From: Hannes Reinecke Date: Tue, 15 Aug 2017 06:58:08 +0000 (+0200) Subject: scsi: cciss: Drop obsolete driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=253d2464df446456c0bba5ed4137a7be0b278aa8;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git scsi: cciss: Drop obsolete driver The hpsa driver now has support for all boards the cciss driver used to support, so this patch removes the cciss driver and make hpsa an alias to cciss. Signed-off-by: Hannes Reinecke Acked-by: Don Brace Signed-off-by: Martin K. Petersen --- diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt deleted file mode 100644 index 3a5477cc456e..000000000000 --- a/Documentation/blockdev/cciss.txt +++ /dev/null @@ -1,194 +0,0 @@ -This driver is for Compaq's SMART Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SA 5300 - * SA 5i - * SA 532 - * SA 5312 - * SA 641 - * SA 642 - * SA 6400 - * SA 6400 U320 Expansion Module - * SA 6i - * SA P600 - * SA P800 - * SA E400 - * SA P400i - * SA E200 - * SA E200i - * SA E500 - * SA P700m - * SA P212 - * SA P410 - * SA P410i - * SA P411 - * SA P812 - * SA P712m - * SA P711m - -Detecting drive failures: -------------------------- - -To get the status of logical volumes and to detect physical drive -failures, you can use the cciss_vol_status program found here: -http://cciss.sourceforge.net/#cciss_utils - -Device Naming: --------------- - -If nodes are not already created in the /dev/cciss directory, run as root: - -# cd /dev -# ./MAKEDEV cciss - -You need some entries in /dev for the cciss device. The MAKEDEV script -can make device nodes for you automatically. Currently the device setup -is as follows: - -Major numbers: - 104 cciss0 - 105 cciss1 - 106 cciss2 - 105 cciss3 - 108 cciss4 - 109 cciss5 - 110 cciss6 - 111 cciss7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 - -CCISS simple mode support -------------------------- - -The "cciss_simple_mode=1" boot parameter may be used to prevent the driver -from putting the controller into "performant" mode. The difference is that -with simple mode, each command completion requires an interrupt, while with -"performant mode" (the default, and ordinarily better performing) it is -possible to have multiple command completions indicated by a single -interrupt. - -SCSI tape drive and medium changer support ------------------------------------------- - -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created. (e.g. -/dev/st0, /dev/st1, etc. See the "st" man page for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. - -Additionally, note that the driver will engage the SCSI core at init -time if any tape drives or medium changers are detected. The driver may -also be directed to dynamically engage the SCSI core via the /proc filesystem -entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is best done via a script. - -For example: - - for x in /proc/driver/cciss/cciss[0-9]* - do - echo "engage scsi" > $x - done - -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) - -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. - -Hot plug support for SCSI tape drives -------------------------------------- - -Hot plugging of SCSI tape drives is supported, with some caveats. -The cciss driver must be informed that changes to the SCSI bus -have been made. This may be done via the /proc filesystem. -For example: - - echo "rescan" > /proc/scsi/cciss0/1 - -This causes the driver to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the -driver to make note of any new or removed sequential access devices -or medium changers. The driver will output messages indicating what -devices have been added or removed and the controller, bus, target and -lun used to address the device. It then notifies the SCSI mid layer -of these changes. - -Note that the naming convention of the /proc filesystem entries -contains a number in addition to the driver name. (E.g. "cciss0" -instead of just "cciss" which you might expect.) - -Note: ONLY sequential access devices and medium changers are presented -as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, -physical SCSI disk drives are NOT presented to the SCSI mid layer. The -physical SCSI disk drives are controlled directly by the array controller -hardware and it is important to prevent the kernel from attempting to directly -access these devices too, as if the array controller were merely a SCSI -controller in the same way that we are allowing it to access SCSI tape drives. - -SCSI error handling for tape drives and medium changers -------------------------------------------------------- - -The linux SCSI mid layer provides an error handling protocol which -kicks into gear whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The cciss driver participates in this protocol to some extent. The -normal protocol is a four step process. First the device is told -to abort the command. If that doesn't work, the device is reset. -If that doesn't work, the SCSI bus is reset. If that doesn't work -the host bus adapter is reset. Because the cciss driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI mid layer, and unlike more -straightforward SCSI drivers, disk i/o continues through the block -side during the SCSI error recovery process, the cciss driver only -implements the first two of these actions, aborting the command, and -resetting the device. Additionally, most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. In -the case that the command cannot be aborted and the device cannot be -reset, the device will be set offline. - -In the event the error handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow i/o to continue until some command -is issued which positions the tape to a known position. Typically you -must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) -before i/o can proceed again to a tape drive which was reset. - -There is a cciss_tape_cmds module parameter which can be used to make cciss -allocate more commands for use by tape drives. Ordinarily only a few commands -(6) are allocated for tape drives because tape drives are slow and -infrequently used and the primary purpose of Smart Array controllers is to -act as a RAID controller for disk drives, so the vast majority of commands -are allocated for disk devices. However, if you have more than a few tape -drives attached to a smart array, the default number of commands may not be -enough (for example, if you have 8 tape drives, you could only rewind 6 -at one time with the default number of commands.) The cciss_tape_cmds module -parameter allows more commands (up to 16 more) to be allocated for use by -tape drives. For example: - - insmod cciss.ko cciss_tape_cmds=16 - -Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8 diff --git a/MAINTAINERS b/MAINTAINERS index 1bd486634f40..4507c25637c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6032,16 +6032,6 @@ F: drivers/scsi/hpsa*.[ch] F: include/linux/cciss*.h F: include/uapi/linux/cciss*.h -HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss) -M: Don Brace -L: esc.storagedev@microsemi.com -L: linux-scsi@vger.kernel.org -S: Supported -F: Documentation/blockdev/cciss.txt -F: drivers/block/cciss* -F: include/linux/cciss_ioctl.h -F: include/uapi/linux/cciss_ioctl.h - HFI1 DRIVER M: Mike Marciniszyn M: Dennis Dalessandro diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 8ddc98279c8f..898e4861488b 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -111,33 +111,6 @@ source "drivers/block/mtip32xx/Kconfig" source "drivers/block/zram/Kconfig" -config BLK_CPQ_CISS_DA - tristate "Compaq Smart Array 5xxx support" - depends on PCI - select CHECK_SIGNATURE - select BLK_SCSI_REQUEST - help - This is the driver for Compaq Smart Array 5xxx controllers. - Everyone using these boards should say Y here. - See for the current list of - boards supported by this driver, and for further information - on the use of this driver. - -config CISS_SCSI_TAPE - bool "SCSI tape drive support for Smart Array 5xxx" - depends on BLK_CPQ_CISS_DA && PROC_FS - depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA - help - When enabled (Y), this option allows SCSI tape drives and SCSI medium - changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See for more details.) - - "SCSI support" and "SCSI tape support" must also be enabled for this - option to work. - - When this option is disabled (N), the SCSI portion of the driver - is not compiled. - config BLK_DEV_DAC960 tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" depends on PCI diff --git a/drivers/block/Makefile b/drivers/block/Makefile index ec8c36897b75..1f456d86a190 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += brd.o obj-$(CONFIG_BLK_DEV_LOOP) += loop.o -obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c deleted file mode 100644 index 678af946be30..000000000000 --- a/drivers/block/cciss.c +++ /dev/null @@ -1,5415 +0,0 @@ -/* - * Disk Array driver for HP Smart Array controllers. - * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - * 02111-1307, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.26)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26) - -/* Embedded module documentation macros - see modules.h */ -MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); -MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); -MODULE_VERSION("3.6.26"); -MODULE_LICENSE("GPL"); -static int cciss_tape_cmds = 6; -module_param(cciss_tape_cmds, int, 0644); -MODULE_PARM_DESC(cciss_tape_cmds, - "number of commands to allocate for tape devices (default: 6)"); -static int cciss_simple_mode; -module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(cciss_simple_mode, - "Use 'simple mode' rather than 'performant mode'"); - -static int cciss_allow_hpsa; -module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(cciss_allow_hpsa, - "Prevent cciss driver from accessing hardware known to be " - " supported by the hpsa driver"); - -static DEFINE_MUTEX(cciss_mutex); -static struct proc_dir_entry *proc_cciss; - -#include "cciss_cmd.h" -#include "cciss.h" -#include - -/* define the PCI info for the cards we can control */ -static const struct pci_device_id cciss_pci_device_id[] = { - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS, 0x0E11, 0x4070}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C}, - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA, 0x103C, 0x3225}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3235}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3211}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3212}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, - {0,} -}; - -MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); - -/* board_id = Subsystem Device ID & Vendor ID - * product = Marketing Name for the board - * access = Address of the struct of function pointers - */ -static struct board_type products[] = { - {0x40700E11, "Smart Array 5300", &SA5_access}, - {0x40800E11, "Smart Array 5i", &SA5B_access}, - {0x40820E11, "Smart Array 532", &SA5B_access}, - {0x40830E11, "Smart Array 5312", &SA5B_access}, - {0x409A0E11, "Smart Array 641", &SA5_access}, - {0x409B0E11, "Smart Array 642", &SA5_access}, - {0x409C0E11, "Smart Array 6400", &SA5_access}, - {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, - {0x40910E11, "Smart Array 6i", &SA5_access}, - {0x3225103C, "Smart Array P600", &SA5_access}, - {0x3223103C, "Smart Array P800", &SA5_access}, - {0x3234103C, "Smart Array P400", &SA5_access}, - {0x3235103C, "Smart Array P400i", &SA5_access}, - {0x3211103C, "Smart Array E200i", &SA5_access}, - {0x3212103C, "Smart Array E200", &SA5_access}, - {0x3213103C, "Smart Array E200i", &SA5_access}, - {0x3214103C, "Smart Array E200i", &SA5_access}, - {0x3215103C, "Smart Array E200i", &SA5_access}, - {0x3237103C, "Smart Array E500", &SA5_access}, - {0x323D103C, "Smart Array P700m", &SA5_access}, -}; - -/* How long to wait (in milliseconds) for board to go into simple mode */ -#define MAX_CONFIG_WAIT 30000 -#define MAX_IOCTL_CONFIG_WAIT 1000 - -/*define how many times we will try a command because of bus resets */ -#define MAX_CMD_RETRIES 3 - -#define MAX_CTLR 32 - -/* Originally cciss driver only supports 8 major numbers */ -#define MAX_CTLR_ORIG 8 - -static ctlr_info_t *hba[MAX_CTLR]; - -static struct task_struct *cciss_scan_thread; -static DEFINE_MUTEX(scan_mutex); -static LIST_HEAD(scan_q); - -static void do_cciss_request(struct request_queue *q); -static irqreturn_t do_cciss_intx(int irq, void *dev_id); -static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id); -static int cciss_open(struct block_device *bdev, fmode_t mode); -static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode); -static void cciss_release(struct gendisk *disk, fmode_t mode); -static int cciss_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg); -static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); - -static int cciss_revalidate(struct gendisk *disk); -static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl); -static int deregister_disk(ctlr_info_t *h, int drv_index, - int clear_all, int via_ioctl); - -static void cciss_read_capacity(ctlr_info_t *h, int logvol, - sector_t *total_size, unsigned int *block_size); -static void cciss_read_capacity_16(ctlr_info_t *h, int logvol, - sector_t *total_size, unsigned int *block_size); -static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol, - sector_t total_size, - unsigned int block_size, InquiryData_struct *inq_buff, - drive_info_struct *drv); -static void cciss_interrupt_mode(ctlr_info_t *); -static int cciss_enter_simple_mode(struct ctlr_info *h); -static void start_io(ctlr_info_t *h); -static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size, - __u8 page_code, unsigned char scsi3addr[], - int cmd_type); -static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, - int attempt_retry); -static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c); - -static int add_to_scan_list(struct ctlr_info *h); -static int scan_thread(void *data); -static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c); -static void cciss_hba_release(struct device *dev); -static void cciss_device_release(struct device *dev); -static void cciss_free_gendisk(ctlr_info_t *h, int drv_index); -static void cciss_free_drive_info(ctlr_info_t *h, int drv_index); -static inline u32 next_command(ctlr_info_t *h); -static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, - u32 *cfg_base_addr, u64 *cfg_base_addr_index, - u64 *cfg_offset); -static int cciss_pci_find_memory_BAR(struct pci_dev *pdev, - unsigned long *memory_bar); -static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag); -static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable); - -/* performant mode helper functions */ -static void calc_bucket_map(int *bucket, int num_buckets, int nsgs, - int *bucket_map); -static void cciss_put_controller_into_performant_mode(ctlr_info_t *h); - -#ifdef CONFIG_PROC_FS -static void cciss_procinit(ctlr_info_t *h); -#else -static void cciss_procinit(ctlr_info_t *h) -{ -} -#endif /* CONFIG_PROC_FS */ - -#ifdef CONFIG_COMPAT -static int cciss_compat_ioctl(struct block_device *, fmode_t, - unsigned, unsigned long); -#endif - -static const struct block_device_operations cciss_fops = { - .owner = THIS_MODULE, - .open = cciss_unlocked_open, - .release = cciss_release, - .ioctl = cciss_ioctl, - .getgeo = cciss_getgeo, -#ifdef CONFIG_COMPAT - .compat_ioctl = cciss_compat_ioctl, -#endif - .revalidate_disk = cciss_revalidate, -}; - -/* set_performant_mode: Modify the tag for cciss performant - * set bit 0 for pull model, bits 3-1 for block fetch - * register number - */ -static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c) -{ - if (likely(h->transMethod & CFGTBL_Trans_Performant)) - c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); -} - -/* - * Enqueuing and dequeuing functions for cmdlists. - */ -static inline void addQ(struct list_head *list, CommandList_struct *c) -{ - list_add_tail(&c->list, list); -} - -static inline void removeQ(CommandList_struct *c) -{ - /* - * After kexec/dump some commands might still - * be in flight, which the firmware will try - * to complete. Resetting the firmware doesn't work - * with old fw revisions, so we have to mark - * them off as 'stale' to prevent the driver from - * falling over. - */ - if (WARN_ON(list_empty(&c->list))) { - c->cmd_type = CMD_MSG_STALE; - return; - } - - list_del_init(&c->list); -} - -static void enqueue_cmd_and_start_io(ctlr_info_t *h, - CommandList_struct *c) -{ - unsigned long flags; - set_performant_mode(h, c); - spin_lock_irqsave(&h->lock, flags); - addQ(&h->reqQ, c); - h->Qdepth++; - if (h->Qdepth > h->maxQsinceinit) - h->maxQsinceinit = h->Qdepth; - start_io(h); - spin_unlock_irqrestore(&h->lock, flags); -} - -static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list, - int nr_cmds) -{ - int i; - - if (!cmd_sg_list) - return; - for (i = 0; i < nr_cmds; i++) { - kfree(cmd_sg_list[i]); - cmd_sg_list[i] = NULL; - } - kfree(cmd_sg_list); -} - -static SGDescriptor_struct **cciss_allocate_sg_chain_blocks( - ctlr_info_t *h, int chainsize, int nr_cmds) -{ - int j; - SGDescriptor_struct **cmd_sg_list; - - if (chainsize <= 0) - return NULL; - - cmd_sg_list = kmalloc(sizeof(*cmd_sg_list) * nr_cmds, GFP_KERNEL); - if (!cmd_sg_list) - return NULL; - - /* Build up chain blocks for each command */ - for (j = 0; j < nr_cmds; j++) { - /* Need a block of chainsized s/g elements. */ - cmd_sg_list[j] = kmalloc((chainsize * - sizeof(*cmd_sg_list[j])), GFP_KERNEL); - if (!cmd_sg_list[j]) { - dev_err(&h->pdev->dev, "Cannot get memory " - "for s/g chains.\n"); - goto clean; - } - } - return cmd_sg_list; -clean: - cciss_free_sg_chain_blocks(cmd_sg_list, nr_cmds); - return NULL; -} - -static void cciss_unmap_sg_chain_block(ctlr_info_t *h, CommandList_struct *c) -{ - SGDescriptor_struct *chain_sg; - u64bit temp64; - - if (c->Header.SGTotal <= h->max_cmd_sgentries) - return; - - chain_sg = &c->SG[h->max_cmd_sgentries - 1]; - temp64.val32.lower = chain_sg->Addr.lower; - temp64.val32.upper = chain_sg->Addr.upper; - pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE); -} - -static int cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c, - SGDescriptor_struct *chain_block, int len) -{ - SGDescriptor_struct *chain_sg; - u64bit temp64; - - chain_sg = &c->SG[h->max_cmd_sgentries - 1]; - chain_sg->Ext = CCISS_SG_CHAIN; - chain_sg->Len = len; - temp64.val = pci_map_single(h->pdev, chain_block, len, - PCI_DMA_TODEVICE); - if (dma_mapping_error(&h->pdev->dev, temp64.val)) { - dev_warn(&h->pdev->dev, - "%s: error mapping chain block for DMA\n", - __func__); - return -1; - } - chain_sg->Addr.lower = temp64.val32.lower; - chain_sg->Addr.upper = temp64.val32.upper; - - return 0; -} - -#include "cciss_scsi.c" /* For SCSI tape support */ - -static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", - "UNKNOWN" -}; -#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1) - -#ifdef CONFIG_PROC_FS - -/* - * Report information about this controller. - */ -#define ENG_GIG 1000000000 -#define ENG_GIG_FACTOR (ENG_GIG/512) -#define ENGAGE_SCSI "engage scsi" - -static void cciss_seq_show_header(struct seq_file *seq) -{ - ctlr_info_t *h = seq->private; - - seq_printf(seq, "%s: HP %s Controller\n" - "Board ID: 0x%08lx\n" - "Firmware Version: %c%c%c%c\n" - "IRQ: %d\n" - "Logical drives: %d\n" - "Current Q depth: %d\n" - "Current # commands on controller: %d\n" - "Max Q depth since init: %d\n" - "Max # commands on controller since init: %d\n" - "Max SG entries since init: %d\n", - h->devname, - h->product_name, - (unsigned long)h->board_id, - h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], - h->firm_ver[3], (unsigned int)h->intr[h->intr_mode], - h->num_luns, - h->Qdepth, h->commands_outstanding, - h->maxQsinceinit, h->max_outstanding, h->maxSG); - -#ifdef CONFIG_CISS_SCSI_TAPE - cciss_seq_tape_report(seq, h); -#endif /* CONFIG_CISS_SCSI_TAPE */ -} - -static void *cciss_seq_start(struct seq_file *seq, loff_t *pos) -{ - ctlr_info_t *h = seq->private; - unsigned long flags; - - /* prevent displaying bogus info during configuration - * or deconfiguration of a logical volume - */ - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) { - spin_unlock_irqrestore(&h->lock, flags); - return ERR_PTR(-EBUSY); - } - h->busy_configuring = 1; - spin_unlock_irqrestore(&h->lock, flags); - - if (*pos == 0) - cciss_seq_show_header(seq); - - return pos; -} - -static int cciss_seq_show(struct seq_file *seq, void *v) -{ - sector_t vol_sz, vol_sz_frac; - ctlr_info_t *h = seq->private; - unsigned ctlr = h->ctlr; - loff_t *pos = v; - drive_info_struct *drv = h->drv[*pos]; - - if (*pos > h->highest_lun) - return 0; - - if (drv == NULL) /* it's possible for h->drv[] to have holes. */ - return 0; - - if (drv->heads == 0) - return 0; - - vol_sz = drv->nr_blocks; - vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); - vol_sz_frac *= 100; - sector_div(vol_sz_frac, ENG_GIG_FACTOR); - - if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN) - drv->raid_level = RAID_UNKNOWN; - seq_printf(seq, "cciss/c%dd%d:" - "\t%4u.%02uGB\tRAID %s\n", - ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac, - raid_label[drv->raid_level]); - return 0; -} - -static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ctlr_info_t *h = seq->private; - - if (*pos > h->highest_lun) - return NULL; - *pos += 1; - - return pos; -} - -static void cciss_seq_stop(struct seq_file *seq, void *v) -{ - ctlr_info_t *h = seq->private; - - /* Only reset h->busy_configuring if we succeeded in setting - * it during cciss_seq_start. */ - if (v == ERR_PTR(-EBUSY)) - return; - - h->busy_configuring = 0; -} - -static const struct seq_operations cciss_seq_ops = { - .start = cciss_seq_start, - .show = cciss_seq_show, - .next = cciss_seq_next, - .stop = cciss_seq_stop, -}; - -static int cciss_seq_open(struct inode *inode, struct file *file) -{ - int ret = seq_open(file, &cciss_seq_ops); - struct seq_file *seq = file->private_data; - - if (!ret) - seq->private = PDE_DATA(inode); - - return ret; -} - -static ssize_t -cciss_proc_write(struct file *file, const char __user *buf, - size_t length, loff_t *ppos) -{ - int err; - char *buffer; - -#ifndef CONFIG_CISS_SCSI_TAPE - return -EINVAL; -#endif - - if (!buf || length > PAGE_SIZE - 1) - return -EINVAL; - - buffer = memdup_user_nul(buf, length); - if (IS_ERR(buffer)) - return PTR_ERR(buffer); - -#ifdef CONFIG_CISS_SCSI_TAPE - if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) { - struct seq_file *seq = file->private_data; - ctlr_info_t *h = seq->private; - - err = cciss_engage_scsi(h); - if (err == 0) - err = length; - } else -#endif /* CONFIG_CISS_SCSI_TAPE */ - err = -EINVAL; - /* might be nice to have "disengage" too, but it's not - safely possible. (only 1 module use count, lock issues.) */ - - kfree(buffer); - return err; -} - -static const struct file_operations cciss_proc_fops = { - .owner = THIS_MODULE, - .open = cciss_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, - .write = cciss_proc_write, -}; - -static void cciss_procinit(ctlr_info_t *h) -{ - struct proc_dir_entry *pde; - - if (proc_cciss == NULL) - proc_cciss = proc_mkdir("driver/cciss", NULL); - if (!proc_cciss) - return; - pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP | - S_IROTH, proc_cciss, - &cciss_proc_fops, h); -} -#endif /* CONFIG_PROC_FS */ - -#define MAX_PRODUCT_NAME_LEN 19 - -#define to_hba(n) container_of(n, struct ctlr_info, dev) -#define to_drv(n) container_of(n, drive_info_struct, dev) - -/* List of controllers which cannot be hard reset on kexec with reset_devices */ -static u32 unresettable_controller[] = { - 0x3223103C, /* Smart Array P800 */ - 0x3234103C, /* Smart Array P400 */ - 0x3235103C, /* Smart Array P400i */ - 0x3211103C, /* Smart Array E200i */ - 0x3212103C, /* Smart Array E200 */ - 0x3213103C, /* Smart Array E200i */ - 0x3214103C, /* Smart Array E200i */ - 0x3215103C, /* Smart Array E200i */ - 0x3237103C, /* Smart Array E500 */ - 0x323D103C, /* Smart Array P700m */ - 0x40800E11, /* Smart Array 5i */ - 0x409C0E11, /* Smart Array 6400 */ - 0x409D0E11, /* Smart Array 6400 EM */ - 0x40700E11, /* Smart Array 5300 */ - 0x40820E11, /* Smart Array 532 */ - 0x40830E11, /* Smart Array 5312 */ - 0x409A0E11, /* Smart Array 641 */ - 0x409B0E11, /* Smart Array 642 */ - 0x40910E11, /* Smart Array 6i */ -}; - -/* List of controllers which cannot even be soft reset */ -static u32 soft_unresettable_controller[] = { - 0x40800E11, /* Smart Array 5i */ - 0x40700E11, /* Smart Array 5300 */ - 0x40820E11, /* Smart Array 532 */ - 0x40830E11, /* Smart Array 5312 */ - 0x409A0E11, /* Smart Array 641 */ - 0x409B0E11, /* Smart Array 642 */ - 0x40910E11, /* Smart Array 6i */ - /* Exclude 640x boards. These are two pci devices in one slot - * which share a battery backed cache module. One controls the - * cache, the other accesses the cache through the one that controls - * it. If we reset the one controlling the cache, the other will - * likely not be happy. Just forbid resetting this conjoined mess. - */ - 0x409C0E11, /* Smart Array 6400 */ - 0x409D0E11, /* Smart Array 6400 EM */ -}; - -static int ctlr_is_hard_resettable(u32 board_id) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++) - if (unresettable_controller[i] == board_id) - return 0; - return 1; -} - -static int ctlr_is_soft_resettable(u32 board_id) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++) - if (soft_unresettable_controller[i] == board_id) - return 0; - return 1; -} - -static int ctlr_is_resettable(u32 board_id) -{ - return ctlr_is_hard_resettable(board_id) || - ctlr_is_soft_resettable(board_id); -} - -static ssize_t host_show_resettable(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ctlr_info *h = to_hba(dev); - - return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id)); -} -static DEVICE_ATTR(resettable, S_IRUGO, host_show_resettable, NULL); - -static ssize_t host_store_rescan(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ctlr_info *h = to_hba(dev); - - add_to_scan_list(h); - wake_up_process(cciss_scan_thread); - wait_for_completion_interruptible(&h->scan_wait); - - return count; -} -static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); - -static ssize_t host_show_transport_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ctlr_info *h = to_hba(dev); - - return snprintf(buf, 20, "%s\n", - h->transMethod & CFGTBL_Trans_Performant ? - "performant" : "simple"); -} -static DEVICE_ATTR(transport_mode, S_IRUGO, host_show_transport_mode, NULL); - -static ssize_t dev_show_unique_id(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - __u8 sn[16]; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) - ret = -EBUSY; - else - memcpy(sn, drv->serial_no, sizeof(sn)); - spin_unlock_irqrestore(&h->lock, flags); - - if (ret) - return ret; - else - return snprintf(buf, 16 * 2 + 2, - "%02X%02X%02X%02X%02X%02X%02X%02X" - "%02X%02X%02X%02X%02X%02X%02X%02X\n", - sn[0], sn[1], sn[2], sn[3], - sn[4], sn[5], sn[6], sn[7], - sn[8], sn[9], sn[10], sn[11], - sn[12], sn[13], sn[14], sn[15]); -} -static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); - -static ssize_t dev_show_vendor(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - char vendor[VENDOR_LEN + 1]; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) - ret = -EBUSY; - else - memcpy(vendor, drv->vendor, VENDOR_LEN + 1); - spin_unlock_irqrestore(&h->lock, flags); - - if (ret) - return ret; - else - return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); -} -static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); - -static ssize_t dev_show_model(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - char model[MODEL_LEN + 1]; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) - ret = -EBUSY; - else - memcpy(model, drv->model, MODEL_LEN + 1); - spin_unlock_irqrestore(&h->lock, flags); - - if (ret) - return ret; - else - return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); -} -static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); - -static ssize_t dev_show_rev(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - char