From: H Hartley Sweeten Date: Fri, 17 Aug 2012 02:46:40 +0000 (-0700) Subject: staging: comedi: cb_pcimdas: remove forward declarations X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2682b2dc46d30cad83c880645b57fbce46ab35fa;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git staging: comedi: cb_pcimdas: remove forward declarations Move a couple of the functions in order to remove the need for the forward declarations. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index 124478d22a48..5a5f102bb97e 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -132,15 +132,124 @@ struct cb_pcimdas_private { unsigned int ao_readback[2]; }; +/* + * "instructions" read/write data in "one-shot" or "software-triggered" + * mode. + */ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + const struct cb_pcimdas_board *thisboard = comedi_board(dev); + struct cb_pcimdas_private *devpriv = dev->private; + int n, i; + unsigned int d; + unsigned int busy; + int chan = CR_CHAN(insn->chanspec); + unsigned short chanlims; + int maxchans; + + /* only support sw initiated reads from a single channel */ + + /* check channel number */ + if ((inb(devpriv->BADR3 + 2) & 0x20) == 0) /* differential mode */ + maxchans = thisboard->ai_diff_chans; + else + maxchans = thisboard->ai_se_chans; + + if (chan > (maxchans - 1)) + return -ETIMEDOUT; /* *** Wrong error code. Fixme. */ + + /* configure for sw initiated read */ + d = inb(devpriv->BADR3 + 5); + if ((d & 0x03) > 0) { /* only reset if needed. */ + d = d & 0xfd; + outb(d, devpriv->BADR3 + 5); + } + outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */ + outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */ + + /* + * write channel limits to multiplexer, set Low (bits 0-3) and + * High (bits 4-7) channels to chan. + */ + chanlims = chan | (chan << 4); + outb(chanlims, devpriv->BADR3 + 0); + + /* convert n samples */ + for (n = 0; n < insn->n; n++) { + /* trigger conversion */ + outw(0, dev->iobase + 0); + +#define TIMEOUT 1000 /* typically takes 5 loops on a lightly loaded Pentium 100MHz, */ + /* this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. */ + + /* wait for conversion to end */ + for (i = 0; i < TIMEOUT; i++) { + busy = inb(devpriv->BADR3 + 2) & 0x80; + if (!busy) + break; + } + if (i == TIMEOUT) { + printk("timeout\n"); + return -ETIMEDOUT; + } + /* read data */ + d = inw(dev->iobase + 0); + + /* mangle the data as necessary */ + /* d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. */ + + data[n] = d; + } + + /* return the number of samples read/written */ + return n; +} + static int cb_pcimdas_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + struct cb_pcimdas_private *devpriv = dev->private; + int i; + int chan = CR_CHAN(insn->chanspec); + + /* Writing a list of values to an AO channel is probably not + * very useful, but that's how the interface is defined. */ + for (i = 0; i < insn->n; i++) { + switch (chan) { + case 0: + outw(data[i] & 0x0FFF, dev->iobase + DAC0_OFFSET); + break; + case 1: + outw(data[i] & 0x0FFF, dev->iobase + DAC1_OFFSET); + break; + default: + return -1; + } + devpriv->ao_readback[chan] = data[i]; + } + + /* return the number of samples read/written */ + return i; +} + +/* AO subdevices should have a read insn as well as a write insn. + * Usually this means copying a value stored in devpriv. */ static int cb_pcimdas_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + struct cb_pcimdas_private *devpriv = dev->private; + int i; + int chan = CR_CHAN(insn->chanspec); + + for (i = 0; i < insn->n; i++) + data[i] = devpriv->ao_readback[chan]; + + return i; +} static struct pci_dev *cb_pcimdas_find_pci_dev(struct comedi_device *dev, struct comedi_devconfig *it) @@ -173,12 +282,6 @@ static struct pci_dev *cb_pcimdas_find_pci_dev(struct comedi_device *dev, return NULL; } -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ static int cb_pcimdas_attach(struct comedi_device *dev, struct comedi_devconfig *it) { @@ -282,125 +385,6 @@ static void cb_pcimdas_detach(struct comedi_device *dev) } } -/* - * "instructions" read/write data in "one-shot" or "software-triggered" - * mode. - */ -static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - const struct cb_pcimdas_board *thisboard = comedi_board(dev); - struct cb_pcimdas_private *devpriv = dev->private; - int n, i; - unsigned int d; - unsigned int busy; - int chan = CR_CHAN(insn->chanspec); - unsigned short chanlims; - int maxchans; - - /* only support sw initiated reads from a single channel */ - - /* check channel number */ - if ((inb(devpriv->BADR3 + 2) & 0x20) == 0) /* differential mode */ - maxchans = thisboard->ai_diff_chans; - else - maxchans = thisboard->ai_se_chans; - - if (chan > (maxchans - 1)) - return -ETIMEDOUT; /* *** Wrong error code. Fixme. */ - - /* configure for sw initiated read */ - d = inb(devpriv->BADR3 + 5); - if ((d & 0x03) > 0) { /* only reset if needed. */ - d = d & 0xfd; - outb(d, devpriv->BADR3 + 5); - } - outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */ - outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */ - - /* - * write channel limits to multiplexer, set Low (bits 0-3) and - * High (bits 4-7) channels to chan. - */ - chanlims = chan | (chan << 4); - outb(chanlims, devpriv->BADR3 + 0); - - /* convert n samples */ - for (n = 0; n < insn->n; n++) { - /* trigger conversion */ - outw(0, dev->iobase + 0); - -#define TIMEOUT 1000 /* typically takes 5 loops on a lightly loaded Pentium 100MHz, */ - /* this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. */ - - /* wait for conversion to end */ - for (i = 0; i < TIMEOUT; i++) { - busy = inb(devpriv->BADR3 + 2) & 0x80; - if (!busy) - break; - } - if (i == TIMEOUT) { - printk("timeout\n"); - return -ETIMEDOUT; - } - /* read data */ - d = inw(dev->iobase + 0); - - /* mangle the data as necessary */ - /* d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. */ - - data[n] = d; - } - - /* return the number of samples read/written */ - return n; -} - -static int cb_pcimdas_ao_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - struct cb_pcimdas_private *devpriv = dev->private; - int i; - int chan = CR_CHAN(insn->chanspec); - - /* Writing a list of values to an AO channel is probably not - * very useful, but that's how the interface is defined. */ - for (i = 0; i < insn->n; i++) { - switch (chan) { - case 0: - outw(data[i] & 0x0FFF, dev->iobase + DAC0_OFFSET); - break; - case 1: - outw(data[i] & 0x0FFF, dev->iobase + DAC1_OFFSET); - break; - default: - return -1; - } - devpriv->ao_readback[chan] = data[i]; - } - - /* return the number of samples read/written */ - return i; -} - -/* AO subdevices should have a read insn as well as a write insn. - * Usually this means copying a value stored in devpriv. */ -static int cb_pcimdas_ao_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - struct cb_pcimdas_private *devpriv = dev->private; - int i; - int chan = CR_CHAN(insn->chanspec); - - for (i = 0; i < insn->n; i++) - data[i] = devpriv->ao_readback[chan]; - - return i; -} - static struct comedi_driver cb_pcimdas_driver = { .driver_name = "cb_pcimdas", .module = THIS_MODULE,