDE_CSUM_ERROR) {
+				DP_NOTICE(edev,
+					  "CQE in CONS = %u has error, flags = %x, dropping incoming packet\n",
+					  sw_comp_cons, parse_flag);
+				rxq->rx_hw_errors++;
+				kfree(data);
+				goto next_rx;
+			}
+
+			skb = build_skb(data, 0);
+
+			if (unlikely(!skb)) {
+				DP_NOTICE(edev,
+					  "Build_skb failed, dropping incoming packet\n");
+				kfree(data);
+				rxq->rx_alloc_errors++;
+				goto next_rx;
+			}
+
+			skb_reserve(skb, pad);
+
+		} else {
+			DP_NOTICE(edev,
+				  "New buffer allocation failed, dropping incoming packet and reusing its buffer\n");
+			qede_reuse_rx_data(rxq);
+			rxq->rx_alloc_errors++;
+			goto next_cqe;
+		}
+
+		sw_rx_data->data = NULL;
+
+		skb_put(skb, len);
+
+		skb->protocol = eth_type_trans(skb, edev->ndev);
+
+		rx_hash = qede_get_rxhash(edev, fp_cqe->bitfields,
+					  fp_cqe->rss_hash,
+					  &rxhash_type);
+
+		skb_set_hash(skb, rx_hash, rxhash_type);
+
+		qede_set_skb_csum(skb, csum_flag);
+
+		skb_record_rx_queue(skb, fp->rss_id);
+
+		qede_skb_receive(edev, fp, skb, le16_to_cpu(fp_cqe->vlan_tag));
+
+		qed_chain_consume(&rxq->rx_bd_ring);
+
+next_rx:
+		rxq->sw_rx_cons++;
+		rx_pkt++;
+
+next_cqe: /* don't consume bd rx buffer */
+		qed_chain_recycle_consumed(&rxq->rx_comp_ring);
+		sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+		/* CR TPA - revisit how to handle budget in TPA perhaps
+		 * increase on "end"
+		 */
+		if (rx_pkt == budget)
+			break;
+	} /* repeat while sw_comp_cons != hw_comp_cons... */
+
+	/* Update producers */
+	qede_update_rx_prod(edev, rxq);
+
+	return rx_pkt;
+}
+
+static int qede_poll(struct napi_struct *napi, int budget)
+{
+	int work_done = 0;
+	struct qede_fastpath *fp = container_of(napi, struct qede_fastpath,
+						 napi);
+	struct qede_dev *edev = fp->edev;
+
+	while (1) {
+		u8 tc;
+
+		for (tc = 0; tc < edev->num_tc; tc++)
+			if (qede_txq_has_work(&fp->txqs[tc]))
+				qede_tx_int(edev, &fp->txqs[tc]);
+
+		if (qede_has_rx_work(fp->rxq)) {
+			work_done += qede_rx_int(fp, budget - work_done);
+
+			/* must not complete if we consumed full budget */
+			if (work_done >= budget)
+				break;
+		}
+
+		/* Fall out from the NAPI loop if needed */
+		if (!(qede_has_rx_work(fp->rxq) || qede_has_tx_work(fp))) {
+			qed_sb_update_sb_idx(fp->sb_info);
+			/* *_has_*_work() reads the status block,
+			 * thus we need to ensure that status block indices
+			 * have been actually read (qed_sb_update_sb_idx)
+			 * prior to this check (*_has_*_work) so that
+			 * we won't write the "newer" value of the status block
+			 * to HW (if there was a DMA right after
+			 * qede_has_rx_work and if there is no rmb, the memory
+			 * reading (qed_sb_update_sb_idx) may be postponed
+			 * to right before *_ack_sb). In this case there
+			 * will never be another interrupt until there is
+			 * another update of the status block, while there
+			 * is still unhandled work.