rev[REV_LEN + 1]; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) - ret = -EBUSY; - else - memcpy(rev, drv->rev, REV_LEN + 1); - spin_unlock_irqrestore(&h->lock, flags); - - if (ret) - return ret; - else - return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); -} -static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); - -static ssize_t cciss_show_lunid(struct device *dev, - struct device_attribute *attr, char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - unsigned long flags; - unsigned char lunid[8]; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) { - spin_unlock_irqrestore(&h->lock, flags); - return -EBUSY; - } - if (!drv->heads) { - spin_unlock_irqrestore(&h->lock, flags); - return -ENOTTY; - } - memcpy(lunid, drv->LunID, sizeof(lunid)); - spin_unlock_irqrestore(&h->lock, flags); - return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", - lunid[0], lunid[1], lunid[2], lunid[3], - lunid[4], lunid[5], lunid[6], lunid[7]); -} -static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); - -static ssize_t cciss_show_raid_level(struct device *dev, - struct device_attribute *attr, char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - int raid; - unsigned long flags; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) { - spin_unlock_irqrestore(&h->lock, flags); - return -EBUSY; - } - raid = drv->raid_level; - spin_unlock_irqrestore(&h->lock, flags); - if (raid < 0 || raid > RAID_UNKNOWN) - raid = RAID_UNKNOWN; - - return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n", - raid_label[raid]); -} -static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); - -static ssize_t cciss_show_usage_count(struct device *dev, - struct device_attribute *attr, char *buf) -{ - drive_info_struct *drv = to_drv(dev); - struct ctlr_info *h = to_hba(drv->dev.parent); - unsigned long flags; - int count; - - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) { - spin_unlock_irqrestore(&h->lock, flags); - return -EBUSY; - } - count = drv->usage_count; - spin_unlock_irqrestore(&h->lock, flags); - return snprintf(buf, 20, "%d\n", count); -} -static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); - -static struct attribute *cciss_host_attrs[] = { - &dev_attr_rescan.attr, - &dev_attr_resettable.attr, - &dev_attr_transport_mode.attr, - NULL -}; - -static struct attribute_group cciss_host_attr_group = { - .attrs = cciss_host_attrs, -}; - -static const struct attribute_group *cciss_host_attr_groups[] = { - &cciss_host_attr_group, - NULL -}; - -static struct device_type cciss_host_type = { - .name = "cciss_host", - .groups = cciss_host_attr_groups, - .release = cciss_hba_release, -}; - -static struct attribute *cciss_dev_attrs[] = { - &dev_attr_unique_id.attr, - &dev_attr_model.attr, - &dev_attr_vendor.attr, - &dev_attr_rev.attr, - &dev_attr_lunid.attr, - &dev_attr_raid_level.attr, - &dev_attr_usage_count.attr, - NULL -}; - -static struct attribute_group cciss_dev_attr_group = { - .attrs = cciss_dev_attrs, -}; - -static const struct attribute_group *cciss_dev_attr_groups[] = { - &cciss_dev_attr_group, - NULL -}; - -static struct device_type cciss_dev_type = { - .name = "cciss_device", - .groups = cciss_dev_attr_groups, - .release = cciss_device_release, -}; - -static struct bus_type cciss_bus_type = { - .name = "cciss", -}; - -/* - * cciss_hba_release is called when the reference count - * of h->dev goes to zero. - */ -static void cciss_hba_release(struct device *dev) -{ - /* - * nothing to do, but need this to avoid a warning - * about not having a release handler from lib/kref.c. - */ -} - -/* - * Initialize sysfs entry for each controller. This sets up and registers - * the 'cciss#' directory for each individual controller under - * /sys/bus/pci/devices//. - */ -static int cciss_create_hba_sysfs_entry(struct ctlr_info *h) -{ - device_initialize(&h->dev); - h->dev.type = &cciss_host_type; - h->dev.bus = &cciss_bus_type; - dev_set_name(&h->dev, "%s", h->devname); - h->dev.parent = &h->pdev->dev; - - return device_add(&h->dev); -} - -/* - * Remove sysfs entries for an hba. - */ -static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) -{ - device_del(&h->dev); - put_device(&h->dev); /* final put. */ -} - -/* cciss_device_release is called when the reference count - * of h->drv[x]dev goes to zero. - */ -static void cciss_device_release(struct device *dev) -{ - drive_info_struct *drv = to_drv(dev); - kfree(drv); -} - -/* - * Initialize sysfs for each logical drive. This sets up and registers - * the 'c#d#' directory for each individual logical drive under - * /sys/bus/pci/devices/drv[drv_index]->device_initialized) - return 0; - - dev = &h->drv[drv_index]->dev; - device_initialize(dev); - dev->type = &cciss_dev_type; - dev->bus = &cciss_bus_type; - dev_set_name(dev, "c%dd%d", h->ctlr, drv_index); - dev->parent = &h->dev; - h->drv[drv_index]->device_initialized = 1; - return device_add(dev); -} - -/* - * Remove sysfs entries for a logical drive. - */ -static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index, - int ctlr_exiting) -{ - struct device *dev = &h->drv[drv_index]->dev; - - /* special case for c*d0, we only destroy it on controller exit */ - if (drv_index == 0 && !ctlr_exiting) - return; - - device_del(dev); - put_device(dev); /* the "final" put. */ - h->drv[drv_index] = NULL; -} - -/* - * For operations that cannot sleep, a command block is allocated at init, - * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track - * which ones are free or in use. - */ -static CommandList_struct *cmd_alloc(ctlr_info_t *h) -{ - CommandList_struct *c; - int i; - u64bit temp64; - dma_addr_t cmd_dma_handle, err_dma_handle; - - do { - i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); - if (i == h->nr_cmds) - return NULL; - } while (test_and_set_bit(i, h->cmd_pool_bits) != 0); - c = h->cmd_pool + i; - memset(c, 0, sizeof(CommandList_struct)); - cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct); - c->err_info = h->errinfo_pool + i; - memset(c->err_info, 0, sizeof(ErrorInfo_struct)); - err_dma_handle = h->errinfo_pool_dhandle - + i * sizeof(ErrorInfo_struct); - h->nr_allocs++; - - c->cmdindex = i; - - INIT_LIST_HEAD(&c->list); - c->busaddr = (__u32) cmd_dma_handle; - temp64.val = (__u64) err_dma_handle; - c->ErrDesc.Addr.lower = temp64.val32.lower; - c->ErrDesc.Addr.upper = temp64.val32.upper; - c->ErrDesc.Len = sizeof(ErrorInfo_struct); - - c->ctlr = h->ctlr; - return c; -} - -/* allocate a command using pci_alloc_consistent, used for ioctls, - * etc., not for the main i/o path. - */ -static CommandList_struct *cmd_special_alloc(ctlr_info_t *h) -{ - CommandList_struct *c; - u64bit temp64; - dma_addr_t cmd_dma_handle, err_dma_handle; - - c = pci_zalloc_consistent(h->pdev, sizeof(CommandList_struct), - &cmd_dma_handle); - if (c == NULL) - return NULL; - - c->cmdindex = -1; - - c->err_info = pci_zalloc_consistent(h->pdev, sizeof(ErrorInfo_struct), - &err_dma_handle); - - if (c->err_info == NULL) { - pci_free_consistent(h->pdev, - sizeof(CommandList_struct), c, cmd_dma_handle); - return NULL; - } - - INIT_LIST_HEAD(&c->list); - c->busaddr = (__u32) cmd_dma_handle; - temp64.val = (__u64) err_dma_handle; - c->ErrDesc.Addr.lower = temp64.val32.lower; - c->ErrDesc.Addr.upper = temp64.val32.upper; - c->ErrDesc.Len = sizeof(ErrorInfo_struct); - - c->ctlr = h->ctlr; - return c; -} - -static void cmd_free(ctlr_info_t *h, CommandList_struct *c) -{ - int i; - - i = c - h->cmd_pool; - clear_bit(i, h->cmd_pool_bits); - h->nr_frees++; -} - -static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c) -{ - u64bit temp64; - - temp64.val32.lower = c->ErrDesc.Addr.lower; - temp64.val32.upper = c->ErrDesc.Addr.upper; - pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), - c->err_info, (dma_addr_t) temp64.val); - pci_free_consistent(h->pdev, sizeof(CommandList_struct), c, - (dma_addr_t) cciss_tag_discard_error_bits(h, (u32) c->busaddr)); -} - -static inline ctlr_info_t *get_host(struct gendisk *disk) -{ - return disk->queue->queuedata; -} - -static inline drive_info_struct *get_drv(struct gendisk *disk) -{ - return disk->private_data; -} - -/* - * Open. Make sure the device is really there. - */ -static int cciss_open(struct block_device *bdev, fmode_t mode) -{ - ctlr_info_t *h = get_host(bdev->bd_disk); - drive_info_struct *drv = get_drv(bdev->bd_disk); - - dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name); - if (drv->busy_configuring) - return -EBUSY; - /* - * Root is allowed to open raw volume zero even if it's not configured - * so array config can still work. Root is also allowed to open any - * volume that has a LUN ID, so it can issue IOCTL to reread the - * disk information. I don't think I really like this - * but I'm already using way to many device nodes to claim another one - * for "raw controller". - */ - if (drv->heads == 0) { - if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */ - /* if not node 0 make sure it is a partition = 0 */ - if (MINOR(bdev->bd_dev) & 0x0f) { - return -ENXIO; - /* if it is, make sure we have a LUN ID */ - } else if (memcmp(drv->LunID, CTLR_LUNID, - sizeof(drv->LunID))) { - return -ENXIO; - } - } - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - } - drv->usage_count++; - h->usage_count++; - return 0; -} - -static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode) -{ - int ret; - - mutex_lock(&cciss_mutex); - ret = cciss_open(bdev, mode); - mutex_unlock(&cciss_mutex); - - return ret; -} - -/* - * Close. Sync first. - */ -static void cciss_release(struct gendisk *disk, fmode_t mode) -{ - ctlr_info_t *h; - drive_info_struct *drv; - - mutex_lock(&cciss_mutex); - h = get_host(disk); - drv = get_drv(disk); - dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name); - drv->usage_count--; - h->usage_count--; - mutex_unlock(&cciss_mutex); -} - -#ifdef CONFIG_COMPAT - -static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg); -static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg); - -static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg) -{ - switch (cmd) { - case CCISS_GETPCIINFO: - case CCISS_GETINTINFO: - case CCISS_SETINTINFO: - case CCISS_GETNODENAME: - case CCISS_SETNODENAME: - case CCISS_GETHEARTBEAT: - case CCISS_GETBUSTYPES: - case CCISS_GETFIRMVER: - case CCISS_GETDRIVVER: - case CCISS_REVALIDVOLS: - case CCISS_DEREGDISK: - case CCISS_REGNEWDISK: - case CCISS_REGNEWD: - case CCISS_RESCANDISK: - case CCISS_GETLUNINFO: - return cciss_ioctl(bdev, mode, cmd, arg); - - case CCISS_PASSTHRU32: - return cciss_ioctl32_passthru(bdev, mode, cmd, arg); - case CCISS_BIG_PASSTHRU32: - return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg); - - default: - return -ENOIOCTLCMD; - } -} - -static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg) -{ - IOCTL32_Command_struct __user *arg32 = - (IOCTL32_Command_struct __user *) arg; - IOCTL_Command_struct arg64; - IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); - int err; - u32 cp; - - memset(&arg64, 0, sizeof(arg64)); - err = 0; - err |= - copy_from_user(&arg64.LUN_info, &arg32->LUN_info, - sizeof(arg64.LUN_info)); - err |= - copy_from_user(&arg64.Request, &arg32->Request, - sizeof(arg64.Request)); - err |= - copy_from_user(&arg64.error_info, &arg32->error_info, - sizeof(arg64.error_info)); - err |= get_user(arg64.buf_size, &arg32->buf_size); - err |= get_user(cp, &arg32->buf); - arg64.buf = compat_ptr(cp); - err |= copy_to_user(p, &arg64, sizeof(arg64)); - - if (err) - return -EFAULT; - - err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); - if (err) - return err; - err |= - copy_in_user(&arg32->error_info, &p->error_info, - sizeof(arg32->error_info)); - if (err) - return -EFAULT; - return err; -} - -static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg) -{ - BIG_IOCTL32_Command_struct __user *arg32 = - (BIG_IOCTL32_Command_struct __user *) arg; - BIG_IOCTL_Command_struct arg64; - BIG_IOCTL_Command_struct __user *p = - compat_alloc_user_space(sizeof(arg64)); - int err; - u32 cp; - - memset(&arg64, 0, sizeof(arg64)); - err = 0; - err |= - copy_from_user(&arg64.LUN_info, &arg32->LUN_info, - sizeof(arg64.LUN_info)); - err |= - copy_from_user(&arg64.Request, &arg32->Request, - sizeof(arg64.Request)); - err |= - copy_from_user(&arg64.error_info, &arg32->error_info, - sizeof(arg64.error_info)); - err |= get_user(arg64.buf_size, &arg32->buf_size); - err |= get_user(arg64.malloc_size, &arg32->malloc_size); - err |= get_user(cp, &arg32->buf); - arg64.buf = compat_ptr(cp); - err |= copy_to_user(p, &arg64, sizeof(arg64)); - - if (err) - return -EFAULT; - - err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); - if (err) - return err; - err |= - copy_in_user(&arg32->error_info, &p->error_info, - sizeof(arg32->error_info)); - if (err) - return -EFAULT; - return err; -} -#endif - -static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - drive_info_struct *drv = get_drv(bdev->bd_disk); - - if (!drv->cylinders) - return -ENXIO; - - geo->heads = drv->heads; - geo->sectors = drv->sectors; - geo->cylinders = drv->cylinders; - return 0; -} - -static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c) -{ - if (c->err_info->CommandStatus == CMD_TARGET_STATUS && - c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) - (void)check_for_unit_attention(h, c); -} - -static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp) -{ - cciss_pci_info_struct pciinfo; - - if (!argp) - return -EINVAL; - pciinfo.domain = pci_domain_nr(h->pdev->bus); - pciinfo.bus = h->pdev->bus->number; - pciinfo.dev_fn = h->pdev->devfn; - pciinfo.board_id = h->board_id; - if (copy_to_user(argp, &pciinfo, sizeof(cciss_pci_info_struct))) - return -EFAULT; - return 0; -} - -static int cciss_getintinfo(ctlr_info_t *h, void __user *argp) -{ - cciss_coalint_struct intinfo; - unsigned long flags; - - if (!argp) - return -EINVAL; - spin_lock_irqsave(&h->lock, flags); - intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay); - intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount); - spin_unlock_irqrestore(&h->lock, flags); - if (copy_to_user - (argp, &intinfo, sizeof(cciss_coalint_struct))) - return -EFAULT; - return 0; -} - -static int cciss_setintinfo(ctlr_info_t *h, void __user *argp) -{ - cciss_coalint_struct intinfo; - unsigned long flags; - int i; - - if (!argp) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (copy_from_user(&intinfo, argp, sizeof(intinfo))) - return -EFAULT; - if ((intinfo.delay == 0) && (intinfo.count == 0)) - return -EINVAL; - spin_lock_irqsave(&h->lock, flags); - /* Update the field, and then ring the doorbell */ - writel(intinfo.delay, &(h->cfgtable->HostWrite.CoalIntDelay)); - writel(intinfo.count, &(h->cfgtable->HostWrite.CoalIntCount)); - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - - for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { - if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - udelay(1000); /* delay and try again */ - } - spin_unlock_irqrestore(&h->lock, flags); - if (i >= MAX_IOCTL_CONFIG_WAIT) - return -EAGAIN; - return 0; -} - -static int cciss_getnodename(ctlr_info_t *h, void __user *argp) -{ - NodeName_type NodeName; - unsigned long flags; - int i; - - if (!argp) - return -EINVAL; - spin_lock_irqsave(&h->lock, flags); - for (i = 0; i < 16; i++) - NodeName[i] = readb(&h->cfgtable->ServerName[i]); - spin_unlock_irqrestore(&h->lock, flags); - if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) - return -EFAULT; - return 0; -} - -static int cciss_setnodename(ctlr_info_t *h, void __user *argp) -{ - NodeName_type NodeName; - unsigned long flags; - int i; - - if (!argp) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (copy_from_user(NodeName, argp, sizeof(NodeName_type))) - return -EFAULT; - spin_lock_irqsave(&h->lock, flags); - /* Update the field, and then ring the doorbell */ - for (i = 0; i < 16; i++) - writeb(NodeName[i], &h->cfgtable->ServerName[i]); - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { - if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - udelay(1000); /* delay and try again */ - } - spin_unlock_irqrestore(&h->lock, flags); - if (i >= MAX_IOCTL_CONFIG_WAIT) - return -EAGAIN; - return 0; -} - -static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) -{ - Heartbeat_type heartbeat; - unsigned long flags; - - if (!argp) - return -EINVAL; - spin_lock_irqsave(&h->lock, flags); - heartbeat = readl(&h->cfgtable->HeartBeat); - spin_unlock_irqrestore(&h->lock, flags); - if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type))) - return -EFAULT; - return 0; -} - -static int cciss_getbustypes(ctlr_info_t *h, void __user *argp) -{ - BusTypes_type BusTypes; - unsigned long flags; - - if (!argp) - return -EINVAL; - spin_lock_irqsave(&h->lock, flags); - BusTypes = readl(&h->cfgtable->BusTypes); - spin_unlock_irqrestore(&h->lock, flags); - if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type))) - return -EFAULT; - return 0; -} - -static int cciss_getfirmver(ctlr_info_t *h, void __user *argp) -{ - FirmwareVer_type firmware; - - if (!argp) - return -EINVAL; - memcpy(firmware, h->firm_ver, 4); - - if (copy_to_user - (argp, firmware, sizeof(FirmwareVer_type))) - return -EFAULT; - return 0; -} - -static int cciss_getdrivver(ctlr_info_t *h, void __user *argp) -{ - DriverVer_type DriverVer = DRIVER_VERSION; - - if (!argp) - return -EINVAL; - if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) - return -EFAULT; - return 0; -} - -static int cciss_getluninfo(ctlr_info_t *h, - struct gendisk *disk, void __user *argp) -{ - LogvolInfo_struct luninfo; - drive_info_struct *drv = get_drv(disk); - - if (!argp) - return -EINVAL; - memcpy(&luninfo.LunID, drv->LunID, sizeof(luninfo.LunID)); - luninfo.num_opens = drv->usage_count; - luninfo.num_parts = 0; - if (copy_to_user(argp, &luninfo, sizeof(LogvolInfo_struct))) - return -EFAULT; - return 0; -} - -static int cciss_passthru(ctlr_info_t *h, void __user *argp) -{ - IOCTL_Command_struct iocommand; - CommandList_struct *c; - char *buff = NULL; - u64bit temp64; - DECLARE_COMPLETION_ONSTACK(wait); - - if (!argp) - return -EINVAL; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - if (copy_from_user - (&iocommand, argp, sizeof(IOCTL_Command_struct))) - return -EFAULT; - if ((iocommand.buf_size < 1) && - (iocommand.Request.Type.Direction != XFER_NONE)) { - return -EINVAL; - } - if (iocommand.buf_size > 0) { - buff = kmalloc(iocommand.buf_size, GFP_KERNEL); - if (buff == NULL) - return -EFAULT; - } - if (iocommand.Request.Type.Direction == XFER_WRITE) { - /* Copy the data into the buffer we created */ - if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { - kfree(buff); - return -EFAULT; - } - } else { - memset(buff, 0, iocommand.buf_size); - } - c = cmd_special_alloc(h); - if (!c) { - kfree(buff); - return -ENOMEM; - } - /* Fill in the command type */ - c->cmd_type = CMD_IOCTL_PEND; - /* Fill in Command Header */ - c->Header.ReplyQueue = 0; /* unused in simple mode */ - if (iocommand.buf_size > 0) { /* buffer to fill */ - c->Header.SGList = 1; - c->Header.SGTotal = 1; - } else { /* no buffers to fill */ - c->Header.SGList = 0; - c->Header.SGTotal = 0; - } - c->Header.LUN = iocommand.LUN_info; - /* use the kernel address the cmd block for tag */ - c->Header.Tag.lower = c->busaddr; - - /* Fill in Request block */ - c->Request = iocommand.Request; - - /* Fill in the scatter gather information */ - if (iocommand.buf_size > 0) { - temp64.val = pci_map_single(h->pdev, buff, - iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); - c->SG[0].Addr.lower = temp64.val32.lower; - c->SG[0].Addr.upper = temp64.val32.upper; - c->SG[0].Len = iocommand.buf_size; - c->SG[0].Ext = 0; /* we are not chaining */ - } - c->waiting = &wait; - - enqueue_cmd_and_start_io(h, c); - wait_for_completion(&wait); - - /* unlock the buffers from DMA */ - temp64.val32.lower = c->SG[0].Addr.lower; - temp64.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(h->pdev, (dma_addr_t) temp64.val, iocommand.buf_size, - PCI_DMA_BIDIRECTIONAL); - check_ioctl_unit_attention(h, c); - - /* Copy the error information out */ - iocommand.error_info = *(c->err_info); - if (copy_to_user(argp, &iocommand, sizeof(IOCTL_Command_struct))) { - kfree(buff); - cmd_special_free(h, c); - return -EFAULT; - } - - if (iocommand.Request.Type.Direction == XFER_READ) { - /* Copy the data out of the buffer we created */ - if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { - kfree(buff); - cmd_special_free(h, c); - return -EFAULT; - } - } - kfree(buff); - cmd_special_free(h, c); - return 0; -} - -static int cciss_bigpassthru(ctlr_info_t *h, void __user *argp) -{ - BIG_IOCTL_Command_struct *ioc; - CommandList_struct *c; - unsigned char **buff = NULL; - int *buff_size = NULL; - u64bit temp64; - BYTE sg_used = 0; - int status = 0; - int i; - DECLARE_COMPLETION_ONSTACK(wait); - __u32 left; - __u32 sz; - BYTE __user *data_ptr; - - if (!argp) - return -EINVAL; - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - ioc = kmalloc(sizeof(*ioc), GFP_KERNEL); - if (!ioc) { - status = -ENOMEM; - goto cleanup1; - } - if (copy_from_user(ioc, argp, sizeof(*ioc))) { - status = -EFAULT; - goto cleanup1; - } - if ((ioc->buf_size < 1) && - (ioc->Request.Type.Direction != XFER_NONE)) { - status = -EINVAL; - goto cleanup1; - } - /* Check kmalloc limits using all SGs */ - if (ioc->malloc_size > MAX_KMALLOC_SIZE) { - status = -EINVAL; - goto cleanup1; - } - if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { - status = -EINVAL; - goto cleanup1; - } - buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); - if (!buff) { - status = -ENOMEM; - goto cleanup1; - } - buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); - if (!buff_size) { - status = -ENOMEM; - goto cleanup1; - } - left = ioc->buf_size; - data_ptr = ioc->buf; - while (left) { - sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; - buff_size[sg_used] = sz; - buff[sg_used] = kmalloc(sz, GFP_KERNEL); - if (buff[sg_used] == NULL) { - status = -ENOMEM; - goto cleanup1; - } - if (ioc->Request.Type.Direction == XFER_WRITE) { - if (copy_from_user(buff[sg_used], data_ptr, sz)) { - status = -EFAULT; - goto cleanup1; - } - } else { - memset(buff[sg_used], 0, sz); - } - left -= sz; - data_ptr += sz; - sg_used++; - } - c = cmd_special_alloc(h); - if (!c) { - status = -ENOMEM; - goto cleanup1; - } - c->cmd_type = CMD_IOCTL_PEND; - c->Header.ReplyQueue = 0; - c->Header.SGList = sg_used; - c->Header.SGTotal = sg_used; - c->Header.LUN = ioc->LUN_info; - c->Header.Tag.lower = c->busaddr; - - c->Request = ioc->Request; - for (i = 0; i < sg_used; i++) { - temp64.val = pci_map_single(h->pdev, buff[i], buff_size[i], - PCI_DMA_BIDIRECTIONAL); - c->SG[i].Addr.lower = temp64.val32.lower; - c->SG[i].Addr.upper = temp64.val32.upper; - c->SG[i].Len = buff_size[i]; - c->SG[i].Ext = 0; /* we are not chaining */ - } - c->waiting = &wait; - enqueue_cmd_and_start_io(h, c); - wait_for_completion(&wait); - /* unlock the buffers from DMA */ - for (i = 0; i < sg_used; i++) { - temp64.val32.lower = c->SG[i].Addr.lower; - temp64.val32.upper = c->SG[i].Addr.upper; - pci_unmap_single(h->pdev, - (dma_addr_t) temp64.val, buff_size[i], - PCI_DMA_BIDIRECTIONAL); - } - check_ioctl_unit_attention(h, c); - /* Copy the error information out */ - ioc->error_info = *(c->err_info); - if (copy_to_user(argp, ioc, sizeof(*ioc))) { - cmd_special_free(h, c); - status = -EFAULT; - goto cleanup1; - } - if (ioc->Request.Type.Direction == XFER_READ) { - /* Copy the data out of the buffer we created */ - BYTE __user *ptr = ioc->buf; - for (i = 0; i < sg_used; i++) { - if (copy_to_user(ptr, buff[i], buff_size[i])) { - cmd_special_free(h, c); - status = -EFAULT; - goto cleanup1; - } - ptr += buff_size[i]; - } - } - cmd_special_free(h, c); - status = 0; -cleanup1: - if (buff) { - for (i = 0; i < sg_used; i++) - kfree(buff[i]); - kfree(buff); - } - kfree(buff_size); - kfree(ioc); - return status; -} - -static int cciss_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg) -{ - struct gendisk *disk = bdev->bd_disk; - ctlr_info_t *h = get_host(disk); - void __user *argp = (void __user *)arg; - - dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n", - cmd, arg); - switch (cmd) { - case CCISS_GETPCIINFO: - return cciss_getpciinfo(h, argp); - case CCISS_GETINTINFO: - return cciss_getintinfo(h, argp); - case CCISS_SETINTINFO: - return cciss_setintinfo(h, argp); - case CCISS_GETNODENAME: - return cciss_getnodename(h, argp); - case CCISS_SETNODENAME: - return cciss_setnodename(h, argp); - case CCISS_GETHEARTBEAT: - return cciss_getheartbeat(h, argp); - case CCISS_GETBUSTYPES: - return cciss_getbustypes(h, argp); - case CCISS_GETFIRMVER: - return cciss_getfirmver(h, argp); - case CCISS_GETDRIVVER: - return cciss_getdrivver(h, argp); - case CCISS_DEREGDISK: - case CCISS_REGNEWD: - case CCISS_REVALIDVOLS: - return rebuild_lun_table(h, 0, 1); - case CCISS_GETLUNINFO: - return cciss_getluninfo(h, disk, argp); - case CCISS_PASSTHRU: - return cciss_passthru(h, argp); - case CCISS_BIG_PASSTHRU: - return cciss_bigpassthru(h, argp); - - /* scsi_cmd_blk_ioctl handles these, below, though some are not */ - /* very meaningful for cciss. SG_IO is the main one people want. */ - - case SG_GET_VERSION_NUM: - case SG_SET_TIMEOUT: - case SG_GET_TIMEOUT: - case SG_GET_RESERVED_SIZE: - case SG_SET_RESERVED_SIZE: - case SG_EMULATED_HOST: - case SG_IO: - case SCSI_IOCTL_SEND_COMMAND: - return scsi_cmd_blk_ioctl(bdev, mode, cmd, argp); - - /* scsi_cmd_blk_ioctl would normally handle these, below, but */ - /* they aren't a good fit for cciss, as CD-ROMs are */ - /* not supported, and we don't have any bus/target/lun */ - /* which we present to the kernel. */ - - case CDROM_SEND_PACKET: - case CDROMCLOSETRAY: - case CDROMEJECT: - case SCSI_IOCTL_GET_IDLUN: - case SCSI_IOCTL_GET_BUS_NUMBER: - default: - return -ENOTTY; - } -} - -static void cciss_check_queues(ctlr_info_t *h) -{ - int start_queue = h->next_to_run; - int i; - - /* check to see if we have maxed out the number of commands that can - * be placed on the queue. If so then exit. We do this check here - * in case the interrupt we serviced was from an ioctl and did not - * free any new commands. - */ - if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) - return; - - /* We have room on the queue for more commands. Now we need to queue - * them up. We will also keep track of the next queue to run so - * that every queue gets a chance to be started first. - */ - for (i = 0; i < h->highest_lun + 1; i++) { - int curr_queue = (start_queue + i) % (h->highest_lun + 1); - /* make sure the disk has been added and the drive is real - * because this can be called from the middle of init_one. - */ - if (!h->drv[curr_queue]) - continue; - if (!(h->drv[curr_queue]->queue) || - !