From: Julia Lawall <julia@diku.dk>
Date: Mon, 29 Dec 2008 10:23:47 +0000 (+0100)
Subject: [PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2855d28a35d14e0087c48cb6f15d0446ea4c54c3;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

[PATCH 13/13] drivers/watchdog: use USB API functions rather than constants

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---

diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index afb089695da8..b5320a8e7451 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -609,9 +609,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	/* check out the endpoint: it has to be Interrupt & IN */
 	endpoint = &iface_desc->endpoint[0].desc;
 
-	if (!((endpoint->bEndpointAddress & USB_DIR_IN) &&
-	     ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-				== USB_ENDPOINT_XFER_INT))) {
+	if (!usb_endpoint_is_int_in(endpoint)) {
 		/* we didn't find a Interrupt endpoint with direction IN */
 		printk(KERN_ERR PFX "Couldn't find an INTR & IN endpoint\n");
 		return -ENODEV;