From: Patrice Chotard Date: Thu, 24 Jan 2013 08:47:22 +0000 (+0100) Subject: i2c: nomadik: adopt pinctrl support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=24e9e157d5197e469a414d0f52ce04e8b539a715;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git i2c: nomadik: adopt pinctrl support Amend the I2C nomadik pin controller to optionally take a pin control handle and set the state of the pins to: - "default" on boot, resume and before performing an i2c transfer - "idle" after initial default, after resume default, and after each i2c xfer - "sleep" on suspend() This should make it possible to optimize energy usage for the pins both for the suspend/resume cycle, and for runtime cases inbetween I2C transfers. Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij [wsa: fixed braces on one else-branch] Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 8b2ffcf45322..dd6a6913bd73 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -26,6 +26,7 @@ #include #include #include +#include #define DRIVER_NAME "nmk-i2c" @@ -147,6 +148,10 @@ struct i2c_nmk_client { * @stop: stop condition. * @xfer_complete: acknowledge completion for a I2C message. * @result: controller propogated result. + * @pinctrl: pinctrl handle. + * @pins_default: default state for the pins. + * @pins_idle: idle state for the pins. + * @pins_sleep: sleep state for the pins. * @busy: Busy doing transfer. */ struct nmk_i2c_dev { @@ -160,6 +165,11 @@ struct nmk_i2c_dev { int stop; struct completion xfer_complete; int result; + /* Three pin states - default, idle & sleep */ + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_idle; + struct pinctrl_state *pins_sleep; bool busy; }; @@ -636,6 +646,15 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, goto out_clk; } + /* Optionaly enable pins to be muxed in and configured */ + if (!IS_ERR(dev->pins_default)) { + status = pinctrl_select_state(dev->pinctrl, + dev->pins_default); + if (status) + dev_err(&dev->adev->dev, + "could not set default pins\n"); + } + status = init_hw(dev); if (status) goto out; @@ -663,6 +682,15 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, out: clk_disable_unprepare(dev->clk); out_clk: + /* Optionally let pins go into idle state */ + if (!IS_ERR(dev->pins_idle)) { + status = pinctrl_select_state(dev->pinctrl, + dev->pins_idle); + if (status) + dev_err(&dev->adev->dev, + "could not set pins to idle state\n"); + } + pm_runtime_put_sync(&dev->adev->dev); dev->busy = false; @@ -857,15 +885,41 @@ static int nmk_i2c_suspend(struct device *dev) { struct amba_device *adev = to_amba_device(dev); struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); + int ret; if (nmk_i2c->busy) return -EBUSY; + if (!IS_ERR(nmk_i2c->pins_sleep)) { + ret = pinctrl_select_state(nmk_i2c->pinctrl, + nmk_i2c->pins_sleep); + if (ret) + dev_err(dev, "could not set pins to sleep state\n"); + } + return 0; } static int nmk_i2c_resume(struct device *dev) { + struct amba_device *adev = to_amba_device(dev); + struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); + int ret; + + /* First go to the default state */ + if (!IS_ERR(nmk_i2c->pins_default)) { + ret = pinctrl_select_state(nmk_i2c->pinctrl, + nmk_i2c->pins_default); + if (ret) + dev_err(dev, "could not set pins to default state\n"); + } + /* Then let's idle the pins until the next transfer happens */ + if (!IS_ERR(nmk_i2c->pins_idle)) { + ret = pinctrl_select_state(nmk_i2c->pinctrl, + nmk_i2c->pins_idle); + if (ret) + dev_err(dev, "could not set pins to idle state\n"); + } return 0; } #else @@ -953,6 +1007,40 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) dev->adev = adev; amba_set_drvdata(adev, dev); + dev->pinctrl = devm_pinctrl_get(&adev->dev); + if (IS_ERR(dev->pinctrl)) { + ret = PTR_ERR(dev->pinctrl); + goto err_pinctrl; + } + + dev->pins_default = pinctrl_lookup_state(dev->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(dev->pins_default)) { + dev_err(&adev->dev, "could not get default pinstate\n"); + } else { + ret = pinctrl_select_state(dev->pinctrl, + dev->pins_default); + if (ret) + dev_dbg(&adev->dev, "could not set default pinstate\n"); + } + + dev->pins_idle = pinctrl_lookup_state(dev->pinctrl, + PINCTRL_STATE_IDLE); + if (IS_ERR(dev->pins_idle)) { + dev_dbg(&adev->dev, "could not get idle pinstate\n"); + } else { + /* If possible, let's go to idle until the first transfer */ + ret = pinctrl_select_state(dev->pinctrl, + dev->pins_idle); + if (ret) + dev_dbg(&adev->dev, "could not set idle pinstate\n"); + } + + dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl, + PINCTRL_STATE_SLEEP); + if (IS_ERR(dev->pins_sleep)) + dev_dbg(&adev->dev, "could not get sleep pinstate\n"); + dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (!dev->virtbase) { ret = -ENOMEM; @@ -1022,6 +1110,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) err_no_ioremap: amba_set_drvdata(adev, NULL); kfree(dev); + err_pinctrl: err_no_mem: return ret;