From: Ana Rey Date: Sun, 16 Mar 2014 19:44:23 +0000 (+0100) Subject: staging: rtl8187se: Clean-up comment line style X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=25778bbeb2ec58959db21af09e534c43ab659906;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git staging: rtl8187se: Clean-up comment line style Convert style of comments from C99-style to C89 and fix alignment in these lines as the CodingStyle recommends. Signed-off-by: Ana Rey Signed-off-by: Peter P Waskiewicz Jr --- diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 4d9e7b51599b..0543b1f3f448 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -53,8 +53,7 @@ static unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee) } /* place the MFIE rate, tag to the memory (double) poised. - * Then it updates the pointer so that - * it points after the new MFIE tag added. + * Then it updates the pointer so that it points after the new MFIE tag added. */ static void ieee80211_MFIE_Brate(struct ieee80211_device *ieee, u8 **tag_p) { @@ -98,12 +97,12 @@ static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p) { u8 *tag = *tag_p; - *tag++ = MFIE_TYPE_GENERIC; //0 + *tag++ = MFIE_TYPE_GENERIC; /* 0 */ *tag++ = 7; *tag++ = 0x00; *tag++ = 0x50; *tag++ = 0xf2; - *tag++ = 0x02;//5 + *tag++ = 0x02; /* 5 */ *tag++ = 0x00; *tag++ = 0x01; #ifdef SUPPORT_USPD @@ -296,7 +295,7 @@ inline struct sk_buff *ieee80211_probe_req(struct ieee80211_device *ieee) req = (struct ieee80211_probe_request *) skb_put(skb,sizeof(struct ieee80211_probe_request)); req->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - req->header.duration_id = 0; //FIXME: is this OK ? + req->header.duration_id = 0; /* FIXME: is this OK ? */ memset(req->header.addr1, 0xff, ETH_ALEN); memcpy(req->header.addr2, ieee->dev->dev_addr, ETH_ALEN); @@ -456,24 +455,24 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee) while(1) { - /* this function can be called in two situations - * 1- We have switched to ad-hoc mode and we are - * performing a complete syncro scan before conclude - * there are no interesting cell and to create a - * new one. In this case the link state is - * IEEE80211_NOLINK until we found an interesting cell. - * If so the ieee8021_new_net, called by the RX path - * will set the state to IEEE80211_LINKED, so we stop - * scanning - * 2- We are linked and the root uses run iwlist scan. - * So we switch to IEEE80211_LINKED_SCANNING to remember - * that we are still logically linked (not interested in - * new network events, despite for updating the net list, - * but we are temporarily 'unlinked' as the driver shall - * not filter RX frames and the channel is changing. - * So the only situation in witch are interested is to check - * if the state become LINKED because of the #1 situation - */ + /* this function can be called in two situations + * 1- We have switched to ad-hoc mode and we are + * performing a complete syncro scan before conclude + * there are no interesting cell and to create a + * new one. In this case the link state is + * IEEE80211_NOLINK until we found an interesting cell. + * If so the ieee8021_new_net, called by the RX path + * will set the state to IEEE80211_LINKED, so we stop + * scanning + * 2- We are linked and the root uses run iwlist scan. + * So we switch to IEEE80211_LINKED_SCANNING to remember + * that we are still logically linked (not interested in + * new network events, despite for updating the net list, + * but we are temporarily 'unlinked' as the driver shall + * not filter RX frames and the channel is changing. + * So the only situation in witch are interested is to check + * if the state become LINKED because of the #1 situation + */ if (ieee->state == IEEE80211_LINKED) { goto out; @@ -659,7 +658,7 @@ ieee80211_authentication_req(struct ieee80211_network *beacon, auth->header.frame_ctl = IEEE80211_STYPE_AUTH; if (challengelen) auth->header.frame_ctl |= IEEE80211_FCTL_WEP; - auth->header.duration_id = 0x013a; //FIXME + auth->header.duration_id = 0x013a; /* FIXME */ memcpy(auth->header.addr1, beacon->bssid, ETH_ALEN); memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN); @@ -705,7 +704,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, beacon_size = sizeof(struct ieee80211_probe_response)+ ssid_len - +3 //channel + +3 /* channel */ +rate_len +rate_ex_len +atim_len @@ -723,7 +722,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, memcpy (beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN); memcpy (beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN); - beacon_buf->header.duration_id = 0; //FIXME + beacon_buf->header.duration_id = 0; /* FIXME */ beacon_buf->beacon_interval = cpu_to_le16(ieee->current_network.beacon_interval); beacon_buf->capability = @@ -784,7 +783,11 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, if (wpa_ie_len) { if (ieee->iw_mode == IW_MODE_ADHOC) - {//as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. + { + /* as Windows will set pairwise key same as the group + * key which is not allowed in Linux, so set this for + * IOT issue. + */ memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4); } @@ -936,7 +939,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, u8 *tag; unsigned int wpa_len = beacon->wpa_ie_len; #if 1 - // for testing purpose + /* for testing purpose */ unsigned int rsn_len = beacon->rsn_ie_len; #endif unsigned int rate_len = ieee80211_MFIE_rate_len(ieee); @@ -947,9 +950,10 @@ ieee80211_association_req(struct ieee80211_network *beacon, int len = 0; - //[0] Notify type of encryption: WPA/WPA2 - //[1] pair wise type - //[2] authen type + /* [0] Notify type of encryption: WPA/WPA2 + * [1] pair wise type + * [2] authen type + */ if(ieee->wpax_type_set) { if (IEEE_PROTO_WPA == encry_proto) { rsn_len = 0; @@ -958,8 +962,8 @@ ieee80211_association_req(struct ieee80211_network *beacon, } } len = sizeof(struct ieee80211_assoc_request_frame)+ - + beacon->ssid_len//essid tagged val - + rate_len//rates tagged val + + beacon->ssid_len /* essid tagged val */ + + rate_len /* rates tagged val */ + wpa_len + rsn_len + wmm_info_len @@ -974,11 +978,11 @@ ieee80211_association_req(struct ieee80211_network *beacon, skb_put(skb, sizeof(struct ieee80211_assoc_request_frame)); hdr->header.frame_control = IEEE80211_STYPE_ASSOC_REQ; - hdr->header.duration_id= 37; //FIXME + hdr->header.duration_id= 37; /* FIXME */ memcpy(hdr->header.addr1, beacon->bssid, ETH_ALEN); memcpy(hdr->header.addr2, ieee->dev->dev_addr, ETH_ALEN); memcpy(hdr->header.addr3, beacon->bssid, ETH_ALEN); - memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN);//for HW security + memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN); /* for HW security */ hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS); if (beacon->capability & WLAN_CAPABILITY_PRIVACY ) @@ -989,7 +993,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, if(ieee->short_slot) hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT); - hdr->listen_interval = 0xa; //FIXME + hdr->listen_interval = 0xa; /* FIXME */ hdr->info_element.id = MFIE_TYPE_SSID; @@ -1002,8 +1006,9 @@ ieee80211_association_req(struct ieee80211_network *beacon, ieee80211_MFIE_Brate(ieee, &tag); ieee80211_MFIE_Grate(ieee, &tag); - //add rsn==0 condition for ap's mix security mode(wpa+wpa2) - //choose AES encryption as default algorithm while using mixed mode + /* add rsn==0 condition for ap's mix security mode(wpa+wpa2) + * choose AES encryption as default algorithm while using mixed mode. + */ tag = skb_put(skb,ieee->wpa_ie_len); memcpy(tag,ieee->wpa_ie,ieee->wpa_ie_len); @@ -1067,13 +1072,17 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee) ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ; IEEE80211_DEBUG_MGMT("Sending authentication request\n"); softmac_mgmt_xmit(skb, ieee); - //BUGON when you try to add_timer twice, using mod_timer may be better + /* BUGON when you try to add_timer twice, using mod_timer may + * be better. + */ if(!timer_pending(&ieee->associate_timer)){ ieee->associate_timer.expires = jiffies + (HZ / 2); add_timer(&ieee->associate_timer); } - //If call dev_kfree_skb_any,a warning will ocur.... - //KERNEL: assertion (!atomic_read(&skb->users)) failed at net/core/dev.c (1708) + /* If call dev_kfree_skb_any,a warning will ocur.... + * KERNEL: assertion (!atomic_read(&skb->users)) failed at + * net/core/dev.c (1708) + */ } } @@ -1494,7 +1503,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee) ieee->iw_mode != IW_MODE_INFRA || ieee->state != IEEE80211_LINKED)){ - //#warning CHECK_LOCK_HERE + /* #warning CHECK_LOCK_HERE */ spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2); ieee80211_sta_wakeup(ieee, 1); @@ -1526,7 +1535,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee) spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2); } }else if(sleep == 2){ -//#warning CHECK_LOCK_HERE + /* #warning CHECK_LOCK_HERE */ spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2); ieee80211_sta_wakeup(ieee,1); @@ -1624,8 +1633,8 @@ inline int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, ieee->state=IEEE80211_LINKED; ieee->assoc_id = aid; ieee->softmac_stats.rx_ass_ok++; - - if(1 == rx_stats->nic_type) //card type is 8187 + /* card type is 8187 */ + if(1 == rx_stats->nic_type) { goto associate_complete; } @@ -1647,25 +1656,27 @@ inline int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, info_element->data[2] == 0xf2 && info_element->data[3] == 0x02 && info_element->data[4] == 0x01) { - // Not care about version at present. - //WMM Parameter Element + /* Not care about version at present. + * WMM Parameter Element. + */ memcpy(ieee->current_network.wmm_param,(u8*)(info_element->data\ + 8),(info_element->len - 8)); if (((ieee->current_network.wmm_info^info_element->data[6])& \ 0x0f)||(!ieee->init_wmmparam_flag)) { - // refresh parameter element for current network - // update the register parameter for hardware + /* refresh parameter element for current network + * update the register parameter for hardware. + */ ieee->init_wmmparam_flag = 1; queue_work(ieee->wq, &ieee->wmm_param_update_wq); } - //update info_element for current network + /* update info_element for current network */ ieee->current_network.wmm_info = info_element->data[6]; } break; default: - //nothing to do at present!!! + /* nothing to do at present!!! */ break; } @@ -1674,10 +1685,10 @@ inline int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, info_element = (struct ieee80211_info_element *) &info_element->data[info_element->len]; } - if(!ieee->init_wmmparam_flag) //legacy AP, reset the AC_xx_param register + if(!ieee->init_wmmparam_flag) /* legacy AP, reset the AC_xx_param register */ { queue_work(ieee->wq,&ieee->wmm_param_update_wq); - ieee->init_wmmparam_flag = 1;//indicate AC_xx_param upated since last associate + ieee->init_wmmparam_flag = 1; /* indicate AC_xx_param upated since last associate */ } associate_complete: ieee80211_associate_complete(ieee); @@ -1735,8 +1746,8 @@ associate_complete: case IEEE80211_STYPE_DISASSOC: case IEEE80211_STYPE_DEAUTH: /* FIXME for now repeat all the association procedure - * both for disassociation and deauthentication - */ + * both for disassociation and deauthentication + */ if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) && (ieee->state == IEEE80211_LINKED) && (ieee->iw_mode == IW_MODE_INFRA) && @@ -2008,7 +2019,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) ieee->rate = 110; } - // By default, WMM function will be disabled in IBSS mode + /* By default, WMM function will be disabled in IBSS mode */ ieee->current_network.QoS_Enable = 0; ieee->current_network.atim_window = 0; @@ -2043,10 +2054,10 @@ inline void ieee80211_start_ibss(struct ieee80211_device *ieee) void ieee80211_start_bss(struct ieee80211_device *ieee) { unsigned long flags; - // - // Ref: 802.11d 11.1.3.3 - // STA shall not start a BSS unless properly formed Beacon frame including a Country IE. - // + /* Ref: 802.11d 11.1.3.3 + * STA shall not start a BSS unless properly formed Beacon frame + * including a Country IE. + */ if(IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) { if(! ieee->bGlobalDomain) @@ -2054,8 +2065,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) return; } } - /* check if we have already found the net we - * are interested in (if any). + /* check if we have already found the net we are interested in (if any). * if not (we are disassociated and we are not * in associating / authenticating phase) start the background scanning. */ @@ -2244,7 +2254,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee) ieee->last_packet_time[i] = 0; } - ieee->init_wmmparam_flag = 0;//reinitialize AC_xx_PARAM registers. + ieee->init_wmmparam_flag = 0; /* reinitialize AC_xx_PARAM registers. */ /* if the user set the MAC of the ad-hoc cell and then * switch to managed mode, shall we make sure that association @@ -2254,7 +2264,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee) switch (ieee->iw_mode) { case IW_MODE_AUTO: ieee->iw_mode = IW_MODE_INFRA; - //not set break here intentionly + /* not set break here intentionly */ case IW_MODE_INFRA: ieee80211_start_bss(ieee); break; @@ -2293,7 +2303,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee) ieee->assoc_id = 0; ieee->queue_stop = 0; ieee->scanning = 0; - ieee->softmac_features = 0; //so IEEE2100-like driver are happy + ieee->softmac_features = 0; /* so IEEE2100-like driver are happy */ ieee->wap_set = 0; ieee->ssid_set = 0; ieee->proto_started = 0; @@ -2351,7 +2361,7 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee) del_timer_sync(&ieee->associate_timer); cancel_delayed_work(&ieee->associate_retry_wq); - //add for RF power on power of + /* add for RF power on power of */ cancel_delayed_work(&ieee->GPIOChangeRFWorkItem); destroy_workqueue(ieee->wq); @@ -2359,10 +2369,7 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee) up(&ieee->wx_sem); } -/******************************************************** - * Start of WPA code. * - * this is stolen from the ipw2200 driver * - ********************************************************/ +/* Start of WPA code. This is stolen from the ipw2200 driver */ static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value) { /* This is called when wpa_supplicant loads and closes the driver @@ -2388,7 +2395,7 @@ static int ieee80211_wpa_mlme(struct ieee80211_device *ieee, int command, switch (command) { case IEEE_MLME_STA_DEAUTH: - // silently ignore + /* silently ignore */ break; case IEEE_MLME_STA_DISASSOC: @@ -2563,7 +2570,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, if (strcmp(param->u.crypt.alg, "none") == 0) { if (crypt) { sec.enabled = 0; - // FIXME FIXME + /* FIXME FIXME */ sec.level = SEC_LEVEL_0; sec.flags |= SEC_ENABLED | SEC_LEVEL; ieee80211_crypt_delayed_deinit(ieee, crypt); @@ -2571,7 +2578,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto done; } sec.enabled = 1; -// FIXME FIXME + /* FIXME FIXME */ sec.flags |= SEC_ENABLED; /* IPW HW cannot build TKIP MIC, host decryption still needed. */