(h->drv[curr_queue]->heads)) - continue; - blk_start_queue(h->gendisk[curr_queue]->queue); - - /* check to see if we have maxed out the number of commands - * that can be placed on the queue. - */ - if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) { - if (curr_queue == start_queue) { - h->next_to_run = - (start_queue + 1) % (h->highest_lun + 1); - break; - } else { - h->next_to_run = curr_queue; - break; - } - } - } -} - -static void cciss_softirq_done(struct request *rq) -{ - CommandList_struct *c = rq->completion_data; - ctlr_info_t *h = hba[c->ctlr]; - SGDescriptor_struct *curr_sg = c->SG; - u64bit temp64; - unsigned long flags; - int i, ddir; - int sg_index = 0; - - if (c->Request.Type.Direction == XFER_READ) - ddir = PCI_DMA_FROMDEVICE; - else - ddir = PCI_DMA_TODEVICE; - - /* command did not need to be retried */ - /* unmap the DMA mapping for all the scatter gather elements */ - for (i = 0; i < c->Header.SGList; i++) { - if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) { - cciss_unmap_sg_chain_block(h, c); - /* Point to the next block */ - curr_sg = h->cmd_sg_list[c->cmdindex]; - sg_index = 0; - } - temp64.val32.lower = curr_sg[sg_index].Addr.lower; - temp64.val32.upper = curr_sg[sg_index].Addr.upper; - pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len, - ddir); - ++sg_index; - } - - dev_dbg(&h->pdev->dev, "Done with %p\n", rq); - - /* set the residual count for pc requests */ - if (blk_rq_is_passthrough(rq)) - scsi_req(rq)->resid_len = c->err_info->ResidualCnt; - blk_end_request_all(rq, scsi_req(rq)->result ? - BLK_STS_IOERR : BLK_STS_OK); - - spin_lock_irqsave(&h->lock, flags); - cmd_free(h, c); - cciss_check_queues(h); - spin_unlock_irqrestore(&h->lock, flags); -} - -static inline void log_unit_to_scsi3addr(ctlr_info_t *h, - unsigned char scsi3addr[], uint32_t log_unit) -{ - memcpy(scsi3addr, h->drv[log_unit]->LunID, - sizeof(h->drv[log_unit]->LunID)); -} - -/* This function gets the SCSI vendor, model, and revision of a logical drive - * via the inquiry page 0. Model, vendor, and rev are set to empty strings if - * they cannot be read. - */ -static void cciss_get_device_descr(ctlr_info_t *h, int logvol, - char *vendor, char *model, char *rev) -{ - int rc; - InquiryData_struct *inq_buf; - unsigned char scsi3addr[8]; - - *vendor = '\0'; - *model = '\0'; - *rev = '\0'; - - inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (!inq_buf) - return; - - log_unit_to_scsi3addr(h, scsi3addr, logvol); - rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0, - scsi3addr, TYPE_CMD); - if (rc == IO_OK) { - memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN); - vendor[VENDOR_LEN] = '\0'; - memcpy(model, &inq_buf->data_byte[16], MODEL_LEN); - model[MODEL_LEN] = '\0'; - memcpy(rev, &inq_buf->data_byte[32], REV_LEN); - rev[REV_LEN] = '\0'; - } - - kfree(inq_buf); - return; -} - -/* This function gets the serial number of a logical drive via - * inquiry page 0x83. Serial no. is 16 bytes. If the serial - * number cannot be had, for whatever reason, 16 bytes of 0xff - * are returned instead. - */ -static void cciss_get_serial_no(ctlr_info_t *h, int logvol, - unsigned char *serial_no, int buflen) -{ -#define PAGE_83_INQ_BYTES 64 - int rc; - unsigned char *buf; - unsigned char scsi3addr[8]; - - if (buflen > 16) - buflen = 16; - memset(serial_no, 0xff, buflen); - buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL); - if (!buf) - return; - memset(serial_no, 0, buflen); - log_unit_to_scsi3addr(h, scsi3addr, logvol); - rc = sendcmd_withirq(h, CISS_INQUIRY, buf, - PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); - if (rc == IO_OK) - memcpy(serial_no, &buf[8], buflen); - kfree(buf); - return; -} - -static void cciss_initialize_rq(struct request *rq) -{ - struct scsi_request *sreq = blk_mq_rq_to_pdu(rq); - - scsi_req_init(sreq); -} - -/* - * cciss_add_disk sets up the block device queue for a logical drive - */ -static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, - int drv_index) -{ - disk->queue = blk_alloc_queue(GFP_KERNEL); - if (!disk->queue) - goto init_queue_failure; - - disk->queue->cmd_size = sizeof(struct scsi_request); - disk->queue->request_fn = do_cciss_request; - disk->queue->initialize_rq_fn = cciss_initialize_rq; - disk->queue->queue_lock = &h->lock; - queue_flag_set_unlocked(QUEUE_FLAG_SCSI_PASSTHROUGH, disk->queue); - if (blk_init_allocated_queue(disk->queue) < 0) - goto cleanup_queue; - - sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); - disk->major = h->major; - disk->first_minor = drv_index << NWD_SHIFT; - disk->fops = &cciss_fops; - if (cciss_create_ld_sysfs_entry(h, drv_index)) - goto cleanup_queue; - disk->private_data = h->drv[drv_index]; - - /* Set up queue information */ - blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_segments(disk->queue, h->maxsgentries); - - blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors); - - blk_queue_softirq_done(disk->queue, cciss_softirq_done); - - disk->queue->queuedata = h; - - blk_queue_logical_block_size(disk->queue, - h->drv[drv_index]->block_size); - - /* Make sure all queue data is written out before */ - /* setting h->drv[drv_index]->queue, as setting this */ - /* allows the interrupt handler to start the queue */ - wmb(); - h->drv[drv_index]->queue = disk->queue; - device_add_disk(&h->drv[drv_index]->dev, disk); - return 0; - -cleanup_queue: - blk_cleanup_queue(disk->queue); - disk->queue = NULL; -init_queue_failure: - return -1; -} - -/* This function will check the usage_count of the drive to be updated/added. - * If the usage_count is zero and it is a heretofore unknown drive, or, - * the drive's capacity, geometry, or serial number has changed, - * then the drive information will be updated and the disk will be - * re-registered with the kernel. If these conditions don't hold, - * then it will be left alone for the next reboot. The exception to this - * is disk 0 which will always be left registered with the kernel since it - * is also the controller node. Any changes to disk 0 will show up on - * the next reboot. - */ -static void cciss_update_drive_info(ctlr_info_t *h, int drv_index, - int first_time, int via_ioctl) -{ - struct gendisk *disk; - InquiryData_struct *inq_buff = NULL; - unsigned int block_size; - sector_t total_size; - unsigned long flags = 0; - int ret = 0; - drive_info_struct *drvinfo; - - /* Get information about the disk and modify the driver structure */ - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL); - if (inq_buff == NULL || drvinfo == NULL) - goto mem_msg; - - /* testing to see if 16-byte CDBs are already being used */ - if (h->cciss_read == CCISS_READ_16) { - cciss_read_capacity_16(h, drv_index, - &total_size, &block_size); - - } else { - cciss_read_capacity(h, drv_index, &total_size, &block_size); - /* if read_capacity returns all F's this volume is >2TB */ - /* in size so we switch to 16-byte CDB's for all */ - /* read/write ops */ - if (total_size == 0xFFFFFFFFULL) { - cciss_read_capacity_16(h, drv_index, - &total_size, &block_size); - h->cciss_read = CCISS_READ_16; - h->cciss_write = CCISS_WRITE_16; - } else { - h->cciss_read = CCISS_READ_10; - h->cciss_write = CCISS_WRITE_10; - } - } - - cciss_geometry_inquiry(h, drv_index, total_size, block_size, - inq_buff, drvinfo); - drvinfo->block_size = block_size; - drvinfo->nr_blocks = total_size + 1; - - cciss_get_device_descr(h, drv_index, drvinfo->vendor, - drvinfo->model, drvinfo->rev); - cciss_get_serial_no(h, drv_index, drvinfo->serial_no, - sizeof(drvinfo->serial_no)); - /* Save the lunid in case we deregister the disk, below. */ - memcpy(drvinfo->LunID, h->drv[drv_index]->LunID, - sizeof(drvinfo->LunID)); - - /* Is it the same disk we already know, and nothing's changed? */ - if (h->drv[drv_index]->raid_level != -1 && - ((memcmp(drvinfo->serial_no, - h->drv[drv_index]->serial_no, 16) == 0) && - drvinfo->block_size == h->drv[drv_index]->block_size && - drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks && - drvinfo->heads == h->drv[drv_index]->heads && - drvinfo->sectors == h->drv[drv_index]->sectors && - drvinfo->cylinders == h->drv[drv_index]->cylinders)) - /* The disk is unchanged, nothing to update */ - goto freeret; - - /* If we get here it's not the same disk, or something's changed, - * so we need to * deregister it, and re-register it, if it's not - * in use. - * If the disk already exists then deregister it before proceeding - * (unless it's the first disk (for the controller node). - */ - if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) { - dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index); - spin_lock_irqsave(&h->lock, flags); - h->drv[drv_index]->busy_configuring = 1; - spin_unlock_irqrestore(&h->lock, flags); - - /* deregister_disk sets h->drv[drv_index]->queue = NULL - * which keeps the interrupt handler from starting - * the queue. - */ - ret = deregister_disk(h, drv_index, 0, via_ioctl); - } - - /* If the disk is in use return */ - if (ret) - goto freeret; - - /* Save the new information from cciss_geometry_inquiry - * and serial number inquiry. If the disk was deregistered - * above, then h->drv[drv_index] will be NULL. - */ - if (h->drv[drv_index] == NULL) { - drvinfo->device_initialized = 0; - h->drv[drv_index] = drvinfo; - drvinfo = NULL; /* so it won't be freed below. */ - } else { - /* special case for cxd0 */ - h->drv[drv_index]->block_size = drvinfo->block_size; - h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks; - h->drv[drv_index]->heads = drvinfo->heads; - h->drv[drv_index]->sectors = drvinfo->sectors; - h->drv[drv_index]->cylinders = drvinfo->cylinders; - h->drv[drv_index]->raid_level = drvinfo->raid_level; - memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16); - memcpy(h->drv[drv_index]->vendor, drvinfo->vendor, - VENDOR_LEN + 1); - memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1); - memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1); - } - - ++h->num_luns; - disk = h->gendisk[drv_index]; - set_capacity(disk, h->drv[drv_index]->nr_blocks); - - /* If it's not disk 0 (drv_index != 0) - * or if it was disk 0, but there was previously - * no actual corresponding configured logical drive - * (raid_leve == -1) then we want to update the - * logical drive's information. - */ - if (drv_index || first_time) { - if (cciss_add_disk(h, disk, drv_index) != 0) { - cciss_free_gendisk(h, drv_index); - cciss_free_drive_info(h, drv_index); - dev_warn(&h->pdev->dev, "could not update disk %d\n", - drv_index); - --h->num_luns; - } - } - -freeret: - kfree(inq_buff); - kfree(drvinfo); - return; -mem_msg: - dev_err(&h->pdev->dev, "out of memory\n"); - goto freeret; -} - -/* This function will find the first index of the controllers drive array - * that has a null drv pointer and allocate the drive info struct and - * will return that index This is where new drives will be added. - * If the index to be returned is greater than the highest_lun index for - * the controller then highest_lun is set * to this new index. - * If there are no available indexes or if tha allocation fails, then -1 - * is returned. * "controller_node" is used to know if this is a real - * logical drive, or just the controller node, which determines if this - * counts towards highest_lun. - */ -static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node) -{ - int i; - drive_info_struct *drv; - - /* Search for an empty slot for our drive info */ - for (i = 0; i < CISS_MAX_LUN; i++) { - - /* if not cxd0 case, and it's occupied, skip it. */ - if (h->drv[i] && i != 0) - continue; - /* - * If it's cxd0 case, and drv is alloc'ed already, and a - * disk is configured there, skip it. - */ - if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1) - continue; - - /* - * We've found an empty slot. Update highest_lun - * provided this isn't just the fake cxd0 controller node. - */ - if (i > h->highest_lun && !controller_node) - h->highest_lun = i; - - /* If adding a real disk at cxd0, and it's already alloc'ed */ - if (i == 0 && h->drv[i] != NULL) - return i; - - /* - * Found an empty slot, not already alloc'ed. Allocate it. - * Mark it with raid_level == -1, so we know it's new later on. - */ - drv = kzalloc(sizeof(*drv), GFP_KERNEL); - if (!drv) - return -1; - drv->raid_level = -1; /* so we know it's new */ - h->drv[i] = drv; - return i; - } - return -1; -} - -static void cciss_free_drive_info(ctlr_info_t *h, int drv_index) -{ - kfree(h->drv[drv_index]); - h->drv[drv_index] = NULL; -} - -static void cciss_free_gendisk(ctlr_info_t *h, int drv_index) -{ - put_disk(h->gendisk[drv_index]); - h->gendisk[drv_index] = NULL; -} - -/* cciss_add_gendisk finds a free hba[]->drv structure - * and allocates a gendisk if needed, and sets the lunid - * in the drvinfo structure. It returns the index into - * the ->drv[] array, or -1 if none are free. - * is_controller_node indicates whether highest_lun should - * count this disk, or if it's only being added to provide - * a means to talk to the controller in case no logical - * drives have yet been configured. - */ -static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[], - int controller_node) -{ - int drv_index; - - drv_index = cciss_alloc_drive_info(h, controller_node); - if (drv_index == -1) - return -1; - - /*Check if the gendisk needs to be allocated */ - if (!h->gendisk[drv_index]) { - h->gendisk[drv_index] = - alloc_disk(1 << NWD_SHIFT); - if (!h->gendisk[drv_index]) { - dev_err(&h->pdev->dev, - "could not allocate a new disk %d\n", - drv_index); - goto err_free_drive_info; - } - } - memcpy(h->drv[drv_index]->LunID, lunid, - sizeof(h->drv[drv_index]->LunID)); - if (cciss_create_ld_sysfs_entry(h, drv_index)) - goto err_free_disk; - /* Don't need to mark this busy because nobody */ - /* else knows about this disk yet to contend */ - /* for access to it. */ - h->drv[drv_index]->busy_configuring = 0; - wmb(); - return drv_index; - -err_free_disk: - cciss_free_gendisk(h, drv_index); -err_free_drive_info: - cciss_free_drive_info(h, drv_index); - return -1; -} - -/* This is for the special case of a controller which - * has no logical drives. In this case, we still need - * to register a disk so the controller can be accessed - * by the Array Config Utility. - */ -static void cciss_add_controller_node(ctlr_info_t *h) -{ - struct gendisk *disk; - int drv_index; - - if (h->gendisk[0] != NULL) /* already did this? Then bail. */ - return; - - drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1); - if (drv_index == -1) - goto error; - h->drv[drv_index]->block_size = 512; - h->drv[drv_index]->nr_blocks = 0; - h->drv[drv_index]->heads = 0; - h->drv[drv_index]->sectors = 0; - h->drv[drv_index]->cylinders = 0; - h->drv[drv_index]->raid_level = -1; - memset(h->drv[drv_index]->serial_no, 0, 16); - disk = h->gendisk[drv_index]; - if (cciss_add_disk(h, disk, drv_index) == 0) - return; - cciss_free_gendisk(h, drv_index); - cciss_free_drive_info(h, drv_index); -error: - dev_warn(&h->pdev->dev, "could not add disk 0.\n"); - return; -} - -/* This function will add and remove logical drives from the Logical - * drive array of the controller and maintain persistency of ordering - * so that mount points are preserved until the next reboot. This allows - * for the removal of logical drives in the middle of the drive array - * without a re-ordering of those drives. - * INPUT - * h = The controller to perform the operations on - */ -static int rebuild_lun_table(ctlr_info_t *h, int first_time, - int via_ioctl) -{ - int num_luns; - ReportLunData_struct *ld_buff = NULL; - int return_code; - int listlength = 0; - int i; - int drv_found; - int drv_index = 0; - unsigned char lunid[8] = CTLR_LUNID; - unsigned long flags; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* Set busy_configuring flag for this operation */ - spin_lock_irqsave(&h->lock, flags); - if (h->busy_configuring) { - spin_unlock_irqrestore(&h->lock, flags); - return -EBUSY; - } - h->busy_configuring = 1; - spin_unlock_irqrestore(&h->lock, flags); - - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) - goto mem_msg; - - return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff, - sizeof(ReportLunData_struct), - 0, CTLR_LUNID, TYPE_CMD); - - if (return_code == IO_OK) - listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); - else { /* reading number of logical volumes failed */ - dev_warn(&h->pdev->dev, - "report logical volume command failed\n"); - listlength = 0; - goto freeret; - } - - num_luns = listlength / 8; /* 8 bytes per entry */ - if (num_luns > CISS_MAX_LUN) { - num_luns = CISS_MAX_LUN; - dev_warn(&h->pdev->dev, "more luns configured" - " on controller than can be handled by" - " this driver.\n"); - } - - if (num_luns == 0) - cciss_add_controller_node(h); - - /* Compare controller drive array to driver's drive array - * to see if any drives are missing on the controller due - * to action of Array Config Utility (user deletes drive) - * and deregister logical drives which have disappeared. - */ - for (i = 0; i <= h->highest_lun; i++) { - int j; - drv_found = 0; - - /* skip holes in the array from already deleted drives */ - if (h->drv[i] == NULL) - continue; - - for (j = 0; j < num_luns; j++) { - memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid)); - if (memcmp(h->drv[i]->LunID, lunid, - sizeof(lunid)) == 0) { - drv_found = 1; - break; - } - } - if (!drv_found) { - /* Deregister it from the OS, it's gone. */ - spin_lock_irqsave(&h->lock, flags); - h->drv[i]->busy_configuring = 1; - spin_unlock_irqrestore(&h->lock, flags); - return_code = deregister_disk(h, i, 1, via_ioctl); - if (h->drv[i] != NULL) - h->drv[i]->busy_configuring = 0; - } - } - - /* Compare controller drive array to driver's drive array. - * Check for updates in the drive information and any new drives - * on the controller due to ACU adding logical drives, or changing - * a logical drive's size, etc. Reregister any new/changed drives - */ - for (i = 0; i < num_luns; i++) { - int j; - - drv_found = 0; - - memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid)); - /* Find if the LUN is already in the drive array - * of the driver. If so then update its info - * if not in use. If it does not exist then find - * the first free index and add it. - */ - for (j = 0; j <= h->highest_lun; j++) { - if (h->drv[j] != NULL && - memcmp(h->drv[j]->LunID, lunid, - sizeof(h->drv[j]->LunID)) == 0) { - drv_index = j; - drv_found = 1; - break; - } - } - - /* check if the drive was found already in the array */ - if (!drv_found) { - drv_index = cciss_add_gendisk(h, lunid, 0); - if (drv_index == -1) - goto freeret; - } - cciss_update_drive_info(h, drv_index, first_time, via_ioctl); - } /* end for */ - -freeret: - kfree(ld_buff); - h->busy_configuring = 0; - /* We return -1 here to tell the ACU that we have registered/updated - * all of the drives that we can and to keep it from calling us - * additional times. - */ - return -1; -mem_msg: - dev_err(&h->pdev->dev, "out of memory\n"); - h->busy_configuring = 0; - goto freeret; -} - -static void cciss_clear_drive_info(drive_info_struct *drive_info) -{ - /* zero out the disk size info */ - drive_info->nr_blocks = 0; - drive_info->block_size = 0; - drive_info->heads = 0; - drive_info->sectors = 0; - drive_info->cylinders = 0; - drive_info->raid_level = -1; - memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no)); - memset(drive_info->model, 0, sizeof(drive_info->model)); - memset(drive_info->rev, 0, sizeof(drive_info->rev)); - memset(drive_info->vendor, 0, sizeof(drive_info->vendor)); - /* - * don't clear the LUNID though, we need to remember which - * one this one is. - */ -} - -/* This function will deregister the disk and it's queue from the - * kernel. It must be called with the controller lock held and the - * drv structures busy_configuring flag set. It's parameters are: - * - * disk = This is the disk to be deregistered - * drv = This is the drive_info_struct associated with the disk to be - * deregistered. It contains information about the disk used - * by the driver. - * clear_all = This flag determines whether or not the disk information - * is going to be completely cleared out and the highest_lun - * reset. Sometimes we want to clear out information about - * the disk in preparation for re-adding it. In this case - * the highest_lun should be left unchanged and the LunID - * should not be cleared. - * via_ioctl - * This indicates whether we've reached this path via ioctl. - * This affects the maximum usage count allowed for c0d0 to be messed with. - * If this path is reached via ioctl(), then the max_usage_count will - * be 1, as the process calling ioctl() has got to have the device open. - * If we get here via sysfs, then the max usage count will be zero. -*/ -static int deregister_disk(ctlr_info_t *h, int drv_index, - int clear_all, int via_ioctl) -{ - int i; - struct gendisk *disk; - drive_info_struct *drv; - int recalculate_highest_lun; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - drv = h->drv[drv_index]; - disk = h->gendisk[drv_index]; - - /* make sure logical volume is NOT is use */ - if (clear_all || (h->gendisk[0] == disk)) { - if (drv->usage_count > via_ioctl) - return -EBUSY; - } else if (drv->usage_count > 0) - return -EBUSY; - - recalculate_highest_lun = (drv == h->drv[h->highest_lun]); - - /* invalidate the devices and deregister the disk. If it is disk - * zero do not deregister it but just zero out it's values. This - * allows us to delete disk zero but keep the controller registered. - */ - if (h->gendisk[0] != disk) { - struct request_queue *q = disk->queue; - if (disk->flags & GENHD_FL_UP) { - cciss_destroy_ld_sysfs_entry(h, drv_index, 0); - del_gendisk(disk); - } - if (q) - blk_cleanup_queue(q); - /* If clear_all is set then we are deleting the logical - * drive, not just refreshing its info. For drives - * other than disk 0 we will call put_disk. We do not - * do this for disk 0 as we need it to be able to - * configure the controller. - */ - if (clear_all){ - /* This isn't pretty, but we need to find the - * disk in our array and NULL our the pointer. - * This is so that we will call alloc_disk if - * this index is used again later. - */ - for (i=0; i < CISS_MAX_LUN; i++){ - if (h->gendisk[i] == disk) { - h->gendisk[i] = NULL; - break; - } - } - put_disk(disk); - } - } else { - set_capacity(disk, 0); - cciss_clear_drive_info(drv); - } - - --h->num_luns; - - /* if it was the last disk, find the new hightest lun */ - if (clear_all && recalculate_highest_lun) { - int newhighest = -1; - for (i = 0; i <= h->highest_lun; i++) { - /* if the disk has size > 0, it is available */ - if (h->drv[i] && h->drv[i]->heads) - newhighest = i; - } - h->highest_lun = newhighest; - } - return 0; -} - -static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, - size_t size, __u8 page_code, unsigned char *scsi3addr, - int cmd_type) -{ - u64bit buff_dma_handle; - int status = IO_OK; - - c->cmd_type = CMD_IOCTL_PEND; - c->Header.ReplyQueue = 0; - if (buff != NULL) { - c->Header.SGList = 1; - c->Header.SGTotal = 1; - } else { - c->Header.SGList = 0; - c->Header.SGTotal = 0; - } - c->Header.Tag.lower = c->busaddr; - memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); - - c->Request.Type.Type = cmd_type; - if (cmd_type == TYPE_CMD) { - switch (cmd) { - case CISS_INQUIRY: - /* are we trying to read a vital product page */ - if (page_code != 0) { - c->Request.CDB[1] = 0x01; - c->Request.CDB[2] = page_code; - } - c->Request.CDBLen = 6; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_READ; - c->Request.Timeout = 0; - c->Request.CDB[0] = CISS_INQUIRY; - c->Request.CDB[4] = size & 0xFF; - break; - case CISS_REPORT_LOG: - case CISS_REPORT_PHYS: - /* Talking to controller so It's a physical command - mode = 00 target = 0. Nothing to write. - */ - c->Request.CDBLen = 12; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_READ; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ - c->Request.CDB[7] = (size >> 16) & 0xFF; - c->Request.CDB[8] = (size >> 8) & 0xFF; - c->Request.CDB[9] = size & 0xFF; - break; - - case CCISS_READ_CAPACITY: - c->Request.CDBLen = 10; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_READ; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - break; - case CCISS_READ_CAPACITY_16: - c->Request.CDBLen = 16; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_READ; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - c->Request.CDB[1] = 0x10; - c->Request.CDB[10] = (size >> 24) & 0xFF; - c->Request.CDB[11] = (size >> 16) & 0xFF; - c->Request.CDB[12] = (size >> 8) & 0xFF; - c->Request.CDB[13] = size & 0xFF; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - break; - case CCISS_CACHE_FLUSH: - c->Request.CDBLen = 12; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; - c->Request.Timeout = 0; - c->Request.CDB[0] = BMIC_WRITE; - c->Request.CDB[6] = BMIC_CACHE_FLUSH; - c->Request.CDB[7] = (size >> 8) & 0xFF; - c->Request.CDB[8] = size & 0xFF; - break; - case TEST_UNIT_READY: - c->Request.CDBLen = 6; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_NONE; - c->Request.Timeout = 0; - break; - default: - dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd); - return IO_ERROR; - } - } else if (cmd_type == TYPE_MSG) { - switch (cmd) { - case CCISS_ABORT_MSG: - c->Request.CDBLen = 12; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; /* abort */ - c->Request.CDB[1] = 0; /* abort a command */ - /* buff contains the tag of the command to abort */ - memcpy(&c->Request.CDB[4], buff, 8); - break; - case CCISS_RESET_MSG: - c->Request.CDBLen = 16; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_NONE; - c->Request.Timeout = 0; - memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); - c->Request.CDB[0] = cmd; /* reset */ - c->Request.CDB[1] = CCISS_RESET_TYPE_TARGET; - break; - case CCISS_NOOP_MSG: - c->Request.CDBLen = 1; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - break; - default: - dev_warn(&h->pdev->dev, - "unknown message type %d\n", cmd); - return IO_ERROR; - } - } else { - dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); - return IO_ERROR; - } - /* Fill in the scatter gather information */ - if (size > 0) { - buff_dma_handle.val = (__u64) pci_map_single(h->pdev, - buff, size, - PCI_DMA_BIDIRECTIONAL); - c->SG[0].Addr.lower = buff_dma_handle.val32.lower; - c->SG[0].Addr.upper = buff_dma_handle.val32.upper; - c->SG[0].Len = size; - c->SG[0].Ext = 0; /* we are not chaining */ - } - return status; -} - -static int cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr, - u8 reset_type) -{ - CommandList_struct *c; - int return_status; - - c = cmd_alloc(h); - if (!c) - return -ENOMEM; - return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0, - CTLR_LUNID, TYPE_MSG); - c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ - if (return_status != IO_OK) { - cmd_special_free(h, c); - return return_status; - } - c->waiting = NULL; - enqueue_cmd_and_start_io(h, c); - /* Don't wait for completion, the reset won't complete. Don't free - * the command either. This is the last command we will send before - * re-initializing everything, so it doesn't matter and won't leak. - */ - return 0; -} - -static int check_target_status(ctlr_info_t *h, CommandList_struct *c) -{ - switch (c->err_info->ScsiStatus) { - case SAM_STAT_GOOD: - return IO_OK; - case SAM_STAT_CHECK_CONDITION: - switch (0xf & c->err_info->SenseInfo[2]) { - case 0: return IO_OK; /* no sense */ - case 1: return IO_OK; /* recovered error */ - default: - if (check_for_unit_attention(h, c)) - return IO_NEEDS_RETRY; - dev_warn(&h->pdev->dev, "cmd 0x%02x " - "check condition, sense key = 0x%02x\n", - c->Request.CDB[0], c->err_info->SenseInfo[2]); - } - break; - default: - dev_warn(&h->pdev->dev, "cmd 0x%02x" - "scsi status = 0x%02x\n", - c->Request.CDB[0], c->err_info->ScsiStatus); - break; - } - return IO_ERROR; -} - -static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c) -{ - int return_status = IO_OK; - - if (c->err_info->CommandStatus == CMD_SUCCESS) - return IO_OK; - - switch (c->err_info->CommandStatus) { - case CMD_TARGET_STATUS: - return_status = check_target_status(h, c); - break; - case CMD_DATA_UNDERRUN: - case CMD_DATA_OVERRUN: - /* expected for inquiry and report lun commands */ - break; - case CMD_INVALID: - dev_warn(&h->pdev->dev, "cmd 0x%02x is " - "reported invalid\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_PROTOCOL_ERR: - dev_warn(&h->pdev->dev, "cmd 0x%02x has " - "protocol error\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_HARDWARE_ERR: - dev_warn(&h->pdev->dev, "cmd 0x%02x had " - " hardware error\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_CONNECTION_LOST: - dev_warn(&h->pdev->dev, "cmd 0x%02x had " - "connection lost\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_ABORTED: - dev_warn(&h->pdev->dev, "cmd 0x%02x was " - "aborted\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_ABORT_FAILED: - dev_warn(&h->pdev->dev, "cmd 0x%02x reports " - "abort failed\n", c->Request.CDB[0]); - return_status = IO_ERROR; - break; - case CMD_UNSOLICITED_ABORT: - dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n", - c->Request.CDB[0]); - return_status = IO_NEEDS_RETRY; - break; - case CMD_UNABORTABLE: - dev_warn(&h->pdev->dev, "cmd unabortable\n"); - return_status = IO_ERROR; - break; - default: - dev_warn(&h->pdev->dev, "cmd 0x%02x returned " - "unknown status %x\n", c->Request.CDB[0], - c->err_info->CommandStatus); - return_status = IO_ERROR; - } - return return_status; -} - -static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, - int attempt_retry) -{ - DECLARE_COMPLETION_ONSTACK(wait); - u64bit buff_dma_handle; - int return_status = IO_OK; - -resend_cmd2: - c->waiting = &wait; - enqueue_cmd_and_start_io(h, c); - - wait_for_completion(&wait); - - if (c->err_info->CommandStatus == 0 || !attempt_retry) - goto command_done; - - return_status = process_sendcmd_error(h, c); - - if (return_status == IO_NEEDS_RETRY && - c->retry_count < MAX_CMD_RETRIES) { - dev_warn(&h->pdev->dev, "retrying 0x%02x\n", - c->Request.CDB[0]); - c->retry_count++; - /* erase the old error information */ - memset(c->err_info, 0, sizeof(ErrorInfo_struct)); - return_status = IO_OK; - reinit_completion(&wait); - goto resend_cmd2; - } - -command_done: - /* unlock the buffers from DMA */ - buff_dma_handle.val32.lower = c->SG[0].Addr.lower; - buff_dma_handle.