From: Florian Fainelli Date: Sat, 6 Feb 2016 20:58:50 +0000 (-0800) Subject: net: phy: bcm7xxx: Fix bcm7xxx_config_init() check X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=258bf44364263cb6391f35ebaca3c2366655bded;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git net: phy: bcm7xxx: Fix bcm7xxx_config_init() check Since we were wrongly advertising gigabit features for these 10/100 only Ethernet PHYs, bcm7xxx_config_init() which is supposed to apply workaround would have not run since the check would be true, now that we have fixed the PHY features, remove that check since it has no reasoning to be there anymore. Fixes: e18556ee3bd83 ("net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WAR") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 524806dd0f6b..568768abe3ed 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct phy_device *phydev) phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); phy_read(phydev, MII_BCM7XXX_AUX_MODE); - /* Workaround only required for 100Mbits/sec capable PHYs */ - if (phydev->supported & PHY_GBIT_FEATURES) - return 0; - /* set shadow mode 2 */ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);