From: Sebastian Reichel Date: Tue, 28 Jul 2015 00:27:25 +0000 (-0700) Subject: Input: tsc2005 - convert to regmap X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=273cf48aa95a86ee368a10b9a2a6b0c62544ffe5;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git Input: tsc2005 - convert to regmap Convert driver so that it uses regmap instead of directly using spi_transfer for all register accesses. Signed-off-by: Sebastian Reichel Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index cb8405d40506..860d426c480e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -917,6 +917,7 @@ config TOUCHSCREEN_TSC_SERIO config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER + select REGMAP_SPI help Say Y here if you have a TSC2005 based touchscreen. diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 2a27a1f77bcb..b116ee9069ca 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -34,6 +34,7 @@ #include #include #include +#include /* * The touchscreen interface operates as follows: @@ -120,20 +121,37 @@ #define TSC2005_SPI_MAX_SPEED_HZ 10000000 #define TSC2005_PENUP_TIME_MS 40 -struct tsc2005_spi_rd { - struct spi_transfer spi_xfer; - u32 spi_tx; - u32 spi_rx; +static const struct regmap_range tsc2005_writable_ranges[] = { + regmap_reg_range(TSC2005_REG_AUX_HIGH, TSC2005_REG_CFR2), }; +static const struct regmap_access_table tsc2005_writable_table = { + .yes_ranges = tsc2005_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(tsc2005_writable_ranges), +}; + +static struct regmap_config tsc2005_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .reg_stride = 0x08, + .max_register = 0x78, + .read_flag_mask = TSC2005_REG_READ, + .write_flag_mask = TSC2005_REG_PND0, + .wr_table = &tsc2005_writable_table, + .use_single_rw = true, +}; + +struct tsc2005_data { + u16 x; + u16 y; + u16 z1; + u16 z2; +} __packed; +#define TSC2005_DATA_REGS 4 + struct tsc2005 { struct spi_device *spi; - - struct spi_message spi_read_msg; - struct tsc2005_spi_rd spi_x; - struct tsc2005_spi_rd spi_y; - struct tsc2005_spi_rd spi_z1; - struct tsc2005_spi_rd spi_z2; + struct regmap *regmap; struct input_dev *idev; char phys[32]; @@ -190,62 +208,6 @@ static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd) return 0; } -static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value) -{ - u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value; - struct spi_transfer xfer = { - .tx_buf = &tx, - .len = 4, - .bits_per_word = 24, - }; - struct spi_message msg; - int error; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - error = spi_sync(ts->spi, &msg); - if (error) { - dev_err(&ts->spi->dev, - "%s: failed, register: %x, value: %x, error: %d\n", - __func__, reg, value, error); - return error; - } - - return 0; -} - -static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last) -{ - memset(rd, 0, sizeof(*rd)); - - rd->spi_tx = (reg | TSC2005_REG_READ) << 16; - rd->spi_xfer.tx_buf = &rd->spi_tx; - rd->spi_xfer.rx_buf = &rd->spi_rx; - rd->spi_xfer.len = 4; - rd->spi_xfer.bits_per_word = 24; - rd->spi_xfer.cs_change = !last; -} - -static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value) -{ - struct tsc2005_spi_rd spi_rd; - struct spi_message msg; - int error; - - tsc2005_setup_read(&spi_rd, reg, true); - - spi_message_init(&msg); - spi_message_add_tail(&spi_rd.spi_xfer, &msg); - - error = spi_sync(ts->spi, &msg); - if (error) - return error; - - *value = spi_rd.spi_rx; - return 0; -} - static void tsc2005_update_pen_state(struct tsc2005 *ts, int x, int y, int pressure) { @@ -274,26 +236,23 @@ static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) struct tsc2005 *ts = _ts; unsigned long flags; unsigned int pressure; - u32 x, y; - u32 z1, z2; + struct tsc2005_data tsdata; int error; /* read the coordinates */ - error = spi_sync(ts->spi, &ts->spi_read_msg); + error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata, + TSC2005_DATA_REGS); if (unlikely(error)) goto out; - x = ts->spi_x.spi_rx; - y = ts->spi_y.spi_rx; - z1 = ts->spi_z1.spi_rx; - z2 = ts->spi_z2.spi_rx; - /* validate position */ - if (unlikely(x > MAX_12BIT || y > MAX_12BIT)) + if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT)) goto out; /* Skip reading if the pressure components are out of range */ - if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2)) + if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT)) + goto out; + if (unlikely(tsdata.z1 >= tsdata.z2)) goto out; /* @@ -301,8 +260,8 @@ static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) * the value before pen-up - that