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, - c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); - return return_status; -} - -static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size, - __u8 page_code, unsigned char scsi3addr[], - int cmd_type) -{ - CommandList_struct *c; - int return_status; - - c = cmd_special_alloc(h); - if (!c) - return -ENOMEM; - return_status = fill_cmd(h, c, cmd, buff, size, page_code, - scsi3addr, cmd_type); - if (return_status == IO_OK) - return_status = sendcmd_withirq_core(h, c, 1); - - cmd_special_free(h, c); - return return_status; -} - -static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol, - sector_t total_size, - unsigned int block_size, - InquiryData_struct *inq_buff, - drive_info_struct *drv) -{ - int return_code; - unsigned long t; - unsigned char scsi3addr[8]; - - memset(inq_buff, 0, sizeof(InquiryData_struct)); - log_unit_to_scsi3addr(h, scsi3addr, logvol); - return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff, - sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD); - if (return_code == IO_OK) { - if (inq_buff->data_byte[8] == 0xFF) { - dev_warn(&h->pdev->dev, - "reading geometry failed, volume " - "does not support reading geometry\n"); - drv->heads = 255; - drv->sectors = 32; /* Sectors per track */ - drv->cylinders = total_size + 1; - drv->raid_level = RAID_UNKNOWN; - } else { - drv->heads = inq_buff->data_byte[6]; - drv->sectors = inq_buff->data_byte[7]; - drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8; - drv->cylinders += inq_buff->data_byte[5]; - drv->raid_level = inq_buff->data_byte[8]; - } - drv->block_size = block_size; - drv->nr_blocks = total_size + 1; - t = drv->heads * drv->sectors; - if (t > 1) { - sector_t real_size = total_size + 1; - unsigned long rem = sector_div(real_size, t); - if (rem) - real_size++; - drv->cylinders = real_size; - } - } else { /* Get geometry failed */ - dev_warn(&h->pdev->dev, "reading geometry failed\n"); - } -} - -static void -cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size, - unsigned int *block_size) -{ - ReadCapdata_struct *buf; - int return_code; - unsigned char scsi3addr[8]; - - buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); - if (!buf) { - dev_warn(&h->pdev->dev, "out of memory\n"); - return; - } - - log_unit_to_scsi3addr(h, scsi3addr, logvol); - return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf, - sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD); - if (return_code == IO_OK) { - *total_size = be32_to_cpu(*(__be32 *) buf->total_size); - *block_size = be32_to_cpu(*(__be32 *) buf->block_size); - } else { /* read capacity command failed */ - dev_warn(&h->pdev->dev, "read capacity failed\n"); - *total_size = 0; - *block_size = BLOCK_SIZE; - } - kfree(buf); -} - -static void cciss_read_capacity_16(ctlr_info_t *h, int logvol, - sector_t *total_size, unsigned int *block_size) -{ - ReadCapdata_struct_16 *buf; - int return_code; - unsigned char scsi3addr[8]; - - buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL); - if (!buf) { - dev_warn(&h->pdev->dev, "out of memory\n"); - return; - } - - log_unit_to_scsi3addr(h, scsi3addr, logvol); - return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16, - buf, sizeof(ReadCapdata_struct_16), - 0, scsi3addr, TYPE_CMD); - if (return_code == IO_OK) { - *total_size = be64_to_cpu(*(__be64 *) buf->total_size); - *block_size = be32_to_cpu(*(__be32 *) buf->block_size); - } else { /* read capacity command failed */ - dev_warn(&h->pdev->dev, "read capacity failed\n"); - *total_size = 0; - *block_size = BLOCK_SIZE; - } - dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n", - (unsigned long long)*total_size+1, *block_size); - kfree(buf); -} - -static int cciss_revalidate(struct gendisk *disk) -{ - ctlr_info_t *h = get_host(disk); - drive_info_struct *drv = get_drv(disk); - int logvol; - int FOUND = 0; - unsigned int block_size; - sector_t total_size; - InquiryData_struct *inq_buff = NULL; - - for (logvol = 0; logvol <= h->highest_lun; logvol++) { - if (!h->drv[logvol]) - continue; - if (memcmp(h->drv[logvol]->LunID, drv->LunID, - sizeof(drv->LunID)) == 0) { - FOUND = 1; - break; - } - } - - if (!FOUND) - return 1; - - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - dev_warn(&h->pdev->dev, "out of memory\n"); - return 1; - } - if (h->cciss_read == CCISS_READ_10) { - cciss_read_capacity(h, logvol, - &total_size, &block_size); - } else { - cciss_read_capacity_16(h, logvol, - &total_size, &block_size); - } - cciss_geometry_inquiry(h, logvol, total_size, block_size, - inq_buff, drv); - - blk_queue_logical_block_size(drv->queue, drv->block_size); - set_capacity(disk, drv->nr_blocks); - - kfree(inq_buff); - return 0; -} - -/* - * Map (physical) PCI mem into (virtual) kernel space - */ -static void __iomem *remap_pci_mem(ulong base, ulong size) -{ - ulong page_base = ((ulong) base) & PAGE_MASK; - ulong page_offs = ((ulong) base) - page_base; - void __iomem *page_remapped = ioremap(page_base, page_offs + size); - - return page_remapped ? (page_remapped + page_offs) : NULL; -} - -/* - * Takes jobs of the Q and sends them to the hardware, then puts it on - * the Q to wait for completion. - */ -static void start_io(ctlr_info_t *h) -{ - CommandList_struct *c; - - while (!list_empty(&h->reqQ)) { - c = list_entry(h->reqQ.next, CommandList_struct, list); - /* can't do anything if fifo is full */ - if ((h->access.fifo_full(h))) { - dev_warn(&h->pdev->dev, "fifo full\n"); - break; - } - - /* Get the first entry from the Request Q */ - removeQ(c); - h->Qdepth--; - - /* Tell the controller execute command */ - h->access.submit_command(h, c); - - /* Put job onto the completed Q */ - addQ(&h->cmpQ, c); - } -} - -/* Assumes that h->lock is held. */ -/* Zeros out the error record and then resends the command back */ -/* to the controller */ -static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) -{ - /* erase the old error information */ - memset(c->err_info, 0, sizeof(ErrorInfo_struct)); - - /* add it to software queue and then send it to the controller */ - addQ(&h->reqQ, c); - h->Qdepth++; - if (h->Qdepth > h->maxQsinceinit) - h->maxQsinceinit = h->Qdepth; - - start_io(h); -} - -static inline unsigned int make_status_bytes(unsigned int scsi_status_byte, - unsigned int msg_byte, unsigned int host_byte, - unsigned int driver_byte) -{ - /* inverse of macros in scsi.h */ - return (scsi_status_byte & 0xff) | - ((msg_byte & 0xff) << 8) | - ((host_byte & 0xff) << 16) | - ((driver_byte & 0xff) << 24); -} - -static inline int evaluate_target_status(ctlr_info_t *h, - CommandList_struct *cmd, int *retry_cmd) -{ - unsigned char sense_key; - unsigned char status_byte, msg_byte, host_byte, driver_byte; - int error_value; - - *retry_cmd = 0; - /* If we get in here, it means we got "target status", that is, scsi status */ - status_byte = cmd->err_info->ScsiStatus; - driver_byte = DRIVER_OK; - msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */ - - if (blk_rq_is_passthrough(cmd->rq)) - host_byte = DID_PASSTHROUGH; - else - host_byte = DID_OK; - - error_value = make_status_bytes(status_byte, msg_byte, - host_byte, driver_byte); - - if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) { - if (!blk_rq_is_passthrough(cmd->rq)) - dev_warn(&h->pdev->dev, "cmd %p " - "has SCSI Status 0x%x\n", - cmd, cmd->err_info->ScsiStatus); - return error_value; - } - - /* check the sense key */ - sense_key = 0xf & cmd->err_info->SenseInfo[2]; - /* no status or recovered error */ - if (((sense_key == 0x0) || (sense_key == 0x1)) && - !blk_rq_is_passthrough(cmd->rq)) - error_value = 0; - - if (check_for_unit_attention(h, cmd)) { - *retry_cmd = !blk_rq_is_passthrough(cmd->rq); - return 0; - } - - /* Not SG_IO or similar? */ - if (!blk_rq_is_passthrough(cmd->rq)) { - if (error_value != 0) - dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION" - " sense key = 0x%x\n", cmd, sense_key); - return error_value; - } - - scsi_req(cmd->rq)->sense_len = cmd->err_info->SenseLen; - return error_value; -} - -/* checks the status of the job and calls complete buffers to mark all - * buffers for the completed job. Note that this function does not need - * to hold the hba/queue lock. - */ -static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd, - int timeout) -{ - int retry_cmd = 0; - struct request *rq = cmd->rq; - struct scsi_request *sreq = scsi_req(rq); - - sreq->result = 0; - - if (timeout) - sreq->result = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT); - - if (cmd->err_info->CommandStatus == 0) /* no error has occurred */ - goto after_error_processing; - - switch (cmd->err_info->CommandStatus) { - case CMD_TARGET_STATUS: - sreq->result = evaluate_target_status(h, cmd, &retry_cmd); - break; - case CMD_DATA_UNDERRUN: - if (!blk_rq_is_passthrough(cmd->rq)) { - dev_warn(&h->pdev->dev, "cmd %p has" - " completed with data underrun " - "reported\n", cmd); - } - break; - case CMD_DATA_OVERRUN: - if (!blk_rq_is_passthrough(cmd->rq)) - dev_warn(&h->pdev->dev, "cciss: cmd %p has" - " completed with data overrun " - "reported\n", cmd); - break; - case CMD_INVALID: - dev_warn(&h->pdev->dev, "cciss: cmd %p is " - "reported invalid\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_PROTOCOL_ERR: - dev_warn(&h->pdev->dev, "cciss: cmd %p has " - "protocol error\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_HARDWARE_ERR: - dev_warn(&h->pdev->dev, "cciss: cmd %p had " - " hardware error\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_CONNECTION_LOST: - dev_warn(&h->pdev->dev, "cciss: cmd %p had " - "connection lost\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_ABORTED: - dev_warn(&h->pdev->dev, "cciss: cmd %p was " - "aborted\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ABORT); - break; - case CMD_ABORT_FAILED: - dev_warn(&h->pdev->dev, "cciss: cmd %p reports " - "abort failed\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_UNSOLICITED_ABORT: - dev_warn(&h->pdev->dev, "cciss%d: unsolicited " - "abort %p\n", h->ctlr, cmd); - if (cmd->retry_count < MAX_CMD_RETRIES) { - retry_cmd = 1; - dev_warn(&h->pdev->dev, "retrying %p\n", cmd); - cmd->retry_count++; - } else - dev_warn(&h->pdev->dev, - "%p retried too many times\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ABORT); - break; - case CMD_TIMEOUT: - dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - case CMD_UNABORTABLE: - dev_warn(&h->pdev->dev, "cmd %p unabortable\n", cmd); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - break; - default: - dev_warn(&h->pdev->dev, "cmd %p returned " - "unknown status %x\n", cmd, - cmd->err_info->CommandStatus); - sreq->result = make_status_bytes(SAM_STAT_GOOD, - cmd->err_info->CommandStatus, DRIVER_OK, - blk_rq_is_passthrough(cmd->rq) ? - DID_PASSTHROUGH : DID_ERROR); - } - -after_error_processing: - - /* We need to return this command */ - if (retry_cmd) { - resend_cciss_cmd(h, cmd); - return; - } - cmd->rq->completion_data = cmd; - blk_complete_request(cmd->rq); -} - -static inline u32 cciss_tag_contains_index(u32 tag) -{ -#define DIRECT_LOOKUP_BIT 0x10 - return tag & DIRECT_LOOKUP_BIT; -} - -static inline u32 cciss_tag_to_index(u32 tag) -{ -#define DIRECT_LOOKUP_SHIFT 5 - return tag >> DIRECT_LOOKUP_SHIFT; -} - -static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag) -{ -#define CCISS_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1) -#define CCISS_SIMPLE_ERROR_BITS 0x03 - if (likely(h->transMethod & CFGTBL_Trans_Performant)) - return tag & ~CCISS_PERF_ERROR_BITS; - return tag & ~CCISS_SIMPLE_ERROR_BITS; -} - -static inline void cciss_mark_tag_indexed(u32 *tag) -{ - *tag |= DIRECT_LOOKUP_BIT; -} - -static inline void cciss_set_tag_index(u32 *tag, u32 index) -{ - *tag |= (index << DIRECT_LOOKUP_SHIFT); -} - -/* - * Get a request and submit it to the controller. - */ -static void do_cciss_request(struct request_queue *q) -{ - ctlr_info_t *h = q->queuedata; - CommandList_struct *c; - sector_t start_blk; - int seg; - struct request *creq; - u64bit temp64; - struct scatterlist *tmp_sg; - SGDescriptor_struct *curr_sg; - drive_info_struct *drv; - int i, dir; - int sg_index = 0; - int chained = 0; - - queue: - creq = blk_peek_request(q); - if (!creq) - goto startio; - - BUG_ON(creq->nr_phys_segments > h->maxsgentries); - - c = cmd_alloc(h); - if (!c) - goto full; - - blk_start_request(creq); - - tmp_sg = h->scatter_list[c->cmdindex]; - spin_unlock_irq(q->queue_lock); - - c->cmd_type = CMD_RWREQ; - c->rq = creq; - - /* fill in the request */ - drv = creq->rq_disk->private_data; - c->Header.ReplyQueue = 0; /* unused in simple mode */ - /* got command from pool, so use the command block index instead */ - /* for direct lookups. */ - /* The first 2 bits are reserved for controller error reporting. */ - cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex); - cciss_mark_tag_indexed(&c->Header.Tag.lower); - memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID)); - c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */ - c->Request.Type.Type = TYPE_CMD; /* It is a command. */ - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = - (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE; - c->Request.Timeout = 0; /* Don't time out */ - c->Request.CDB[0] = - (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write; - start_blk = blk_rq_pos(creq); - dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n", - (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq)); - sg_init_table(tmp_sg, h->maxsgentries); - seg = blk_rq_map_sg(q, creq, tmp_sg); - - /* get the DMA records for the setup */ - if (c->Request.Type.Direction == XFER_READ) - dir = PCI_DMA_FROMDEVICE; - else - dir = PCI_DMA_TODEVICE; - - curr_sg = c->SG; - sg_index = 0; - chained = 0; - - for (i = 0; i < seg; i++) { - if (((sg_index+1) == (h->max_cmd_sgentries)) && - !chained && ((seg - i) > 1)) { - /* Point to next chain block. */ - curr_sg = h->cmd_sg_list[c->cmdindex]; - sg_index = 0; - chained = 1; - } - curr_sg[sg_index].Len = tmp_sg[i].length; - temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]), - tmp_sg[i].offset, - tmp_sg[i].length, dir); - if (dma_mapping_error(&h->pdev->dev, temp64.val)) { - dev_warn(&h->pdev->dev, - "%s: error mapping page for DMA\n", __func__); - scsi_req(creq)->result = - make_status_bytes(SAM_STAT_GOOD, 0, DRIVER_OK, - DID_SOFT_ERROR); - cmd_free(h, c); - return; - } - curr_sg[sg_index].Addr.lower = temp64.val32.lower; - curr_sg[sg_index].Addr.upper = temp64.val32.upper; - curr_sg[sg_index].Ext = 0; /* we are not chaining */ - ++sg_index; - } - if (chained) { - if (cciss_map_sg_chain_block(h, c, h->cmd_sg_list[c->cmdindex], - (seg - (h->max_cmd_sgentries - 1)) * - sizeof(SGDescriptor_struct))) { - scsi_req(creq)->result = - make_status_bytes(SAM_STAT_GOOD, 0, DRIVER_OK, - DID_SOFT_ERROR); - cmd_free(h, c); - return; - } - } - - /* track how many SG entries we are using */ - if (seg > h->maxSG) - h->maxSG = seg; - - dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments " - "chained[%d]\n", - blk_rq_sectors(creq), seg, chained); - - c->Header.SGTotal = seg + chained; - if (seg <= h->max_cmd_sgentries) - c->Header.SGList = c->Header.SGTotal; - else - c->Header.SGList = h->max_cmd_sgentries; - set_performant_mode(h, c); - - switch (req_op(creq)) { - case REQ_OP_READ: - case REQ_OP_WRITE: - if(h->cciss_read == CCISS_READ_10) { - c->Request.CDB[1] = 0; - c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */ - c->Request.CDB[3] = (start_blk >> 16) & 0xff; - c->Request.CDB[4] = (start_blk >> 8) & 0xff; - c->Request.CDB[5] = start_blk & 0xff; - c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */ - c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff; - c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff; - c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; - } else { - u32 upper32 = upper_32_bits(start_blk); - - c->Request.CDBLen = 16; - c->Request.CDB[1]= 0; - c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */ - c->Request.CDB[3]= (upper32 >> 16) & 0xff; - c->Request.CDB[4]= (upper32 >> 8) & 0xff; - c->Request.CDB[5]= upper32 & 0xff; - c->Request.CDB[6]= (start_blk >> 24) & 0xff; - c->Request.CDB[7]= (start_blk >> 16) & 0xff; - c->Request.CDB[8]= (start_blk >> 8) & 0xff; - c->Request.CDB[9]= start_blk & 0xff; - c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff; - c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff; - c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff; - c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff; - c->Request.CDB[14] = c->Request.CDB[15] = 0; - } - break; - case REQ_OP_SCSI_IN: - case REQ_OP_SCSI_OUT: - c->Request.CDBLen = scsi_req(creq)->cmd_len; - memcpy(c->Request.CDB, scsi_req(creq)->cmd, BLK_MAX_CDB); - scsi_req(creq)->sense = c->err_info->SenseInfo; - break; - default: - dev_warn(&h->pdev->dev, "bad request type %d\n", - creq->cmd_flags); - BUG(); - } - - spin_lock_irq(q->queue_lock); - - addQ(&h->reqQ, c); - h->Qdepth++; - if (h->Qdepth > h->maxQsinceinit) - h->maxQsinceinit = h->Qdepth; - - goto queue; -full: - blk_stop_queue(q); -startio: - /* We will already have the driver lock here so not need - * to lock it. - */ - start_io(h); -} - -static inline unsigned long get_next_completion(ctlr_info_t *h) -{ - return h->access.command_completed(h); -} - -static inline int interrupt_pending(ctlr_info_t *h) -{ - return h->access.intr_pending(h); -} - -static inline long interrupt_not_for_us(ctlr_info_t *h) -{ - return ((h->access.intr_pending(h) == 0) || - (h->interrupts_enabled == 0)); -} - -static inline int bad_tag(ctlr_info_t *h, u32 tag_index, - u32 raw_tag) -{ - if (unlikely(tag_index >= h->nr_cmds)) { - dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); - return 1; - } - return 0; -} - -static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c, - u32 raw_tag) -{ - removeQ(c); - if (likely(c->cmd_type == CMD_RWREQ)) - complete_command(h, c, 0); - else if (c->cmd_type == CMD_IOCTL_PEND) - complete(c->waiting); -#ifdef CONFIG_CISS_SCSI_TAPE - else if (c->cmd_type == CMD_SCSI) - complete_scsi_command(c, 0, raw_tag); -#endif -} - -static inline u32 next_command(ctlr_info_t *h) -{ - u32 a; - - if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant))) - return h->access.command_completed(h); - - if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { - a = *(h->reply_pool_head); /* Next cmd in ring buffer */ - (h->reply_pool_head)++; - h->commands_outstanding--; - } else { - a = FIFO_EMPTY; - } - /* Check for wraparound */ - if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { - h->reply_pool_head = h->reply_pool; - h->reply_pool_wraparound ^= 1; - } - return a; -} - -/* process completion of an indexed ("direct lookup") command */ -static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag) -{ - u32 tag_index; - CommandList_struct *c; - - tag_index = cciss_tag_to_index(raw_tag); - if (bad_tag(h, tag_index, raw_tag)) - return next_command(h); - c = h->cmd_pool + tag_index; - finish_cmd(h, c, raw_tag); - return next_command(h); -} - -/* process completion of a non-indexed command */ -static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag) -{ - CommandList_struct *c = NULL; - __u32 busaddr_masked, tag_masked; - - tag_masked = cciss_tag_discard_error_bits(h, raw_tag); - list_for_each_entry(c, &h->cmpQ, list) { - busaddr_masked = cciss_tag_discard_error_bits(h, c->busaddr); - if (busaddr_masked == tag_masked) { - finish_cmd(h, c, raw_tag); - return next_command(h); - } - } - bad_tag(h, h->nr_cmds + 1, raw_tag); - return next_command(h); -} - -/* Some controllers, like p400, will give us one interrupt - * after a soft reset, even if we turned interrupts off. - * Only need to check for this in the cciss_xxx_discard_completions - * functions. - */ -static int ignore_bogus_interrupt(ctlr_info_t *h) -{ - if (likely(!reset_devices)) - return 0; - - if (likely(h->interrupts_enabled)) - return 0; - - dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled " - "(known firmware bug.) Ignoring.\n"); - - return 1; -} - -static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id) -{ - ctlr_info_t *h = dev_id; - unsigned long flags; - u32 raw_tag; - - if (ignore_bogus_interrupt(h)) - return IRQ_NONE; - - if (interrupt_not_for_us(h)) - return IRQ_NONE; - spin_lock_irqsave(&h->lock, flags); - while (interrupt_pending(h)) { - raw_tag = get_next_completion(h); - while (raw_tag != FIFO_EMPTY) - raw_tag = next_command(h); - } - spin_unlock_irqrestore(&h->lock, flags); - return IRQ_HANDLED; -} - -static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id) -{ - ctlr_info_t *h = dev_id; - unsigned long flags; - u32 raw_tag; - - if (ignore_bogus_interrupt(h)) - return IRQ_NONE; - - spin_lock_irqsave(&h->lock, flags); - raw_tag = get_next_completion(h); - while (raw_tag != FIFO_EMPTY) - raw_tag = next_command(h); - spin_unlock_irqrestore(&h->lock, flags); - return IRQ_HANDLED; -} - -static irqreturn_t do_cciss_intx(int irq, void *dev_id) -{ - ctlr_info_t *h = dev_id; - unsigned long flags; - u32 raw_tag; - - if (interrupt_not_for_us(h)) - return IRQ_NONE; - spin_lock_irqsave(&h->lock, flags); - while (interrupt_pending(h)) { - raw_tag = get_next_completion(h); - while (raw_tag != FIFO_EMPTY) { - if (cciss_tag_contains_index(raw_tag)) - raw_tag = process_indexed_cmd(h, raw_tag); - else - raw_tag = process_nonindexed_cmd(h, raw_tag); - } - } - spin_unlock_irqrestore(&h->lock, flags); - return IRQ_HANDLED; -} - -/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never - * check the interrupt pending register because it is not set. - */ -static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id) -{ - ctlr_info_t *h = dev_id; - unsigned long flags; - u32 raw_tag; - - spin_lock_irqsave(&h->lock, flags); - raw_tag = get_next_completion(h); - while (raw_tag != FIFO_EMPTY) { - if (cciss_tag_contains_index(raw_tag)) - raw_tag = process_indexed_cmd(h, raw_tag); - else - raw_tag = process_nonindexed_cmd(h, raw_tag); - } - spin_unlock_irqrestore(&h->lock, flags); - return IRQ_HANDLED; -} - -/** - * add_to_scan_list() - add controller to rescan queue - * @h: Pointer to the controller. - * - * Adds the controller to the rescan queue if not already on the queue. - * - * returns 1 if added to the queue, 0 if skipped (could be on the - * queue already, or the controller could be initializing or shutting - * down). - **/ -static int add_to_scan_list(struct ctlr_info *h) -{ - struct ctlr_info *test_h; - int found = 0; - int ret = 0; - - if (h->busy_initializing) - return 0; - - if (!mutex_trylock(&h->busy_shutting_down)) - return 0; - - mutex_lock(&scan_mutex); - list_for_each_entry(test_h, &scan_q, scan_list) { - if (test_h == h) { - found = 1; - break; - } - } - if (!found && !h->busy_scanning) { - reinit_completion(&h->scan_wait); - list_add_tail(&h->scan_list, &scan_q); - ret = 1; - } - mutex_unlock(&scan_mutex); - mutex_unlock(&h->busy_shutting_down); - - return ret; -} - -/** - * remove_from_scan_list() - remove controller from rescan queue - * @h: Pointer to the controller. - * - * Removes the controller from the rescan queue if present. Blocks if - * the controller is currently conducting a rescan. The controller - * can be in one of three states: - * 1. Doesn't need a scan - * 2. On the scan list, but not scanning yet (we remove it) - * 3. Busy scanning (and not on the list). In this case we want to wait for - * the scan to complete to make sure the scanning thread for this - * controller is completely idle. - **/ -static void remove_from_scan_list(struct ctlr_info *h) -{ - struct ctlr_info *test_h, *tmp_h; - - mutex_lock(&scan_mutex); - list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) { - if (test_h == h) { /* state 2. */ - list_del(&h->scan_list); - complete_all(&h->scan_wait); - mutex_unlock(&scan_mutex); - return; - } - } - if (h->busy_scanning) { /* state 3. */ - mutex_unlock(&scan_mutex); - wait_for_completion(&h->scan_wait); - } else { /* state 1, nothing to do. */ - mutex_unlock(&scan_mutex); - } -} - -/** - * scan_thread() - kernel thread used to rescan controllers - * @data: Ignored. - * - * A kernel thread used scan for drive topology changes on - * controllers. The thread processes only one controller at a time - * using a queue. Controllers are added to the queue using - * add_to_scan_list() and removed from the queue either after done - * processing or using remove_from_scan_list(). - * - * returns 0. - **/ -static int scan_thread(void *data) -{ - struct ctlr_info *h; - - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - schedule(); - if (kthread_should_stop()) - break; - - while (1) { - mutex_lock(&scan_mutex); - if (list_empty(&scan_q)) { - mutex_unlock(&scan_mutex); - break; - } - - h = list_entry(scan_q.next, - struct ctlr_info, - scan_list); - list_del(&h->scan_list); - h->busy_scanning = 1; - mutex_unlock(&scan_mutex); - - rebuild_lun_table(h, 0, 0); - complete_all(&h->scan_wait); - mutex_lock(&scan_mutex); - h->busy_scanning = 0; - mutex_unlock(&scan_mutex); - } - } - - return 0; -} - -static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c) -{ - if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) - return 0; - - switch (c->err_info->SenseInfo[12]) { - case STATE_CHANGED: - dev_warn(&h->pdev->dev, "a state change " - "detected, command retried\n"); - return 1; - break; - case LUN_FAILED: - dev_warn(&h->pdev->dev, "LUN failure " - "detected, action required\n"); - return 1; - break; - case REPORT_LUNS_CHANGED: - dev_warn(&h->pdev->dev, "report LUN data changed\n"); - /* - * Here, we could call add_to_scan_list and wake up the scan thread, - * except that it's quite likely that we will get more than one - * REPORT_LUNS_CHANGED condition in quick succession, which means - * that those which occur after the first one will likely happen - * *during* the scan_thread's rescan. And the rescan code is not - * robust enough to restart in the middle, undoing what it has already - * done, and it's not clear that it's even possible to do this, since - * part of what it does is notify the block layer, which starts - * doing it's own i/o to read partition tables and so on, and the - * driver doesn't have visibility to know what might need undoing. - * In any event, if possible, it is horribly complicated to get right - * so we just don't do it for now. - * - * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. - */ - return 1; - break; - case POWER_OR_RESET: - dev_warn(&h->pdev->dev, - "a power on or device reset detected\n"); - return 1; - break; - case UNIT_ATTENTION_CLEARED: - dev_warn(&h->pdev->dev, - "unit attention cleared by another initiator\n"); - return 1; - break; - default: - dev_warn(&h->pdev->dev, "unknown unit attention detected\n"); - return 1; - } -} - -/* - * We cannot read the structure directly, for portability we must use - * the io functions. - * This is for debug only. - */ -static void print_cfg_table(ctlr_info_t *h) -{ - int i; - char temp_name[17]; - CfgTable_struct *tb = h->cfgtable; - - dev_dbg(&h->pdev->dev, "Controller Configuration information\n"); - dev_dbg(&h->pdev->dev, "------------------------------------\n"); - for (i = 0; i < 