From: John Fastabend <john.r.fastabend@intel.com>
Date: Mon, 10 Oct 2011 09:16:41 +0000 (+0000)
Subject: net: allow vlan traffic to be received under bond
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2425717b27eb92b175335ca4ff0bb218cbe0cb64;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git

net: allow vlan traffic to be received under bond

The following configuration used to work as I expected. At least
we could use the fcoe interfaces to do MPIO and the bond0 iface
to do load balancing or failover.

       ---eth2.228-fcoe
       |
eth2 -----|
          |
          |---- bond0
          |
eth3 -----|
       |
       ---eth3.228-fcoe

This worked because of a change we added to allow inactive slaves
to rx 'exact' matches. This functionality was kept intact with the
rx_handler mechanism. However now the vlan interface attached to the
active slave never receives traffic because the bonding rx_handler
updates the skb->dev and goto's another_round. Previously, the
vlan_do_receive() logic was called before the bonding rx_handler.

Now by the time vlan_do_receive calls vlan_find_dev() the
skb->dev is set to bond0 and it is clear no vlan is attached
to this iface. The vlan lookup fails.

This patch moves the VLAN check above the rx_handler. A VLAN
tagged frame is now routed to the eth2.228-fcoe iface in the
above schematic. Untagged frames continue to the bond0 as
normal. This case also remains intact,

eth2 --> bond0 --> vlan.228

Here the skb is VLAN tagged but the vlan lookup fails on eth2
causing the bonding rx_handler to be called. On the second
pass the vlan lookup is on the bond0 iface and completes as
expected.

Putting a VLAN.228 on both the bond0 and eth2 device will
result in eth2.228 receiving the skb. I don't think this is
completely unexpected and was the result prior to the rx_handler
result.

Note, the same setup is also used for other storage traffic that
MPIO is used with eg. iSCSI and similar setups can be contrived
without storage protocols.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/net/core/dev.c b/net/core/dev.c
index 70ecb86439ca..8b6118a16b87 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3231,6 +3231,17 @@ another_round:
 ncls:
 #endif
 
+	if (vlan_tx_tag_present(skb)) {
+		if (pt_prev) {
+			ret = deliver_skb(skb, pt_prev, orig_dev);
+			pt_prev = NULL;
+		}
+		if (vlan_do_receive(&skb))
+			goto another_round;
+		else if (unlikely(!skb))
+			goto out;
+	}
+
 	rx_handler = rcu_dereference(skb->dev->rx_handler);
 	if (rx_handler) {
 		if (pt_prev) {
@@ -3251,17 +3262,6 @@ ncls:
 		}
 	}
 
-	if (vlan_tx_tag_present(skb)) {
-		if (pt_prev) {
-			ret = deliver_skb(skb, pt_prev, orig_dev);
-			pt_prev = NULL;
-		}
-		if (vlan_do_receive(&skb))
-			goto another_round;
-		else if (unlikely(!skb))
-			goto out;
-	}
-
 	/* deliver only exact match when indicated */
 	null_or_dev = deliver_exact ? skb->dev : NULL;