implies SPI fed us stale data */ if (!ts->pen_down && - ts->in_x == x && ts->in_y == y && - ts->in_z1 == z1 && ts->in_z2 == z2) { + ts->in_x == tsdata.x && ts->in_y == tsdata.y && + ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) { goto out; } @@ -310,20 +269,20 @@ static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) * At this point we are happy we have a valid and useful reading. * Remember it for later comparisons. We may now begin downsampling. */ - ts->in_x = x; - ts->in_y = y; - ts->in_z1 = z1; - ts->in_z2 = z2; + ts->in_x = tsdata.x; + ts->in_y = tsdata.y; + ts->in_z1 = tsdata.z1; + ts->in_z2 = tsdata.z2; /* Compute touch pressure resistance using equation #1 */ - pressure = x * (z2 - z1) / z1; + pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1; pressure = pressure * ts->x_plate_ohm / 4096; if (unlikely(pressure > MAX_12BIT)) goto out; spin_lock_irqsave(&ts->lock, flags); - tsc2005_update_pen_state(ts, x, y, pressure); + tsc2005_update_pen_state(ts, tsdata.x, tsdata.y, pressure); mod_timer(&ts->penup_timer, jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS)); @@ -346,9 +305,9 @@ static void tsc2005_penup_timer(unsigned long data) static void tsc2005_start_scan(struct tsc2005 *ts) { - tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); - tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); - tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); tsc2005_cmd(ts, TSC2005_CMD_NORMAL); } @@ -398,9 +357,9 @@ static ssize_t tsc2005_selftest_show(struct device *dev, { struct spi_device *spi = to_spi_device(dev); struct tsc2005 *ts = spi_get_drvdata(spi); - u16 temp_high; - u16 temp_high_orig; - u16 temp_high_test; + unsigned int temp_high; + unsigned int temp_high_orig; + unsigned int temp_high_test; bool success = true; int error; @@ -411,7 +370,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, */ __tsc2005_disable(ts); - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high_orig); if (error) { dev_warn(dev, "selftest failed: read error %d\n", error); success = false; @@ -420,14 +379,14 @@ static ssize_t tsc2005_selftest_show(struct device *dev, temp_high_test = (temp_high_orig - 1) & MAX_12BIT; - error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test); + error = regmap_write(ts->regmap, TSC2005_REG_TEMP_HIGH, temp_high_test); if (error) { dev_warn(dev, "selftest failed: write error %d\n", error); success = false; goto out; } - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); if (error) { dev_warn(dev, "selftest failed: read error %d after write\n", error); @@ -450,7 +409,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, goto out; /* test that the reset really happened */ - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); if (error) { dev_warn(dev, "selftest failed: read error %d after reset\n", error); @@ -503,7 +462,7 @@ static void tsc2005_esd_work(struct work_struct *work) { struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work); int error; - u16 r; + unsigned int r; if (!mutex_trylock(&ts->mutex)) { /* @@ -519,7 +478,7 @@ static void tsc2005_esd_work(struct work_struct *work) goto out; /* We should be able to read register without disabling interrupts. */ - error = tsc2005_read(ts, TSC2005_REG_CFR0, &r); + error = regmap_read(ts->regmap, TSC2005_REG_CFR0, &r); if (!error && !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) { goto out; @@ -583,20 +542,6 @@ static void tsc2005_close(struct input_dev *input) mutex_unlock(&ts->mutex); } -static void tsc2005_setup_spi_xfer(struct tsc2005 *ts) -{ - tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false); - tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false); - tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false); - tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true); - - spi_message_init(&ts->spi_read_msg); - spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg); -} - static int tsc2005_probe(struct spi_device *spi) { const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev); @@ -661,6 +606,10 @@ static int tsc2005_probe(struct spi_device *spi) ts->spi = spi; ts->idev = input_dev; + ts->regmap = devm_regmap_init_spi(spi, &tsc2005_regmap_config); + if (IS_ERR(ts->regmap)) + return PTR_ERR(ts->regmap); + ts->x_plate_ohm = x_plate_ohm; ts->esd_timeout = esd_timeout; @@ -700,8 +649,6 @@ static int tsc2005_probe(struct spi_device *spi) INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work); - tsc2005_setup_spi_xfer(ts); - snprintf(ts->phys, sizeof(ts->phys), "%s/input-ts", dev_name(&spi->dev));