4; i++) - temp_name[i] = readb(&(tb->Signature[i])); - temp_name[4] = '\0'; - dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name); - dev_dbg(&h->pdev->dev, " Spec Number = %d\n", - readl(&(tb->SpecValence))); - dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n", - readl(&(tb->TransportSupport))); - dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n", - readl(&(tb->TransportActive))); - dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n", - readl(&(tb->HostWrite.TransportRequest))); - dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n", - readl(&(tb->HostWrite.CoalIntDelay))); - dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n", - readl(&(tb->HostWrite.CoalIntCount))); - dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%x\n", - readl(&(tb->CmdsOutMax))); - dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n", - readl(&(tb->BusTypes))); - for (i = 0; i < 16; i++) - temp_name[i] = readb(&(tb->ServerName[i])); - temp_name[16] = '\0'; - dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name); - dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n", - readl(&(tb->HeartBeat))); -} - -static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) -{ - int i, offset, mem_type, bar_type; - if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ - return 0; - offset = 0; - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; - if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) - offset += 4; - else { - mem_type = pci_resource_flags(pdev, i) & - PCI_BASE_ADDRESS_MEM_TYPE_MASK; - switch (mem_type) { - case PCI_BASE_ADDRESS_MEM_TYPE_32: - case PCI_BASE_ADDRESS_MEM_TYPE_1M: - offset += 4; /* 32 bit */ - break; - case PCI_BASE_ADDRESS_MEM_TYPE_64: - offset += 8; - break; - default: /* reserved in PCI 2.2 */ - dev_warn(&pdev->dev, - "Base address is invalid\n"); - return -1; - break; - } - } - if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) - return i + 1; - } - return -1; -} - -/* Fill in bucket_map[], given nsgs (the max number of - * scatter gather elements supported) and bucket[], - * which is an array of 8 integers. The bucket[] array - * contains 8 different DMA transfer sizes (in 16 - * byte increments) which the controller uses to fetch - * commands. This function fills in bucket_map[], which - * maps a given number of scatter gather elements to one of - * the 8 DMA transfer sizes. The point of it is to allow the - * controller to only do as much DMA as needed to fetch the - * command, with the DMA transfer size encoded in the lower - * bits of the command address. - */ -static void calc_bucket_map(int bucket[], int num_buckets, - int nsgs, int *bucket_map) -{ - int i, j, b, size; - - /* even a command with 0 SGs requires 4 blocks */ -#define MINIMUM_TRANSFER_BLOCKS 4 -#define NUM_BUCKETS 8 - /* Note, bucket_map must have nsgs+1 entries. */ - for (i = 0; i <= nsgs; i++) { - /* Compute size of a command with i SG entries */ - size = i + MINIMUM_TRANSFER_BLOCKS; - b = num_buckets; /* Assume the biggest bucket */ - /* Find the bucket that is just big enough */ - for (j = 0; j < 8; j++) { - if (bucket[j] >= size) { - b = j; - break; - } - } - /* for a command with i SG entries, use bucket b. */ - bucket_map[i] = b; - } -} - -static void cciss_wait_for_mode_change_ack(ctlr_info_t *h) -{ - int i; - - /* under certain very rare conditions, this can take awhile. - * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right - * as we enter this code.) */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { - if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - usleep_range(10000, 20000); - } -} - -static void cciss_enter_performant_mode(ctlr_info_t *h, u32 use_short_tags) -{ - /* This is a bit complicated. There are 8 registers on - * the controller which we write to to tell it 8 different - * sizes of commands which there may be. It's a way of - * reducing the DMA done to fetch each command. Encoded into - * each command's tag are 3 bits which communicate to the controller - * which of the eight sizes that command fits within. The size of - * each command depends on how many scatter gather entries there are. - * Each SG entry requires 16 bytes. The eight registers are programmed - * with the number of 16-byte blocks a command of that size requires. - * The smallest command possible requires 5 such 16 byte blocks. - * the largest command possible requires MAXSGENTRIES + 4 16-byte - * blocks. Note, this only extends to the SG entries contained - * within the command block, and does not extend to chained blocks - * of SG elements. bft[] contains the eight values we write to - * the registers. They are not evenly distributed, but have more - * sizes for small commands, and fewer sizes for larger commands. - */ - __u32 trans_offset; - int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4}; - /* - * 5 = 1 s/g entry or 4k - * 6 = 2 s/g entry or 8k - * 8 = 4 s/g entry or 16k - * 10 = 6 s/g entry or 24k - */ - unsigned long register_value; - BUILD_BUG_ON(28 > MAXSGENTRIES + 4); - - h->reply_pool_wraparound = 1; /* spec: init to 1 */ - - /* Controller spec: zero out this buffer. */ - memset(h->reply_pool, 0, h->max_commands * sizeof(__u64)); - h->reply_pool_head = h->reply_pool; - - trans_offset = readl(&(h->cfgtable->TransMethodOffset)); - calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries, - h->blockFetchTable); - writel(bft[0], &h->transtable->BlockFetch0); - writel(bft[1], &h->transtable->BlockFetch1); - writel(bft[2], &h->transtable->BlockFetch2); - writel(bft[3], &h->transtable->BlockFetch3); - writel(bft[4], &h->transtable->BlockFetch4); - writel(bft[5], &h->transtable->BlockFetch5); - writel(bft[6], &h->transtable->BlockFetch6); - writel(bft[7], &h->transtable->BlockFetch7); - - /* size of controller ring buffer */ - writel(h->max_commands, &h->transtable->RepQSize); - writel(1, &h->transtable->RepQCount); - writel(0, &h->transtable->RepQCtrAddrLow32); - writel(0, &h->transtable->RepQCtrAddrHigh32); - writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32); - writel(0, &h->transtable->RepQAddr0High32); - writel(CFGTBL_Trans_Performant | use_short_tags, - &(h->cfgtable->HostWrite.TransportRequest)); - - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - cciss_wait_for_mode_change_ack(h); - register_value = readl(&(h->cfgtable->TransportActive)); - if (!(register_value & CFGTBL_Trans_Performant)) - dev_warn(&h->pdev->dev, "cciss: unable to get board into" - " performant mode\n"); -} - -static void cciss_put_controller_into_performant_mode(ctlr_info_t *h) -{ - __u32 trans_support; - - if (cciss_simple_mode) - return; - - dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n"); - /* Attempt to put controller into performant mode if supported */ - /* Does board support performant mode? */ - trans_support = readl(&(h->cfgtable->TransportSupport)); - if (!(trans_support & PERFORMANT_MODE)) - return; - - dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n"); - /* Performant mode demands commands on a 32 byte boundary - * pci_alloc_consistent aligns on page boundarys already. - * Just need to check if divisible by 32 - */ - if ((sizeof(CommandList_struct) % 32) != 0) { - dev_warn(&h->pdev->dev, "%s %d %s\n", - "cciss info: command size[", - (int)sizeof(CommandList_struct), - "] not divisible by 32, no performant mode..\n"); - return; - } - - /* Performant mode ring buffer and supporting data structures */ - h->reply_pool = (__u64 *)pci_alloc_consistent( - h->pdev, h->max_commands * sizeof(__u64), - &(h->reply_pool_dhandle)); - - /* Need a block fetch table for performant mode */ - h->blockFetchTable = kmalloc(((h->maxsgentries+1) * - sizeof(__u32)), GFP_KERNEL); - - if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL)) - goto clean_up; - - cciss_enter_performant_mode(h, - trans_support & CFGTBL_Trans_use_short_tags); - - /* Change the access methods to the performant access methods */ - h->access = SA5_performant_access; - h->transMethod = CFGTBL_Trans_Performant; - - return; -clean_up: - kfree(h->blockFetchTable); - if (h->reply_pool) - pci_free_consistent(h->pdev, - h->max_commands * sizeof(__u64), - h->reply_pool, - h->reply_pool_dhandle); - return; - -} /* cciss_put_controller_into_performant_mode */ - -/* If MSI/MSI-X is supported by the kernel we will try to enable it on - * controllers that are capable. If not, we use IO-APIC mode. - */ - -static void cciss_interrupt_mode(ctlr_info_t *h) -{ - int ret; - - /* Some boards advertise MSI but don't really support it */ - if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) || - (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11)) - goto default_int_mode; - - ret = pci_alloc_irq_vectors(h->pdev, 4, 4, PCI_IRQ_MSIX); - if (ret >= 0) { - h->intr[0] = pci_irq_vector(h->pdev, 0); - h->intr[1] = pci_irq_vector(h->pdev, 1); - h->intr[2] = pci_irq_vector(h->pdev, 2); - h->intr[3] = pci_irq_vector(h->pdev, 3); - return; - } - - ret = pci_alloc_irq_vectors(h->pdev, 1, 1, PCI_IRQ_MSI); - -default_int_mode: - /* if we get here we're going to use the default interrupt mode */ - h->intr[h->intr_mode] = pci_irq_vector(h->pdev, 0); - return; -} - -static int cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id) -{ - int i; - u32 subsystem_vendor_id, subsystem_device_id; - - subsystem_vendor_id = pdev->subsystem_vendor; - subsystem_device_id = pdev->subsystem_device; - *board_id = ((subsystem_device_id << 16) & 0xffff0000) | - subsystem_vendor_id; - - for (i = 0; i < ARRAY_SIZE(products); i++) { - /* Stand aside for hpsa driver on request */ - if (cciss_allow_hpsa) - return -ENODEV; - if (*board_id == products[i].board_id) - return i; - } - dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n", - *board_id); - return -ENODEV; -} - -static inline bool cciss_board_disabled(ctlr_info_t *h) -{ - u16 command; - - (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command); - return ((command & PCI_COMMAND_MEMORY) == 0); -} - -static int cciss_pci_find_memory_BAR(struct pci_dev *pdev, - unsigned long *memory_bar) -{ - int i; - - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) - if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { - /* addressing mode bits already removed */ - *memory_bar = pci_resource_start(pdev, i); - dev_dbg(&pdev->dev, "memory BAR = %lx\n", - *memory_bar); - return 0; - } - dev_warn(&pdev->dev, "no memory BAR found\n"); - return -ENODEV; -} - -static int cciss_wait_for_board_state(struct pci_dev *pdev, - void __iomem *vaddr, int wait_for_ready) -#define BOARD_READY 1 -#define BOARD_NOT_READY 0 -{ - int i, iterations; - u32 scratchpad; - - if (wait_for_ready) - iterations = CCISS_BOARD_READY_ITERATIONS; - else - iterations = CCISS_BOARD_NOT_READY_ITERATIONS; - - for (i = 0; i < iterations; i++) { - scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET); - if (wait_for_ready) { - if (scratchpad == CCISS_FIRMWARE_READY) - return 0; - } else { - if (scratchpad != CCISS_FIRMWARE_READY) - return 0; - } - msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS); - } - dev_warn(&pdev->dev, "board not ready, timed out.\n"); - return -ENODEV; -} - -static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, - u32 *cfg_base_addr, u64 *cfg_base_addr_index, - u64 *cfg_offset) -{ - *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET); - *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET); - *cfg_base_addr &= (u32) 0x0000ffff; - *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr); - if (*cfg_base_addr_index == -1) { - dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, " - "*cfg_base_addr = 0x%08x\n", *cfg_base_addr); - return -ENODEV; - } - return 0; -} - -static int cciss_find_cfgtables(ctlr_info_t *h) -{ - u64 cfg_offset; - u32 cfg_base_addr; - u64 cfg_base_addr_index; - u32 trans_offset; - int rc; - - rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, - &cfg_base_addr_index, &cfg_offset); - if (rc) - return rc; - h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev, - cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable)); - if (!h->cfgtable) - return -ENOMEM; - rc = write_driver_ver_to_cfgtable(h->cfgtable); - if (rc) - return rc; - /* Find performant mode table. */ - trans_offset = readl(&h->cfgtable->TransMethodOffset); - h->transtable = remap_pci_mem(pci_resource_start(h->pdev, - cfg_base_addr_index)+cfg_offset+trans_offset, - sizeof(*h->transtable)); - if (!h->transtable) - return -ENOMEM; - return 0; -} - -static void cciss_get_max_perf_mode_cmds(struct ctlr_info *h) -{ - h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); - - /* Limit commands in memory limited kdump scenario. */ - if (reset_devices && h->max_commands > 32) - h->max_commands = 32; - - if (h->max_commands < 16) { - dev_warn(&h->pdev->dev, "Controller reports " - "max supported commands of %d, an obvious lie. " - "Using 16. Ensure that firmware is up to date.\n", - h->max_commands); - h->max_commands = 16; - } -} - -/* Interrogate the hardware for some limits: - * max commands, max SG elements without chaining, and with chaining, - * SG chain block size, etc. - */ -static void cciss_find_board_params(ctlr_info_t *h) -{ - cciss_get_max_perf_mode_cmds(h); - h->nr_cmds = h->max_commands - 4 - cciss_tape_cmds; - h->maxsgentries = readl(&(h->cfgtable->MaxSGElements)); - /* - * The P600 may exhibit poor performnace under some workloads - * if we use the value in the configuration table. Limit this - * controller to MAXSGENTRIES (32) instead. - */ - if (h->board_id == 0x3225103C) - h->maxsgentries = MAXSGENTRIES; - /* - * Limit in-command s/g elements to 32 save dma'able memory. - * Howvever spec says if 0, use 31 - */ - h->max_cmd_sgentries = 31; - if (h->maxsgentries > 512) { - h->max_cmd_sgentries = 32; - h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1; - h->maxsgentries--; /* save one for chain pointer */ - } else { - h->maxsgentries = 31; /* default to traditional values */ - h->chainsize = 0; - } -} - -static inline bool CISS_signature_present(ctlr_info_t *h) -{ - if (!check_signature(h->cfgtable->Signature, "CISS", 4)) { - dev_warn(&h->pdev->dev, "not a valid CISS config table\n"); - return false; - } - return true; -} - -/* Need to enable prefetch in the SCSI core for 6400 in x86 */ -static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h) -{ -#ifdef CONFIG_X86 - u32 prefetch; - - prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); - prefetch |= 0x100; - writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); -#endif -} - -/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result - * in a prefetch beyond physical memory. - */ -static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h) -{ - u32 dma_prefetch; - __u32 dma_refetch; - - if (h->board_id != 0x3225103C) - return; - dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); - dma_prefetch |= 0x8000; - writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); - pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch); - dma_refetch |= 0x1; - pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch); -} - -static int cciss_pci_init(ctlr_info_t *h) -{ - int prod_index, err; - - prod_index = cciss_lookup_board_id(h->pdev, &h->board_id); - if (prod_index < 0) - return -ENODEV; - h->product_name = products[prod_index].product_name; - h->access = *(products[prod_index].access); - - if (cciss_board_disabled(h)) { - dev_warn(&h->pdev->dev, "controller appears to be disabled\n"); - return -ENODEV; - } - - pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | - PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); - - err = pci_enable_device(h->pdev); - if (err) { - dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n"); - return err; - } - - err = pci_request_regions(h->pdev, "cciss"); - if (err) { - dev_warn(&h->pdev->dev, - "Cannot obtain PCI resources, aborting\n"); - return err; - } - - dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq); - dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id); - -/* If the kernel supports MSI/MSI-X we will try to enable that functionality, - * else we use the IO-APIC interrupt assigned to us by system ROM. - */ - cciss_interrupt_mode(h); - err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr); - if (err) - goto err_out_free_res; - h->vaddr = remap_pci_mem(h->paddr, 0x250); - if (!h->vaddr) { - err = -ENOMEM; - goto err_out_free_res; - } - err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); - if (err) - goto err_out_free_res; - err = cciss_find_cfgtables(h); - if (err) - goto err_out_free_res; - print_cfg_table(h); - cciss_find_board_params(h); - - if (!CISS_signature_present(h)) { - err = -ENODEV; - goto err_out_free_res; - } - cciss_enable_scsi_prefetch(h); - cciss_p600_dma_prefetch_quirk(h); - err = cciss_enter_simple_mode(h); - if (err) - goto err_out_free_res; - cciss_put_controller_into_performant_mode(h); - return 0; - -err_out_free_res: - /* - * Deliberately omit pci_disable_device(): it does something nasty to - * Smart Array controllers that pci_enable_device does not undo - */ - if (h->transtable) - iounmap(h->transtable); - if (h->cfgtable) - iounmap(h->cfgtable); - if (h->vaddr) - iounmap(h->vaddr); - pci_release_regions(h->pdev); - return err; -} - -/* Function to find the first free pointer into our hba[] array - * Returns -1 if no free entries are left. - */ -static int alloc_cciss_hba(struct pci_dev *pdev) -{ - int i; - - for (i = 0; i < MAX_CTLR; i++) { - if (!hba[i]) { - ctlr_info_t *h; - - h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); - if (!h) - goto Enomem; - hba[i] = h; - return i; - } - } - dev_warn(&pdev->dev, "This driver supports a maximum" - " of %d controllers.\n", MAX_CTLR); - return -1; -Enomem: - dev_warn(&pdev->dev, "out of memory.\n"); - return -1; -} - -static void free_hba(ctlr_info_t *h) -{ - int i; - - hba[h->ctlr] = NULL; - for (i = 0; i < h->highest_lun + 1; i++) - if (h->gendisk[i] != NULL) - put_disk(h->gendisk[i]); - kfree(h); -} - -/* Send a message CDB to the firmware. */ -static int cciss_message(struct pci_dev *pdev, unsigned char opcode, - unsigned char type) -{ - typedef struct { - CommandListHeader_struct CommandHeader; - RequestBlock_struct Request; - ErrDescriptor_struct ErrorDescriptor; - } Command; - static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); - Command *cmd; - dma_addr_t paddr64; - uint32_t paddr32, tag; - void __iomem *vaddr; - int i, err; - - vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); - if (vaddr == NULL) - return -ENOMEM; - - /* The Inbound Post Queue only accepts 32-bit physical addresses for the - CCISS commands, so they must be allocated from the lower 4GiB of - memory. */ - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (err) { - iounmap(vaddr); - return -ENOMEM; - } - - cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); - if (cmd == NULL) { - iounmap(vaddr); - return -ENOMEM; - } - - /* This must fit, because of the 32-bit consistent DMA mask. Also, - although there's no guarantee, we assume that the address is at - least 4-byte aligned (most likely, it's page-aligned). */ - paddr32 = paddr64; - - cmd->CommandHeader.ReplyQueue = 0; - cmd->CommandHeader.SGList = 0; - cmd->CommandHeader.SGTotal = 0; - cmd->CommandHeader.Tag.lower = paddr32; - cmd->CommandHeader.Tag.upper = 0; - memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); - - cmd->Request.CDBLen = 16; - cmd->Request.Type.Type = TYPE_MSG; - cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; - cmd->Request.Type.Direction = XFER_NONE; - cmd->Request.Timeout = 0; /* Don't time out */ - cmd->Request.CDB[0] = opcode; - cmd->Request.CDB[1] = type; - memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ - - cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); - cmd->ErrorDescriptor.Addr.upper = 0; - cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); - - writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); - - for (i = 0; i < 10; i++) { - tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); - if ((tag & ~3) == paddr32) - break; - msleep(CCISS_POST_RESET_NOOP_TIMEOUT_MSECS); - } - - iounmap(vaddr); - - /* we leak the DMA buffer here ... no choice since the controller could - still complete the command. */ - if (i == 10) { - dev_err(&pdev->dev, - "controller message %02x:%02x timed out\n", - opcode, type); - return -ETIMEDOUT; - } - - pci_free_consistent(pdev, cmd_sz, cmd, paddr64); - - if (tag & 2) { - dev_err(&pdev->dev, "controller message %02x:%02x failed\n", - opcode, type); - return -EIO; - } - - dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", - opcode, type); - return 0; -} - -#define cciss_noop(p) cciss_message(p, 3, 0) - -static int cciss_controller_hard_reset(struct pci_dev *pdev, - void * __iomem vaddr, u32 use_doorbell) -{ - u16 pmcsr; - int pos; - - if (use_doorbell) { - /* For everything after the P600, the PCI power state method - * of resetting the controller doesn't work, so we have this - * other way using the doorbell register. - */ - dev_info(&pdev->dev, "using doorbell to reset controller\n"); - writel(use_doorbell, vaddr + SA5_DOORBELL); - } else { /* Try to do it the PCI power state way */ - - /* Quoting from the Open CISS Specification: "The Power - * Management Control/Status Register (CSR) controls the power - * state of the device. The normal operating state is D0, - * CSR=00h. The software off state is D3, CSR=03h. To reset - * the controller, place the interface device in D3 then to D0, - * this causes a secondary PCI reset which will reset the - * controller." */ - - pos = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (pos == 0) { - dev_err(&pdev->dev, - "cciss_controller_hard_reset: " - "PCI PM not supported\n"); - return -ENODEV; - } - dev_info(&pdev->dev, "using PCI PM to reset controller\n"); - /* enter the D3hot power management state */ - pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= PCI_D3hot; - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); - - msleep(500); - - /* enter the D0 power management state */ - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= PCI_D0; - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); - - /* - * The P600 requires a small delay when changing states. - * Otherwise we may think the board did not reset and we bail. - * This for kdump only and is particular to the P600. - */ - msleep(500); - } - return 0; -} - -static void init_driver_version(char *driver_version, int len) -{ - memset(driver_version, 0, len); - strncpy(driver_version, "cciss " DRIVER_NAME, len - 1); -} - -static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable) -{ - char *driver_version; - int i, size = sizeof(cfgtable->driver_version); - - driver_version = kmalloc(size, GFP_KERNEL); - if (!driver_version) - return -ENOMEM; - - init_driver_version(driver_version, size); - for (i = 0; i < size; i++) - writeb(driver_version[i], &cfgtable->driver_version[i]); - kfree(driver_version); - return 0; -} - -static void read_driver_ver_from_cfgtable(CfgTable_struct __iomem *cfgtable, - unsigned char *driver_ver) -{ - int i; - - for (i = 0; i < sizeof(cfgtable->driver_version); i++) - driver_ver[i] = readb(&cfgtable->driver_version[i]); -} - -static int controller_reset_failed(CfgTable_struct __iomem *cfgtable) -{ - - char *driver_ver, *old_driver_ver; - int rc, size = sizeof(cfgtable->driver_version); - - old_driver_ver = kmalloc(2 * size, GFP_KERNEL); - if (!old_driver_ver) - return -ENOMEM; - driver_ver = old_driver_ver + size; - - /* After a reset, the 32 bytes of "driver version" in the cfgtable - * should have been changed, otherwise we know the reset failed. - */ - init_driver_version(old_driver_ver, size); - read_driver_ver_from_cfgtable(cfgtable, driver_ver); - rc = !memcmp(driver_ver, old_driver_ver, size); - kfree(old_driver_ver); - return rc; -} - -/* This does a hard reset of the controller using PCI power management - * states or using the doorbell register. */ -static int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) -{ - u64 cfg_offset; - u32 cfg_base_addr; - u64 cfg_base_addr_index; - void __iomem *vaddr; - unsigned long paddr; - u32 misc_fw_support; - int rc; - CfgTable_struct __iomem *cfgtable; - u32 use_doorbell; - u32 board_id; - u16 command_register; - - /* For controllers as old a the p600, this is very nearly - * the same thing as - * - * pci_save_state(pci_dev); - * pci_set_power_state(pci_dev, PCI_D3hot); - * pci_set_power_state(pci_dev, PCI_D0); - * pci_restore_state(pci_dev); - * - * For controllers newer than the P600, the pci power state - * method of resetting doesn't work so we have another way - * using the doorbell register. - */ - - /* Exclude 640x boards. These are two pci devices in one slot - * which share a battery backed cache module. One controls the - * cache, the other accesses the cache through the one that controls - * it. If we reset the one controlling the cache, the other will - * likely not be happy. Just forbid resetting this conjoined mess. - */ - cciss_lookup_board_id(pdev, &board_id); - if (!ctlr_is_resettable(board_id)) { - dev_warn(&pdev->dev, "Controller not resettable\n"); - return -ENODEV; - } - - /* if controller is soft- but not hard resettable... */ - if (!ctlr_is_hard_resettable(board_id)) - return -ENOTSUPP; /* try soft reset later. */ - - /* Save the PCI command register */ - pci_read_config_word(pdev, 4, &command_register); - /* Turn the board off. This is so that later pci_restore_state() - * won't turn the board on before the rest of config space is ready. - */ - pci_disable_device(pdev); - pci_save_state(pdev); - - /* find the first memory BAR, so we can find the cfg table */ - rc = cciss_pci_find_memory_BAR(pdev, &paddr); - if (rc) - return rc; - vaddr = remap_pci_mem(paddr, 0x250); - if (!vaddr) - return -ENOMEM; - - /* find cfgtable in order to check if reset via doorbell is supported */ - rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr, - &cfg_base_addr_index, &cfg_offset); - if (rc) - goto unmap_vaddr; - cfgtable = remap_pci_mem(pci_resource_start(pdev, - cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable)); - if (!cfgtable) { - rc = -ENOMEM; - goto unmap_vaddr; - } - rc = write_driver_ver_to_cfgtable(cfgtable); - if (rc) - goto unmap_vaddr; - - /* If reset via doorbell register is supported, use that. - * There are two such methods. Favor the newest method. - */ - misc_fw_support = readl(&cfgtable->misc_fw_support); - use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2; - if (use_doorbell) { - use_doorbell = DOORBELL_CTLR_RESET2; - } else { - use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; - if (use_doorbell) { - dev_warn(&pdev->dev, "Controller claims that " - "'Bit 2 doorbell reset' is " - "supported, but not 'bit 5 doorbell reset'. " - "Firmware update is recommended.\n"); - rc = -ENOTSUPP; /* use the soft reset */ - goto unmap_cfgtable; - } - } - - rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell); - if (rc) - goto unmap_cfgtable; - pci_restore_state(pdev); - rc = pci_enable_device(pdev); - if (rc) { - dev_warn(&pdev->dev, "failed to enable device.\n"); - goto unmap_cfgtable; - } - pci_write_config_word(pdev, 4, command_register); - - /* Some devices (notably the HP Smart Array 5i Controller) - need a little pause here */ - msleep(CCISS_POST_RESET_PAUSE_MSECS); - - /* Wait for board to become not ready, then ready. */ - dev_info(&pdev->dev, "Waiting for board to reset.\n"); - rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY); - if (rc) { - dev_warn(&pdev->dev, "Failed waiting for board to hard reset." - " Will try soft reset.\n"); - rc = -ENOTSUPP; /* Not expected, but try soft reset later */ - goto unmap_cfgtable; - } - rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY); - if (rc) { - dev_warn(&pdev->dev, - "failed waiting for board to become ready " - "after hard reset\n"); - goto unmap_cfgtable; - } - - rc = controller_reset_failed(vaddr); - if (rc < 0) - goto unmap_cfgtable; - if (rc) { - dev_warn(&pdev->dev, "Unable to successfully hard reset " - "controller. Will try soft reset.\n"); - rc = -ENOTSUPP; /* Not expected, but try soft reset later */ - } else { - dev_info(&pdev->dev, "Board ready after hard reset.