From: Laurent Pinchart Date: Tue, 17 Jan 2017 08:29:09 +0000 (+0200) Subject: drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2668db37888ff63282147b00dcf54fa491831df3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY According to the PHY IP core vendor, the SVSRET signal must be asserted before resetting the PHY. Tests on RK3288 and R-Car Gen3 showed no regression, the change should thus be safe. Signed-off-by: Laurent Pinchart Reviewed-by: Jose Abreu Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-20-laurent.pinchart+renesas@ideasonboard.com --- diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c index 93e8816f1f78..4fda0717e789 100644 --- a/drivers/gpu/drm/bridge/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/dw-hdmi.c @@ -986,6 +986,10 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, int cscon) /* gen2 pddq */ dw_hdmi_phy_gen2_pddq(hdmi, 1); + /* Leave low power consumption mode by asserting SVSRET. */ + if (hdmi->phy->has_svsret) + dw_hdmi_phy_enable_svsret(hdmi, 1); + /* PHY reset. The reset signal is active high on Gen2 PHYs. */ hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); @@ -1028,11 +1032,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, int cscon) dw_hdmi_phy_gen2_txpwron(hdmi, 1); dw_hdmi_phy_gen2_pddq(hdmi, 0); - /* The DWC MHL and HDMI 2.0 PHYs need the SVSRET signal to be set. */ - if (hdmi->phy->has_svsret) - dw_hdmi_phy_enable_svsret(hdmi, 1); - - /*Wait for PHY PLL lock */ + /* Wait for PHY PLL lock */ msec = 5; do { val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;