From: Suresh Reddy Date: Fri, 20 Mar 2015 10:28:25 +0000 (-0400) Subject: be2net: use PCI MMIO read instead of config read for errors X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=25848c9015964d9d97dffd48bbb88b75a25d0a1b;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git be2net: use PCI MMIO read instead of config read for errors When an EEH error occurs, the device/slot is disconnected. This condition is more reliably detected (i.e., returns all ones) with an MMIO read rather than a config read -- especially on power platforms. Hence, this patch fixes EEH error detection by replacing config reads with MMIO reads for reading the error registers. The error registers in Skyhawk-R/BE2/BE3 are accessible both via the config space and the PCICFG (BAR0) memory space. Reported-by: Gavin Shan Signed-off-by: Suresh Reddy Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 92eb0c82bb04..27b9fe99a9bd 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -424,6 +424,7 @@ struct be_adapter { u8 __iomem *csr; /* CSR BAR used only for BE2/3 */ u8 __iomem *db; /* Door Bell */ + u8 __iomem *pcicfg; /* On SH,BEx only. Shadow of PCI config space */ struct mutex mbox_lock; /* For serializing mbox cmds to BE card */ struct be_dma_mem mbox_mem; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index eb2bed92bf60..e6b790f0d9dc 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2823,14 +2823,12 @@ void be_detect_error(struct be_adapter *adapter) } } } else { - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_LOW, &ue_lo); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_HIGH, &ue_hi); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask); + ue_lo = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_LOW); + ue_hi = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_HIGH); + ue_lo_mask = ioread32(adapter->pcicfg + + PCICFG_UE_STATUS_LOW_MASK); + ue_hi_mask = ioread32(adapter->pcicfg + + PCICFG_UE_STATUS_HI_MASK); ue_lo = (ue_lo & ~ue_lo_mask); ue_hi = (ue_hi & ~ue_hi_mask); @@ -4874,24 +4872,37 @@ static int be_roce_map_pci_bars(struct be_adapter *adapter) static int be_map_pci_bars(struct be_adapter *adapter) { + struct pci_dev *pdev = adapter->pdev; u8 __iomem *addr; if (BEx_chip(adapter) && be_physfn(adapter)) { - adapter->csr = pci_iomap(adapter->pdev, 2, 0); + adapter->csr = pci_iomap(pdev, 2, 0); if (!adapter->csr) return -ENOMEM; } - addr = pci_iomap(adapter->pdev, db_bar(adapter), 0); + addr = pci_iomap(pdev, db_bar(adapter), 0); if (!addr) goto pci_map_err; adapter->db = addr; + if (skyhawk_chip(adapter) || BEx_chip(adapter)) { + if (be_physfn(adapter)) { + /* PCICFG is the 2nd BAR in BE2 */ + addr = pci_iomap(pdev, BE2_chip(adapter) ? 1 : 0, 0); + if (!addr) + goto pci_map_err; + adapter->pcicfg = addr; + } else { + adapter->pcicfg = adapter->db + SRIOV_VF_PCICFG_OFFSET; + } + } + be_roce_map_pci_bars(adapter); return 0; pci_map_err: - dev_err(&adapter->pdev->dev, "Error in mapping PCI BARs\n"); + dev_err(&pdev->dev, "Error in mapping PCI BARs\n"); be_unmap_pci_bars(adapter); return -ENOMEM; }