\n"); - } - -unmap_cfgtable: - iounmap(cfgtable); - -unmap_vaddr: - iounmap(vaddr); - return rc; -} - -static int cciss_init_reset_devices(struct pci_dev *pdev) -{ - int rc, i; - - if (!reset_devices) - return 0; - - /* Reset the controller with a PCI power-cycle or via doorbell */ - rc = cciss_kdump_hard_reset_controller(pdev); - - /* -ENOTSUPP here means we cannot reset the controller - * but it's already (and still) up and running in - * "performant mode". Or, it might be 640x, which can't reset - * due to concerns about shared bbwc between 6402/6404 pair. - */ - if (rc == -ENOTSUPP) - return rc; /* just try to do the kdump anyhow. */ - if (rc) - return -ENODEV; - - /* Now try to get the controller to respond to a no-op */ - dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); - for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) { - if (cciss_noop(pdev) == 0) - break; - else - dev_warn(&pdev->dev, "no-op failed%s\n", - (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ? - "; re-trying" : "")); - msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS); - } - return 0; -} - -static int cciss_allocate_cmd_pool(ctlr_info_t *h) -{ - h->cmd_pool_bits = kmalloc(BITS_TO_LONGS(h->nr_cmds) * - sizeof(unsigned long), GFP_KERNEL); - h->cmd_pool = pci_alloc_consistent(h->pdev, - h->nr_cmds * sizeof(CommandList_struct), - &(h->cmd_pool_dhandle)); - h->errinfo_pool = pci_alloc_consistent(h->pdev, - h->nr_cmds * sizeof(ErrorInfo_struct), - &(h->errinfo_pool_dhandle)); - if ((h->cmd_pool_bits == NULL) - || (h->cmd_pool == NULL) - || (h->errinfo_pool == NULL)) { - dev_err(&h->pdev->dev, "out of memory"); - return -ENOMEM; - } - return 0; -} - -static int cciss_allocate_scatterlists(ctlr_info_t *h) -{ - int i; - - /* zero it, so that on free we need not know how many were alloc'ed */ - h->scatter_list = kzalloc(h->max_commands * - sizeof(struct scatterlist *), GFP_KERNEL); - if (!h->scatter_list) - return -ENOMEM; - - for (i = 0; i < h->nr_cmds; i++) { - h->scatter_list[i] = kmalloc(sizeof(struct scatterlist) * - h->maxsgentries, GFP_KERNEL); - if (h->scatter_list[i] == NULL) { - dev_err(&h->pdev->dev, "could not allocate " - "s/g lists\n"); - return -ENOMEM; - } - } - return 0; -} - -static void cciss_free_scatterlists(ctlr_info_t *h) -{ - int i; - - if (h->scatter_list) { - for (i = 0; i < h->nr_cmds; i++) - kfree(h->scatter_list[i]); - kfree(h->scatter_list); - } -} - -static void cciss_free_cmd_pool(ctlr_info_t *h) -{ - kfree(h->cmd_pool_bits); - if (h->cmd_pool) - pci_free_consistent(h->pdev, - h->nr_cmds * sizeof(CommandList_struct), - h->cmd_pool, h->cmd_pool_dhandle); - if (h->errinfo_pool) - pci_free_consistent(h->pdev, - h->nr_cmds * sizeof(ErrorInfo_struct), - h->errinfo_pool, h->errinfo_pool_dhandle); -} - -static int cciss_request_irq(ctlr_info_t *h, - irqreturn_t (*msixhandler)(int, void *), - irqreturn_t (*intxhandler)(int, void *)) -{ - if (h->pdev->msi_enabled || h->pdev->msix_enabled) { - if (!request_irq(h->intr[h->intr_mode], msixhandler, - 0, h->devname, h)) - return 0; - dev_err(&h->pdev->dev, "Unable to get msi irq %d" - " for %s\n", h->intr[h->intr_mode], - h->devname); - return -1; - } - - if (!request_irq(h->intr[h->intr_mode], intxhandler, - IRQF_SHARED, h->devname, h)) - return 0; - dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n", - h->intr[h->intr_mode], h->devname); - return -1; -} - -static int cciss_kdump_soft_reset(ctlr_info_t *h) -{ - if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) { - dev_warn(&h->pdev->dev, "Resetting array controller failed.\n"); - return -EIO; - } - - dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); - if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) { - dev_warn(&h->pdev->dev, "Soft reset had no effect.\n"); - return -1; - } - - dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n"); - if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) { - dev_warn(&h->pdev->dev, "Board failed to become ready " - "after soft reset.\n"); - return -1; - } - - return 0; -} - -static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h) -{ - int ctlr = h->ctlr; - - free_irq(h->intr[h->intr_mode], h); - pci_free_irq_vectors(h->pdev); - cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); - cciss_free_scatterlists(h); - cciss_free_cmd_pool(h); - kfree(h->blockFetchTable); - if (h->reply_pool) - pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64), - h->reply_pool, h->reply_pool_dhandle); - if (h->transtable) - iounmap(h->transtable); - if (h->cfgtable) - iounmap(h->cfgtable); - if (h->vaddr) - iounmap(h->vaddr); - unregister_blkdev(h->major, h->devname); - cciss_destroy_hba_sysfs_entry(h); - pci_release_regions(h->pdev); - kfree(h); - hba[ctlr] = NULL; -} - -/* - * This is it. Find all the controllers and register them. I really hate - * stealing all these major device numbers. - * returns the number of block devices registered. - */ -static int cciss_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int i; - int j = 0; - int rc; - int try_soft_reset = 0; - int dac, return_code; - InquiryData_struct *inq_buff; - ctlr_info_t *h; - unsigned long flags; - - /* - * By default the cciss driver is used for all older HP Smart Array - * controllers. There are module paramaters that allow a user to - * override this behavior and instead use the hpsa SCSI driver. If - * this is the case cciss may be loaded first from the kdump initrd - * image and cause a kernel panic. So if reset_devices is true and - * cciss_allow_hpsa is set just bail. - */ - if ((reset_devices) && (cciss_allow_hpsa == 1)) - return -ENODEV; - rc = cciss_init_reset_devices(pdev); - if (rc) { - if (rc != -ENOTSUPP) - return rc; - /* If the reset fails in a particular way (it has no way to do - * a proper hard reset, so returns -ENOTSUPP) we can try to do - * a soft reset once we get the controller configured up to the - * point that it can accept a command. - */ - try_soft_reset = 1; - rc = 0; - } - -reinit_after_soft_reset: - - i = alloc_cciss_hba(pdev); - if (i < 0) - return -ENOMEM; - - h = hba[i]; - h->pdev = pdev; - h->busy_initializing = 1; - h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; - INIT_LIST_HEAD(&h->cmpQ); - INIT_LIST_HEAD(&h->reqQ); - mutex_init(&h->busy_shutting_down); - - if (cciss_pci_init(h) != 0) - goto clean_no_release_regions; - - sprintf(h->devname, "cciss%d", i); - h->ctlr = i; - - if (cciss_tape_cmds < 2) - cciss_tape_cmds = 2; - if (cciss_tape_cmds > 16) - cciss_tape_cmds = 16; - - init_completion(&h->scan_wait); - - if (cciss_create_hba_sysfs_entry(h)) - goto clean0; - - /* configure PCI DMA stuff */ - if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) - dac = 1; - else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) - dac = 0; - else { - dev_err(&h->pdev->dev, "no suitable DMA available\n"); - goto clean1; - } - - /* - * register with the major number, or get a dynamic major number - * by passing 0 as argument. This is done for greater than - * 8 controller support. - */ - if (i < MAX_CTLR_ORIG) - h->major = COMPAQ_CISS_MAJOR + i; - rc = register_blkdev(h->major, h->devname); - if (rc == -EBUSY || rc == -EINVAL) { - dev_err(&h->pdev->dev, - "Unable to get major number %d for %s " - "on hba %d\n", h->major, h->devname, i); - goto clean1; - } else { - if (i >= MAX_CTLR_ORIG) - h->major = rc; - } - - /* make sure the board interrupts are off */ - h->access.set_intr_mask(h, CCISS_INTR_OFF); - rc = cciss_request_irq(h, do_cciss_msix_intr, do_cciss_intx); - if (rc) - goto clean2; - - dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", - h->devname, pdev->device, pci_name(pdev), - h->intr[h->intr_mode], dac ? "" : " not"); - - if (cciss_allocate_cmd_pool(h)) - goto clean4; - - if (cciss_allocate_scatterlists(h)) - goto clean4; - - h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h, - h->chainsize, h->nr_cmds); - if (!h->cmd_sg_list && h->chainsize > 0) - goto clean4; - - spin_lock_init(&h->lock); - - /* Initialize the pdev driver private data. - have it point to h. */ - pci_set_drvdata(pdev, h); - /* command and error info recs zeroed out before - they are used */ - bitmap_zero(h->cmd_pool_bits, h->nr_cmds); - - h->num_luns = 0; - h->highest_lun = -1; - for (j = 0; j < CISS_MAX_LUN; j++) { - h->drv[j] = NULL; - h->gendisk[j] = NULL; - } - - /* At this point, the controller is ready to take commands. - * Now, if reset_devices and the hard reset didn't work, try - * the soft reset and see if that works. - */ - if (try_soft_reset) { - - /* This is kind of gross. We may or may not get a completion - * from the soft reset command, and if we do, then the value - * from the fifo may or may not be valid. So, we wait 10 secs - * after the reset throwing away any completions we get during - * that time. Unregister the interrupt handler and register - * fake ones to scoop up any residual completions. - */ - spin_lock_irqsave(&h->lock, flags); - h->access.set_intr_mask(h, CCISS_INTR_OFF); - spin_unlock_irqrestore(&h->lock, flags); - free_irq(h->intr[h->intr_mode], h); - rc = cciss_request_irq(h, cciss_msix_discard_completions, - cciss_intx_discard_completions); - if (rc) { - dev_warn(&h->pdev->dev, "Failed to request_irq after " - "soft reset.\n"); - goto clean4; - } - - rc = cciss_kdump_soft_reset(h); - if (rc) { - dev_warn(&h->pdev->dev, "Soft reset failed.\n"); - goto clean4; - } - - dev_info(&h->pdev->dev, "Board READY.\n"); - dev_info(&h->pdev->dev, - "Waiting for stale completions to drain.\n"); - h->access.set_intr_mask(h, CCISS_INTR_ON); - msleep(10000); - h->access.set_intr_mask(h, CCISS_INTR_OFF); - - rc = controller_reset_failed(h->cfgtable); - if (rc) - dev_info(&h->pdev->dev, - "Soft reset appears to have failed.\n"); - - /* since the controller's reset, we have to go back and re-init - * everything. Easiest to just forget what we've done and do it - * all over again. - */ - cciss_undo_allocations_after_kdump_soft_reset(h); - try_soft_reset = 0; - if (rc) - /* don't go to clean4, we already unallocated */ - return -ENODEV; - - goto reinit_after_soft_reset; - } - - cciss_scsi_setup(h); - - /* Turn the interrupts on so we can service requests */ - h->access.set_intr_mask(h, CCISS_INTR_ON); - - /* Get the firmware version */ - inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - dev_err(&h->pdev->dev, "out of memory\n"); - goto clean4; - } - - return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff, - sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD); - if (return_code == IO_OK) { - h->firm_ver[0] = inq_buff->data_byte[32]; - h->firm_ver[1] = inq_buff->data_byte[33]; - h->firm_ver[2] = inq_buff->data_byte[34]; - h->firm_ver[3] = inq_buff->data_byte[35]; - } else { /* send command failed */ - dev_warn(&h->pdev->dev, "unable to determine firmware" - " version of controller\n"); - } - kfree(inq_buff); - - cciss_procinit(h); - - h->cciss_max_sectors = 8192; - - rebuild_lun_table(h, 1, 0); - cciss_engage_scsi(h); - h->busy_initializing = 0; - return 0; - -clean4: - cciss_free_cmd_pool(h); - cciss_free_scatterlists(h); - cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); - free_irq(h->intr[h->intr_mode], h); -clean2: - unregister_blkdev(h->major, h->devname); -clean1: - cciss_destroy_hba_sysfs_entry(h); -clean0: - pci_release_regions(pdev); -clean_no_release_regions: - h->busy_initializing = 0; - - /* - * Deliberately omit pci_disable_device(): it does something nasty to - * Smart Array controllers that pci_enable_device does not undo - */ - pci_set_drvdata(pdev, NULL); - free_hba(h); - return -ENODEV; -} - -static void cciss_shutdown(struct pci_dev *pdev) -{ - ctlr_info_t *h; - char *flush_buf; - int return_code; - - h = pci_get_drvdata(pdev); - flush_buf = kzalloc(4, GFP_KERNEL); - if (!flush_buf) { - dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n"); - return; - } - /* write all data in the battery backed cache to disk */ - return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf, - 4, 0, CTLR_LUNID, TYPE_CMD); - kfree(flush_buf); - if (return_code != IO_OK) - dev_warn(&h->pdev->dev, "Error flushing cache\n"); - h->access.set_intr_mask(h, CCISS_INTR_OFF); - free_irq(h->intr[h->intr_mode], h); -} - -static int cciss_enter_simple_mode(struct ctlr_info *h) -{ - u32 trans_support; - - trans_support = readl(&(h->cfgtable->TransportSupport)); - if (!(trans_support & SIMPLE_MODE)) - return -ENOTSUPP; - - h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); - writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - cciss_wait_for_mode_change_ack(h); - print_cfg_table(h); - if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { - dev_warn(&h->pdev->dev, "unable to get board into simple mode\n"); - return -ENODEV; - } - h->transMethod = CFGTBL_Trans_Simple; - return 0; -} - - -static void cciss_remove_one(struct pci_dev *pdev) -{ - ctlr_info_t *h; - int i, j; - - if (pci_get_drvdata(pdev) == NULL) { - dev_err(&pdev->dev, "Unable to remove device\n"); - return; - } - - h = pci_get_drvdata(pdev); - i = h->ctlr; - if (hba[i] == NULL) { - dev_err(&pdev->dev, "device appears to already be removed\n"); - return; - } - - mutex_lock(&h->busy_shutting_down); - - remove_from_scan_list(h); - remove_proc_entry(h->devname, proc_cciss); - unregister_blkdev(h->major, h->devname); - - /* remove it from the disk list */ - for (j = 0; j < CISS_MAX_LUN; j++) { - struct gendisk *disk = h->gendisk[j]; - if (disk) { - struct request_queue *q = disk->queue; - - if (disk->flags & GENHD_FL_UP) { - cciss_destroy_ld_sysfs_entry(h, j, 1); - del_gendisk(disk); - } - if (q) - blk_cleanup_queue(q); - } - } - -#ifdef CONFIG_CISS_SCSI_TAPE - cciss_unregister_scsi(h); /* unhook from SCSI subsystem */ -#endif - - cciss_shutdown(pdev); - - pci_free_irq_vectors(h->pdev); - - iounmap(h->transtable); - iounmap(h->cfgtable); - iounmap(h->vaddr); - - cciss_free_cmd_pool(h); - /* Free up sg elements */ - for (j = 0; j < h->nr_cmds; j++) - kfree(h->scatter_list[j]); - kfree(h->scatter_list); - cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); - kfree(h->blockFetchTable); - if (h->reply_pool) - pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64), - h->reply_pool, h->reply_pool_dhandle); - /* - * Deliberately omit pci_disable_device(): it does something nasty to - * Smart Array controllers that pci_enable_device does not undo - */ - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - cciss_destroy_hba_sysfs_entry(h); - mutex_unlock(&h->busy_shutting_down); - free_hba(h); -} - -static struct pci_driver cciss_pci_driver = { - .name = "cciss", - .probe = cciss_init_one, - .remove = cciss_remove_one, - .id_table = cciss_pci_device_id, /* id_table */ - .shutdown = cciss_shutdown, -}; - -/* - * This is it. Register the PCI driver information for the cards we control - * the OS will call our registered routines when it finds one of our cards. - */ -static int __init cciss_init(void) -{ - int err; - - /* - * The hardware requires that commands are aligned on a 64-bit - * boundary. Given that we use pci_alloc_consistent() to allocate an - * array of them, the size must be a multiple of 8 bytes. - */ - BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT); - printk(KERN_INFO DRIVER_NAME "\n"); - - err = bus_register(&cciss_bus_type); - if (err) - return err; - - /* Start the scan thread */ - cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan"); - if (IS_ERR(cciss_scan_thread)) { - err = PTR_ERR(cciss_scan_thread); - goto err_bus_unregister; - } - - /* Register for our PCI devices */ - err = pci_register_driver(&cciss_pci_driver); - if (err) - goto err_thread_stop; - - return err; - -err_thread_stop: - kthread_stop(cciss_scan_thread); -err_bus_unregister: - bus_unregister(&cciss_bus_type); - - return err; -} - -static void __exit cciss_cleanup(void) -{ - int i; - - pci_unregister_driver(&cciss_pci_driver); - /* double check that all controller entrys have been removed */ - for (i = 0; i < MAX_CTLR; i++) { - if (hba[i] != NULL) { - dev_warn(&hba[i]->pdev->dev, - "had to remove controller\n"); - cciss_remove_one(hba[i]->pdev); - } - } - kthread_stop(cciss_scan_thread); - if (proc_cciss) - remove_proc_entry("driver/cciss", NULL); - bus_unregister(&cciss_bus_type); -} - -module_init(cciss_init); -module_exit(cciss_cleanup); diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h deleted file mode 100644 index 24b5fd75501a..000000000000 --- a/drivers/block/cciss.h +++ /dev/null @@ -1,433 +0,0 @@ -#ifndef CCISS_H -#define CCISS_H - -#include -#include - -#include "cciss_cmd.h" - - -#define NWD_SHIFT 4 -#define MAX_PART (1 << NWD_SHIFT) - -#define IO_OK 0 -#define IO_ERROR 1 -#define IO_NEEDS_RETRY 3 - -#define VENDOR_LEN 8 -#define MODEL_LEN 16 -#define REV_LEN 4 - -struct ctlr_info; -typedef struct ctlr_info ctlr_info_t; - -struct access_method { - void (*submit_command)(ctlr_info_t *h, CommandList_struct *c); - void (*set_intr_mask)(ctlr_info_t *h, unsigned long val); - unsigned long (*fifo_full)(ctlr_info_t *h); - bool (*intr_pending)(ctlr_info_t *h); - unsigned long (*command_completed)(ctlr_info_t *h); -}; -typedef struct _drive_info_struct -{ - unsigned char LunID[8]; - int usage_count; - struct request_queue *queue; - sector_t nr_blocks; - int block_size; - int heads; - int sectors; - int cylinders; - int raid_level; /* set to -1 to indicate that - * the drive is not in use/configured - */ - int busy_configuring; /* This is set when a drive is being removed - * to prevent it from being opened or it's - * queue from being started. - */ - struct device dev; - __u8 serial_no[16]; /* from inquiry page 0x83, - * not necc. null terminated. - */ - char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */ - char model[MODEL_LEN + 1]; /* SCSI model string */ - char rev[REV_LEN + 1]; /* SCSI revision string */ - char device_initialized; /* indicates whether dev is initialized */ -} drive_info_struct; - -struct ctlr_info -{ - int ctlr; - char devname[8]; - char *product_name; - char firm_ver[4]; /* Firmware version */ - struct pci_dev *pdev; - __u32 board_id; - void __iomem *vaddr; - unsigned long paddr; - int nr_cmds; /* Number of commands allowed on this controller */ - CfgTable_struct __iomem *cfgtable; - int interrupts_enabled; - int major; - int max_commands; - int commands_outstanding; - int max_outstanding; /* Debug */ - int num_luns; - int highest_lun; - int usage_count; /* number of opens all all minor devices */ - /* Need space for temp sg list - * number of scatter/gathers supported - * number of scatter/gathers in chained block - */ - struct scatterlist **scatter_list; - int maxsgentries; - int chainsize; - int max_cmd_sgentries; - SGDescriptor_struct **cmd_sg_list; - -# define PERF_MODE_INT 0 -# define DOORBELL_INT 1 -# define SIMPLE_MODE_INT 2 -# define MEMQ_MODE_INT 3 - unsigned int intr[4]; - int intr_mode; - int cciss_max_sectors; - BYTE cciss_read; - BYTE cciss_write; - BYTE cciss_read_capacity; - - /* information about each logical volume */ - drive_info_struct *drv[CISS_MAX_LUN]; - - struct access_method access; - - /* queue and queue Info */ - struct list_head reqQ; - struct list_head cmpQ; - unsigned int Qdepth; - unsigned int maxQsinceinit; - unsigned int maxSG; - spinlock_t lock; - - /* pointers to command and error info pool */ - CommandList_struct *cmd_pool; - dma_addr_t cmd_pool_dhandle; - ErrorInfo_struct *errinfo_pool; - dma_addr_t errinfo_pool_dhandle; - unsigned long *cmd_pool_bits; - int nr_allocs; - int nr_frees; - int busy_configuring; - int busy_initializing; - int busy_scanning; - struct mutex busy_shutting_down; - - /* This element holds the zero based queue number of the last - * queue to be started. It is used for fairness. - */ - int next_to_run; - - /* Disk structures we need to pass back */ - struct gendisk *gendisk[CISS_MAX_LUN]; -#ifdef CONFIG_CISS_SCSI_TAPE - struct cciss_scsi_adapter_data_t *scsi_ctlr; -#endif - unsigned char alive; - struct list_head scan_list; - struct completion scan_wait; - struct device dev; - /* - * Performant mode tables. - */ - u32 trans_support; - u32 trans_offset; - struct TransTable_struct *transtable; - unsigned long transMethod; - - /* - * Performant mode completion buffer - */ - u64 *reply_pool; - dma_addr_t reply_pool_dhandle; - u64 *reply_pool_head; - size_t reply_pool_size; - unsigned char reply_pool_wraparound; - u32 *blockFetchTable; -}; - -/* Defining the diffent access_methods - * - * Memory mapped FIFO interface (SMART 53xx cards) - */ -#define SA5_DOORBELL 0x20 -#define SA5_REQUEST_PORT_OFFSET 0x40 -#define SA5_REPLY_INTR_MASK_OFFSET 0x34 -#define SA5_REPLY_PORT_OFFSET 0x44 -#define SA5_INTR_STATUS 0x30 -#define SA5_SCRATCHPAD_OFFSET 0xB0 - -#define SA5_CTCFG_OFFSET 0xB4 -#define SA5_CTMEM_OFFSET 0xB8 - -#define SA5_INTR_OFF 0x08 -#define SA5B_INTR_OFF 0x04 -#define SA5_INTR_PENDING 0x08 -#define SA5B_INTR_PENDING 0x04 -#define FIFO_EMPTY 0xffffffff -#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ -/* Perf. mode flags */ -#define SA5_PERF_INTR_PENDING 0x04 -#define SA5_PERF_INTR_OFF 0x05 -#define SA5_OUTDB_STATUS_PERF_BIT 0x01 -#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 -#define SA5_OUTDB_CLEAR 0xA0 -#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 -#define SA5_OUTDB_STATUS 0x9C - - -#define CISS_ERROR_BIT 0x02 - -#define CCISS_INTR_ON 1 -#define CCISS_INTR_OFF 0 - - -/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board - * to become ready, in seconds, before giving up on it. - * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait - * between polling the board to see if it is ready, in - * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived - * the above. - */ -#define CCISS_BOARD_READY_WAIT_SECS (120) -#define CCISS_BOARD_NOT_READY_WAIT_SECS (100) -#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100) -#define CCISS_BOARD_READY_ITERATIONS \ - ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \ - CCISS_BOARD_READY_POLL_INTERVAL_MSECS) -#define CCISS_BOARD_NOT_READY_ITERATIONS \ - ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \ - CCISS_BOARD_READY_POLL_INTERVAL_MSECS) -#define CCISS_POST_RESET_PAUSE_MSECS (3000) -#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000) -#define CCISS_POST_RESET_NOOP_RETRIES (12) -#define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000) - -/* - Send the command to the hardware -*/ -static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) -{ -#ifdef CCISS_DEBUG - printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n", - h->ctlr, c->busaddr); -#endif /* CCISS_DEBUG */ - writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); - readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); - h->commands_outstanding++; - if ( h->commands_outstanding > h->max_outstanding) - h->max_outstanding = h->commands_outstanding; -} - -/* - * This card is the opposite of the other cards. - * 0 turns interrupts on... - * 0x08 turns them off... - */ -static void SA5_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) - { /* Turn interrupts on */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else /* Turn them off */ - { - h->interrupts_enabled = 0; - writel( SA5_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} -/* - * This card is the opposite of the other cards. - * 0 turns interrupts on... - * 0x04 turns them off... - */ -static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) - { /* Turn interrupts on */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else /* Turn them off */ - { - h->interrupts_enabled = 0; - writel( SA5B_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} - -/* Performant mode intr_mask */ -static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) { /* turn on interrupts */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else { - h->interrupts_enabled = 0; - writel(SA5_PERF_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} - -/* - * Returns true if fifo is full. - * - */ -static unsigned long SA5_fifo_full(ctlr_info_t *h) -{ - if( h->commands_outstanding >= h->max_commands) - return(1); - else - return(0); - -} -/* - * returns value read from hardware. - * returns FIFO_EMPTY if there is nothing to read - */ -static unsigned long SA5_completed(ctlr_info_t *h) -{ - unsigned long register_value - = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); - if(register_value != FIFO_EMPTY) - { - h->commands_outstanding--; -#ifdef CCISS_DEBUG - printk("cciss: Read %lx back from board\n", register_value); -#endif /* CCISS_DEBUG */ - } -#ifdef CCISS_DEBUG - else - { - printk("cciss: FIFO Empty read\n"); - } -#endif - return ( register_value); - -} - -/* Performant mode command completed */ -static unsigned long SA5_performant_completed(ctlr_info_t *h) -{ - unsigned long register_value = FIFO_EMPTY; - - /* flush the controller write of the reply queue by reading - * outbound doorbell status register. - */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - /* msi auto clears the interrupt pending bit. */ - if (!