From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 11:03:23 +0000 (-0400) Subject: e1000: implementation of the multi-queue feature X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=24025e4ecf88743e1b3d46451b0e3f9de4bbcba5;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git e1000: implementation of the multi-queue feature Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5145b7345c22..ce1044a80bd2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -195,6 +195,11 @@ static int e1000_resume(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +#ifdef CONFIG_E1000_MQ +/* for multiple Rx queues */ +void e1000_rx_schedule(void *data); +#endif + /* Exported from other modules */ extern void e1000_check_options(struct e1000_adapter *adapter); @@ -368,6 +373,9 @@ e1000_down(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; e1000_irq_disable(adapter); +#ifdef CONFIG_E1000_MQ + while (atomic_read(&adapter->rx_sched_call_data.count) != 0); +#endif free_irq(adapter->pdev->irq, netdev); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2 && @@ -810,9 +818,19 @@ e1000_remove(struct pci_dev *pdev) if(!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +#ifdef CONFIG_E1000_NAPI + kfree(adapter->polling_netdev); +#endif + iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); +#ifdef CONFIG_E1000_MQ + free_percpu(adapter->cpu_netdev); + free_percpu(adapter->cpu_tx_ring); +#endif free_netdev(netdev); pci_disable_device(pdev); @@ -893,7 +911,21 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->master_slave = E1000_MASTER_SLAVE; } +#ifdef CONFIG_E1000_MQ + /* Number of supported queues */ + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + adapter->num_queues = 2; + break; + default: + adapter->num_queues = 1; + break; + } + adapter->num_queues = min(adapter->num_queues, num_online_cpus()); +#else adapter->num_queues = 1; +#endif if (e1000_alloc_queues(adapter)) { DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); @@ -909,6 +941,11 @@ e1000_sw_init(struct e1000_adapter *adapter) set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); } #endif + +#ifdef CONFIG_E1000_MQ + e1000_setup_queue_mapping(adapter); +#endif + atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); @@ -957,6 +994,39 @@ e1000_alloc_queues(struct e1000_adapter *adapter) return E1000_SUCCESS; } +#ifdef CONFIG_E1000_MQ +static void __devinit +e1000_setup_queue_mapping(struct e1000_adapter *adapter) +{ + int i, cpu; + + adapter->rx_sched_call_data.func = e1000_rx_schedule; + adapter->rx_sched_call_data.info = adapter->netdev; + cpus_clear(adapter->rx_sched_call_data.cpumask); + + adapter->cpu_netdev = alloc_percpu(struct net_device *); + adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *); + + lock_cpu_hotplug(); + i = 0; + for_each_online_cpu(cpu) { + *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues]; + /* This is incomplete because we'd like to assign separate + * physical cpus to these netdev polling structures and + * avoid saturating a subset of cpus. + */ + if (i < adapter->num_queues) { + *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i]; + adapter->cpu_for_queue[i] = cpu; + } else + *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL; + + i++; + } + unlock_cpu_hotplug(); +} +#endif + /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure @@ -1178,8 +1248,21 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Setup the HW Tx Head and Tail descriptor pointers */ - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); + switch (adapter->num_queues) { + case 2: + tdba = adapter->tx_ring[1].dma; + tdlen = adapter->tx_ring[1].count * + sizeof(struct e1000_tx_desc); + E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32)); + E1000_WRITE_REG(hw, TDLEN1, tdlen); + E1000_WRITE_REG(hw, TDH1, 0); + E1000_WRITE_REG(hw, TDT1, 0); + adapter->tx_ring[1].tdh = E1000_TDH1; + adapter->tx_ring[1].tdt = E1000_TDT1; + /* Fall Through */ + case 1: + default: tdba = adapter->tx_ring[0].dma; tdlen = adapter->tx_ring[0].count * sizeof(struct e1000_tx_desc); @@ -1190,6 +1273,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TDT, 0); adapter->tx_ring[0].tdh = E1000_TDH; adapter->tx_ring[0].tdt = E1000_TDT; + break; + } /* Set the default values for the Tx Inter Packet Gap timer */ @@ -1222,7 +1307,7 @@ e1000_configure_tx(struct e1000_adapter *adapter) tctl = E1000_READ_REG(hw, TCTL); tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | + tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); E1000_WRITE_REG(hw, TCTL, tctl); @@ -1518,6 +1603,21 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ + switch (adapter->num_queues) { +#ifdef CONFIG_E1000_MQ + case 2: + rdba = adapter->rx_ring[1].dma; + E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32)); + E1000_WRITE_REG(hw, RDLEN1, rdlen); + E1000_WRITE_REG(hw, RDH1, 0); + E1000_WRITE_REG(hw, RDT1, 0); + adapter->rx_ring[1].rdh = E1000_RDH1; + adapter->rx_ring[1].rdt = E1000_RDT1; + /* Fall Through */ +#endif + case 1: + default: rdba = adapter->rx_ring[0].dma; E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); @@ -1527,6 +1627,47 @@ e1000_configure_rx(struct e1000_adapter *adapter) adapter->rx_ring[0].rdh = E1000_RDH; adapter->rx_ring[0].rdt = E1000_RDT; break; + } + +#ifdef CONFIG_E1000_MQ + if (adapter->num_queues > 1) { + uint32_t random[10]; + + get_random_bytes(&random[0], 40); + + if (hw->mac_type <= e1000_82572) { + E1000_WRITE_REG(hw, RSSIR, 0); + E1000_WRITE_REG(hw, RSSIM, 0); + } + + switch (adapter->num_queues) { + case 2: + default: + reta = 0x00800080; + mrqc = E1000_MRQC_ENABLE_RSS_2Q; + break; + } + + /* Fill out redirection table */ + for (i = 0; i < 32; i++) + E1000_WRITE_REG_ARRAY(hw, RETA, i, reta); + /* Fill out hash function seeds */ + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]); + + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP); + E1000_WRITE_REG(hw, MRQC, mrqc); + } + + /* Multiqueue and packet checksumming are mutually exclusive. */ + if (hw->mac_type >= e1000_82571) { + rxcsum = E1000_READ_REG(hw, RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + E1000_WRITE_REG(hw, RXCSUM, rxcsum); + } + +#else /* Enable 82543 Receive Checksum Offload for TCP and UDP */ if (hw->mac_type >= e1000_82543) { @@ -1546,6 +1687,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) } E1000_WRITE_REG(hw, RXCSUM, rxcsum); } +#endif /* CONFIG_E1000_MQ */ if (hw->mac_type == e1000_82573) E1000_WRITE_REG(hw, ERT, 0x0100); @@ -2488,7 +2630,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; +#ifdef CONFIG_E1000_MQ + tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id()); +#else tx_ring = adapter->tx_ring; +#endif + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2879,6 +3026,29 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_E1000_MQ +void +e1000_rx_schedule(void *data) +{ + struct net_device *poll_dev, *netdev = data; + struct e1000_adapter *adapter = netdev->priv; + int this_cpu = get_cpu(); + + poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu); + if (poll_dev == NULL) { + put_cpu(); + return; + } + + if (likely(netif_rx_schedule_prep(poll_dev))) + __netif_rx_schedule(poll_dev); + else + e1000_irq_enable(adapter); + + put_cpu(); +} +#endif + /** * e1000_intr - Interrupt Handler * @irq: interrupt number @@ -2907,12 +3077,27 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_MQ + if (atomic_read(&adapter->rx_sched_call_data.count) == 0) { + cpu_set(adapter->cpu_for_queue[0], + adapter->rx_sched_call_data.cpumask); + for (i = 1; i < adapter->num_queues; i++) { + cpu_set(adapter->cpu_for_queue[i], + adapter->rx_sched_call_data.cpumask); + atomic_inc(&adapter->irq_sem); + } + atomic_set(&adapter->rx_sched_call_data.count, i); + smp_call_async_mask(&adapter->rx_sched_call_data); + } else { + printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); } #else if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) __netif_rx_schedule(&adapter->polling_netdev[0]); else e1000_irq_enable(adapter); +#endif +#else /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent.