From: Russell King Date: Wed, 27 Jul 2005 10:35:54 +0000 (+0100) Subject: [SERIAL] Expose 8250_pci setup/removal/suspend/resume functions X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=241fc4367b3ca5d407b043599ed980304a70b91f;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [SERIAL] Expose 8250_pci setup/removal/suspend/resume functions Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they know slightly less about how they're attached to a PCI device. Expose this as the new interface for registering PCI serial ports, as well as the pciserial_board structure and associated flag definitions. Signed-off-by: Russell King --- diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 7ca07651c10c..4e9084edfc7e 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -33,38 +33,6 @@ #undef SERIAL_DEBUG_PCI -/* - * Definitions for PCI support. - */ -#define FL_BASE_MASK 0x0007 -#define FL_BASE0 0x0000 -#define FL_BASE1 0x0001 -#define FL_BASE2 0x0002 -#define FL_BASE3 0x0003 -#define FL_BASE4 0x0004 -#define FL_GET_BASE(x) (x & FL_BASE_MASK) - -/* Use successive BARs (PCI base address registers), - else use offset into some specified BAR */ -#define FL_BASE_BARS 0x0008 - -/* do not assign an irq */ -#define FL_NOIRQ 0x0080 - -/* Use the Base address register size to cap number of ports */ -#define FL_REGION_SZ_CAP 0x0100 - -struct pciserial_board { - unsigned int flags; - unsigned int num_ports; - unsigned int base_baud; - unsigned int uart_offset; - unsigned int reg_shift; - unsigned int first_offset; -}; - -struct serial_private; - /* * init function returns: * > 0 - number of ports @@ -1528,60 +1496,14 @@ serial_pci_matches(struct pciserial_board *board, board->first_offset == guessed->first_offset; } -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) { struct uart_port serial_port; struct serial_private *priv; - struct pciserial_board *board, tmp; struct pci_serial_quirk *quirk; int rc, nr_ports, i; - if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", - ent->driver_data); - return -EINVAL; - } - - board = &pci_boards[ent->driver_data]; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - if (ent->driver_data == pbn_default) { - /* - * Use a copy of the pci_board entry for this; - * avoid changing entries in the table. - */ - memcpy(&tmp, board, sizeof(struct pciserial_board)); - board = &tmp; - - /* - * We matched one of our class entries. Try to - * determine the parameters of this board. - */ - rc = serial_pci_guess_board(dev, board); - if (rc) - goto disable; - } else { - /* - * We matched an explicit entry. If we are able to - * detect this boards settings with our heuristic, - * then we no longer need this entry. - */ - memcpy(&tmp, &pci_boards[pbn_default], - sizeof(struct pciserial_board)); - rc = serial_pci_guess_board(dev, &tmp); - if (rc == 0 && serial_pci_matches(board, &tmp)) - moan_device("Redundant entry in serial pci_table.", - dev); - } - nr_ports = board->num_ports; /* @@ -1598,8 +1520,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) */ if (quirk->init) { rc = quirk->init(dev); - if (rc < 0) - goto disable; + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } if (rc) nr_ports = rc; } @@ -1608,8 +1532,8 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) sizeof(unsigned int) * nr_ports, GFP_KERNEL); if (!priv) { - rc = -ENOMEM; - goto deinit; + priv = ERR_PTR(-ENOMEM); + goto err_deinit; } memset(priv, 0, sizeof(struct serial_private) + @@ -1617,7 +1541,6 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) priv->dev = dev; priv->quirk = quirk; - pci_set_drvdata(dev, priv); memset(&serial_port, 0, sizeof(struct uart_port)); serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; @@ -1643,24 +1566,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) priv->nr = i; - return 0; + return priv; - deinit: + err_deinit: if (quirk->exit) quirk->exit(dev); - disable: - pci_disable_device(dev); - return rc; + err_out: + return priv; } +EXPORT_SYMBOL_GPL(pciserial_init_ports); -static void __devexit pciserial_remove_one(struct pci_dev *dev) +void pciserial_remove_ports(struct serial_private *priv) { - struct serial_private *priv = pci_get_drvdata(dev); struct pci_serial_quirk *quirk; int i; - pci_set_drvdata(dev, NULL); - for (i = 0; i < priv->nr; i++) serial8250_unregister_port(priv->line[i]); @@ -1673,25 +1593,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev) /* * Find the exit quirks. */ - quirk = find_quirk(dev); + quirk = find_quirk(priv->dev); if (quirk->exit) - quirk->exit(dev); + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + struct pciserial_board *board, tmp; + int rc; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, board); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + disable: pci_disable_device(dev); + return rc; +} - kfree(priv); +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); } static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) { struct serial_private *priv = pci_get_drvdata(dev); - if (priv) { - int i; + if (priv) + pciserial_suspend_ports(priv); - for (i = 0; i < priv->nr; i++) - serial8250_suspend_port(priv->line[i]); - } pci_save_state(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); return 0; @@ -1705,21 +1723,12 @@ static int pciserial_resume_one(struct pci_dev *dev) pci_restore_state(dev); if (priv) { - int i; - /* * The device may have been disabled. Re-enable it. */ pci_enable_device(dev); - /* - * Ensure that the board is correctly configured. - */ - if (priv->quirk->init) - priv->quirk->init(dev); - - for (i = 0; i < priv->nr; i++) - serial8250_resume_port(priv->line[i]); + pciserial_resume_ports(priv); } return 0; } diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h index 5f3ab21b339b..192c0ff7a774 100644 --- a/include/linux/8250_pci.h +++ b/include/linux/8250_pci.h @@ -1,2 +1,40 @@ +/* + * Definitions for PCI support. + */ +#define FL_BASE_MASK 0x0007 +#define FL_BASE0 0x0000 +#define FL_BASE1 0x0001 +#define FL_BASE2 0x0002 +#define FL_BASE3 0x0003 +#define FL_BASE4 0x0004 +#define FL_GET_BASE(x) (x & FL_BASE_MASK) + +/* Use successive BARs (PCI base address registers), + else use offset into some specified BAR */ +#define FL_BASE_BARS 0x0008 + +/* do not assign an irq */ +#define FL_NOIRQ 0x0080 + +/* Use the Base address register size to cap number of ports */ +#define FL_REGION_SZ_CAP 0x0100 + +struct pciserial_board { + unsigned int flags; + unsigned int num_ports; + unsigned int base_baud; + unsigned int uart_offset; + unsigned int reg_shift; + unsigned int first_offset; +}; + +struct serial_private; + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board); +void pciserial_remove_ports(struct serial_private *priv); +void pciserial_suspend_ports(struct serial_private *priv); +void pciserial_resume_ports(struct serial_private *priv); + int pci_siig10x_fn(struct pci_dev *dev, int enable); int pci_siig20x_fn(struct pci_dev *dev, int enable);