(h->pdev->msi_enabled || h->pdev->msix_enabled)) { - writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); - /* Do a read in order to flush the write to the controller - * (as per spec.) - */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - } - - if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { - register_value = *(h->reply_pool_head); - (h->reply_pool_head)++; - h->commands_outstanding--; - } else { - register_value = FIFO_EMPTY; - } - /* Check for wraparound */ - if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { - h->reply_pool_head = h->reply_pool; - h->reply_pool_wraparound ^= 1; - } - - return register_value; -} -/* - * Returns true if an interrupt is pending.. - */ -static bool SA5_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = - readl(h->vaddr + SA5_INTR_STATUS); -#ifdef CCISS_DEBUG - printk("cciss: intr_pending %lx\n", register_value); -#endif /* CCISS_DEBUG */ - if( register_value & SA5_INTR_PENDING) - return 1; - return 0 ; -} - -/* - * Returns true if an interrupt is pending.. - */ -static bool SA5B_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = - readl(h->vaddr + SA5_INTR_STATUS); -#ifdef CCISS_DEBUG - printk("cciss: intr_pending %lx\n", register_value); -#endif /* CCISS_DEBUG */ - if( register_value & SA5B_INTR_PENDING) - return 1; - return 0 ; -} - -static bool SA5_performant_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); - - if (!register_value) - return false; - - if (h->pdev->msi_enabled || h->pdev->msix_enabled) - return true; - - /* Read outbound doorbell to flush */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - return register_value & SA5_OUTDB_STATUS_PERF_BIT; -} - -static struct access_method SA5_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5_intr_pending, - .command_completed = SA5_completed, -}; - -static struct access_method SA5B_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5B_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5B_intr_pending, - .command_completed = SA5_completed, -}; - -static struct access_method SA5_performant_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5_performant_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5_performant_intr_pending, - .command_completed = SA5_performant_completed, -}; - -struct board_type { - __u32 board_id; - char *product_name; - struct access_method *access; - int nr_cmds; /* Max cmds this kind of ctlr can handle. */ -}; - -#endif /* CCISS_H */ diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h deleted file mode 100644 index d9be6b4d49a6..000000000000 --- a/drivers/block/cciss_cmd.h +++ /dev/null @@ -1,269 +0,0 @@ -#ifndef CCISS_CMD_H -#define CCISS_CMD_H - -#include - -/* DEFINES */ -#define CISS_VERSION "1.00" - -/* general boundary definitions */ -#define MAXSGENTRIES 32 -#define CCISS_SG_CHAIN 0x80000000 -#define MAXREPLYQS 256 - -/* Unit Attentions ASC's as defined for the MSA2012sa */ -#define POWER_OR_RESET 0x29 -#define STATE_CHANGED 0x2a -#define UNIT_ATTENTION_CLEARED 0x2f -#define LUN_FAILED 0x3e -#define REPORT_LUNS_CHANGED 0x3f - -/* Unit Attentions ASCQ's as defined for the MSA2012sa */ - - /* These ASCQ's defined for ASC = POWER_OR_RESET */ -#define POWER_ON_RESET 0x00 -#define POWER_ON_REBOOT 0x01 -#define SCSI_BUS_RESET 0x02 -#define MSA_TARGET_RESET 0x03 -#define CONTROLLER_FAILOVER 0x04 -#define TRANSCEIVER_SE 0x05 -#define TRANSCEIVER_LVD 0x06 - - /* These ASCQ's defined for ASC = STATE_CHANGED */ -#define RESERVATION_PREEMPTED 0x03 -#define ASYM_ACCESS_CHANGED 0x06 -#define LUN_CAPACITY_CHANGED 0x09 - -/* config space register offsets */ -#define CFG_VENDORID 0x00 -#define CFG_DEVICEID 0x02 -#define CFG_I2OBAR 0x10 -#define CFG_MEM1BAR 0x14 - -/* i2o space register offsets */ -#define I2O_IBDB_SET 0x20 -#define I2O_IBDB_CLEAR 0x70 -#define I2O_INT_STATUS 0x30 -#define I2O_INT_MASK 0x34 -#define I2O_IBPOST_Q 0x40 -#define I2O_OBPOST_Q 0x44 -#define I2O_DMA1_CFG 0x214 - -/* Configuration Table */ -#define CFGTBL_ChangeReq 0x00000001l -#define CFGTBL_AccCmds 0x00000001l -#define DOORBELL_CTLR_RESET 0x00000004l -#define DOORBELL_CTLR_RESET2 0x00000020l - -#define CFGTBL_Trans_Simple 0x00000002l -#define CFGTBL_Trans_Performant 0x00000004l -#define CFGTBL_Trans_use_short_tags 0x20000000l - -#define CFGTBL_BusType_Ultra2 0x00000001l -#define CFGTBL_BusType_Ultra3 0x00000002l -#define CFGTBL_BusType_Fibre1G 0x00000100l -#define CFGTBL_BusType_Fibre2G 0x00000200l -typedef struct _vals32 -{ - __u32 lower; - __u32 upper; -} vals32; - -typedef union _u64bit -{ - vals32 val32; - __u64 val; -} u64bit; - -/* Type defs used in the following structs */ -#define QWORD vals32 - -/* STRUCTURES */ -#define CISS_MAX_PHYS_LUN 1024 -/* SCSI-3 Cmmands */ - -#pragma pack(1) - -#define CISS_INQUIRY 0x12 -/* Date returned */ -typedef struct _InquiryData_struct -{ - BYTE data_byte[36]; -} InquiryData_struct; - -#define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */ -#define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */ -/* Data returned */ -typedef struct _ReportLUNdata_struct -{ - BYTE LUNListLength[4]; - DWORD reserved; - BYTE LUN[CISS_MAX_LUN][8]; -} ReportLunData_struct; - -#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */ -typedef struct _ReadCapdata_struct -{ - BYTE total_size[4]; /* Total size in blocks */ - BYTE block_size[4]; /* Size of blocks in bytes */ -} ReadCapdata_struct; - -#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */ - -/* service action to differentiate a 16 byte read capacity from - other commands that use the 0x9e SCSI op code */ - -#define CCISS_READ_CAPACITY_16_SERVICE_ACT 0x10 - -typedef struct _ReadCapdata_struct_16 -{ - BYTE total_size[8]; /* Total size in blocks */ - BYTE block_size[4]; /* Size of blocks in bytes */ - BYTE prot_en:1; /* protection enable bit */ - BYTE rto_en:1; /* reference tag own enable bit */ - BYTE reserved:6; /* reserved bits */ - BYTE reserved2[18]; /* reserved bytes per spec */ -} ReadCapdata_struct_16; - -/* Define the supported read/write commands for cciss based controllers */ - -#define CCISS_READ_10 0x28 /* Read(10) */ -#define CCISS_WRITE_10 0x2a /* Write(10) */ -#define CCISS_READ_16 0x88 /* Read(16) */ -#define CCISS_WRITE_16 0x8a /* Write(16) */ - -/* Define the CDB lengths supported by cciss based controllers */ - -#define CDB_LEN10 10 -#define CDB_LEN16 16 - -/* BMIC commands */ -#define BMIC_READ 0x26 -#define BMIC_WRITE 0x27 -#define BMIC_CACHE_FLUSH 0xc2 -#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */ - -#define CCISS_ABORT_MSG 0x00 -#define CCISS_RESET_MSG 0x01 -#define CCISS_RESET_TYPE_CONTROLLER 0x00 -#define CCISS_RESET_TYPE_BUS 0x01 -#define CCISS_RESET_TYPE_TARGET 0x03 -#define CCISS_RESET_TYPE_LUN 0x04 -#define CCISS_NOOP_MSG 0x03 - -/* Command List Structure */ -#define CTLR_LUNID "\0\0\0\0\0\0\0\0" - -typedef struct _CommandListHeader_struct { - BYTE ReplyQueue; - BYTE SGList; - HWORD SGTotal; - QWORD Tag; - LUNAddr_struct LUN; -} CommandListHeader_struct; -typedef struct _ErrDescriptor_struct { - QWORD Addr; - DWORD Len; -} ErrDescriptor_struct; -typedef struct _SGDescriptor_struct { - QWORD Addr; - DWORD Len; - DWORD Ext; -} SGDescriptor_struct; - -/* Command types */ -#define CMD_RWREQ 0x00 -#define CMD_IOCTL_PEND 0x01 -#define CMD_SCSI 0x03 -#define CMD_MSG_DONE 0x04 -#define CMD_MSG_TIMEOUT 0x05 -#define CMD_MSG_STALE 0xff - -/* This structure needs to be divisible by COMMANDLIST_ALIGNMENT - * because low bits of the address are used to to indicate that - * whether the tag contains an index or an address. PAD_32 and - * PAD_64 can be adjusted independently as needed for 32-bit - * and 64-bits systems. - */ -#define COMMANDLIST_ALIGNMENT (32) -#define IS_64_BIT ((sizeof(long) - 4)/4) -#define IS_32_BIT (!IS_64_BIT) -#define PAD_32 (0) -#define PAD_64 (4) -#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64) -#define DIRECT_LOOKUP_BIT 0x10 -#define DIRECT_LOOKUP_SHIFT 5 - -typedef struct _CommandList_struct { - CommandListHeader_struct Header; - RequestBlock_struct Request; - ErrDescriptor_struct ErrDesc; - SGDescriptor_struct SG[MAXSGENTRIES]; - /* information associated with the command */ - __u32 busaddr; /* physical address of this record */ - ErrorInfo_struct * err_info; /* pointer to the allocated mem */ - int ctlr; - int cmd_type; - long cmdindex; - struct list_head list; - struct request * rq; - struct completion *waiting; - int retry_count; - void * scsi_cmd; - char pad[PADSIZE]; -} CommandList_struct; - -/* Configuration Table Structure */ -typedef struct _HostWrite_struct { - DWORD TransportRequest; - DWORD Reserved; - DWORD CoalIntDelay; - DWORD CoalIntCount; -} HostWrite_struct; - -typedef struct _CfgTable_struct { - BYTE Signature[4]; - DWORD SpecValence; -#define SIMPLE_MODE 0x02 -#define PERFORMANT_MODE 0x04 -#define MEMQ_MODE 0x08 - DWORD TransportSupport; - DWORD TransportActive; - HostWrite_struct HostWrite; - DWORD CmdsOutMax; - DWORD BusTypes; - DWORD TransMethodOffset; - BYTE ServerName[16]; - DWORD HeartBeat; - DWORD SCSI_Prefetch; - DWORD MaxSGElements; - DWORD MaxLogicalUnits; - DWORD MaxPhysicalDrives; - DWORD MaxPhysicalDrivesPerLogicalUnit; - DWORD MaxPerformantModeCommands; - u8 reserved[0x78 - 0x58]; - u32 misc_fw_support; /* offset 0x78 */ -#define MISC_FW_DOORBELL_RESET (0x02) -#define MISC_FW_DOORBELL_RESET2 (0x10) - u8 driver_version[32]; -} CfgTable_struct; - -struct TransTable_struct { - u32 BlockFetch0; - u32 BlockFetch1; - u32 BlockFetch2; - u32 BlockFetch3; - u32 BlockFetch4; - u32 BlockFetch5; - u32 BlockFetch6; - u32 BlockFetch7; - u32 RepQSize; - u32 RepQCount; - u32 RepQCtrAddrLow32; - u32 RepQCtrAddrHigh32; - u32 RepQAddr0Low32; - u32 RepQAddr0High32; -}; - -#pragma pack() -#endif /* CCISS_CMD_H */ diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c deleted file mode 100644 index 01a1f7e24978..000000000000 --- a/drivers/block/cciss_scsi.c +++ /dev/null @@ -1,1653 +0,0 @@ -/* - * Disk Array driver for HP Smart Array controllers, SCSI Tape module. - * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA - * 02111-1307, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * - * Author: Stephen M. Cameron - */ -#ifdef CONFIG_CISS_SCSI_TAPE - -/* Here we have code to present the driver as a scsi driver - as it is simultaneously presented as a block driver. The - reason for doing this is to allow access to SCSI tape drives - through the array controller. Note in particular, neither - physical nor logical disks are presented through the scsi layer. */ - -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include "cciss_scsi.h" - -#define CCISS_ABORT_MSG 0x00 -#define CCISS_RESET_MSG 0x01 - -static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, - size_t size, - __u8 page_code, unsigned char *scsi3addr, - int cmd_type); - -static CommandList_struct *cmd_alloc(ctlr_info_t *h); -static CommandList_struct *cmd_special_alloc(ctlr_info_t *h); -static void cmd_free(ctlr_info_t *h, CommandList_struct *c); -static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c); - -static int cciss_scsi_write_info(struct Scsi_Host *sh, - char *buffer, /* data buffer */ - int length); /* length of data in buffer */ -static int cciss_scsi_show_info(struct seq_file *m, - struct Scsi_Host *sh); - -static int cciss_scsi_queue_command (struct Scsi_Host *h, - struct scsi_cmnd *cmd); -static int cciss_eh_device_reset_handler(struct scsi_cmnd *); -static int cciss_eh_abort_handler(struct scsi_cmnd *); - -static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = { - { .name = "cciss0", .ndevices = 0 }, - { .name = "cciss1", .ndevices = 0 }, - { .name = "cciss2", .ndevices = 0 }, - { .name = "cciss3", .ndevices = 0 }, - { .name = "cciss4", .ndevices = 0 }, - { .name = "cciss5", .ndevices = 0 }, - { .name = "cciss6", .ndevices = 0 }, - { .name = "cciss7", .ndevices = 0 }, -}; - -static struct scsi_host_template cciss_driver_template = { - .module = THIS_MODULE, - .name = "cciss", - .proc_name = "cciss", - .write_info = cciss_scsi_write_info, - .show_info = cciss_scsi_show_info, - .queuecommand = cciss_scsi_queue_command, - .this_id = 7, - .use_clustering = DISABLE_CLUSTERING, - /* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */ - .eh_device_reset_handler= cciss_eh_device_reset_handler, - .eh_abort_handler = cciss_eh_abort_handler, -}; - -#pragma pack(1) - -#define SCSI_PAD_32 8 -#define SCSI_PAD_64 8 - -struct cciss_scsi_cmd_stack_elem_t { - CommandList_struct cmd; - ErrorInfo_struct Err; - __u32 busaddr; - int cmdindex; - u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64]; -}; - -#pragma pack() - -#pragma pack(1) -struct cciss_scsi_cmd_stack_t { - struct cciss_scsi_cmd_stack_elem_t *pool; - struct cciss_scsi_cmd_stack_elem_t **elem; - dma_addr_t cmd_pool_handle; - int top; - int nelems; -}; -#pragma pack() - -struct cciss_scsi_adapter_data_t { - struct Scsi_Host *scsi_host; - struct cciss_scsi_cmd_stack_t cmd_stack; - SGDescriptor_struct **cmd_sg_list; - int registered; - spinlock_t lock; // to protect ccissscsi[ctlr]; -}; - -#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \ - &h->scsi_ctlr->lock, flags); -#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \ - &h->scsi_ctlr->lock, flags); - -static CommandList_struct * -scsi_cmd_alloc(ctlr_info_t *h) -{ - /* assume only one process in here at a time, locking done by caller. */ - /* use h->lock */ - /* might be better to rewrite how we allocate scsi commands in a way that */ - /* needs no locking at all. */ - - /* take the top memory chunk off the stack and return it, if any. */ - struct cciss_scsi_cmd_stack_elem_t *c; - struct cciss_scsi_adapter_data_t *sa; - struct cciss_scsi_cmd_stack_t *stk; - u64bit temp64; - - sa = h->scsi_ctlr; - stk = &sa->cmd_stack; - - if (stk->top < 0) - return NULL; - c = stk->elem[stk->top]; - /* memset(c, 0, sizeof(*c)); */ - memset(&c->cmd, 0, sizeof(c->cmd)); - memset(&c->Err, 0, sizeof(c->Err)); - /* set physical addr of cmd and addr of scsi parameters */ - c->cmd.busaddr = c->busaddr; - c->cmd.cmdindex = c->cmdindex; - /* (__u32) (stk->cmd_pool_handle + - (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */ - - temp64.val = (__u64) (c->busaddr + sizeof(CommandList_struct)); - /* (__u64) (stk->cmd_pool_handle + - (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top) + - sizeof(CommandList_struct)); */ - stk->top--; - c->cmd.ErrDesc.Addr.lower = temp64.val32.lower; - c->cmd.ErrDesc.Addr.upper = temp64.val32.upper; - c->cmd.ErrDesc.Len = sizeof(ErrorInfo_struct); - - c->cmd.ctlr = h->ctlr; - c->cmd.err_info = &c->Err; - - return (CommandList_struct *) c; -} - -static void -scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c) -{ - /* assume only one process in here at a time, locking done by caller. */ - /* use h->lock */ - /* drop the free memory chunk on top of the stack. */ - - struct cciss_scsi_adapter_data_t *sa; - struct cciss_scsi_cmd_stack_t *stk; - - sa = h->scsi_ctlr; - stk = &sa->cmd_stack; - stk->top++; - if (stk->top >= stk->nelems) { - dev_err(&h->pdev->dev, - "scsi_cmd_free called too many times.\n"); - BUG(); - } - stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c; -} - -static int -scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa) -{ - int i; - struct cciss_scsi_cmd_stack_t *stk; - size_t size; - - stk = &sa->cmd_stack; - stk->nelems = cciss_tape_cmds + 2; - sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h, - h->chainsize, stk->nelems); - if (!sa->cmd_sg_list && h->chainsize > 0) - return -ENOMEM; - - size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems; - - /* Check alignment, see cciss_cmd.h near CommandList_struct def. */ - BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0); - /* pci_alloc_consistent guarantees 32-bit DMA address will be used */ - stk->pool = (struct cciss_scsi_cmd_stack_elem_t *) - pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle); - - if (stk->pool == NULL) { - cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems); - sa->cmd_sg_list = NULL; - return -ENOMEM; - } - stk->elem = kmalloc(sizeof(stk->elem[0]) * stk->nelems, GFP_KERNEL); - if (!stk->elem) { - pci_free_consistent(h->pdev, size, stk->pool, - stk->cmd_pool_handle); - return -1; - } - for (i = 0; i < stk->nelems; i++) { - stk->elem[i] = &stk->pool[i]; - stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle + - (sizeof(struct cciss_scsi_cmd_stack_elem_t) * i)); - stk->elem[i]->cmdindex = i; - } - stk->top = stk->nelems-1; - return 0; -} - -static void -scsi_cmd_stack_free(ctlr_info_t *h) -{ - struct cciss_scsi_adapter_data_t *sa; - struct cciss_scsi_cmd_stack_t *stk; - size_t size; - - sa = h->scsi_ctlr; - stk = &sa->cmd_stack; - if (stk->top != stk->nelems-1) { - dev_warn(&h->pdev->dev, - "bug: %d scsi commands are still outstanding.\n", - stk->nelems - stk->top); - } - size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems; - - pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle); - stk->pool = NULL; - cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems); - kfree(stk->elem); - stk->elem = NULL; -} - -#if 0 -static void -print_cmd(CommandList_struct *cp) -{ - printk("queue:%d\n", cp->Header.ReplyQueue); - printk("sglist:%d\n", cp->Header.SGList); - printk("sgtot:%d\n", cp->Header.SGTotal); - printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper, - cp->Header.Tag.lower); - printk("LUN:0x%8phN\n", cp->Header.LUN.LunAddrBytes); - printk("CDBLen:%d\n", cp->Request.CDBLen); - printk("Type:%d\n",cp->Request.Type.Type); - printk("Attr:%d\n",cp->Request.Type.Attribute); - printk(" Dir:%d\n",cp->Request.Type.Direction); - printk("Timeout:%d\n",cp->Request.Timeout); - printk("CDB: %16ph\n", cp->Request.CDB); - printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n", - cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower, - cp->ErrDesc.Len); - printk("sgs..........Errorinfo:\n"); - printk("scsistatus:%d\n", cp->err_info->ScsiStatus); - printk("senselen:%d\n", cp->err_info->SenseLen); - printk("cmd status:%d\n", cp->err_info->CommandStatus); - printk("resid cnt:%d\n", cp->err_info->ResidualCnt); - printk("offense size:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_size); - printk("offense byte:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_num); - printk("offense value:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_value); -} -#endif - -static int -find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun) -{ - /* finds an unused bus, target, lun for a new device */ - /* assumes h->scsi_ctlr->lock is held */ - int i, found=0; - unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA]; - - memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA); - - target_taken[SELF_SCSI_ID] = 1; - for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) - target_taken[ccissscsi[h->ctlr].dev[i].target] = 1; - - for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) { - if (!target_taken[i]) { - *bus = 0; *target=i; *lun = 0; found=1; - break; - } - } - return (!found); -} -struct scsi2map { - char scsi3addr[8]; - int bus, target, lun; -}; - -static int -cciss_scsi_add_entry(ctlr_info_t *h, int hostno, - struct cciss_scsi_dev_t *device, - struct scsi2map *added, int *nadded) -{ - /* assumes h->scsi_ctlr->lock is held */ - int n = ccissscsi[h->ctlr].ndevices; - struct cciss_scsi_dev_t *sd; - int i, bus, target, lun; - unsigned char addr1[8], addr2[8]; - - if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) { - dev_warn(&h->pdev->dev, "Too many devices, " - "some will be inaccessible.\n"); - return -1; - } - - bus = target = -1; - lun = 0; - /* Is this device a non-zero lun of a multi-lun device */ - /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */ - if (device->scsi3addr[4] != 0) { - /* Search through our list and find the device which */ - /* has the same 8 byte LUN address, excepting byte 4. */ - /* Assign the same bus and target for this new LUN. */ - /* Use the logical unit number from the firmware. */ - memcpy(addr1, device->scsi3addr, 8); - addr1[4] = 0; - for (i = 0; i < n; i++) { - sd = &ccissscsi[h->ctlr].dev[i]; - memcpy(addr2, sd->scsi3addr, 8); - addr2[4] = 0; - /* differ only in byte 4? */ - if (memcmp(addr1, addr2, 8) == 0) { - bus = sd->bus; - target = sd->target; - lun = device->scsi3addr[4]; - break; - } - } - } - - sd = &ccissscsi[h->ctlr].dev[n]; - if (lun == 0) { - if (find_bus_target_lun(h, - &sd->bus, &sd->target, &sd->lun) != 0) - return -1; - } else { - sd->bus = bus; - sd->target = target; - sd->lun = lun; - } - added[*nadded].bus = sd->bus; - added[*nadded].target = sd->target; - added[*nadded].lun = sd->lun; - (*nadded)++; - - memcpy(sd->scsi3addr, device->scsi3addr, 8); - memcpy(sd->vendor, device->vendor, sizeof(sd->vendor)); - memcpy(sd->revision, device->revision, sizeof(sd->revision)); - memcpy(sd->device_id, device->device_id, sizeof(sd->device_id)); - sd->devtype = device->devtype; - - ccissscsi[h->ctlr].ndevices++; - - /* initially, (before registering with scsi layer) we don't - know our hostno and we don't want to print anything first - time anyway (the scsi layer's inquiries will show that info) */ - if (hostno != -1) - dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", - scsi_device_type(sd->devtype), hostno, - sd->bus, sd->target, sd->lun); - return 0; -} - -static void -cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry, - struct scsi2map *removed, int *nremoved) -{ - /* assumes h->ctlr]->scsi_ctlr->lock is held */ - int i; - struct cciss_scsi_dev_t sd; - - if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return; - sd = ccissscsi[h->ctlr].dev[entry]; - removed[*nremoved].bus = sd.bus; - removed[*nremoved].target = sd.target; - removed[*nremoved].lun = sd.lun; - (*nremoved)++; - for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++) - ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1]; - ccissscsi[h->ctlr].ndevices--; - dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", - scsi_device_type(sd.devtype), hostno, - sd.bus, sd.target, sd.lun); -} - - -#define SCSI3ADDR_EQ(a,b) ( \ - (a)[7] == (b)[7] && \ - (a)[6] == (b)[6] && \ - (a)[5] == (b)[5] && \ - (a)[4] == (b)[4] && \ - (a)[3] == (b)[3] && \ - (a)[2] == (b)[2] && \ - (a)[1] == (b)[1] && \ - (a)[0] == (b)[0]) - -static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr) -{ - /* called when scsi_add_device fails in order to re-adjust */ - /* ccissscsi[] to match the mid layer's view. */ - unsigned long flags; - int i, j; - CPQ_TAPE_LOCK(h, flags); - for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) { - if (memcmp(scsi3addr, - ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) { - for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++) - ccissscsi[h->ctlr].dev[j] = - ccissscsi[h->ctlr].dev[j+1]; - ccissscsi[h->ctlr].ndevices--; - break; - } - } - CPQ_TAPE_UNLOCK(h, flags); -} - -static int device_is_the_same(struct cciss_scsi_dev_t *dev1, - struct cciss_scsi_dev_t *dev2) -{ - return dev1->devtype == dev2->devtype && - memcmp(dev1->scsi3addr, dev2->scsi3addr, - sizeof(dev1->scsi3addr)) == 0 && - memcmp(dev1->device_id, dev2->device_id, - sizeof(dev1->device_id)) == 0 && - memcmp(dev1->vendor, dev2->vendor, - sizeof(dev1->vendor)) == 0 && - memcmp(dev1->model, dev2->model, - sizeof(dev1->model)) == 0 && - memcmp(dev1->revision, dev2->revision, - sizeof(dev1->revision)) == 0; -} - -static int -adjust_cciss_scsi_table(ctlr_info_t *h, int hostno, - struct cciss_scsi_dev_t sd[], int nsds) -{ - /* sd contains scsi3 addresses and devtypes, but - bus target and lun are not filled in. This funciton - takes what's in sd to be the current and adjusts - ccissscsi[] to be in line with what's in sd. */ - - int i,j, found, changes=0; - struct cciss_scsi_dev_t *csd; - unsigned long flags; - struct scsi2map *added, *removed; - int nadded, nremoved; - struct Scsi_Host *sh = NULL; - - added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA, - GFP_KERNEL); - removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA, - GFP_KERNEL); - - if (!added || !removed) { - dev_warn(&h->pdev->dev, - "Out of memory in adjust_cciss_scsi_table\n"); - goto free_and_out; - } - - CPQ_TAPE_LOCK(h, flags); - - if (hostno != -1) /* if it's not the first time... */ - sh = h->scsi_ctlr->scsi_host; - - /* find any devices in ccissscsi[] that are not in - sd[] and remove them from ccissscsi[] */ - - i = 0; - nremoved = 0; - nadded = 0; - while (i < ccissscsi[h->ctlr].ndevices) { - csd = &ccissscsi[h->ctlr].dev[i]; - found=0; - for (j=0;jscsi3addr)) { - if (device_is_the_same(&sd[j], csd)) - found=2; - else - found=1; - break; - } - } - - if (found == 0) { /* device no longer present. */ - changes++; - cciss_scsi_remove_entry(h, hostno, i, - removed, &nremoved); - /* remove ^^^, hence i not incremented */ - } else if (found == 1) { /* device is different in some way */ - changes++; - dev_info(&h->pdev->dev, - "device c%db%dt%dl%d has changed.\n", - hostno, csd->bus, csd->target, csd->lun); - cciss_scsi_remove_entry(h, hostno, i, - removed, &nremoved); - /* remove ^^^, hence i not incremented */ - if (cciss_scsi_add_entry(h, hostno, &sd[j], - added, &nadded) != 0) - /* we just removed one, so add can't fail. */ - BUG(); - csd->devtype = sd[j].devtype; - memcpy(csd->device_id, sd[j].device_id, - sizeof(csd->device_id)); - memcpy(csd->vendor, sd[j].vendor, - sizeof(csd->vendor)); - memcpy(csd->model, sd[j].model, - sizeof(csd->model)); - memcpy(csd->revision, sd[j].revision, - sizeof(csd->revision)); - } else /* device is same as it ever was, */ - i++; /* so just move along. */ - } - - /* Now, make sure every device listed in sd[] is also - listed in ccissscsi[], adding them if they aren't found */ - - for (i=0;ictlr].ndevices; j++) { - csd = &ccissscsi[h->ctlr].dev[j]; - if (SCSI3ADDR_EQ(sd[i].scsi3addr, - csd->scsi3addr)) { - if (device_is_the_same(&sd[i], csd)) - found=2; /* found device */ - else - found=1; /* found a bug. */ - break; - } - } - if (!found) { - changes++; - if (cciss_scsi_add_entry(h, hostno, &sd[i], - added, &nadded) != 0) - break; - } else if (found == 1) { - /* should never happen... */ - changes++; - dev_warn(&h->pdev->dev, - "device unexpectedly changed\n"); - /* but if it does happen, we just ignore that device */ - } - } - CPQ_TAPE_UNLOCK(h, flags); - - /* Don't notify scsi mid layer of any changes the first time through */ - /* (or if there are no changes) scsi_scan_host will do it later the */ - /* first time through. */ - if (hostno == -1 || !changes) - goto free_and_out; - - /* Notify scsi mid layer of any removed devices */ - for (i = 0; i < nremoved; i++) { - struct scsi_device *sdev = - scsi_device_lookup(sh, removed[i].bus, - removed[i].target, removed[i].lun); - if (sdev != NULL) { - scsi_remove_device(sdev); - scsi_device_put(sdev); - } else { - /* We don't expect to get here. */ - /* future cmds to this device will get selection */ - /* timeout as if the device was gone. */ - dev_warn(&h->pdev->dev, "didn't find " - "c%db%dt%dl%d\n for removal.", - hostno, removed[i].bus, - removed[i].target, removed[i].lun); - } - } - - /* Notify scsi mid layer of any added devices */ - for (i = 0; i < nadded; i++) { - int rc; - rc = scsi_add_device(sh, added[i].bus, - added[i].target, added[i].lun); - if (rc == 0) - continue; - dev_warn(&h->pdev->dev, "scsi_add_device " - "c%db%dt%dl%d failed, device not added.\n", - hostno, added[i].bus, added[i].target, added[i].lun); - /* now we have to remove it from ccissscsi, */ - /* since it didn't get added to scsi mid layer */ - fixup_botched_add(h, added[i].scsi3addr); - } - -free_and_out: - kfree(added); - kfree(removed); - return 0; -} - -static int -lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr) -{ - int i; - struct cciss_scsi_dev_t *sd; - unsigned long flags; - - CPQ_TAPE_LOCK(h, flags); - for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) { - sd = &ccissscsi[h->ctlr].dev[i]; - if (sd->bus == bus && - sd->target == target && - sd->lun == lun) { - memcpy(scsi3addr, &sd->scsi3addr[0], 8); - CPQ_TAPE_UNLOCK(h, flags); - return 0; - } - } - CPQ_TAPE_UNLOCK(h, flags); - return -1; -} - -static void -cciss_scsi_setup(ctlr_info_t *h) -{ - struct cciss_scsi_adapter_data_t * shba; - - ccissscsi[h->ctlr].ndevices = 0; - shba = kmalloc(sizeof(*shba), GFP_KERNEL); - if (shba == NULL) - return; - shba->scsi_host = NULL; - spin_lock_init(&shba->lock); - shba->registered = 0; - if (scsi_cmd_stack_setup(h, shba) != 0) { - kfree(shba); - shba = NULL; - } - h->scsi_ctlr = shba; - return; -} - -static void complete_scsi_command(CommandList_struct *c, int timeout, - __u32 tag) -{ - struct scsi_cmnd *cmd; - ctlr_info_t *h; - ErrorInfo_struct *ei; - - ei = c->err_info; - - /* First, see if it was a message rather than a command */ - if (c->Request.Type.Type == TYPE_MSG) { - c->cmd_type = CMD_MSG_DONE; - return; - } - - cmd = (struct scsi_cmnd *) c->scsi_cmd; - h = hba[c->ctlr]; - - scsi_dma_unmap(cmd); - if (c->Header.SGTotal > h->max_cmd_sgentries) - cciss_unmap_sg_chain_block(h, c); - - cmd->result = (DID_OK << 16); /* host byte */ - cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ - /* cmd->result |= (GOOD < 1); */ /* status byte */ - - cmd->result |= (ei->ScsiStatus); - /* printk("Scsistatus is 0x%02x\n", ei->ScsiStatus); */ - - /* copy the sense data whether we need to or not. */ - - memcpy(cmd->sense_buffer, ei->SenseInfo, - ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? - SCSI_SENSE_BUFFERSIZE : - ei->SenseLen); - scsi_set_resid(cmd, ei->ResidualCnt); - - if (ei->CommandStatus != 0) { /* an error has occurred */ - switch (ei->CommandStatus) { - case CMD_TARGET_STATUS: - /* Pass it up to the upper layers... */ - if (!ei->ScsiStatus) { - - /* Ordinarily, this case should never happen, but there is a bug - in some released firmware revisions that allows it to happen - if, for example, a 4100 backplane loses power and the tape - drive is in it. We assume that it's a fatal error of some - kind because we can't show that it wasn't. We will make it - look like selection timeout since that is the most common - reason for this to occur, and it's severe enough. */ - - cmd->result = DID_NO_CONNECT << 16; - } - break; - case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ - break; - case CMD_DATA_OVERRUN: - dev_warn(&h->pdev->dev, "%p has" - " completed with data overrun " - "reported\n", c); - break; - case CMD_INVALID: { - /* - print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false); - print_cmd(c); - */ - /* We get CMD_INVALID if you address a non-existent tape drive instead - of a selection timeout (no response). You will see this if you yank - out a tape drive, then try to access it. This is kind of a shame - because it means that any other CMD_INVALID (e.g. driver bug) will - get interpreted as a missing target. */ - cmd->result = DID_NO_CONNECT << 16; - } - break; - case CMD_PROTOCOL_ERR: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, - "%p has protocol error\n", c); - break; - case CMD_HARDWARE_ERR: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, - "%p had hardware error\n", c); - break; - case CMD_CONNECTION_LOST: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, - "%p had connection lost\n", c); - break; - case CMD_ABORTED: - cmd->result = DID_ABORT << 16; - dev_warn(&h->pdev->dev, "%p was aborted\n", c); - break; - case CMD_ABORT_FAILED: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, - "%p reports abort failed\n", c); - break; - case CMD_UNSOLICITED_ABORT: - cmd->result = DID_ABORT << 16; - dev_warn(&h->pdev->dev, "%p aborted due to an " - "unsolicited abort\n", c); - break; - case CMD_TIMEOUT: - cmd->result = DID_TIME_OUT << 16; - dev_warn(&h->pdev->dev, "%p timedout\n", c); - break; - case CMD_UNABORTABLE: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, "c %p command " - "unabortable\n", c); - break; - default: - cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, - "%p returned unknown status %x\n", c, - ei->CommandStatus); - } - } - cmd->scsi_done(cmd); - scsi_cmd_free(h, c); -} - -static int -cciss_scsi_detect(ctlr_info_t *h) -{ - struct Scsi_Host *sh; - int error; - - sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *)); - if (sh == NULL) - goto fail; - sh->io_port = 0; // good enough? FIXME, - sh->n_io_port = 0; // I don't think we use these two... - sh->this_id = SELF_SCSI_ID; - sh->can_queue = cciss_tape_cmds; - sh->sg_tablesize = h->maxsgentries; - sh->max_cmd_len = MAX_COMMAND_SIZE; - sh->max_sectors = h->cciss_max_sectors; - - ((struct cciss_scsi_adapter_data_t *) - h->scsi_ctlr)->scsi_host = sh; - sh->hostdata[0] = (unsigned long) h; - sh->irq = h->intr[SIMPLE_MODE_INT]; - sh->unique_id = sh->irq; - error = scsi_add_host(sh, &h->pdev->dev); - if (error) - goto fail_host_put; - scsi_scan_host(sh); - return 1; - - fail_host_put: - scsi_host_put(sh); - fail: - return 0; -} - -static void -cciss_unmap_one(struct pci_dev *pdev, - CommandList_struct *c, - size_t buflen, - int data_direction) -{ - u64bit addr64; - - addr64.val32.lower = c->SG[0].Addr.lower; - addr64.