+			 */
+			rmb();
+
+			if (!(qede_has_rx_work(fp->rxq) ||
+			      qede_has_tx_work(fp))) {
+				napi_complete(napi);
+				/* Update and reenable interrupts */
+				qed_sb_ack(fp->sb_info, IGU_INT_ENABLE,
+					   1 /*update*/);
+				break;
+			}
+		}
+	}
+
+	return work_done;
+}
+
+static irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie)
+{
+	struct qede_fastpath *fp = fp_cookie;
+
+	qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/);
+
+	napi_schedule_irqoff(&fp->napi);
+	return IRQ_HANDLED;
+}
+
+/* -------------------------------------------------------------------------
+ * END OF FAST-PATH
+ * -------------------------------------------------------------------------
+ */
+
+static int qede_open(struct net_device *ndev);
+static int qede_close(struct net_device *ndev);
+static const struct net_device_ops qede_netdev_ops = {
+	.ndo_open = qede_open,
+	.ndo_stop = qede_close,
+	.ndo_start_xmit = qede_start_xmit,
+	.ndo_validate_addr = eth_validate_addr,
+};
+
 /* -------------------------------------------------------------------------
  * START OF PROBE / REMOVE
  * -------------------------------------------------------------------------
@@ -165,6 +1066,8 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
 	edev->dp_module = dp_module;
 	edev->dp_level = dp_level;
 	edev->ops = qed_ops;
+	edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+	edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
 
 	DP_INFO(edev, "Allocated netdev with 64 tx queues and 64 rx queues\n");
 
@@ -192,6 +1095,8 @@ static void qede_init_ndev(struct qede_dev *edev)
 
 	ndev->watchdog_timeo = TX_TIMEOUT;
 
+	ndev->netdev_ops = &qede_netdev_ops;
+
 	/* user-changeble features */
 	hw_features = NETIF_F_GRO | NETIF_F_SG |
 		      NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -235,6 +1140,64 @@ static void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level)
 	}
 }
 
+static void qede_free_fp_array(struct qede_dev *edev)
+{
+	if (edev->fp_array) {
+		struct qede_fastpath *fp;
+		int i;
+
+		for_each_rss(i) {
+			fp = &edev->fp_array[i];
+
+			kfree(fp->sb_info);
+			kfree(fp->rxq);
+			kfree(fp->txqs);
+		}
+		kfree(edev->fp_array);
+	}
+	edev->num_rss = 0;
+}
+
+static int qede_alloc_fp_array(struct qede_dev *edev)
+{
+	struct qede_fastpath *fp;
+	int i;
+
+	edev->fp_array = kcalloc(QEDE_RSS_CNT(edev),
+				 sizeof(*edev->fp_array), GFP_KERNEL);
+	if (!edev->fp_array) {
+		DP_NOTICE(edev, "fp array allocation failed\n");
+		goto err;
+	}
+
+	for_each_rss(i) {
+		fp = &edev->fp_array[i];
+
+		fp->sb_info = kcalloc(1, sizeof(*fp->sb_info), GFP_KERNEL);
+		if (!fp->sb_info) {
+			DP_NOTICE(edev, "sb info struct allocation failed\n");
+			goto err;
+		}
+
+		fp->rxq = kcalloc(1, sizeof(*fp->rxq), GFP_KERNEL);
+		if (!fp->rxq) {
+			DP_NOTICE(edev, "RXQ struct allocation failed\n");
+			goto err;
+		}
+
+		fp->txqs = kcalloc(edev->num_tc, sizeof(*fp->txqs), GFP_KERNEL);
+		if (!fp->txqs) {
+			DP_NOTICE(edev, "TXQ array allocation failed\n");
+			goto err;
+		}
+	}
+
+	return 0;
+err:
+	qede_free_fp_array(edev);
+	return -ENOMEM;
+}
+
 static void qede_update_pf_params(struct qed_dev *cdev)
 {
 	struct qed_pf_params pf_params;
@@ -298,12 +1261,20 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level,
 
 	qede_init_ndev(edev);
 
+	rc = register_netdev(edev->ndev);
+	if (rc) {
+		DP_NOTICE(edev, "Cannot register net-device\n");
+		goto err3;
+	}
+
 	edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION);
 
 	DP_INFO(edev, "Ending successfully qede probe\n");
 
 	return 0;
 
+err3:
+	free_netdev(edev->ndev);
 err2:
 	qed_ops->common->slowpath_stop(cdev);
 err1:
@@ -335,6 +1306,8 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
 
 	DP_INFO(edev, "Starting qede_remove\n");
 
+	unregister_netdev(ndev);
+
 	edev->ops->common->set_power_state(cdev, PCI_D0);
 
 	pci_set_drvdata(pdev, NULL);
@@ -352,3 +1325,837 @@ static void qede_remove(struct pci_dev *pdev)
 {
 	__qede_remove(pdev, QEDE_REMOVE_NORMAL);
 }
+
+/* -------------------------------------------------------------------------
+ * START OF LOAD / UNLOAD
+ * -------------------------------------------------------------------------
+ */
+
+static int qede_set_num_queues(struct qede_dev *edev)
+{
+	int rc;
+	u16 rss_num;
+
+	/* Setup queues according to possible resources*/
+	rss_num = netif_get_num_default_rss_queues() *
+		  edev->dev_info.common.num_hwfns;
+
+	rss_num = min_t(u16, QEDE_MAX_RSS_CNT(edev), rss_num);
+
+	rc = edev->ops->common->set_fp_int(edev->cdev, rss_num);
+	if (rc > 0) {
+		/* Managed to request interrupts for our queues */
+		edev->num_rss = rc;
+		DP_INFO(edev, "Managed %d [of %d] RSS queues\n",
+			QEDE_RSS_CNT(edev), rss_num);
+		rc = 0;
+	}
+	return rc;
+}
+
+static void qede_free_mem_sb(struct qede_dev *edev,
+			     struct qed_sb_info *sb_info)
+{
+	if (sb_info->sb_virt)
+		dma_free_coherent(&edev->pdev->dev, sizeof(*sb_info->sb_virt),
+				  (void *)sb_info->sb_virt, sb_info->sb_phys);
+}
+
+/* This function allocates fast-path status block memory */
+static int qede_alloc_mem_sb(struct qede_dev *edev,
+			     struct qed_sb_info *sb_info,
+			     u16 sb_id)
+{
+	struct status_block *sb_virt;
+	dma_addr_t sb_phys;
+	int rc;
+
+	sb_virt = dma_alloc_coherent(&edev->pdev->dev,
+				     sizeof(*sb_virt),
+				     &sb_phys, GFP_KERNEL);
+	if (!sb_virt) {
+		DP_ERR(edev, "Status block allocation failed\n");
+		return -ENOMEM;
+	}
+
+	rc = edev->ops->common->sb_init(edev->cdev, sb_info,
+					sb_virt, sb_phys, sb_id,
+					QED_SB_TYPE_L2_QUEUE);
+	if (rc) {
+		DP_ERR(edev, "Status block initialization failed\n");
+		dma_free_coherent(&edev->pdev->dev, sizeof(*sb_virt),
+				  sb_virt, sb_phys);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void qede_free_rx_buffers(struct qede_dev *edev,
+				 struct qede_rx_queue *rxq)
+{
+	u16 i;
+
+	for (i = rxq->sw_rx_cons; i != rxq->sw_rx_prod; i++) {
+		struct sw_rx_data *rx_buf;
+		u8 *data;
+
+		rx_buf = &rxq->sw_rx_ring[i & NUM_RX_BDS_MAX];
+		data = rx_buf->data;
+
+		dma_unmap_single(&edev->pdev->dev,
+				 dma_unmap_addr(rx_buf, mapping),
+				 rxq->rx_buf_size, DMA_FROM_DEVICE);
+
+		rx_buf->data = NULL;
+		kfree(data);
+	}
+}
+
+static void qede_free_mem_rxq(struct qede_dev *edev,
+			      struct qede_rx_queue *rxq)
+{
+	/* Free rx buffers */
+	qede_free_rx_buffers(edev, rxq);
+
+	/* Free the parallel SW ring */
+	kfree(rxq->sw_rx_ring);
+
+	/* Free the real RQ ring used by FW */
+	edev->ops->common->chain_free(edev->cdev, &rxq->rx_bd_ring);
+	edev->ops->common->chain_free(edev->cdev, &rxq->rx_comp_ring);
+}
+
+static int qede_alloc_rx_buffer(struct qede_dev *edev,
+				struct qede_rx_queue *rxq)
+{
+	struct sw_rx_data *sw_rx_data;
+	struct eth_rx_bd *rx_bd;
+	dma_addr_t mapping;
+	u16 rx_buf_size;
+	u8 *data;
+
+	rx_buf_size = rxq->rx_buf_size;
+
+	data = kmalloc(rx_buf_size, GFP_ATOMIC);
+	if (unlikely(!data)) {
+		DP_NOTICE(edev, "Failed to allocate Rx data\n");
+		return -ENOMEM;
+	}
+
+	mapping = dma_map_single(&edev->pdev->dev, data,
+				 rx_buf_size, DMA_FROM_DEVICE);
+	if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+		kfree(data);
+		DP_NOTICE(edev, "Failed to map Rx buffer\n");
+		return -ENOMEM;
+	}
+
+	sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+	sw_rx_data->data = data;
+
+	dma_unmap_addr_set(sw_rx_data, mapping, mapping);
+
+	/* Advance PROD and get BD pointer */
+	rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring);
+	WARN_ON(!rx_bd);
+	rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping));
+	rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping));
+
+	rxq->sw_rx_prod++;
+
+	return 0;
+}
+
+/* This function allocates all memory needed per Rx queue */
+static int qede_alloc_mem_rxq(struct qede_dev *edev,
+			      struct qede_rx_queue *rxq)
+{
+	int i, rc, size, num_allocated;
+
+	rxq->num_rx_buffers = edev->q_num_rx_buffers;
+
+	rxq->rx_buf_size = NET_IP_ALIGN +
+			   ETH_OVERHEAD +
+			   edev->ndev->mtu +
+			   QEDE_FW_RX_ALIGN_END;
+
+	/* Allocate the parallel driver ring for Rx buffers */
+	size = sizeof(*rxq->sw_rx_ring) * NUM_RX_BDS_MAX;
+	rxq->sw_rx_ring = kzalloc(size, GFP_KERNEL);
+	if (!rxq->sw_rx_ring) {
+		DP_ERR(edev, "Rx buffers ring allocation failed\n");
+		goto err;
+	}
+
+	/* Allocate FW Rx ring  */
+	rc = edev->ops->common->chain_alloc(edev->cdev,
+					    QED_CHAIN_USE_TO_CONSUME_PRODUCE,
+					    QED_CHAIN_MODE_NEXT_PTR,
+					    NUM_RX_BDS_MAX,
+					    sizeof(struct eth_rx_bd),
+					    &rxq->rx_bd_ring);
+
+	if (rc)
+		goto err;
+
+	/* Allocate FW completion ring */
+	rc = edev->ops->common->chain_alloc(edev->cdev,
+					    QED_CHAIN_USE_TO_CONSUME,
+					    QED_CHAIN_MODE_PBL,
+					    NUM_RX_BDS_MAX,
+					    sizeof(union eth_rx_cqe),
+					    &rxq->rx_comp_ring);
+	if (rc)
+		goto err;
+
+	/* Allocate buffers for the Rx ring */
+	for (i = 0; i < rxq->num_rx_buffers; i++) {
+		rc = qede_alloc_rx_buffer(edev, rxq);
+		if (rc)
+			break;
+	}
+	num_allocated = i;
+	if (!num_allocated) {
+		DP_ERR(edev, "Rx buffers allocation failed\n");
+		goto err;
+	} else if (num_allocated < rxq->num_rx_buffers) {
+		DP_NOTICE(edev,
+			  "Allocated less buffers than desired (%d allocated)\n",
+			  num_allocated);
+	}
+
+	return 0;
+
+err:
+	qede_free_mem_rxq(edev, rxq);
+	return -ENOMEM;
+}
+
+static void qede_free_mem_txq(struct qede_dev *edev,
+			      struct qede_tx_queue *txq)
+{
+	/* Free the parallel SW ring */
+	kfree(txq->sw_tx_ring);
+
+	/* Free the real RQ ring used by FW */
+	edev->ops->common->chain_free(edev->cdev, &txq->tx_pbl);
+}
+
+/* This function allocates all memory needed per Tx queue */
+static int qede_alloc_mem_txq(struct qede_dev *edev,
+			      struct qede_tx_queue *txq)
+{
+	int size, rc;
+	union eth_tx_bd_types *p_virt;
+
+	txq->num_tx_buffers = edev->q_num_tx_buffers;
+
+	/* Allocate the parallel driver ring for Tx buffers */
+	size = sizeof(*txq->sw_tx_ring) * NUM_TX_BDS_MAX;
+	txq->sw_tx_ring = kzalloc(size, GFP_KERNEL);
+	if (!txq->sw_tx_ring) {
+		DP_NOTICE(edev, "Tx buffers ring allocation failed\n");
+		goto err;
+	}
+
+	rc = edev->ops->common->chain_alloc(edev->cdev,
+					    QED_CHAIN_USE_TO_CONSUME_PRODUCE,
+					    QED_CHAIN_MODE_PBL,
+					    NUM_TX_BDS_MAX,
+					    sizeof(*p_virt),
+					    &txq->tx_pbl);
+	if (rc)
+		goto err;
+
+	return 0;
+
+err:
+	qede_free_mem_txq(edev, txq);
+	return -ENOMEM;
+}
+
+/* This function frees all memory of a single fp */
+static void qede_free_mem_fp(struct qede_dev *edev,
+			     struct qede_fastpath *fp)
+{
+	int tc;
+
+	qede_free_mem_sb(edev, fp->sb_info);
+
+	qede_free_mem_rxq(edev, fp->rxq);
+
+	for (tc = 0; tc < edev->num_tc; tc++)
+		qede_free_mem_txq(edev, &fp->txqs[tc]);
+}
+
+/* This function allocates all memory needed for a single fp (i.e. an entity
+ * which contains status block, one rx queue and multiple per-TC tx queues.
+ */
+static int qede_alloc_mem_fp(struct qede_dev *edev,
+			     struct qede_fastpath *fp)
+{
+	int rc, tc;
+
+	rc = qede_alloc_mem_sb(edev, fp->sb_info, fp->rss_id);
+	if (rc)
+		goto err;
+
+	rc = qede_alloc_mem_rxq(edev, fp->rxq);
+	if (rc)
+		goto err;
+
+	for (tc = 0; tc < edev->num_tc; tc++) {
+		rc = qede_alloc_mem_txq(edev, &fp->txqs[tc]);
+		if (rc)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	qede_free_mem_fp(edev, fp);
+	return -ENOMEM;
+}
+
+static void qede_free_mem_load(struct qede_dev *edev)
+{
+	int i;
+
+	for_each_rss(i) {
+		struct qede_fastpath *fp = &edev->fp_array[i];
+
+		qede_free_mem_fp(edev, fp);
+	}
+}
+
+/* This function allocates all qede memory at NIC load. */
+static int qede_alloc_mem_load(struct qede_dev *edev)
+{
+	int rc = 0, rss_id;
+
+	for (rss_id = 0; rss_id < QEDE_RSS_CNT(edev); rss_id++) {
+		struct qede_fastpath *fp = &edev->fp_array[rss_id];
+
+		rc = qede_alloc_mem_fp(edev, fp);
+		if (rc)
+			break;
+	}
+
+	if (rss_id != QEDE_RSS_CNT(edev)) {
+		/* Failed allocating memory for all the queues */
+		if (!rss_id) {
+			DP_ERR(edev,
+			       "Failed to allocate memory for the leading queue\n");
+			rc = -ENOMEM;
+		} else {
+			DP_NOTICE(edev,
+				  "Failed to allocate memory for all of RSS queues\n Desired: %d queues, allocated: %d queues\n",
+				  QEDE_RSS_CNT(edev), rss_id);
+		}
+		edev->num_rss = rss_id;
+	}
+
+	return 0;
+}
+
+/* This function inits fp content and resets the SB, RXQ and TXQ structures */
+static void qede_init_fp(struct qede_dev *edev)
+{
+	int rss_id, txq_index, tc;
+	struct qede_fastpath *fp;
+
+	for_each_rss(rss_id) {
+		fp = &edev->fp_array[rss_id];
+
+		fp->edev = edev;
+		fp->rss_id = rss_id;
+
+		memset((void *)&fp->napi, 0, sizeof(fp->napi));
+
+		memset((void *)fp->sb_info, 0, sizeof(*fp->sb_info));
+
+		memset((void *)fp->rxq, 0, sizeof(*fp->rxq));
+		fp->rxq->rxq_id = rss_id;
+
+		memset((void *)fp->txqs, 0, (edev->num_tc * sizeof(*fp->txqs)));
+		for (tc = 0; tc < edev->num_tc; tc++) {
+			txq_index = tc * QEDE_RSS_CNT(edev) + rss_id;
+			fp->txqs[tc].index = txq_index;
+		}
+
+		snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
+			 edev->ndev->name, rss_id);
+	}
+}
+
+static int qede_set_real_num_queues(struct qede_dev *edev)
+{
+	int rc = 0;
+
+	rc = netif_set_real_num_tx_queues(edev->ndev, QEDE_TSS_CNT(edev));
+	if (rc) {
+		DP_NOTICE(edev, "Failed to set real number of Tx queues\n");
+		return rc;
+	}
+	rc = netif_set_real_num_rx_queues(edev->ndev, QEDE_RSS_CNT(edev));
+	if (rc) {
+		DP_NOTICE(edev, "Failed to set real number of Rx queues\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void qede_napi_disable_remove(struct qede_dev *edev)
+{
+	int i;
+
+	for_each_rss(i) {
+		napi_disable(&edev->fp_array[i].napi);
+
+		netif_napi_del(&edev->fp_array[i].napi);
+	}
+}
+
+static void qede_napi_add_enable(struct qede_dev *edev)
+{
+	int i;
+
+	/* Add NAPI objects */
+	for_each_rss(i) {
+		netif_napi_add(edev->ndev, &edev->fp_array[i].napi,
+			       qede_poll, NAPI_POLL_WEIGHT);
+		napi_enable(&edev->fp_array[i].napi);
+	}
+}
+
+static void qede_sync_free_irqs(struct qede_dev *edev)
+{
+	int i;
+
+	for (i = 0; i < edev->int_info.used_cnt; i++) {
+		if (edev->int_info.msix_cnt) {
+			synchronize_irq(edev->int_info.msix[i].vector);
+			free_irq(edev->int_info.msix[i].vector,
+				 &edev->fp_array[i]);
+		} else {
+			edev->ops->common->simd_handler_clean(edev->cdev, i);
+		}
+	}
+
+	edev->int_info.used_cnt = 0;
+}
+
+static int qede_req_msix_irqs(struct qede_dev *edev)
+{
+	int i, rc;
+
+	/* Sanitize number of interrupts == number of prepared RSS queues */
+	if (QEDE_RSS_CNT(edev) > edev->int_info.msix_cnt) {
+		DP_ERR(edev,
+		       "Interrupt mismatch: %d RSS queues > %d MSI-x vectors\n",
+		       QEDE_RSS_CNT(edev), edev->int_info.msix_cnt);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < QEDE_RSS_CNT(edev); i++) {
+		rc = request_irq(edev->int_info.msix[i].vector,
+				 qede_msix_fp_int, 0, edev->fp_array[i].name,
+				 &edev->fp_array[i]);
+		if (rc) {
+			DP_ERR(edev, "Request fp %d irq failed\n", i);
+			qede_sync_free_irqs(edev);
+			return rc;
+		}
+		DP_VERBOSE(edev, NETIF_MSG_INTR,
+			   "Requested fp irq for %s [entry %d]. Cookie is at %p\n",
+			   edev->fp_array[i].name, i,
+			   &edev->fp_array[i]);
+		edev->int_info.used_cnt++;
+	}
+
+	return 0;
+}
+
+static void qede_simd_fp_handler(void *cookie)
+{
+	struct qede_fastpath *fp = (struct qede_fastpath *)cookie;
+
+	napi_schedule_irqoff(&fp->napi);
+}
+
+static int qede_setup_irqs(struct qede_dev *edev)
+{
+	int i, rc = 0;
+
+	/* Learn Interrupt configuration */
+	rc = edev->ops->common->get_fp_int(edev->cdev, &edev->int_info);
+	if (rc)
+		return rc;
+
+	if (edev->int_info.msix_cnt) {
+		rc = qede_req_msix_irqs(edev);
+		if (rc)
+			return rc;
+		edev->ndev->irq = edev->int_info.msix[0].vector;
+	} else {
+		const struct qed_common_ops *ops;
+
+		/* qed should learn receive the RSS ids and callbacks */
+		ops = edev->ops->common;
+		for (i = 0; i < QEDE_RSS_CNT(edev); i++)
+			ops->simd_handler_config(edev->cdev,
+						 &edev->fp_array[i], i,
+						 qede_simd_fp_handler);
+		edev->int_info.used_cnt = QEDE_RSS_CNT(edev);
+	}
+	return 0;
+}
+
+static int qede_drain_txq(struct qede_dev *edev,
+			  struct qede_tx_queue *txq,
+			  bool allow_drain)
+{
+	int rc, cnt = 1000;
+
+	while (txq->sw_tx_cons != txq->sw_tx_prod) {
+		if (!cnt) {
+			if (allow_drain) {
+				DP_NOTICE(edev,
+					  "Tx queue[%d] is stuck, requesting MCP to drain\n",
+					  txq->index);
+				rc = edev->ops->common->drain(edev->cdev);
+				if (rc)
+					return rc;
+				return qede_drain_txq(edev, txq, false);
+			}
+			DP_NOTICE(edev,
+				  "Timeout waiting for tx queue[%d]: PROD=%d, CONS=%d\n",
+				  txq->index, txq->sw_tx_prod,
+				  txq->sw_tx_cons);
+			return -ENODEV;
+		}
+		cnt--;
+		usleep_range(1000, 2000);
+		barrier();
+	}
+
+	/* FW finished processing, wait for HW to transmit all tx packets */
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static int qede_stop_queues(struct qede_dev *edev)
+{
+	struct qed_update_vport_params vport_update_params;
+	struct qed_dev *cdev = edev->cdev;
+	int rc, tc, i;
+
+	/* Disable the vport */
+	memset(&vport_update_params, 0, sizeof(vport_update_params));
+	vport_update_params.vport_id = 0;
+	vport_update_params.update_vport_active_flg = 1;
+	vport_update_params.vport_active_flg = 0;
+	vport_update_params.update_rss_flg = 0;
+
+	rc = edev->ops->vport_update(cdev, &vport_update_params);
+	if (rc) {
+		DP_ERR(edev, "Failed to update vport\n");
+		return rc;
+	}
+
+	/* Flush Tx queues. If needed, request drain from MCP */
+	for_each_rss(i) {
+		struct qede_fastpath *fp = &edev->fp_array[i];
+
+		for (tc = 0; tc < edev->num_tc; tc++) {
+			struct qede_tx_queue *txq = &fp->txqs[tc];
+
+			rc = qede_drain_txq(edev, txq, true);
+			if (rc)
+				return rc;
+		}
+	}
+
+	/* Stop all Queues in reverse order*/
+	for (i = QEDE_RSS_CNT(edev) - 1; i >= 0; i--) {
+		struct qed_stop_rxq_params rx_params;
+
+		/* Stop the Tx Queue(s)*/
+		for (tc = 0; tc < edev->num_tc; tc++) {
+			struct qed_stop_txq_params tx_params;
+
+			tx_params.rss_id = i;
+			tx_params.tx_queue_id = tc * QEDE_RSS_CNT(edev) + i;
+			rc = edev->ops->q_tx_stop(cdev, &tx_params);
+			if (rc) {
+				DP_ERR(edev, "Failed to stop TXQ #%d\n",
+				       tx_params.tx_queue_id);
+				return rc;
+			}
+		}
+
+		/* Stop the Rx Queue*/
+		memset(&rx_params, 0, sizeof(rx_params));
+		rx_params.rss_id = i;
+		rx_params.rx_queue_id = i;
+
+		rc = edev->ops->q_rx_stop(cdev, &rx_params);
+		if (rc) {
+			DP_ERR(edev, "Failed to stop RXQ #%d\n", i);
+			return rc;
+		}
+	}
+
+	/* Stop the vport */
+	rc = edev->ops->vport_stop(cdev, 0);
+	if (rc)
+		DP_ERR(edev, "Failed to stop VPORT\n");
+
+	return rc;
+}
+
+static int qede_start_queues(struct qede_dev *edev)
+{
+	int rc, tc, i;
+	int vport_id = 0, drop_ttl0_flg = 1, vlan_removal_en = 1;
+	struct qed_dev *cdev = edev->cdev;
+	struct qed_update_vport_rss_params *rss_params = &edev->rss_params;
+	struct qed_update_vport_params vport_update_params;
+	struct qed_queue_start_common_params q_params;
+
+	if (!edev->num_rss) {
+		DP_ERR(edev,
+		       "Cannot update V-VPORT as active as there are no Rx queues\n");
+		return -EINVAL;
+	}
+
+	rc = edev->ops->vport_start(cdev, vport_id,
+				    edev->ndev->mtu,
+				    drop_ttl0_flg,
+				    vlan_removal_en);
+
+	if (rc) {
+		DP_ERR(edev, "Start V-PORT failed %d\n", rc);
+		return rc;
+	}
+
+	DP_VERBOSE(edev, NETIF_MSG_IFUP,
+		   "Start vport ramrod passed, vport_id = %d, MTU = %d, vlan_removal_en = %d\n",
+		   vport_id, edev->ndev->mtu + 0xe, vlan_removal_en);
+
+	for_each_rss(i) {
+		struct qede_fastpath *fp = &edev->fp_array[i];
+		dma_addr_t phys_table = fp->rxq->rx_comp_ring.pbl.p_phys_table;
+
+		memset(&q_params, 0, sizeof(q_params));
+		q_params.rss_id = i;
+		q_params.queue_id = i;
+		q_params.vport_id = 0;
+		q_params.sb = fp->sb_info->igu_sb_id;
+		q_params.sb_idx = RX_PI;
+
+		rc = edev->ops->q_rx_start(cdev, &q_params,
+					   fp->rxq->rx_buf_size,
+					   fp->rxq->rx_bd_ring.p_phys_addr,
+					   phys_table,
+					   fp->rxq->rx_comp_ring.page_cnt,
+					   &fp->rxq->hw_rxq_prod_addr);
+		if (rc) {
+			DP_ERR(edev, "Start RXQ #%d failed %d\n", i, rc);
+			return rc;
+		}
+
+		fp->rxq->hw_cons_ptr = &fp->sb_info->sb_virt->pi_array[RX_PI];
+
+		qede_update_rx_prod(edev, fp->rxq);
+
+		for (tc = 0; tc < edev->num_tc; tc++) {
+			struct qede_tx_queue *txq = &fp->txqs[tc];
+			int txq_index = tc * QEDE_RSS_CNT(edev) + i;
+
+			memset(&q_params, 0, sizeof(q_params));
+			q_params.rss_id = i;
+			q_params.queue_id = txq_index;
+			q_params.vport_id = 0;
+			q_params.sb = fp->sb_info->igu_sb_id;
+			q_params.sb_idx = TX_PI(tc);
+
+			rc = edev->ops->q_tx_start(cdev, &q_params,
+						   txq->tx_pbl.pbl.p_phys_table,
+						   txq->tx_pbl.page_cnt,
+						   &txq->doorbell_addr);
+			if (rc) {
+				DP_ERR(edev, "Start TXQ #%d failed %d\n",
+				       txq_index, rc);
+				return rc;
+			}
+
+			txq->hw_cons_ptr =
+				&fp->sb_info->sb_virt->pi_array[TX_PI(tc)];
+			SET_FIELD(txq->tx_db.data.params,
+				  ETH_DB_DATA_DEST, DB_DEST_XCM);
+			SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_AGG_CMD,
+				  DB_AGG_CMD_SET);
+			SET_FIELD(txq->tx_db.data.params,
+				  ETH_DB_DATA_AGG_VAL_SEL,
+				  DQ_XCM_ETH_TX_BD_PROD_CMD);
+
+			txq->tx_db.data.agg_flags = DQ_XCM_ETH_DQ_CF_CMD;
+		}
+	}
+
+	/* Prepare and send the vport enable */
+	memset(&vport_update_params, 0, sizeof(vport_update_params));
+	vport_update_params.vport_id = vport_id;
+	vport_update_params.update_vport_active_flg = 1;
+	vport_update_params.vport_active_flg = 1;
+
+	/* Fill struct with RSS params */
+	if (QEDE_RSS_CNT(edev) > 1) {
+		vport_update_params.update_rss_flg = 1;
+		for (i = 0; i < 128; i++)
+			rss_params->rss_ind_table[i] =
+			ethtool_rxfh_indir_default(i, QEDE_RSS_CNT(edev));
+		netdev_rss_key_fill(rss_params->rss_key,
+				    sizeof(rss_params->rss_key));
+	} else {
+		memset(rss_params, 0, sizeof(*rss_params));
+	}
+	memcpy(&vport_update_params.rss_params, rss_params,
+	       sizeof(*rss_params));
+
+	rc = edev->ops->vport_update(cdev, &vport_update_params);
+	if (rc) {
+		DP_ERR(edev, "Update V-PORT failed %d\n", rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+enum qede_unload_mode {
+	QEDE_UNLOAD_NORMAL,
+};
+
+static void qede_unload(struct qede_dev *edev, enum qede_unload_mode mode)
+{
+	int rc;
+
+	DP_INFO(edev, "Starting qede unload\n");
+
+	/* Close OS Tx */
+	netif_tx_disable(edev->ndev);
+	netif_carrier_off(edev->ndev);
+
+	rc = qede_stop_queues(edev);
+	if (rc) {
+		qede_sync_free_irqs(edev);
+		goto out;
+	}
+
+	DP_INFO(edev, "Stopped Queues\n");
+
+	edev->ops->fastpath_stop(edev->cdev);
+
+	/* Release the interrupts */
+	qede_sync_free_irqs(edev);
+	edev->ops->common->set_fp_int(edev->cdev, 0);
+
+	qede_napi_disable_remove(edev);
+
+	qede_free_mem_load(edev);
+	qede_free_fp_array(edev);
+
+out:
+	mutex_unlock(&edev->qede_lock);
+	DP_INFO(edev, "Ending qede unload\n");
+}
+
+enum qede_load_mode {
+	QEDE_LOAD_NORMAL,
+};
+
+static int qede_load(struct qede_dev *edev, enum qede_load_mode mode)
+{
+	int rc;
+
+	DP_INFO(edev, "Starting qede load\n");
+
+	rc = qede_set_num_queues(edev);
+	if (rc)
+		goto err0;
+
+	rc = qede_alloc_fp_array(edev);
+	if (rc)
+		goto err0;
+
+	qede_init_fp(edev);
+
+	rc = qede_alloc_mem_load(edev);
+	if (rc)
+		goto err1;
+	DP_INFO(edev, "Allocated %d RSS queues on %d TC/s\n",
+		QEDE_RSS_CNT(edev), edev->num_tc);
+
+	rc = qede_set_real_num_queues(edev);
+	if (rc)
+		goto err2;
+
+	qede_napi_add_enable(edev);
+	DP_INFO(edev, "Napi added and enabled\n");
+
+	rc = qede_setup_irqs(edev);
+	if (rc)
+		goto err3;
+	DP_INFO(edev, "Setup IRQs succeeded\n");
+
+	rc = qede_start_queues(edev);
+	if (rc)
+		goto err4;
+	DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n");
+
+	/* Add primary mac and set Rx filters */
+	ether_addr_copy(edev->primary_mac, edev->ndev->dev_addr);
+
+	DP_INFO(edev, "Ending successfully qede load\n");
+
+	return 0;
+
+err4:
+	qede_sync_free_irqs(edev);
+	memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
+err3:
+	qede_napi_disable_remove(edev);
+err2:
+	qede_free_mem_load(edev);
+err1:
+	edev->ops->common->set_fp_int(edev->cdev, 0);
+	qede_free_fp_array(edev);
+	edev->num_rss = 0;
+err0:
+	return rc;
+}
+
+/* called with rtnl_lock */
+static int qede_open(struct net_device *ndev)
+{
+	struct qede_dev *edev = netdev_priv(ndev);
+
+	netif_carrier_off(ndev);
+
+	edev->ops->common->set_power_state(edev->cdev, PCI_D0);
+
+	return qede_load(edev, QEDE_LOAD_NORMAL);
+}
+
+static int qede_close(struct net_device *ndev)
+{
+	struct qede_dev *edev = netdev_priv(ndev);
+
+	qede_unload(edev, QEDE_UNLOAD_NORMAL);
+
+	return 0;
+}