From: Daniel Vetter Date: Mon, 14 Nov 2016 11:58:23 +0000 (+0100) Subject: drm: Extract drm_mode_config.[hc] X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=28575f165d36051310d7ea2350e2011f8095b6fb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm: Extract drm_mode_config.[hc] And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now only contains CRTC-related functions and structures. v2: - rebase onto drm-misc - don't forget to move drm_mode_config_cleanup. - move 2 internal decls under the right heading (Chris) Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 4edfb6d91250..a8ff2c87c0e9 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -15,25 +15,24 @@ be setup by initializing the following fields. - struct drm_mode_config_funcs \*funcs; Mode setting functions. -Modeset Base Object Abstraction -=============================== +Mode Configuration -.. kernel-doc:: include/drm/drm_mode_object.h - :internal: +KMS Core Structures and Functions +================================= -.. kernel-doc:: drivers/gpu/drm/drm_mode_object.c +.. kernel-doc:: drivers/gpu/drm/drm_mode_config.c :export: -KMS Data Structures -=================== - -.. kernel-doc:: include/drm/drm_crtc.h +.. kernel-doc:: include/drm/drm_mode_config.h :internal: -KMS API Functions -================= +Modeset Base Object Abstraction +=============================== -.. kernel-doc:: drivers/gpu/drm/drm_crtc.c +.. kernel-doc:: include/drm/drm_mode_object.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_mode_object.c :export: Atomic Mode Setting Function Reference @@ -45,6 +44,15 @@ Atomic Mode Setting Function Reference .. kernel-doc:: include/drm/drm_atomic.h :internal: +CRTC Abstraction +================ + +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c + :export: + +.. kernel-doc:: include/drm/drm_crtc.h + :internal: + Frame Buffer Abstraction ======================== diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index adcfc8f922e3..883f3e75cfbc 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -16,7 +16,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm_framebuffer.o drm_connector.o drm_blend.o \ drm_encoder.o drm_mode_object.o drm_property.o \ drm_plane.o drm_color_mgmt.o drm_print.o \ - drm_dumb_buffers.o + drm_dumb_buffers.o drm_mode_config.o drm-$(CONFIG_COMPAT) += drm_ioc32.o drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index b0827634af18..239b64c85098 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -45,18 +45,6 @@ #include "drm_crtc_internal.h" #include "drm_internal.h" -/* - * Global properties - */ -static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { - { DRM_PLANE_TYPE_OVERLAY, "Overlay" }, - { DRM_PLANE_TYPE_PRIMARY, "Primary" }, - { DRM_PLANE_TYPE_CURSOR, "Cursor" }, -}; - -/* - * Optional properties - */ /** * drm_crtc_force_disable - Forcibly turn off a CRTC * @crtc: CRTC to turn off @@ -114,7 +102,7 @@ static unsigned int drm_num_crtcs(struct drm_device *dev) return num; } -static int drm_crtc_register_all(struct drm_device *dev) +int drm_crtc_register_all(struct drm_device *dev) { struct drm_crtc *crtc; int ret = 0; @@ -133,7 +121,7 @@ static int drm_crtc_register_all(struct drm_device *dev) return 0; } -static void drm_crtc_unregister_all(struct drm_device *dev) +void drm_crtc_unregister_all(struct drm_device *dev) { struct drm_crtc *crtc; @@ -285,301 +273,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc) } EXPORT_SYMBOL(drm_crtc_cleanup); -int drm_modeset_register_all(struct drm_device *dev) -{ - int ret; - - ret = drm_plane_register_all(dev); - if (ret) - goto err_plane; - - ret = drm_crtc_register_all(dev); - if (ret) - goto err_crtc; - - ret = drm_encoder_register_all(dev); - if (ret) - goto err_encoder; - - ret = drm_connector_register_all(dev); - if (ret) - goto err_connector; - - return 0; - -err_connector: - drm_encoder_unregister_all(dev); -err_encoder: - drm_crtc_unregister_all(dev); -err_crtc: - drm_plane_unregister_all(dev); -err_plane: - return ret; -} - -void drm_modeset_unregister_all(struct drm_device *dev) -{ - drm_connector_unregister_all(dev); - drm_encoder_unregister_all(dev); - drm_crtc_unregister_all(dev); - drm_plane_unregister_all(dev); -} - -static int drm_mode_create_standard_properties(struct drm_device *dev) -{ - struct drm_property *prop; - int ret; - - ret = drm_connector_create_standard_properties(dev); - if (ret) - return ret; - - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, - "type", drm_plane_type_enum_list, - ARRAY_SIZE(drm_plane_type_enum_list)); - if (!prop) - return -ENOMEM; - dev->mode_config.plane_type_property = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "SRC_X", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_src_x = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "SRC_Y", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_src_y = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "SRC_W", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_src_w = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "SRC_H", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_src_h = prop; - - prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, - "CRTC_X", INT_MIN, INT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_crtc_x = prop; - - prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, - "CRTC_Y", INT_MIN, INT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_crtc_y = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "CRTC_W", 0, INT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_crtc_w = prop; - - prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, - "CRTC_H", 0, INT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_crtc_h = prop; - - prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, - "FB_ID", DRM_MODE_OBJECT_FB); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_fb_id = prop; - - prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, - "CRTC_ID", DRM_MODE_OBJECT_CRTC); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_crtc_id = prop; - - prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC, - "ACTIVE"); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_active = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB, - "MODE_ID", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.prop_mode_id = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_BLOB, - "DEGAMMA_LUT", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.degamma_lut_property = prop; - - prop = drm_property_create_range(dev, - DRM_MODE_PROP_IMMUTABLE, - "DEGAMMA_LUT_SIZE", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.degamma_lut_size_property = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_BLOB, - "CTM", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.ctm_property = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_BLOB, - "GAMMA_LUT", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.gamma_lut_property = prop; - - prop = drm_property_create_range(dev, - DRM_MODE_PROP_IMMUTABLE, - "GAMMA_LUT_SIZE", 0, UINT_MAX); - if (!prop) - return -ENOMEM; - dev->mode_config.gamma_lut_size_property = prop; - - return 0; -} - -/** - * drm_mode_getresources - get graphics configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Construct a set of configuration description structures and return - * them to the user, including CRTC, connector and framebuffer configuration. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getresources(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_card_res *card_res = data; - struct list_head *lh; - struct drm_framebuffer *fb; - struct drm_connector *connector; - struct drm_crtc *crtc; - struct drm_encoder *encoder; - int ret = 0; - int connector_count = 0; - int crtc_count = 0; - int fb_count = 0; - int encoder_count = 0; - int copied = 0; - uint32_t __user *fb_id; - uint32_t __user *crtc_id; - uint32_t __user *connector_id; - uint32_t __user *encoder_id; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - - mutex_lock(&file_priv->fbs_lock); - /* - * For the non-control nodes we need to limit the list of resources - * by IDs in the group list for this node - */ - list_for_each(lh, &file_priv->fbs) - fb_count++; - - /* handle this in 4 parts */ - /* FBs */ - if (card_res->count_fbs >= fb_count) { - copied = 0; - fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr; - list_for_each_entry(fb, &file_priv->fbs, filp_head) { - if (put_user(fb->base.id, fb_id + copied)) { - mutex_unlock(&file_priv->fbs_lock); - return -EFAULT; - } - copied++; - } - } - card_res->count_fbs = fb_count; - mutex_unlock(&file_priv->fbs_lock); - - /* mode_config.mutex protects the connector list against e.g. DP MST - * connector hot-adding. CRTC/Plane lists are invariant. */ - mutex_lock(&dev->mode_config.mutex); - drm_for_each_crtc(crtc, dev) - crtc_count++; - - drm_for_each_connector(connector, dev) - connector_count++; - - drm_for_each_encoder(encoder, dev) - encoder_count++; - - card_res->max_height = dev->mode_config.max_height; - card_res->min_height = dev->mode_config.min_height; - card_res->max_width = dev->mode_config.max_width; - card_res->min_width = dev->mode_config.min_width; - - /* CRTCs */ - if (card_res->count_crtcs >= crtc_count) { - copied = 0; - crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr; - drm_for_each_crtc(crtc, dev) { - if (put_user(crtc->base.id, crtc_id + copied)) { - ret = -EFAULT; - goto out; - } - copied++; - } - } - card_res->count_crtcs = crtc_count; - - /* Encoders */ - if (card_res->count_encoders >= encoder_count) { - copied = 0; - encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr; - drm_for_each_encoder(encoder, dev) { - if (put_user(encoder->base.id, encoder_id + - copied)) { - ret = -EFAULT; - goto out; - } - copied++; - } - } - card_res->count_encoders = encoder_count; - - /* Connectors */ - if (card_res->count_connectors >= connector_count) { - copied = 0; - connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr; - drm_for_each_connector(connector, dev) { - if (put_user(connector->base.id, - connector_id + copied)) { - ret = -EFAULT; - goto out; - } - copied++; - } - } - card_res->count_connectors = connector_count; - -out: - mutex_unlock(&dev->mode_config.mutex); - return ret; -} - /** * drm_mode_getcrtc - get CRTC configuration * @dev: drm device for the ioctl @@ -933,157 +626,6 @@ int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, return ret; } -/** - * drm_mode_config_reset - call ->reset callbacks - * @dev: drm device - * - * This functions calls all the crtc's, encoder's and connector's ->reset - * callback. Drivers can use this in e.g. their driver load or resume code to - * reset hardware and software state. - */ -void drm_mode_config_reset(struct drm_device *dev) -{ - struct drm_crtc *crtc; - struct drm_plane *plane; - struct drm_encoder *encoder; - struct drm_connector *connector; - - drm_for_each_plane(plane, dev) - if (plane->funcs->reset) - plane->funcs->reset(plane); - - drm_for_each_crtc(crtc, dev) - if (crtc->funcs->reset) - crtc->funcs->reset(crtc); - - drm_for_each_encoder(encoder, dev) - if (encoder->funcs->reset) - encoder->funcs->reset(encoder); - - mutex_lock(&dev->mode_config.mutex); - drm_for_each_connector(connector, dev) - if (connector->funcs->reset) - connector->funcs->reset(connector); - mutex_unlock(&dev->mode_config.mutex); -} -EXPORT_SYMBOL(drm_mode_config_reset); - -/** - * drm_mode_config_init - initialize DRM mode_configuration structure - * @dev: DRM device - * - * Initialize @dev's mode_config structure, used for tracking the graphics - * configuration of @dev. - * - * Since this initializes the modeset locks, no locking is possible. Which is no - * problem, since this should happen single threaded at init time. It is the - * driver's problem to ensure this guarantee. - * - */ -void drm_mode_config_init(struct drm_device *dev) -{ - mutex_init(&dev->mode_config.mutex); - drm_modeset_lock_init(&dev->mode_config.connection_mutex); - mutex_init(&dev->mode_config.idr_mutex); - mutex_init(&dev->mode_config.fb_lock); - mutex_init(&dev->mode_config.blob_lock); - INIT_LIST_HEAD(&dev->mode_config.fb_list); - INIT_LIST_HEAD(&dev->mode_config.crtc_list); - INIT_LIST_HEAD(&dev->mode_config.connector_list); - INIT_LIST_HEAD(&dev->mode_config.encoder_list); - INIT_LIST_HEAD(&dev->mode_config.property_list); - INIT_LIST_HEAD(&dev->mode_config.property_blob_list); - INIT_LIST_HEAD(&dev->mode_config.plane_list); - idr_init(&dev->mode_config.crtc_idr); - idr_init(&dev->mode_config.tile_idr); - ida_init(&dev->mode_config.connector_ida); - - drm_modeset_lock_all(dev); - drm_mode_create_standard_properties(dev); - drm_modeset_unlock_all(dev); - - /* Just to be sure */ - dev->mode_config.num_fb = 0; - dev->mode_config.num_connector = 0; - dev->mode_config.num_crtc = 0; - dev->mode_config.num_encoder = 0; - dev->mode_config.num_overlay_plane = 0; - dev->mode_config.num_total_plane = 0; -} -EXPORT_SYMBOL(drm_mode_config_init); - -/** - * drm_mode_config_cleanup - free up DRM mode_config info - * @dev: DRM device - * - * Free up all the connectors and CRTCs associated with this DRM device, then - * free up the framebuffers and associated buffer objects. - * - * Note that since this /should/ happen single-threaded at driver/device - * teardown time, no locking is required. It's the driver's job to ensure that - * this guarantee actually holds true. - * - * FIXME: cleanup any dangling user buffer objects too - */ -void drm_mode_config_cleanup(struct drm_device *dev) -{ - struct drm_connector *connector, *ot; - struct drm_crtc *crtc, *ct; - struct drm_encoder *encoder, *enct; - struct drm_framebuffer *fb, *fbt; - struct drm_property *property, *pt; - struct drm_property_blob *blob, *bt; - struct drm_plane *plane, *plt; - - list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list, - head) { - encoder->funcs->destroy(encoder); - } - - list_for_each_entry_safe(connector, ot, - &dev->mode_config.connector_list, head) { - connector->funcs->destroy(connector); - } - - list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, - head) { - drm_property_destroy(dev, property); - } - - list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list, - head) { - plane->funcs->destroy(plane); - } - - list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { - crtc->funcs->destroy(crtc); - } - - list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list, - head_global) { - drm_property_unreference_blob(blob); - } - - /* - * Single-threaded teardown context, so it's not required to grab the - * fb_lock to protect against concurrent fb_list access. Contrary, it - * would actually deadlock with the drm_framebuffer_cleanup function. - * - * Also, if there are any framebuffers left, that's a driver leak now, - * so politely WARN about this. - */ - WARN_ON(!list_empty(&dev->mode_config.fb_list)); - list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { - drm_framebuffer_free(&fb->base.refcount); - } - - ida_destroy(&dev->mode_config.connector_ida); - idr_destroy(&dev->mode_config.tile_idr); - idr_destroy(&dev->mode_config.crtc_idr); - drm_modeset_lock_fini(&dev->mode_config.connection_mutex); -} -EXPORT_SYMBOL(drm_mode_config_cleanup); - /** * DOC: Tile group * diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h index 64bb3eb7f806..f78d5aaf7e91 100644 --- a/drivers/gpu/drm/drm_crtc_internal.h +++ b/drivers/gpu/drm/drm_crtc_internal.h @@ -40,19 +40,26 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc, int x, int y, const struct drm_display_mode *mode, const struct drm_framebuffer *fb); - -void drm_fb_release(struct drm_file *file_priv); +int drm_crtc_register_all(struct drm_device *dev); +void drm_crtc_unregister_all(struct drm_device *dev); /* IOCTLs */ -int drm_mode_getresources(struct drm_device *dev, - void *data, struct drm_file *file_priv); int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); -/* drm_dumb_buffers.c */ + +/* drm_mode_config.c */ +int drm_modeset_register_all(struct drm_device *dev); +void drm_modeset_unregister_all(struct drm_device *dev); +/* IOCTLs */ +int drm_mode_getresources(struct drm_device *dev, + void *data, struct drm_file *file_priv); + + +/* drm_dumb_buffers.c */ /* IOCTLs */ int drm_mode_create_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -149,6 +156,8 @@ void drm_framebuffer_free(struct kref *kref); int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h, const struct drm_framebuffer *fb); +void drm_fb_release(struct drm_file *file_priv); + /* IOCTL */ int drm_mode_addfb(struct drm_device *dev, @@ -168,9 +177,6 @@ int drm_atomic_get_property(struct drm_mode_object *obj, int drm_mode_atomic_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); -int drm_modeset_register_all(struct drm_device *dev); -void drm_modeset_unregister_all(struct drm_device *dev); - /* drm_plane.c */ int drm_plane_register_all(struct drm_device *dev); diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c new file mode 100644 index 000000000000..6f80886ed40b --- /dev/null +++ b/drivers/gpu/drm/drm_mode_config.c @@ -0,0 +1,482 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include +#include + +#include "drm_crtc_internal.h" +#include "drm_internal.h" + +int drm_modeset_register_all(struct drm_device *dev) +{ + int ret; + + ret = drm_plane_register_all(dev); + if (ret) + goto err_plane; + + ret = drm_crtc_register_all(dev); + if (ret) + goto err_crtc; + + ret = drm_encoder_register_all(dev); + if (ret) + goto err_encoder; + + ret = drm_connector_register_all(dev); + if (ret) + goto err_connector; + + return 0; + +err_connector: + drm_encoder_unregister_all(dev); +err_encoder: + drm_crtc_unregister_all(dev); +err_crtc: + drm_plane_unregister_all(dev); +err_plane: + return ret; +} + +void drm_modeset_unregister_all(struct drm_device *dev) +{ + drm_connector_unregister_all(dev); + drm_encoder_unregister_all(dev); + drm_crtc_unregister_all(dev); + drm_plane_unregister_all(dev); +} + +/** + * drm_mode_getresources - get graphics configuration + * @dev: drm device for the ioctl + * @data: data pointer for the ioctl + * @file_priv: drm file for the ioctl call + * + * Construct a set of configuration description structures and return + * them to the user, including CRTC, connector and framebuffer configuration. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_getresources(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_card_res *card_res = data; + struct list_head *lh; + struct drm_framebuffer *fb; + struct drm_connector *connector; + struct drm_crtc *crtc; + struct drm_encoder *encoder; + int ret = 0; + int connector_count = 0; + int crtc_count = 0; + int fb_count = 0; + int encoder_count = 0; + int copied = 0; + uint32_t __user *fb_id; + uint32_t __user *crtc_id; + uint32_t __user *connector_id; + uint32_t __user *encoder_id; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + + mutex_lock(&file_priv->fbs_lock); + /* + * For the non-control nodes we need to limit the list of resources + * by IDs in the group list for this node + */ + list_for_each(lh, &file_priv->fbs) + fb_count++; + + /* handle this in 4 parts */ + /* FBs */ + if (card_res->count_fbs >= fb_count) { + copied = 0; + fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr; + list_for_each_entry(fb, &file_priv->fbs, filp_head) { + if (put_user(fb->base.id, fb_id + copied)) { + mutex_unlock(&file_priv->fbs_lock); + return -EFAULT; + } + copied++; + } + } + card_res->count_fbs = fb_count; + mutex_unlock(&file_priv->fbs_lock); + + /* mode_config.mutex protects the connector list against e.g. DP MST + * connector hot-adding. CRTC/Plane lists are invariant. */ + mutex_lock(&dev->mode_config.mutex); + drm_for_each_crtc(crtc, dev) + crtc_count++; + + drm_for_each_connector(connector, dev) + connector_count++; + + drm_for_each_encoder(encoder, dev) + encoder_count++; + + card_res->max_height = dev->mode_config.max_height; + card_res->min_height = dev->mode_config.min_height; + card_res->max_width = dev->mode_config.max_width; + card_res->min_width = dev->mode_config.min_width; + + /* CRTCs */ + if (card_res->count_crtcs >= crtc_count) { + copied = 0; + crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr; + drm_for_each_crtc(crtc, dev) { + if (put_user(crtc->base.id, crtc_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + card_res->count_crtcs = crtc_count; + + /* Encoders */ + if (card_res->count_encoders >= encoder_count) { + copied = 0; + encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr; + drm_for_each_encoder(encoder, dev) { + if (put_user(encoder->base.id, encoder_id + + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + card_res->count_encoders = encoder_count; + + /* Connectors */ + if (card_res->count_connectors >= connector_count) { + copied = 0; + connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr; + drm_for_each_connector(connector, dev) { + if (put_user(connector->base.id, + connector_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + card_res->count_connectors = connector_count; + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_config_reset - call ->reset callbacks + * @dev: drm device + * + * This functions calls all the crtc's, encoder's and connector's ->reset + * callback. Drivers can use this in e.g. their driver load or resume code to + * reset hardware and software state. + */ +void drm_mode_config_reset(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_plane *plane; + struct drm_encoder *encoder; + struct drm_connector *connector; + + drm_for_each_plane(plane, dev) + if (plane->funcs->reset) + plane->funcs->reset(plane); + + drm_for_each_crtc(crtc, dev) + if (crtc->funcs->reset) + crtc->funcs->reset(crtc); + + drm_for_each_encoder(encoder, dev) + if (encoder->funcs->reset) + encoder->funcs->reset(encoder); + + mutex_lock(&dev->mode_config.mutex); + drm_for_each_connector(connector, dev) + if (connector->funcs->reset) + connector->funcs->reset(connector); + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_mode_config_reset); + +/* + * Global properties + */ +static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { + { DRM_PLANE_TYPE_OVERLAY, "Overlay" }, + { DRM_PLANE_TYPE_PRIMARY, "Primary" }, + { DRM_PLANE_TYPE_CURSOR, "Cursor" }, +}; + +static int drm_mode_create_standard_properties(struct drm_device *dev) +{ + struct drm_property *prop; + int ret; + + ret = drm_connector_create_standard_properties(dev); + if (ret) + return ret; + + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, + "type", drm_plane_type_enum_list, + ARRAY_SIZE(drm_plane_type_enum_list)); + if (!prop) + return -ENOMEM; + dev->mode_config.plane_type_property = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "SRC_X", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_src_x = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "SRC_Y", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_src_y = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "SRC_W", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_src_w = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "SRC_H", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_src_h = prop; + + prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, + "CRTC_X", INT_MIN, INT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_crtc_x = prop; + + prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, + "CRTC_Y", INT_MIN, INT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_crtc_y = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "CRTC_W", 0, INT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_crtc_w = prop; + + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "CRTC_H", 0, INT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_crtc_h = prop; + + prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, + "FB_ID", DRM_MODE_OBJECT_FB); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_fb_id = prop; + + prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, + "CRTC_ID", DRM_MODE_OBJECT_CRTC); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_crtc_id = prop; + + prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC, + "ACTIVE"); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_active = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB, + "MODE_ID", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_mode_id = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_BLOB, + "DEGAMMA_LUT", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.degamma_lut_property = prop; + + prop = drm_property_create_range(dev, + DRM_MODE_PROP_IMMUTABLE, + "DEGAMMA_LUT_SIZE", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.degamma_lut_size_property = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_BLOB, + "CTM", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.ctm_property = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_BLOB, + "GAMMA_LUT", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.gamma_lut_property = prop; + + prop = drm_property_create_range(dev, + DRM_MODE_PROP_IMMUTABLE, + "GAMMA_LUT_SIZE", 0, UINT_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.gamma_lut_size_property = prop; + + return 0; +} + +/** + * drm_mode_config_init - initialize DRM mode_configuration structure + * @dev: DRM device + * + * Initialize @dev's mode_config structure, used for tracking the graphics + * configuration of @dev. + * + * Since this initializes the modeset locks, no locking is possible. Which is no + * problem, since this should happen single threaded at init time. It is the + * driver's problem to ensure this guarantee. + * + */ +void drm_mode_config_init(struct drm_device *dev) +{ + mutex_init(&dev->mode_config.mutex); + drm_modeset_lock_init(&dev->mode_config.connection_mutex); + mutex_init(&dev->mode_config.idr_mutex); + mutex_init(&dev->mode_config.fb_lock); + mutex_init(&dev->mode_config.blob_lock); + INIT_LIST_HEAD(&dev->mode_config.fb_list); + INIT_LIST_HEAD(&dev->mode_config.crtc_list); + INIT_LIST_HEAD(&dev->mode_config.connector_list); + INIT_LIST_HEAD(&dev->mode_config.encoder_list); + INIT_LIST_HEAD(&dev->mode_config.property_list); + INIT_LIST_HEAD(&dev->mode_config.property_blob_list); + INIT_LIST_HEAD(&dev->mode_config.plane_list); + idr_init(&dev->mode_config.crtc_idr); + idr_init(&dev->mode_config.tile_idr); + ida_init(&dev->mode_config.connector_ida); + + drm_modeset_lock_all(dev); + drm_mode_create_standard_properties(dev); + drm_modeset_unlock_all(dev); + + /* Just to be sure */ + dev->mode_config.num_fb = 0; + dev->mode_config.num_connector = 0; + dev->mode_config.num_crtc = 0; + dev->mode_config.num_encoder = 0; + dev->mode_config.num_overlay_plane = 0; + dev->mode_config.num_total_plane = 0; +} +EXPORT_SYMBOL(drm_mode_config_init); + +/** + * drm_mode_config_cleanup - free up DRM mode_config info + * @dev: DRM device + * + * Free up all the connectors and CRTCs associated with this DRM device, then + * free up the framebuffers and associated buffer objects. + * + * Note that since this /should/ happen single-threaded at driver/device + * teardown time, no locking is required. It's the driver's job to ensure that + * this guarantee actually holds true. + * + * FIXME: cleanup any dangling user buffer objects too + */ +void drm_mode_config_cleanup(struct drm_device *dev) +{ + struct drm_connector *connector, *ot; + struct drm_crtc *crtc, *ct; + struct drm_encoder *encoder, *enct; + struct drm_framebuffer *fb, *fbt; + struct drm_property *property, *pt; + struct drm_property_blob *blob, *bt; + struct drm_plane *plane, *plt; + + list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list, + head) { + encoder->funcs->destroy(encoder); + } + + list_for_each_entry_safe(connector, ot, + &dev->mode_config.connector_list, head) { + connector->funcs->destroy(connector); + } + + list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, + head) { + drm_property_destroy(dev, property); + } + + list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list, + head) { + plane->funcs->destroy(plane); + } + + list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { + crtc->funcs->destroy(crtc); + } + + list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list, + head_global) { + drm_property_unreference_blob(blob); + } + + /* + * Single-threaded teardown context, so it's not required to grab the + * fb_lock to protect against concurrent fb_list access. Contrary, it + * would actually deadlock with the drm_framebuffer_cleanup function. + * + * Also, if there are any framebuffers left, that's a driver leak now, + * so politely WARN about this. + */ + WARN_ON(!list_empty(&dev->mode_config.fb_list)); + list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { + drm_framebuffer_free(&fb->base.refcount); + } + + ida_destroy(&dev->mode_config.connector_ida); + idr_destroy(&dev->mode_config.tile_idr); + idr_destroy(&dev->mode_config.crtc_idr); + drm_modeset_lock_fini(&dev->mode_config.connection_mutex); +} +EXPORT_SYMBOL(drm_mode_config_cleanup); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 8cca2a895981..98de488a95a5 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -48,6 +47,7 @@ #include #include #include +#include struct drm_device; struct drm_mode_set; @@ -768,616 +768,6 @@ struct drm_mode_set { size_t num_connectors; }; -/** - * struct drm_mode_config_funcs - basic driver provided mode setting functions - * - * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that - * involve drivers. - */ -struct drm_mode_config_funcs { - /** - * @fb_create: - * - * Create a new framebuffer object. The core does basic checks on the - * requested metadata, but most of that is left to the driver. See - * struct &drm_mode_fb_cmd2 for details. - * - * If the parameters are deemed valid and the backing storage objects in - * the underlying memory manager all exist, then the driver allocates - * a new &drm_framebuffer structure, subclassed to contain - * driver-specific information (like the internal native buffer object - * references). It also needs to fill out all relevant metadata, which - * should be done by calling drm_helper_mode_fill_fb_struct(). - * - * The initialization is finalized by calling drm_framebuffer_init(), - * which registers the framebuffer and makes it accessible to other - * threads. - * - * RETURNS: - * - * A new framebuffer with an initial reference count of 1 or a negative - * error code encoded with ERR_PTR(). - */ - struct drm_framebuffer *(*fb_create)(struct drm_device *dev, - struct drm_file *file_priv, - const struct drm_mode_fb_cmd2 *mode_cmd); - - /** - * @output_poll_changed: - * - * Callback used by helpers to inform the driver of output configuration - * changes. - * - * Drivers implementing fbdev emulation with the helpers can call - * drm_fb_helper_hotplug_changed from this hook to inform the fbdev - * helper of output changes. - * - * FIXME: - * - * Except that there's no vtable for device-level helper callbacks - * there's no reason this is a core function. - */ - void (*output_poll_changed)(struct drm_device *dev); - - /** - * @atomic_check: - * - * This is the only hook to validate an atomic modeset update. This - * function must reject any modeset and state changes which the hardware - * or driver doesn't support. This includes but is of course not limited - * to: - * - * - Checking that the modes, framebuffers, scaling and placement - * requirements and so on are within the limits of the hardware. - * - * - Checking that any hidden shared resources are not oversubscribed. - * This can be shared PLLs, shared lanes, overall memory bandwidth, - * display fifo space (where shared between planes or maybe even - * CRTCs). - * - * - Checking that virtualized resources exported to userspace are not - * oversubscribed. For various reasons it can make sense to expose - * more planes, crtcs or encoders than which are physically there. One - * example is dual-pipe operations (which generally should be hidden - * from userspace if when lockstepped in hardware, exposed otherwise), - * where a plane might need 1 hardware plane (if it's just on one - * pipe), 2 hardware planes (when it spans both pipes) or maybe even - * shared a hardware plane with a 2nd plane (if there's a compatible - * plane requested on the area handled by the other pipe). - * - * - Check that any transitional state is possible and that if - * requested, the update can indeed be done in the vblank period - * without temporarily disabling some functions. - * - * - Check any other constraints the driver or hardware might have. - * - * - This callback also needs to correctly fill out the &drm_crtc_state - * in this update to make sure that drm_atomic_crtc_needs_modeset() - * reflects the nature of the possible update and returns true if and - * only if the update cannot be applied without tearing within one - * vblank on that CRTC. The core uses that information to reject - * updates which require a full modeset (i.e. blanking the screen, or - * at least pausing updates for a substantial amount of time) if - * userspace has disallowed that in its request. - * - * - The driver also does not need to repeat basic input validation - * like done for the corresponding legacy entry points. The core does - * that before calling this hook. - * - * See the documentation of @atomic_commit for an exhaustive list of - * error conditions which don't have to be checked at the - * ->atomic_check() stage? - * - * See the documentation for struct &drm_atomic_state for how exactly - * an atomic modeset update is described. - * - * Drivers using the atomic helpers can implement this hook using - * drm_atomic_helper_check(), or one of the exported sub-functions of - * it. - * - * RETURNS: - * - * 0 on success or one of the below negative error codes: - * - * - -EINVAL, if any of the above constraints are violated. - * - * - -EDEADLK, when returned from an attempt to acquire an additional - * &drm_modeset_lock through drm_modeset_lock(). - * - * - -ENOMEM, if allocating additional state sub-structures failed due - * to lack of memory. - * - * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. - * This can either be due to a pending signal, or because the driver - * needs to completely bail out to recover from an exceptional - * situation like a GPU hang. From a userspace point all errors are - * treated equally. - */ - int (*atomic_check)(struct drm_device *dev, - struct drm_atomic_state *state); - - /** - * @atomic_commit: - * - * This is the only hook to commit an atomic modeset update. The core - * guarantees that @atomic_check has been called successfully before - * calling this function, and that nothing has been changed in the - * interim. - * - * See the documentation for struct &drm_atomic_state for how exactly - * an atomic modeset update is described. - * - * Drivers using the atomic helpers can implement this hook using - * drm_atomic_helper_commit(), or one of the exported sub-functions of - * it. - * - * Nonblocking commits (as indicated with the nonblock parameter) must - * do any preparatory work which might result in an unsuccessful commit - * in the context of this callback. The only exceptions are hardware - * errors resulting in -EIO. But even in that case the driver must - * ensure that the display pipe is at least running, to avoid - * compositors crashing when pageflips don't work. Anything else, - * specifically committing the update to the hardware, should be done - * without blocking the caller. For updates which do not require a - * modeset this must be guaranteed. - * - * The driver must wait for any pending rendering to the new - * framebuffers to complete before executing the flip. It should also - * wait for any pending rendering from other drivers if the underlying - * buffer is a shared dma-buf. Nonblocking commits must not wait for - * rendering in the context of this callback. - * - * An application can request to be notified when the atomic commit has - * completed. These events are per-CRTC and can be distinguished by the - * CRTC index supplied in &drm_event to userspace. - * - * The drm core will supply a struct &drm_event in the event - * member of each CRTC's &drm_crtc_state structure. See the - * documentation for &drm_crtc_state for more details about the precise - * semantics of this event. - * - * NOTE: - * - * Drivers are not allowed to shut down any display pipe successfully - * enabled through an atomic commit on their own. Doing so can result in - * compositors crashing if a page flip is suddenly rejected because the - * pipe is off. - * - * RETURNS: - * - * 0 on success or one of the below negative error codes: - * - * - -EBUSY, if a nonblocking updated is requested and there is - * an earlier updated pending. Drivers are allowed to support a queue - * of outstanding updates, but currently no driver supports