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction); -} - -static void -cciss_map_one(struct pci_dev *pdev, - CommandList_struct *c, - unsigned char *buf, - size_t buflen, - int data_direction) -{ - __u64 addr64; - - addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction); - c->SG[0].Addr.lower = - (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); - c->SG[0].Addr.upper = - (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); - c->SG[0].Len = buflen; - c->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */ - c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */ -} - -static int -cciss_scsi_do_simple_cmd(ctlr_info_t *h, - CommandList_struct *c, - unsigned char *scsi3addr, - unsigned char *cdb, - unsigned char cdblen, - unsigned char *buf, int bufsize, - int direction) -{ - DECLARE_COMPLETION_ONSTACK(wait); - - c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */ - c->scsi_cmd = NULL; - c->Header.ReplyQueue = 0; /* unused in simple mode */ - memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN)); - c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ - // Fill in the request block... - - /* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n", - scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3], - scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */ - - memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); - memcpy(c->Request.CDB, cdb, cdblen); - c->Request.Timeout = 0; - c->Request.CDBLen = cdblen; - c->Request.Type.Type = TYPE_CMD; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = direction; - - /* Fill in the SG list and do dma mapping */ - cciss_map_one(h->pdev, c, (unsigned char *) buf, - bufsize, DMA_FROM_DEVICE); - - c->waiting = &wait; - enqueue_cmd_and_start_io(h, c); - wait_for_completion(&wait); - - /* undo the dma mapping */ - cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE); - return(0); -} - -static void -cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c) -{ - ErrorInfo_struct *ei; - - ei = c->err_info; - switch (ei->CommandStatus) { - case CMD_TARGET_STATUS: - dev_warn(&h->pdev->dev, - "cmd %p has completed with errors\n", c); - dev_warn(&h->pdev->dev, - "cmd %p has SCSI Status = %x\n", - c, ei->ScsiStatus); - if (ei->ScsiStatus == 0) - dev_warn(&h->pdev->dev, - "SCSI status is abnormally zero. " - "(probably indicates selection timeout " - "reported incorrectly due to a known " - "firmware bug, circa July, 2001.)\n"); - break; - case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ - dev_info(&h->pdev->dev, "UNDERRUN\n"); - break; - case CMD_DATA_OVERRUN: - dev_warn(&h->pdev->dev, "%p has" - " completed with data overrun " - "reported\n", c); - break; - case CMD_INVALID: { - /* controller unfortunately reports SCSI passthru's */ - /* to non-existent targets as invalid commands. */ - dev_warn(&h->pdev->dev, - "%p is reported invalid (probably means " - "target device no longer present)\n", c); - /* - print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false); - print_cmd(c); - */ - } - break; - case CMD_PROTOCOL_ERR: - dev_warn(&h->pdev->dev, "%p has protocol error\n", c); - break; - case CMD_HARDWARE_ERR: - /* cmd->result = DID_ERROR << 16; */ - dev_warn(&h->pdev->dev, "%p had hardware error\n", c); - break; - case CMD_CONNECTION_LOST: - dev_warn(&h->pdev->dev, "%p had connection lost\n", c); - break; - case CMD_ABORTED: - dev_warn(&h->pdev->dev, "%p was aborted\n", c); - break; - case CMD_ABORT_FAILED: - dev_warn(&h->pdev->dev, - "%p reports abort failed\n", c); - break; - case CMD_UNSOLICITED_ABORT: - dev_warn(&h->pdev->dev, - "%p aborted due to an unsolicited abort\n", c); - break; - case CMD_TIMEOUT: - dev_warn(&h->pdev->dev, "%p timedout\n", c); - break; - case CMD_UNABORTABLE: - dev_warn(&h->pdev->dev, - "%p unabortable\n", c); - break; - default: - dev_warn(&h->pdev->dev, - "%p returned unknown status %x\n", - c, ei->CommandStatus); - } -} - -static int -cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr, - unsigned char page, unsigned char *buf, - unsigned char bufsize) -{ - int rc; - CommandList_struct *c; - char cdb[6]; - ErrorInfo_struct *ei; - unsigned long flags; - - spin_lock_irqsave(&h->lock, flags); - c = scsi_cmd_alloc(h); - spin_unlock_irqrestore(&h->lock, flags); - - if (c == NULL) { /* trouble... */ - printk("cmd_alloc returned NULL!\n"); - return -1; - } - - ei = c->err_info; - - cdb[0] = CISS_INQUIRY; - cdb[1] = (page != 0); - cdb[2] = page; - cdb[3] = 0; - cdb[4] = bufsize; - cdb[5] = 0; - rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb, - 6, buf, bufsize, XFER_READ); - - if (rc != 0) return rc; /* something went wrong */ - - if (ei->CommandStatus != 0 && - ei->CommandStatus != CMD_DATA_UNDERRUN) { - cciss_scsi_interpret_error(h, c); - rc = -1; - } - spin_lock_irqsave(&h->lock, flags); - scsi_cmd_free(h, c); - spin_unlock_irqrestore(&h->lock, flags); - return rc; -} - -/* Get the device id from inquiry page 0x83 */ -static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr, - unsigned char *device_id, int buflen) -{ - int rc; - unsigned char *buf; - - if (buflen > 16) - buflen = 16; - buf = kzalloc(64, GFP_KERNEL); - if (!buf) - return -1; - rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); - if (rc == 0) - memcpy(device_id, &buf[8], buflen); - kfree(buf); - return rc != 0; -} - -static int -cciss_scsi_do_report_phys_luns(ctlr_info_t *h, - ReportLunData_struct *buf, int bufsize) -{ - int rc; - CommandList_struct *c; - unsigned char cdb[12]; - unsigned char scsi3addr[8]; - ErrorInfo_struct *ei; - unsigned long flags; - - spin_lock_irqsave(&h->lock, flags); - c = scsi_cmd_alloc(h); - spin_unlock_irqrestore(&h->lock, flags); - if (c == NULL) { /* trouble... */ - printk("cmd_alloc returned NULL!\n"); - return -1; - } - - memset(&scsi3addr[0], 0, 8); /* address the controller */ - cdb[0] = CISS_REPORT_PHYS; - cdb[1] = 0; - cdb[2] = 0; - cdb[3] = 0; - cdb[4] = 0; - cdb[5] = 0; - cdb[6] = (bufsize >> 24) & 0xFF; //MSB - cdb[7] = (bufsize >> 16) & 0xFF; - cdb[8] = (bufsize >> 8) & 0xFF; - cdb[9] = bufsize & 0xFF; - cdb[10] = 0; - cdb[11] = 0; - - rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, - cdb, 12, - (unsigned char *) buf, - bufsize, XFER_READ); - - if (rc != 0) return rc; /* something went wrong */ - - ei = c->err_info; - if (ei->CommandStatus != 0 && - ei->CommandStatus != CMD_DATA_UNDERRUN) { - cciss_scsi_interpret_error(h, c); - rc = -1; - } - spin_lock_irqsave(&h->lock, flags); - scsi_cmd_free(h, c); - spin_unlock_irqrestore(&h->lock, flags); - return rc; -} - -static void -cciss_update_non_disk_devices(ctlr_info_t *h, int hostno) -{ - /* the idea here is we could get notified from /proc - that some devices have changed, so we do a report - physical luns cmd, and adjust our list of devices - accordingly. (We can't rely on the scsi-mid layer just - doing inquiries, because the "busses" that the scsi - mid-layer probes are totally fabricated by this driver, - so new devices wouldn't show up. - - the scsi3addr's of devices won't change so long as the - adapter is not reset. That means we can rescan and - tell which devices we already know about, vs. new - devices, vs. disappearing devices. - - Also, if you yank out a tape drive, then put in a disk - in it's place, (say, a configured volume from another - array controller for instance) _don't_ poke this driver - (so it thinks it's still a tape, but _do_ poke the scsi - mid layer, so it does an inquiry... the scsi mid layer - will see the physical disk. This would be bad. Need to - think about how to prevent that. One idea would be to - snoop all scsi responses and if an inquiry repsonse comes - back that reports a disk, chuck it an return selection - timeout instead and adjust our table... Not sure i like - that though. - - */ -#define OBDR_TAPE_INQ_SIZE 49 -#define OBDR_TAPE_SIG "$DR-10" - ReportLunData_struct *ld_buff; - unsigned char *inq_buff; - unsigned char scsi3addr[8]; - __u32 num_luns=0; - unsigned char *ch; - struct cciss_scsi_dev_t *currentsd, *this_device; - int ncurrent=0; - int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8; - int i; - - ld_buff = kzalloc(reportlunsize, GFP_KERNEL); - inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); - currentsd = kzalloc(sizeof(*currentsd) * - (CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL); - if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - goto out; - } - this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA]; - if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) { - ch = &ld_buff->LUNListLength[0]; - num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8; - if (num_luns > CISS_MAX_PHYS_LUN) { - printk(KERN_WARNING - "cciss: Maximum physical LUNs (%d) exceeded. " - "%d LUNs ignored.\n", CISS_MAX_PHYS_LUN, - num_luns - CISS_MAX_PHYS_LUN); - num_luns = CISS_MAX_PHYS_LUN; - } - } - else { - printk(KERN_ERR "cciss: Report physical LUNs failed.\n"); - goto out; - } - - - /* adjust our table of devices */ - for (i = 0; i < num_luns; i++) { - /* for each physical lun, do an inquiry */ - if (ld_buff->LUN[i][3] & 0xC0) continue; - memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); - memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8); - - if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, - (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) - /* Inquiry failed (msg printed already) */ - continue; /* so we will skip this device. */ - - this_device->devtype = (inq_buff[0] & 0x1f); - this_device->bus = -1; - this_device->target = -1; - this_device->lun = -1; - memcpy(this_device->scsi3addr, scsi3addr, 8); - memcpy(this_device->vendor, &inq_buff[8], - sizeof(this_device->vendor)); - memcpy(this_device->model, &inq_buff[16], - sizeof(this_device->model)); - memcpy(this_device->revision, &inq_buff[32], - sizeof(this_device->revision)); - memset(this_device->device_id, 0, - sizeof(this_device->device_id)); - cciss_scsi_get_device_id(h, scsi3addr, - this_device->device_id, sizeof(this_device->device_id)); - - switch (this_device->devtype) { - case 0x05: /* CD-ROM */ { - - /* We don't *really* support actual CD-ROM devices, - * just this "One Button Disaster Recovery" tape drive - * which temporarily pretends to be a CD-ROM drive. - * So we check that the device is really an OBDR tape - * device by checking for "$DR-10" in bytes 43-48 of - * the inquiry data. - */ - char obdr_sig[7]; - - strncpy(obdr_sig, &inq_buff[43], 6); - obdr_sig[6] = '\0'; - if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) - /* Not OBDR device, ignore it. */ - break; - } - /* fall through . . . */ - case 0x01: /* sequential access, (tape) */ - case 0x08: /* medium changer */ - if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) { - printk(KERN_INFO "cciss%d: %s ignored, " - "too many devices.\n", h->ctlr, - scsi_device_type(this_device->devtype)); - break; - } - currentsd[ncurrent] = *this_device; - ncurrent++; - break; - default: - break; - } - } - - adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent); -out: - kfree(inq_buff); - kfree(ld_buff); - kfree(currentsd); - return; -} - -static int -is_keyword(char *ptr, int len, char *verb) // Thanks to ncr53c8xx.c -{ - int verb_len = strlen(verb); - if (len >= verb_len && !memcmp(verb,ptr,verb_len)) - return verb_len; - else - return 0; -} - -static int -cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length) -{ - int arg_len; - - if ((arg_len = is_keyword(buffer, length, "rescan")) != 0) - cciss_update_non_disk_devices(h, hostno); - else - return -EINVAL; - return length; -} - -static int -cciss_scsi_write_info(struct Scsi_Host *sh, - char *buffer, /* data buffer */ - int length) /* length of data in buffer */ -{ - ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0]; - if (h == NULL) /* This really shouldn't ever happen. */ - return -EINVAL; - - return cciss_scsi_user_command(h, sh->host_no, - buffer, length); -} - -static int -cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh) -{ - - ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0]; - int i; - - if (h == NULL) /* This really shouldn't ever happen. */ - return -EINVAL; - - seq_printf(m, "cciss%d: SCSI host: %d\n", - h->ctlr, sh->host_no); - - /* this information is needed by apps to know which cciss - device corresponds to which scsi host number without - having to open a scsi target device node. The device - information is not a duplicate of /proc/scsi/scsi because - the two may be out of sync due to scsi hotplug, rather - this info is for an app to be able to use to know how to - get them back in sync. */ - - for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) { - struct cciss_scsi_dev_t *sd = - &ccissscsi[h->ctlr].dev[i]; - seq_printf(m, "c%db%dt%dl%d %02d " - "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", - sh->host_no, sd->bus, sd->target, sd->lun, - sd->devtype, - sd->scsi3addr[0], sd->scsi3addr[1], - sd->scsi3addr[2], sd->scsi3addr[3], - sd->scsi3addr[4], sd->scsi3addr[5], - sd->scsi3addr[6], sd->scsi3addr[7]); - } - return 0; -} - -/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci - dma mapping and fills in the scatter gather entries of the - cciss command, c. */ - -static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c, - struct scsi_cmnd *cmd) -{ - unsigned int len; - struct scatterlist *sg; - __u64 addr64; - int request_nsgs, i, chained, sg_index; - struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr; - SGDescriptor_struct *curr_sg; - - BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); - - chained = 0; - sg_index = 0; - curr_sg = c->SG; - request_nsgs = scsi_dma_map(cmd); - if (request_nsgs) { - scsi_for_each_sg(cmd, sg, request_nsgs, i) { - if (sg_index + 1 == h->max_cmd_sgentries && - !chained && request_nsgs - i > 1) { - chained = 1; - sg_index = 0; - curr_sg = sa->cmd_sg_list[c->cmdindex]; - } - addr64 = (__u64) sg_dma_address(sg); - len = sg_dma_len(sg); - curr_sg[sg_index].Addr.lower = - (__u32) (addr64 & 0x0FFFFFFFFULL); - curr_sg[sg_index].Addr.upper = - (__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL); - curr_sg[sg_index].Len = len; - curr_sg[sg_index].Ext = 0; - ++sg_index; - } - if (chained) - cciss_map_sg_chain_block(h, c, - sa->cmd_sg_list[c->cmdindex], - (request_nsgs - (h->max_cmd_sgentries - 1)) * - sizeof(SGDescriptor_struct)); - } - /* track how many SG entries we are using */ - if (request_nsgs > h->maxSG) - h->maxSG = request_nsgs; - c->Header.SGTotal = (u16) request_nsgs + chained; - if (request_nsgs > h->max_cmd_sgentries) - c->Header.SGList = h->max_cmd_sgentries; - else - c->Header.SGList = c->Header.SGTotal; - return; -} - - -static int -cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ctlr_info_t *h; - int rc; - unsigned char scsi3addr[8]; - CommandList_struct *c; - unsigned long flags; - - // Get the ptr to our adapter structure (hba[i]) out of cmd->host. - // We violate cmd->host privacy here. (Is there another way?) - h = (ctlr_info_t *) cmd->device->host->hostdata[0]; - - rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id, - cmd->device->lun, scsi3addr); - if (rc != 0) { - /* the scsi nexus does not match any that we presented... */ - /* pretend to mid layer that we got selection timeout */ - cmd->result = DID_NO_CONNECT << 16; - done(cmd); - /* we might want to think about registering controller itself - as a processor device on the bus so sg binds to it. */ - return 0; - } - - /* Ok, we have a reasonable scsi nexus, so send the cmd down, and - see what the device thinks of it. */ - - spin_lock_irqsave(&h->lock, flags); - c = scsi_cmd_alloc(h); - spin_unlock_irqrestore(&h->lock, flags); - if (c == NULL) { /* trouble... */ - dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n"); - /* FIXME: next 3 lines are -> BAD! <- */ - cmd->result = DID_NO_CONNECT << 16; - done(cmd); - return 0; - } - - // Fill in the command list header - - cmd->scsi_done = done; // save this for use by completion code - - /* save c in case we have to abort it */ - cmd->host_scribble = (unsigned char *) c; - - c->cmd_type = CMD_SCSI; - c->scsi_cmd = cmd; - c->Header.ReplyQueue = 0; /* unused in simple mode */ - memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); - c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ - - // Fill in the request block... - - c->Request.Timeout = 0; - memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); - BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); - c->Request.CDBLen = cmd->cmd_len; - memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); - c->Request.Type.Type = TYPE_CMD; - c->Request.Type.Attribute = ATTR_SIMPLE; - switch (cmd->sc_data_direction) { - case DMA_TO_DEVICE: - c->Request.Type.Direction = XFER_WRITE; - break; - case DMA_FROM_DEVICE: - c->Request.Type.Direction = XFER_READ; - break; - case DMA_NONE: - c->Request.Type.Direction = XFER_NONE; - break; - case DMA_BIDIRECTIONAL: - // This can happen if a buggy application does a scsi passthru - // and sets both inlen and outlen to non-zero. ( see - // ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) - - c->Request.Type.Direction = XFER_RSVD; - // This is technically wrong, and cciss controllers should - // reject it with CMD_INVALID, which is the most correct - // response, but non-fibre backends appear to let it - // slide by, and give the same results as if this field - // were set correctly. Either way is acceptable for - // our purposes here. - - break; - - default: - dev_warn(&h->pdev->dev, "unknown data direction: %d\n", - cmd->sc_data_direction); - BUG(); - break; - } - cciss_scatter_gather(h, c, cmd); - enqueue_cmd_and_start_io(h, c); - /* the cmd'll come back via intr handler in complete_scsi_command() */ - return 0; -} - -static DEF_SCSI_QCMD(cciss_scsi_queue_command) - -static void cciss_unregister_scsi(ctlr_info_t *h) -{ - struct cciss_scsi_adapter_data_t *sa; - struct cciss_scsi_cmd_stack_t *stk; - unsigned long flags; - - /* we are being forcibly unloaded, and may not refuse. */ - - spin_lock_irqsave(&h->lock, flags); - sa = h->scsi_ctlr; - stk = &sa->cmd_stack; - - /* if we weren't ever actually registered, don't unregister */ - if (sa->registered) { - spin_unlock_irqrestore(&h->lock, flags); - scsi_remove_host(sa->scsi_host); - scsi_host_put(sa->scsi_host); - spin_lock_irqsave(&h->lock, flags); - } - - /* set scsi_host to NULL so our detect routine will - find us on register */ - sa->scsi_host = NULL; - spin_unlock_irqrestore(&h->lock, flags); - scsi_cmd_stack_free(h); - kfree(sa); -} - -static int cciss_engage_scsi(ctlr_info_t *h) -{ - struct cciss_scsi_adapter_data_t *sa; - struct cciss_scsi_cmd_stack_t *stk; - unsigned long flags; - - spin_lock_irqsave(&h->lock, flags); - sa = h->scsi_ctlr; - stk = &sa->cmd_stack; - - if (sa->registered) { - dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n"); - spin_unlock_irqrestore(&h->lock, flags); - return -ENXIO; - } - sa->registered = 1; - spin_unlock_irqrestore(&h->lock, flags); - cciss_update_non_disk_devices(h, -1); - cciss_scsi_detect(h); - return 0; -} - -static void -cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h) -{ - unsigned long flags; - - CPQ_TAPE_LOCK(h, flags); - seq_printf(seq, - "Sequential access devices: %d\n\n", - ccissscsi[h->ctlr].ndevices); - CPQ_TAPE_UNLOCK(h, flags); -} - -static int wait_for_device_to_become_ready(ctlr_info_t *h, - unsigned char lunaddr[]) -{ - int rc; - int count = 0; - int waittime = HZ; - CommandList_struct *c; - - c = cmd_alloc(h); - if (!c) { - dev_warn(&h->pdev->dev, "out of memory in " - "wait_for_device_to_become_ready.\n"); - return IO_ERROR; - } - - /* Send test unit ready until device ready, or give up. */ - while (count < 20) { - - /* Wait for a bit. do this first, because if we send - * the TUR right away, the reset will just abort it. - */ - schedule_timeout_uninterruptible(waittime); - count++; - - /* Increase wait time with each try, up to a point. */ - if (waittime < (HZ * 30)) - waittime = waittime * 2; - - /* Send the Test Unit Ready */ - rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0, - lunaddr, TYPE_CMD); - if (rc == 0) - rc = sendcmd_withirq_core(h, c, 0); - - (void) process_sendcmd_error(h, c); - - if (rc != 0) - goto retry_tur; - - if (c->err_info->CommandStatus == CMD_SUCCESS) - break; - - if (c->err_info->CommandStatus == CMD_TARGET_STATUS && - c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) { - if (c->err_info->SenseInfo[2] == NO_SENSE) - break; - if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) { - unsigned char asc; - asc = c->err_info->SenseInfo[12]; - check_for_unit_attention(h, c); - if (asc == POWER_OR_RESET) - break; - } - } -retry_tur: - dev_warn(&h->pdev->dev, "Waiting %d secs " - "for device to become ready.\n", - waittime / HZ); - rc = 1; /* device not ready. */ - } - - if (rc) - dev_warn(&h->pdev->dev, "giving up on device.\n"); - else - dev_warn(&h->pdev->dev, "device is ready.\n"); - - cmd_free(h, c); - return rc; -} - -/* Need at least one of these error handlers to keep ../scsi/hosts.c from - * complaining. Doing a host- or bus-reset can't do anything good here. - * Despite what it might say in scsi_error.c, there may well be commands - * on the controller, as the cciss driver registers twice, once as a block - * device for the logical drives, and once as a scsi device, for any tape - * drives. So we know there are no commands out on the tape drives, but we - * don't know there are no commands on the controller, and it is likely - * that there probably are, as the cciss block device is most commonly used - * as a boot device (embedded controller on HP/Compaq systems.) -*/ - -static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) -{ - int rc; - CommandList_struct *cmd_in_trouble; - unsigned char lunaddr[8]; - ctlr_info_t *h; - - /* find the controller to which the command to be aborted was sent */ - h = (ctlr_info_t *) scsicmd->device->host->hostdata[0]; - if (h == NULL) /* paranoia */ - return FAILED; - dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n"); - /* find the command that's giving us trouble */ - cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble; - if (cmd_in_trouble == NULL) /* paranoia */ - return FAILED; - memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8); - /* send a reset to the SCSI LUN which the command was sent to */ - rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr, - TYPE_MSG); - if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0) - return SUCCESS; - dev_warn(&h->pdev->dev, "resetting device failed.\n"); - return FAILED; -} - -static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) -{ - int rc; - CommandList_struct *cmd_to_abort; - unsigned char lunaddr[8]; - ctlr_info_t *h; - - /* find the controller to which the command to be aborted was sent */ - h = (ctlr_info_t *) scsicmd->device->host->hostdata[0]; - if (h == NULL) /* paranoia */ - return FAILED; - dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n"); - - /* find the command to be aborted */ - cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble; - if (cmd_to_abort == NULL) /* paranoia */ - return FAILED; - memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8); - rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag, - 0, 0, lunaddr, TYPE_MSG); - if (rc == 0) - return SUCCESS; - return FAILED; - -} - -#else /* no CONFIG_CISS_SCSI_TAPE */ - -/* If no tape support, then these become defined out of existence */ - -#define cciss_scsi_setup(cntl_num) -#define cciss_engage_scsi(h) - -#endif /* CONFIG_CISS_SCSI_TAPE */ diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h deleted file mode 100644 index e71d986727ca..000000000000 --- a/drivers/block/cciss_scsi.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Disk Array driver for HP Smart Array controllers, SCSI Tape module. - * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA - * 02111-1307, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * - */ -#ifdef CONFIG_CISS_SCSI_TAPE -#ifndef _CCISS_SCSI_H_ -#define _CCISS_SCSI_H_ - -#include /* possibly irrelevant, since we don't show disks */ - - /* the scsi id of the adapter... */ -#define SELF_SCSI_ID 15 - /* 15 is somewhat arbitrary, since the scsi-2 bus - that's presented by the driver to the OS is - fabricated. The "real" scsi-3 bus the - hardware presents is fabricated too. - The actual, honest-to-goodness physical - bus that the devices are attached to is not - addressible natively, and may in fact turn - out to be not scsi at all. */ - - -/* - -If the upper scsi layer tries to track how many commands we have -outstanding, it will be operating under the misapprehension that it is -the only one sending us requests. We also have the block interface, -which is where most requests must surely come from, so the upper layer's -notion of how many requests we have outstanding will be wrong most or -all of the time. - -Note, the normal SCSI mid-layer error handling doesn't work well -for this driver because 1) it takes the io_request_lock before -calling error handlers and uses a local variable to store flags, -so the io_request_lock cannot be released and interrupts enabled -inside the error handlers, and, the error handlers cannot poll -for command completion because they might get commands from the -block half of the driver completing, and not know what to do -with them. That's what we get for making a hybrid scsi/block -driver, I suppose. - -*/ - -struct cciss_scsi_dev_t { - int devtype; - int bus, target, lun; /* as presented to the OS */ - unsigned char scsi3addr[8]; /* as presented to the HW */ - unsigned char device_id[16]; /* from inquiry pg. 0x83 */ - unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ - unsigned char model[16]; /* bytes 16-31 of inquiry data */ - unsigned char revision[4]; /* bytes 32-35 of inquiry data */ -}; - -struct cciss_scsi_hba_t { - char *name; - int ndevices; -#define CCISS_MAX_SCSI_DEVS_PER_HBA 16 - struct cciss_scsi_dev_t dev[CCISS_MAX_SCSI_DEVS_PER_HBA]; -}; - -#endif /* _CCISS_SCSI_H_ */ -#endif /* CONFIG_CISS_SCSI_TAPE */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 2da8f6f71002..c633b3541c59 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -81,6 +81,7 @@ MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); MODULE_VERSION(HPSA_DRIVER_VERSION); MODULE_LICENSE("GPL"); +MODULE_ALIAS("cciss"); static int hpsa_allow_any; module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR);