From: Oliver Neukum <oliver@neukum.org>
Date: Mon, 20 Apr 2009 15:28:53 +0000 (+0200)
Subject: USB: removal of tty->low_latency hack dating back to the old serial code
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=2400a2bfbd0e912193fe3b077f492d4980141813;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

USB: removal of tty->low_latency hack dating back to the old serial code

This removes tty->low_latency from all USB serial drivers that push
data into the tty layer at hard interrupt context. It's no longer needed
and actually harmful.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 858bdd038fbc..dd501bb63ed6 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -175,13 +175,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 	dbg("%s - usb_clear_halt", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->rdtodo = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index eae4740d448c..e568710b263f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty,
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* setting to zero could cause data loss */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* raise both lines and set termios */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_control = CONTROL_DTR | CONTROL_RTS;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8a69cce40b6d..c709ec474a80 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty,
 	termios->c_cflag
 		|= CS8;		/* character size 8 bits */
 
-	/*
-	 * Force low_latency on; otherwise the pushes are scheduled;
-	 * this is bad as it opens up the possibility of dropping bytes
-	 * on the floor.  We don't want to drop bytes on the floor. :)
-	 */
-	tty->low_latency = 1;
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a26a0e2cdb4a..586d30ff450b 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9d57cace3731..4cec9906ccf3 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces the data
-	   through, otherwise it is scheduled, and with high data rates (like
-	   with OHCI) data can get lost. */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0d1ad9..fb4a73d090f6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = {
 /* local variables */
 static int debug;
 
-static int low_latency = 1;	/* tty low latency flag, on by default */
-
 static atomic_t CmdUrbs;	/* Number of outstanding Command Write Urbs */
 
 
@@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	/* see if we've set up our endpoint info yet (can't set it up
 	   in edge_startup as the structures were not set up at that time.) */
 	serial = port->serial;
@@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00ddc41..513b25e044c1 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc {
 #define EDGE_READ_URB_STOPPING	1
 #define EDGE_READ_URB_STOPPED	2
 
-#define EDGE_LOW_LATENCY	1
 #define EDGE_CLOSING_WAIT	4000	/* in .01 sec */
 
 #define EDGE_OUT_BUF_SIZE	1024
@@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber;
 
 static int debug;
 
-static int low_latency = EDGE_LOW_LATENCY;
 static int closing_wait = EDGE_CLOSING_WAIT;
 static int ignore_cpu_rev;
 static int default_uart_mode;		/* RS232 */
@@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
 	case 0:
@@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ef92095b0732..cd62825a9ac3 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty,
 		priv->free_len += PACKET_SIZE;
 	}
 
-	/*
-	 * Force low latency on. This will immediately push data to the line
-	 * discipline instead of queueing.
-	 */
-
 	if (tty) {
-		tty->low_latency = 1;
 		/* FIXME: These two are bogus */
 		tty->raw = 1;
 		tty->real_raw = 1;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index f530032ed93d..da2a2b46644a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty,
 	if (!buf_flow_init)
 		return -ENOMEM;
 
-	if (tty)
-		tty->low_latency = 1;
-
 	/* --1: Tell the modem to initialize (we think) From sniffs this is
 	 *	always the first thing that gets sent to the modem during
 	 *	opening of the device */
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 2314c6ae4fc2..4473d442b2aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty,
 		tty->termios->c_oflag = 0;
 		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
-		tty->low_latency = 1;
 		priv->poll = 0;
 	 }
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6286baad9392..c148544953b3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty,
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
 	if (tty) {
-		tty->low_latency = 1;
 
 		/* Default to echo off and other sane device settings */
 		tty->termios->c_lflag = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e772cc0a97fd..24e3b5d4b4d4 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty,
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
-
 	/* see if we've set up our endpoint info yet   *
 	 * (can't set it up in mos7720_startup as the  *
 	 * structures were not set up at that time.)   */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 499b7b82a0ec..84fb1dcd30dc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1007,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
 									Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Check to see if we've set up our endpoint info yet    *
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 839583dc8b6a..b500ad10b758 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
 	priv->port = port;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
 			  usb_rcvbulkpipe(priv->udev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 47bd070f24b7..7817b82889ca 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -936,9 +936,6 @@ static int option_open(struct tty_struct *tty,
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	option_send_setup(tty, port);
 
 	return 0;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7da3775a097e..913225c61610 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -598,9 +598,6 @@ static int sierra_open(struct tty_struct *tty,
 		}
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	sierra_send_setup(tty, port);
 
 	/* start up the interrupt endpoint if we have one */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9c4c700c7cc6..0a64bac306ee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -50,11 +50,10 @@
 
 #define TI_TRANSFER_TIMEOUT	2
 
-#define TI_DEFAULT_LOW_LATENCY	0
 #define TI_DEFAULT_CLOSING_WAIT	4000		/* in .01 secs */
 
 /* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS	(ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS	0
 
 /* read urb states */
 #define TI_READ_URB_RUNNING	0
@@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
 
 /* module parameters */
 static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 static unsigned int vendor_3410_count;
@@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
-		"TTY low_latency flag, 0=off, 1=on, default is off");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait,
     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
@@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial)
 		spin_lock_init(&tport->tp_lock);
 		tport->tp_uart_base_addr = (i == 0 ?
 				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-		tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
 		init_waitqueue_head(&tport->tp_write_wait);
@@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty,
 	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 		return -ERESTARTSYS;
 
-	if (tty)
-		tty->low_latency =
-				(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
 	port_number = port->number - port->serial->minor;
 
 	memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
@@ -1454,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
 	return 0;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 4facce3d9364..5ac414bda718 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
 			   usb_rcvbulkpipe(serial->dev,