that. - * Note that drivers must wait for preceding updates to complete if a - * synchronous update is requested, they are not allowed to fail the - * commit in that case. - * - * - -ENOMEM, if the driver failed to allocate memory. Specifically - * this can happen when trying to pin framebuffers, which must only - * be done when committing the state. - * - * - -ENOSPC, as a refinement of the more generic -ENOMEM to indicate - * that the driver has run out of vram, iommu space or similar GPU - * address space needed for framebuffer. - * - * - -EIO, if the hardware completely died. - * - * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. - * This can either be due to a pending signal, or because the driver - * needs to completely bail out to recover from an exceptional - * situation like a GPU hang. From a userspace point of view all errors are - * treated equally. - * - * This list is exhaustive. Specifically this hook is not allowed to - * return -EINVAL (any invalid requests should be caught in - * @atomic_check) or -EDEADLK (this function must not acquire - * additional modeset locks). - */ - int (*atomic_commit)(struct drm_device *dev, - struct drm_atomic_state *state, - bool nonblock); - - /** - * @atomic_state_alloc: - * - * This optional hook can be used by drivers that want to subclass struct - * &drm_atomic_state to be able to track their own driver-private global - * state easily. If this hook is implemented, drivers must also - * implement @atomic_state_clear and @atomic_state_free. - * - * RETURNS: - * - * A new &drm_atomic_state on success or NULL on failure. - */ - struct drm_atomic_state *(*atomic_state_alloc)(struct drm_device *dev); - - /** - * @atomic_state_clear: - * - * This hook must clear any driver private state duplicated into the - * passed-in &drm_atomic_state. This hook is called when the caller - * encountered a &drm_modeset_lock deadlock and needs to drop all - * already acquired locks as part of the deadlock avoidance dance - * implemented in drm_modeset_lock_backoff(). - * - * Any duplicated state must be invalidated since a concurrent atomic - * update might change it, and the drm atomic interfaces always apply - * updates as relative changes to the current state. - * - * Drivers that implement this must call drm_atomic_state_default_clear() - * to clear common state. - */ - void (*atomic_state_clear)(struct drm_atomic_state *state); - - /** - * @atomic_state_free: - * - * This hook needs driver private resources and the &drm_atomic_state - * itself. Note that the core first calls drm_atomic_state_clear() to - * avoid code duplicate between the clear and free hooks. - * - * Drivers that implement this must call drm_atomic_state_default_free() - * to release common resources. - */ - void (*atomic_state_free)(struct drm_atomic_state *state); -}; - -/** - * struct drm_mode_config - Mode configuration control structure - * @mutex: mutex protecting KMS related lists and structures - * @connection_mutex: ww mutex protecting connector state and routing - * @acquire_ctx: global implicit acquire context used by atomic drivers for - * legacy IOCTLs - * @fb_lock: mutex to protect fb state and lists - * @num_fb: number of fbs available - * @fb_list: list of framebuffers available - * @num_encoder: number of encoders on this device - * @encoder_list: list of encoder objects - * @num_overlay_plane: number of overlay planes on this device - * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device - * @plane_list: list of plane objects - * @num_crtc: number of CRTCs on this device - * @crtc_list: list of CRTC objects - * @property_list: list of property objects - * @min_width: minimum pixel width on this device - * @min_height: minimum pixel height on this device - * @max_width: maximum pixel width on this device - * @max_height: maximum pixel height on this device - * @funcs: core driver provided mode setting functions - * @fb_base: base address of the framebuffer - * @poll_enabled: track polling support for this device - * @poll_running: track polling status for this device - * @delayed_event: track delayed poll uevent deliver for this device - * @output_poll_work: delayed work for polling in process context - * @property_blob_list: list of all the blob property objects - * @blob_lock: mutex for blob property allocation and management - * @*_property: core property tracking - * @preferred_depth: preferred RBG pixel depth, used by fb helpers - * @prefer_shadow: hint to userspace to prefer shadow-fb rendering - * @cursor_width: hint to userspace for max cursor width - * @cursor_height: hint to userspace for max cursor height - * @helper_private: mid-layer private data - * - * Core mode resource tracking structure. All CRTC, encoders, and connectors - * enumerated by the driver are added here, as are global properties. Some - * global restrictions are also here, e.g. dimension restrictions. - */ -struct drm_mode_config { - struct mutex mutex; /* protects configuration (mode lists etc.) */ - struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */ - struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ - - /** - * @idr_mutex: - * - * Mutex for KMS ID allocation and management. Protects both @crtc_idr - * and @tile_idr. - */ - struct mutex idr_mutex; - - /** - * @crtc_idr: - * - * Main KMS ID tracking object. Use this idr for all IDs, fb, crtc, - * connector, modes - just makes life easier to have only one. - */ - struct idr crtc_idr; - - /** - * @tile_idr: - * - * Use this idr for allocating new IDs for tiled sinks like use in some - * high-res DP MST screens. - */ - struct idr tile_idr; - - struct mutex fb_lock; /* proctects global and per-file fb lists */ - int num_fb; - struct list_head fb_list; - - /** - * @num_connector: Number of connectors on this device. - */ - int num_connector; - /** - * @connector_ida: ID allocator for connector indices. - */ - struct ida connector_ida; - /** - * @connector_list: List of connector objects. - */ - struct list_head connector_list; - int num_encoder; - struct list_head encoder_list; - - /* - * Track # of overlay planes separately from # of total planes. By - * default we only advertise overlay planes to userspace; if userspace - * sets the "universal plane" capability bit, we'll go ahead and - * expose all planes. - */ - int num_overlay_plane; - int num_total_plane; - struct list_head plane_list; - - int num_crtc; - struct list_head crtc_list; - - struct list_head property_list; - - int min_width, min_height; - int max_width, max_height; - const struct drm_mode_config_funcs *funcs; - resource_size_t fb_base; - - /* output poll support */ - bool poll_enabled; - bool poll_running; - bool delayed_event; - struct delayed_work output_poll_work; - - struct mutex blob_lock; - - /* pointers to standard properties */ - struct list_head property_blob_list; - /** - * @edid_property: Default connector property to hold the EDID of the - * currently connected sink, if any. - */ - struct drm_property *edid_property; - /** - * @dpms_property: Default connector property to control the - * connector's DPMS state. - */ - struct drm_property *dpms_property; - /** - * @path_property: Default connector property to hold the DP MST path - * for the port. - */ - struct drm_property *path_property; - /** - * @tile_property: Default connector property to store the tile - * position of a tiled screen, for sinks which need to be driven with - * multiple CRTCs. - */ - struct drm_property *tile_property; - /** - * @plane_type_property: Default plane property to differentiate - * CURSOR, PRIMARY and OVERLAY legacy uses of planes. - */ - struct drm_property *plane_type_property; - /** - * @prop_src_x: Default atomic plane property for the plane source - * position in the connected &drm_framebuffer. - */ - struct drm_property *prop_src_x; - /** - * @prop_src_y: Default atomic plane property for the plane source - * position in the connected &drm_framebuffer. - */ - struct drm_property *prop_src_y; - /** - * @prop_src_w: Default atomic plane property for the plane source - * position in the connected &drm_framebuffer. - */ - struct drm_property *prop_src_w; - /** - * @prop_src_h: Default atomic plane property for the plane source - * position in the connected &drm_framebuffer. - */ - struct drm_property *prop_src_h; - /** - * @prop_crtc_x: Default atomic plane property for the plane destination - * position in the &drm_crtc is is being shown on. - */ - struct drm_property *prop_crtc_x; - /** - * @prop_crtc_y: Default atomic plane property for the plane destination - * position in the &drm_crtc is is being shown on. - */ - struct drm_property *prop_crtc_y; - /** - * @prop_crtc_w: Default atomic plane property for the plane destination - * position in the &drm_crtc is is being shown on. - */ - struct drm_property *prop_crtc_w; - /** - * @prop_crtc_h: Default atomic plane property for the plane destination - * position in the &drm_crtc is is being shown on. - */ - struct drm_property *prop_crtc_h; - /** - * @prop_fb_id: Default atomic plane property to specify the - * &drm_framebuffer. - */ - struct drm_property *prop_fb_id; - /** - * @prop_crtc_id: Default atomic plane property to specify the - * &drm_crtc. - */ - struct drm_property *prop_crtc_id; - /** - * @prop_active: Default atomic CRTC property to control the active - * state, which is the simplified implementation for DPMS in atomic - * drivers. - */ - struct drm_property *prop_active; - /** - * @prop_mode_id: Default atomic CRTC property to set the mode for a - * CRTC. A 0 mode implies that the CRTC is entirely disabled - all - * connectors must be of and active must be set to disabled, too. - */ - struct drm_property *prop_mode_id; - - /** - * @dvi_i_subconnector_property: Optional DVI-I property to - * differentiate between analog or digital mode. - */ - struct drm_property *dvi_i_subconnector_property; - /** - * @dvi_i_select_subconnector_property: Optional DVI-I property to - * select between analog or digital mode. - */ - struct drm_property *dvi_i_select_subconnector_property; - - /** - * @tv_subconnector_property: Optional TV property to differentiate - * between different TV connector types. - */ - struct drm_property *tv_subconnector_property; - /** - * @tv_select_subconnector_property: Optional TV property to select - * between different TV connector types. - */ - struct drm_property *tv_select_subconnector_property; - /** - * @tv_mode_property: Optional TV property to select - * the output TV mode. - */ - struct drm_property *tv_mode_property; - /** - * @tv_left_margin_property: Optional TV property to set the left - * margin. - */ - struct drm_property *tv_left_margin_property; - /** - * @tv_right_margin_property: Optional TV property to set the right - * margin. - */ - struct drm_property *tv_right_margin_property; - /** - * @tv_top_margin_property: Optional TV property to set the right - * margin. - */ - struct drm_property *tv_top_margin_property; - /** - * @tv_bottom_margin_property: Optional TV property to set the right - * margin. - */ - struct drm_property *tv_bottom_margin_property; - /** - * @tv_brightness_property: Optional TV property to set the - * brightness. - */ - struct drm_property *tv_brightness_property; - /** - * @tv_contrast_property: Optional TV property to set the - * contrast. - */ - struct drm_property *tv_contrast_property; - /** - * @tv_flicker_reduction_property: Optional TV property to control the - * flicker reduction mode. - */ - struct drm_property *tv_flicker_reduction_property; - /** - * @tv_overscan_property: Optional TV property to control the overscan - * setting. - */ - struct drm_property *tv_overscan_property; - /** - * @tv_saturation_property: Optional TV property to set the - * saturation. - */ - struct drm_property *tv_saturation_property; - /** - * @tv_hue_property: Optional TV property to set the hue. - */ - struct drm_property *tv_hue_property; - - /** - * @scaling_mode_property: Optional connector property to control the - * upscaling, mostly used for built-in panels. - */ - struct drm_property *scaling_mode_property; - /** - * @aspect_ratio_property: Optional connector property to control the - * HDMI infoframe aspect ratio setting. - */ - struct drm_property *aspect_ratio_property; - /** - * @degamma_lut_property: Optional CRTC property to set the LUT used to - * convert the framebuffer's colors to linear gamma. - */ - struct drm_property *degamma_lut_property; - /** - * @degamma_lut_size_property: Optional CRTC property for the size of - * the degamma LUT as supported by the driver (read-only). - */ - struct drm_property *degamma_lut_size_property; - /** - * @ctm_property: Optional CRTC property to set the - * matrix used to convert colors after the lookup in the - * degamma LUT. - */ - struct drm_property *ctm_property; - /** - * @gamma_lut_property: Optional CRTC property to set the LUT used to - * convert the colors, after the CTM matrix, to the gamma space of the - * connected screen. - */ - struct drm_property *gamma_lut_property; - /** - * @gamma_lut_size_property: Optional CRTC property for the size of the - * gamma LUT as supported by the driver (read-only). - */ - struct drm_property *gamma_lut_size_property; - - /** - * @suggested_x_property: Optional connector property with a hint for - * the position of the output on the host's screen. - */ - struct drm_property *suggested_x_property; - /** - * @suggested_y_property: Optional connector property with a hint for - * the position of the output on the host's screen. - */ - struct drm_property *suggested_y_property; - - /* dumb ioctl parameters */ - uint32_t preferred_depth, prefer_shadow; - - /** - * @async_page_flip: Does this device support async flips on the primary - * plane? - */ - bool async_page_flip; - - /** - * @allow_fb_modifiers: - * - * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call. - */ - bool allow_fb_modifiers; - - /* cursor size */ - uint32_t cursor_width, cursor_height; - - struct drm_mode_config_helper_funcs *helper_private; -}; - #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) extern __printf(6, 7) @@ -1418,10 +808,6 @@ extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, extern int drm_crtc_force_disable(struct drm_crtc *crtc); extern int drm_crtc_force_disable_all(struct drm_device *dev); -extern void drm_mode_config_init(struct drm_device *dev); -extern void drm_mode_config_reset(struct drm_device *dev); -extern void drm_mode_config_cleanup(struct drm_device *dev); - extern int drm_mode_set_config_internal(struct drm_mode_set *set); extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h new file mode 100644 index 000000000000..5d11b258512d --- /dev/null +++ b/include/drm/drm_mode_config.h @@ -0,0 +1,652 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_MODE_CONFIG_H__ +#define __DRM_MODE_CONFIG_H__ + +#include +#include +#include +#include + +#include + +struct drm_file; +struct drm_device; +struct drm_atomic_state; +struct drm_mode_fb_cmd2; + +/** + * struct drm_mode_config_funcs - basic driver provided mode setting functions + * + * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that + * involve drivers. + */ +struct drm_mode_config_funcs { + /** + * @fb_create: + * + * Create a new framebuffer object. The core does basic checks on the + * requested metadata, but most of that is left to the driver. See + * struct &drm_mode_fb_cmd2 for details. + * + * If the parameters are deemed valid and the backing storage objects in + * the underlying memory manager all exist, then the driver allocates + * a new &drm_framebuffer structure, subclassed to contain + * driver-specific information (like the internal native buffer object + * references). It also needs to fill out all relevant metadata, which + * should be done by calling drm_helper_mode_fill_fb_struct(). + * + * The initialization is finalized by calling drm_framebuffer_init(), + * which registers the framebuffer and makes it accessible to other + * threads. + * + * RETURNS: + * + * A new framebuffer with an initial reference count of 1 or a negative + * error code encoded with ERR_PTR(). + */ + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + const struct drm_mode_fb_cmd2 *mode_cmd); + + /** + * @output_poll_changed: + * + * Callback used by helpers to inform the driver of output configuration + * changes. + * + * Drivers implementing fbdev emulation with the helpers can call + * drm_fb_helper_hotplug_changed from this hook to inform the fbdev + * helper of output changes. + * + * FIXME: + * + * Except that there's no vtable for device-level helper callbacks + * there's no reason this is a core function. + */ + void (*output_poll_changed)(struct drm_device *dev); + + /** + * @atomic_check: + * + * This is the only hook to validate an atomic modeset update. This + * function must reject any modeset and state changes which the hardware + * or driver doesn't support. This includes but is of course not limited + * to: + * + * - Checking that the modes, framebuffers, scaling and placement + * requirements and so on are within the limits of the hardware. + * + * - Checking that any hidden shared resources are not oversubscribed. + * This can be shared PLLs, shared lanes, overall memory bandwidth, + * display fifo space (where shared between planes or maybe even + * CRTCs). + * + * - Checking that virtualized resources exported to userspace are not + * oversubscribed. For various reasons it can make sense to expose + * more planes, crtcs or encoders than which are physically there. One + * example is dual-pipe operations (which generally should be hidden + * from userspace if when lockstepped in hardware, exposed otherwise), + * where a plane might need 1 hardware plane (if it's just on one + * pipe), 2 hardware planes (when it spans both pipes) or maybe even + * shared a hardware plane with a 2nd plane (if there's a compatible + * plane requested on the area handled by the other pipe). + * + * - Check that any transitional state is possible and that if + * requested, the update can indeed be done in the vblank period + * without temporarily disabling some functions. + * + * - Check any other constraints the driver or hardware might have. + * + * - This callback also needs to correctly fill out the &drm_crtc_state + * in this update to make sure that drm_atomic_crtc_needs_modeset() + * reflects the nature of the possible update and returns true if and + * only if the update cannot be applied without tearing within one + * vblank on that CRTC. The core uses that information to reject + * updates which require a full modeset (i.e. blanking the screen, or + * at least pausing updates for a substantial amount of time) if + * userspace has disallowed that in its request. + * + * - The driver also does not need to repeat basic input validation + * like done for the corresponding legacy entry points. The core does + * that before calling this hook. + * + * See the documentation of @atomic_commit for an exhaustive list of + * error conditions which don't have to be checked at the + * ->atomic_check() stage? + * + * See the documentation for struct &drm_atomic_state for how exactly + * an atomic modeset update is described. + * + * Drivers using the atomic helpers can implement this hook using + * drm_atomic_helper_check(), or one of the exported sub-functions of + * it. + * + * RETURNS: + * + * 0 on success or one of the below negative error codes: + * + * - -EINVAL, if any of the above constraints are violated. + * + * - -EDEADLK, when returned from an attempt to acquire an additional + * &drm_modeset_lock through drm_modeset_lock(). + * + * - -ENOMEM, if allocating additional state sub-structures failed due + * to lack of memory. + * + * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. + * This can either be due to a pending signal, or because the driver + * needs to completely bail out to recover from an exceptional + * situation like a GPU hang. From a userspace point all errors are + * treated equally. + */ + int (*atomic_check)(struct drm_device *dev, + struct drm_atomic_state *state); + + /** + * @atomic_commit: + * + * This is the only hook to commit an atomic modeset update. The core + * guarantees that @atomic_check has been called successfully before + * calling this function, and that nothing has been changed in the + * interim. + * + * See the documentation for struct &drm_atomic_state for how exactly + * an atomic modeset update is described. + * + * Drivers using the atomic helpers can implement this hook using + * drm_atomic_helper_commit(), or one of the exported sub-functions of + * it. + * + * Nonblocking commits (as indicated with the nonblock parameter) must + * do any preparatory work which might result in an unsuccessful commit + * in the context of this callback. The only exceptions are hardware + * errors resulting in -EIO. But even in that case the driver must + * ensure that the display pipe is at least running, to avoid + * compositors crashing when pageflips don't work. Anything else, + * specifically committing the update to the hardware, should be done + * without blocking the caller. For updates which do not require a + * modeset this must be guaranteed. + * + * The driver must wait for any pending rendering to the new + * framebuffers to complete before executing the flip. It should also + * wait for any pending rendering from other drivers if the underlying + * buffer is a shared dma-buf. Nonblocking commits must not wait for + * rendering in the context of this callback. + * + * An application can request to be notified when the atomic commit has + * completed. These events are per-CRTC and can be distinguished by the + * CRTC index supplied in &drm_event to userspace. + * + * The drm core will supply a struct &drm_event in the event + * member of each CRTC's &drm_crtc_state structure. See the + * documentation for &drm_crtc_state for more details about the precise + * semantics of this event. + * + * NOTE: + * + * Drivers are not allowed to shut down any display pipe successfully + * enabled through an atomic commit on their own. Doing so can result in + * compositors crashing if a page flip is suddenly rejected because the + * pipe is off. + * + * RETURNS: + * + * 0 on success or one of the below negative error codes: + * + * - -EBUSY, if a nonblocking updated is requested and there is + * an earlier updated pending. Drivers are allowed to support a queue + * of outstanding updates, but currently no driver supports that. + * Note that drivers must wait for preceding updates to complete if a + * synchronous update is requested, they are not allowed to fail the + * commit in that case. + * + * - -ENOMEM, if the driver failed to allocate memory. Specifically + * this can happen when trying to pin framebuffers, which must only + * be done when committing the state. + * + * - -ENOSPC, as a refinement of the more generic -ENOMEM to indicate + * that the driver has run out of vram, iommu space or similar GPU + * address space needed for framebuffer. + * + * - -EIO, if the hardware completely died. + * + * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. + * This can either be due to a pending signal, or because the driver + * needs to completely bail out to recover from an exceptional + * situation like a GPU hang. From a userspace point of view all errors are + * treated equally. + * + * This list is exhaustive. Specifically this hook is not allowed to + * return -EINVAL (any invalid requests should be caught in + * @atomic_check) or -EDEADLK (this function must not acquire + * additional modeset locks). + */ + int (*atomic_commit)(struct drm_device *dev, + struct drm_atomic_state *state, + bool nonblock); + + /** + * @atomic_state_alloc: + * + * This optional hook can be used by drivers that want to subclass struct + * &drm_atomic_state to be able to track their own driver-private global + * state easily. If this hook is implemented, drivers must also + * implement @atomic_state_clear and @atomic_state_free. + * + * RETURNS: + * + * A new &drm_atomic_state on success or NULL on failure. + */ + struct drm_atomic_state *(*atomic_state_alloc)(struct drm_device *dev); + + /** + * @atomic_state_clear: + * + * This hook must clear any driver private state duplicated into the + * passed-in &drm_atomic_state. This hook is called when the caller + * encountered a &drm_modeset_lock deadlock and needs to drop all + * already acquired locks as part of the deadlock avoidance dance + * implemented in drm_modeset_lock_backoff(). + * + * Any duplicated state must be invalidated since a concurrent atomic + * update might change it, and the drm atomic interfaces always apply + * updates as relative changes to the current state. + * + * Drivers that implement this must call drm_atomic_state_default_clear() + * to clear common state. + */ + void (*atomic_state_clear)(struct drm_atomic_state *state); + + /** + * @atomic_state_free: + * + * This hook needs driver private resources and the &drm_atomic_state + * itself. Note that the core first calls drm_atomic_state_clear() to + * avoid code duplicate between the clear and free hooks. + * + * Drivers that implement this must call drm_atomic_state_default_free() + * to release common resources. + */ + void (*atomic_state_free)(struct drm_atomic_state *state); +}; + +/** + * struct drm_mode_config - Mode configuration control structure + * @mutex: mutex protecting KMS related lists and structures + * @connection_mutex: ww mutex protecting connector state and routing + * @acquire_ctx: global implicit acquire context used by atomic drivers for + * legacy IOCTLs + * @fb_lock: mutex to protect fb state and lists + * @num_fb: number of fbs available + * @fb_list: list of framebuffers available + * @num_encoder: number of encoders on this device + * @encoder_list: list of encoder objects + * @num_overlay_plane: number of overlay planes on this device + * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device + * @plane_list: list of plane objects + * @num_crtc: number of CRTCs on this device + * @crtc_list: list of CRTC objects + * @property_list: list of property objects + * @min_width: minimum pixel width on this device + * @min_height: minimum pixel height on this device + * @max_width: maximum pixel width on this device + * @max_height: maximum pixel height on this device + * @funcs: core driver provided mode setting functions + * @fb_base: base address of the framebuffer + * @poll_enabled: track polling support for this device + * @poll_running: track polling status for this device + * @delayed_event: track delayed poll uevent deliver for this device + * @output_poll_work: delayed work for polling in process context + * @property_blob_list: list of all the blob property objects + * @blob_lock: mutex for blob property allocation and management + * @*_property: core property tracking + * @preferred_depth: preferred RBG pixel depth, used by fb helpers + * @prefer_shadow: hint to userspace to prefer shadow-fb rendering + * @cursor_width: hint to userspace for max cursor width + * @cursor_height: hint to userspace for max cursor height + * @helper_private: mid-layer private data + * + * Core mode resource tracking structure. All CRTC, encoders, and connectors + * enumerated by the driver are added here, as are global properties. Some + * global restrictions are also here, e.g. dimension restrictions. + */ +struct drm_mode_config { + struct mutex mutex; /* protects configuration (mode lists etc.) */ + struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */ + struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ + + /** + * @idr_mutex: + * + * Mutex for KMS ID allocation and management. Protects both @crtc_idr + * and @tile_idr. + */ + struct mutex idr_mutex; + + /** + * @crtc_idr: + * + * Main KMS ID tracking object. Use this idr for all IDs, fb, crtc, + * connector, modes - just makes life easier to have only one. + */ + struct idr crtc_idr; + + /** + * @tile_idr: + * + * Use this idr for allocating new IDs for tiled sinks like use in some + * high-res DP MST screens. + */ + struct idr tile_idr; + + struct mutex fb_lock; /* proctects global and per-file fb lists */ + int num_fb; + struct list_head fb_list; + + /** + * @num_connector: Number of connectors on this device. + */ + int num_connector; + /** + * @connector_ida: ID allocator for connector indices. + */ + struct ida connector_ida; + /** + * @connector_list: List of connector objects. + */ + struct list_head connector_list; + int num_encoder; + struct list_head encoder_list; + + /* + * Track # of overlay planes separately from # of total planes. By + * default we only advertise overlay planes to userspace; if userspace + * sets the "universal plane" capability bit, we'll go ahead and + * expose all planes. + */ + int num_overlay_plane; + int num_total_plane; + struct list_head plane_list; + + int num_crtc; + struct list_head crtc_list; + + struct list_head property_list; + + int min_width, min_height; + int max_width, max_height; + const struct drm_mode_config_funcs *funcs; + resource_size_t fb_base; + + /* output poll support */ + bool poll_enabled; + bool poll_running; + bool delayed_event; + struct delayed_work output_poll_work; + + struct mutex blob_lock; + + /* pointers to standard properties */ + struct list_head property_blob_list; + /** + * @edid_property: Default connector property to hold the EDID of the + * currently connected sink, if any. + */ + struct drm_property *edid_property; + /** + * @dpms_property: Default connector property to control the + * connector's DPMS state. + */ + struct drm_property *dpms_property; + /** + * @path_property: Default connector property to hold the DP MST path + * for the port. + */ + struct drm_property *path_property; + /** + * @tile_property: Default connector property to store the tile + * position of a tiled screen, for sinks which need to be driven with + * multiple CRTCs. + */ + struct drm_property *tile_property; + /** + * @plane_type_property: Default plane property to differentiate + * CURSOR, PRIMARY and OVERLAY legacy uses of planes. + */ + struct drm_property *plane_type_property; + /** + * @prop_src_x: Default atomic plane property for the plane source + * position in the connected &drm_framebuffer. + */ + struct drm_property *prop_src_x; + /** + * @prop_src_y: Default atomic plane property for the plane source + * position in the connected &drm_framebuffer. + */ + struct drm_property *prop_src_y; + /** + * @prop_src_w: Default atomic plane property for the plane source + * position in the connected &drm_framebuffer. + */ + struct drm_property *prop_src_w; + /** + * @prop_src_h: Default atomic plane property for the plane source + * position in the connected &drm_framebuffer. + */ + struct drm_property *prop_src_h; + /** + * @prop_crtc_x: Default atomic plane property for the plane destination + * position in the &drm_crtc is is being shown on. + */ + struct drm_property *prop_crtc_x; + /** + * @prop_crtc_y: Default atomic plane property for the plane destination + * position in the &drm_crtc is is being shown on. + */ + struct drm_property *prop_crtc_y; + /** + * @prop_crtc_w: Default atomic plane property for the plane destination + * position in the &drm_crtc is is being shown on. + */ + struct drm_property *prop_crtc_w; + /** + * @prop_crtc_h: Default atomic plane property for the plane destination + * position in the &drm_crtc is is being shown on. + */ + struct drm_property *prop_crtc_h; + /** + * @prop_fb_id: Default atomic plane property to specify the + * &drm_framebuffer. + */ + struct drm_property *prop_fb_id; + /** + * @prop_crtc_id: Default atomic plane property to specify the + * &drm_crtc. + */ + struct drm_property *prop_crtc_id; + /** + * @prop_active: Default atomic CRTC property to control the active + * state, which is the simplified implementation for DPMS in atomic + * drivers. + */ + struct drm_property *prop_active; + /** + * @prop_mode_id: Default atomic CRTC property to set the mode for a + * CRTC. A 0 mode implies that the CRTC is entirely disabled - all + * connectors must be of and active must be set to disabled, too. + */ + struct drm_property *prop_mode_id; + + /** + * @dvi_i_subconnector_property: Optional DVI-I property to + * differentiate between analog or digital mode. + */ + struct drm_property *dvi_i_subconnector_property; + /** + * @dvi_i_select_subconnector_property: Optional DVI-I property to + * select between analog or digital mode. + */ + struct drm_property *dvi_i_select_subconnector_property; + + /** + * @tv_subconnector_property: Optional TV property to differentiate + * between different TV connector types. + */ + struct drm_property *tv_subconnector_property; + /** + * @tv_select_subconnector_property: Optional TV property to select + * between different TV connector types. + */ + struct drm_property *tv_select_subconnector_property; + /** + * @tv_mode_property: Optional TV property to select + * the output TV mode. + */ + struct drm_property *tv_mode_property; + /** + * @tv_left_margin_property: Optional TV property to set the left + * margin. + */ + struct drm_property *tv_left_margin_property; + /** + * @tv_right_margin_property: Optional TV property to set the right + * margin. + */ + struct drm_property *tv_right_margin_property; + /** + * @tv_top_margin_property: Optional TV property to set the right + * margin. + */ + struct drm_property *tv_top_margin_property; + /** + * @tv_bottom_margin_property: Optional TV property to set the right + * margin. + */ + struct drm_property *tv_bottom_margin_property; + /** + * @tv_brightness_property: Optional TV property to set the + * brightness. + */ + struct drm_property *tv_brightness_property; + /** + * @tv_contrast_property: Optional TV property to set the + * contrast. + */ + struct drm_property *tv_contrast_property; + /** + * @tv_flicker_reduction_property: Optional TV property to control the + * flicker reduction mode. + */ + struct drm_property *tv_flicker_reduction_property; + /** + * @tv_overscan_property: Optional TV property to control the overscan + * setting. + */ + struct drm_property *tv_overscan_property; + /** + * @tv_saturation_property: Optional TV property to set the + * saturation. + */ + struct drm_property *tv_saturation_property; + /** + * @tv_hue_property: Optional TV property to set the hue. + */ + struct drm_property *tv_hue_property; + + /** + * @scaling_mode_property: Optional connector property to control the + * upscaling, mostly used for built-in panels. + */ + struct drm_property *scaling_mode_property; + /** + * @aspect_ratio_property: Optional connector property to control the + * HDMI infoframe aspect ratio setting. + */ + struct drm_property *aspect_ratio_property; + /** + * @degamma_lut_property: Optional CRTC property to set the LUT used to + * convert the framebuffer's colors to linear gamma. + */ + struct drm_property *degamma_lut_property; + /** + * @degamma_lut_size_property: Optional CRTC property for the size of + * the degamma LUT as supported by the driver (read-only). + */ + struct drm_property *degamma_lut_size_property; + /** + * @ctm_property: Optional CRTC property to set the + * matrix used to convert colors after the lookup in the + * degamma LUT. + */ + struct drm_property *ctm_property; + /** + * @gamma_lut_property: Optional CRTC property to set the LUT used to + * convert the colors, after the CTM matrix, to the gamma space of the + * connected screen. + */ + struct drm_property *gamma_lut_property; + /** + * @gamma_lut_size_property: Optional CRTC property for the size of the + * gamma LUT as supported by the driver (read-only). + */ + struct drm_property *gamma_lut_size_property; + + /** + * @suggested_x_property: Optional connector property with a hint for + * the position of the output on the host's screen. + */ + struct drm_property *suggested_x_property; + /** + * @suggested_y_property: Optional connector property with a hint for + * the position of the output on the host's screen. + */ + struct drm_property *suggested_y_property; + + /* dumb ioctl parameters */ + uint32_t preferred_depth, prefer_shadow; + + /** + * @async_page_flip: Does this device support async flips on the primary + * plane? + */ + bool async_page_flip; + + /** + * @allow_fb_modifiers: + * + * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call. + */ + bool allow_fb_modifiers; + + /* cursor size */ + uint32_t cursor_width, cursor_height; + + struct drm_mode_config_helper_funcs *helper_private; +}; + +void drm_mode_config_init(struct drm_device *dev); +void drm_mode_config_reset(struct drm_device *dev); +void drm_mode_config_cleanup(struct drm_device *dev); + +#endif